private void btnBurnForcePass_Click(object sender, EventArgs e)
{
if (!rdoBurnOut.Checked || !rdoGood.Checked)
{
UserControl.Message message = new UserControl.Message(MessageType.Error, "$CS_BurnOut_Force_Onely");
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.txtRunningCard.Caption + ": " + this.txtRunningCard.Value, message, true);
return;
}
FAuthentication fAuthentication = new FAuthentication("BURNRIGHTUSER");
fAuthentication.Owner = this;
fAuthentication.StartPosition = FormStartPosition.CenterScreen;
fAuthentication.ShowDialog();
fAuthentication = null;
if (FAuthentication.m_isRightUser == true)
{
isForce = true;
userCode = FAuthentication.m_UserCode;
this.CheckAndRunOnWip();
}
}
protected void ShowMessage(UserControl.Message message)
{
ApplicationRun.GetInfoForm().Add(message);
}
// Added by Icyer 2006/12/15
// 检查产品
private Messages CheckProduct(object act, string runningCard)
{
// 查询产品信息
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
try
{
//为改善性能
((SQLDomainDataProvider)domainProvider).PersistBroker.AutoCloseConnection = false;
((SQLDomainDataProvider)domainProvider).PersistBroker.OpenConnection();
ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider);
// Added by Icyer 2007/03/16 如果归属工单，则做归属工单检查，否则做序列号途程检查
UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard);
ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0];
MO moWillGo = null;
ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider);
Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(((IDCTClient)act).ResourceCode, runningCard);
if (msgMo.IsSuccess() == false) // 如果有错误，表示需要归属工单，但是解析工单或查询工单发生错误
{
return(msgMo);
}
if (msgMo.GetData() != null) // 需要归属工单，做归属工单检查
{
product.NowSimulation = new BenQGuru.eMES.Domain.DataCollect.Simulation();
UserControl.Message msgMoData = msgMo.GetData();
moWillGo = (MO)msgMoData.Values[0];
moCode = moWillGo.MOCode;
ActionGoToMO goToMO = new ActionGoToMO(domainProvider);
GoToMOActionEventArgs MOActionEventArgs = new GoToMOActionEventArgs(
ActionType.DataCollectAction_GoMO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product,
moWillGo.MOCode);
msgMo = goToMO.CheckIn(MOActionEventArgs);
if (!MOActionEventArgs.PassCheck)
{
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
}
else // 不需要归属工单，检查序列号途程
{
if (product == null || product.LastSimulation == null)
{
msgProduct.ClearMessages();
msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
return(msgProduct);
}
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
if (msgMo.IsSuccess() == false)
{
return(msgMo);
}
// Added end
keypartsHT = new Hashtable();
keypartsHT.Add("ProdcutInfo", product);
keypartsHT.Add("MOWillGo", moWillGo);
IDCTClient client = act as IDCTClient;
OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider);
MOFacade moFacade = new MOFacade(domainProvider);
object[] objBomDetail = null;
Messages messages1 = new Messages();
if (moWillGo == null)
{
// 检查途程
messages1 = _helper.CheckID(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
product.LastSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
null,
null));
}
if (messages1.IsSuccess() == true)
{
//objBomDetail = opBOMFacade.GetOPBOMDetails(
// product.NowSimulation.MOCode,
// product.NowSimulation.RouteCode,
// product.NowSimulation.OPCode);
//Miodified by Scott
MO moNew = (MO)moFacade.GetMO(product.NowSimulation.MOCode);
objBomDetail = opBOMFacade.QueryOPBOMDetail(product.NowSimulation.ItemCode, string.Empty, string.Empty, moNew.BOMVersion,
product.NowSimulation.RouteCode, product.NowSimulation.OPCode, (int)MaterialType.CollectMaterial,
int.MinValue, int.MaxValue, moNew.OrganizationID, true);
if (objBomDetail == null)
{
messages1.Add(new UserControl.Message(MessageType.Error, "$CS_OPBOM_NotFound"));
}
}
else
{
return(messages1);
}
//object mo = moFacade.GetMO( product.LastSimulation.MOCode );
object mo = moWillGo;
if (moWillGo == null)
{
mo = moFacade.GetMO(product.LastSimulation.MOCode);
}
//OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider);
// 查询OPBOM
if (objBomDetail == null)
{
msgProduct.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode=" + product.NowSimulation.MOCode
+ " $CS_Param_RouteCode=" + product.NowSimulation.RouteCode
+ " $CS_Param_OPCode =" + product.NowSimulation.OPCode));
return(msgProduct);
}
else
{
this.filterOpBomDetail(ref objBomDetail);
if (objBomDetail == null || objBomDetail.Length <= 0)
{
msgProduct.Add(new Message(MessageType.Error, "$CS_OPBOM_NotFound"));
return(msgProduct);
}
for (int i = 0; i < objBomDetail.Length; i++)
{
if (((OPBOMDetail)objBomDetail[i]).OPBOMItemControlType == "item_control_lot")
{
opBomDetailCount += 1;
}
else
{
opBomDetailCount += Convert.ToInt32(((OPBOMDetail)objBomDetail[i]).OPBOMItemQty);
}
}
for (int i = 0; i < objBomDetail.Length; i++)
{
if (((OPBOMDetail)objBomDetail[i]).OPBOMItemControlType == "item_control_lot")
{
opBomDetailList.Add(objBomDetail[i]);
}
else
{
int number = Convert.ToInt32(((OPBOMDetail)objBomDetail[i]).OPBOMItemQty);
for (int j = 0; j < number; j++)
{
opBomDetailList.Add(objBomDetail[i]);
}
}
}
if (((OPBOMDetail)objBomDetail[0]).OPBOMItemControlType == BOMItemControlType.ITEM_CONTROL_LOT)
{
msgProduct.Add(new UserControl.Message(MessageType.Normal, ">>$DCT_PLEASE_INPUT_Lot " + ((OPBOMDetail)objBomDetail[0]).OPBOMSourceItemCode));
}
else
{
msgProduct.Add(new UserControl.Message(MessageType.Normal, ">>$DCT_PLEASE_INPUT_Keyparts " + ((OPBOMDetail)objBomDetail[0]).OPBOMSourceItemCode));
}
// keypartsHT.Add("KeypartsInfo", opBomKeyparts);
keypartsHT.Add("Opbomdetail", objBomDetail);
}
return(msgProduct);
}
catch (Exception ex)
{
throw ex;
}
finally
{
((SQLDomainDataProvider)domainProvider).PersistBroker.CloseConnection();
((SQLDomainDataProvider)domainProvider).PersistBroker.AutoCloseConnection = true;
}
}
// Added by Icyer 2006/12/15
// 检查产品
private Messages CheckProduct(object act, string runningCard)
{
// 查询产品信息
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider);
/* Removed by Icyer 2007/03/16
* UserControl.Messages msgProduct = _helper.GetIDInfo( runningCard ) ;
* ProductInfo product= (ProductInfo)msgProduct.GetData().Values[0];
* if (product == null || product.LastSimulation == null)
* {
* msgProduct.ClearMessages();
* msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
* return msgProduct;
* }
*/
// Added by Icyer 2007/03/16 如果归属工单，则做归属工单检查，否则做序列号途程检查
UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard);
ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0];
MO moWillGo = null;
ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider);
Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(((IDCTClient)act).ResourceCode, runningCard);
if (msgMo.IsSuccess() == false) // 如果有错误，表示需要归属工单，但是解析工单或查询工单发生错误
{
return(msgMo);
}
if (msgMo.GetData() != null) // 需要归属工单，做归属工单检查
{
product.NowSimulation = new BenQGuru.eMES.Domain.DataCollect.Simulation();
UserControl.Message msgMoData = msgMo.GetData();
moWillGo = (MO)msgMoData.Values[0];
ActionGoToMO goToMO = new ActionGoToMO(domainProvider);
GoToMOActionEventArgs MOActionEventArgs = new GoToMOActionEventArgs(
ActionType.DataCollectAction_GoMO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product,
moWillGo.MOCode);
msgMo = goToMO.CheckIn(MOActionEventArgs);
if (!MOActionEventArgs.PassCheck)
{
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
}
else // 不需要归属工单，检查序列号途程
{
if (product == null || product.LastSimulation == null)
{
msgProduct.ClearMessages();
msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
return(msgProduct);
}
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
if (msgMo.IsSuccess() == false)
{
return(msgMo);
}
// Added end
keypartsHT = new Hashtable();
keypartsHT.Add("ProdcutInfo", msgProduct);
keypartsHT.Add("MOWillGo", moWillGo);
IDCTClient client = act as IDCTClient;
OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider);
object[] objBomDetail = null;
Messages messages1 = new Messages();
if (moWillGo == null)
{
// 检查途程
messages1 = _helper.CheckID(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
product.LastSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
null,
null));
}
if (messages1.IsSuccess() == true)
{
objBomDetail = opBOMFacade.GetOPBOMDetails(
product.NowSimulation.MOCode,
product.NowSimulation.RouteCode,
product.NowSimulation.OPCode);
}
else
{
return(messages1);
}
MOFacade moFacade = new MOFacade(domainProvider);
//object mo = moFacade.GetMO( product.LastSimulation.MOCode );
object mo = moWillGo;
if (moWillGo == null)
{
mo = moFacade.GetMO(product.LastSimulation.MOCode);
}
// 查询OPBOM
OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider);
if (opBomKeyparts.Count == 0)
{
msgProduct.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode=" + product.NowSimulation.MOCode
+ " $CS_Param_RouteCode=" + product.NowSimulation.RouteCode
+ " $CS_Param_OPCode =" + product.NowSimulation.OPCode));
return(msgProduct);
}
else
{
this.OutMesssage = new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts " + (opBomKeyparts.GetbomKeypartCount() + 1).ToString() + "/" + opBomKeyparts.Count.ToString());
keypartsHT.Add("KeypartsInfo", opBomKeyparts);
}
return(msgProduct);
}
private void CheckAndRunOnWip()
{
if (txtRunningCard.Value.Trim() == string.Empty)
{
if (!this.txtGOMO.Checked)
{
txtMO.Value = String.Empty;
txtItem.Value = String.Empty;
labelItemDescription.Text = "";
}
ApplicationRun.GetInfoForm().AddEx("$CS_Please_Input_RunningCard");
//将焦点移到产品序列号输入框
txtRunningCard.TextFocus(false, true);
return;
}
else
{
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
BurnFacade burnFacade = new BurnFacade(this.DataProvider);
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceCard = dataCollectFacade.GetSourceCard(this.txtRunningCard.Value.Trim().ToUpper(), string.Empty);
if (this.txtGOMO.Checked && this.txtGOMO.Value.Trim().Length == 0)
{
ApplicationRun.GetInfoForm().AddEx("$CS_CMPleaseInputMO");
this.txtGOMO.Checked = true;
this.txtGOMO.TextFocus(false, true);
return;
}
if (this.txtGOMO.Checked && this.txtGOMO.InnerTextBox.Enabled)
{
ApplicationRun.GetInfoForm().AddEx("$CS_PleasePressEnterOnGOMO");
this.txtGOMO.Checked = true;
this.txtGOMO.TextFocus(false, true);
return;
}
// End Added
//Add by sandy on 20140528
if (rdoBurnIn.Checked && rdoNG.Checked)
{
UserControl.Message message = new UserControl.Message(MessageType.Error, "$CS_BurnIn_Can_Not_NG");
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.txtRunningCard.Caption + ": " + this.txtRunningCard.Value, message, true);
txtRunningCard.TextFocus(false, true);
return;
}
//end
if (txtRunningCard.Value.Trim().ToUpper() == ng_collect)
{
rdoNG.Checked = true;
rdoBurnOut.Checked = true;
txtRunningCard.TextFocus(false, true);
return;
}
//Jarvis 20130125 支持GOOD指令
if (txtRunningCard.Value.Trim().ToUpper() == good_collect)
{
rdoGood.Checked = true;
txtRunningCard.TextFocus(false, true);
return;
}
//Add by sandy on 20140528
if (txtRunningCard.Value.Trim().ToUpper() == ActionType.DataCollectAction_BurnIn)
{
rdoGood.Checked = true;
rdoBurnIn.Checked = true;
txtRunningCard.TextFocus(false, true);
return;
}
if (txtRunningCard.Value.Trim().ToUpper() == ActionType.DataCollectAction_BurnOutGood)
{
rdoGood.Checked = true;
rdoBurnOut.Checked = true;
txtRunningCard.TextFocus(false, true);
return;
}
if (txtRunningCard.Value.Trim().ToUpper() == ActionType.DataCollectAction_BurnOutNG)
{
rdoNG.Checked = true;
rdoBurnOut.Checked = true;
txtRunningCard.TextFocus(false, true);
return;
}
//End
//add by hiro.chen 08/11/18 TocheckIsDown
Messages msg = new Messages();
msg.AddMessages(dataCollectFacade.CheckISDown(sourceCard.Trim().ToUpper()));
if (!msg.IsSuccess())
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.txtRunningCard.Caption + ":" + this.txtRunningCard.Value, msg, true);
txtRunningCard.TextFocus(false, true);
return;
}
//end
//报废不能返工
msg.AddMessages(dataCollectFacade.CheckReworkRcardIsScarp(sourceCard.Trim().ToUpper(), ApplicationService.Current().ResourceCode));
if (!msg.IsSuccess())
{
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.txtRunningCard.Caption + ":" + this.txtRunningCard.Value, msg, true);
txtRunningCard.TextFocus(false, true);
return;
}
//end
//Laws Lu,2005/10/19,新增 缓解性能问题
//Laws Lu,2006/12/25 修改 减少Open/Close的次数
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.AutoCloseConnection = false;
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.OpenConnection();
//Laws Lu,2005/08/16,修改 把msg换成globeMSG
globeMSG = CheckProduct();
// Added by Icyer 2005/10/28
if (Resource == null)
{
BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider);
Resource = (Domain.BaseSetting.Resource)dataModel.GetResource(ApplicationService.Current().ResourceCode);
}
actionCheckStatus = new ActionCheckStatus();
actionCheckStatus.ProductInfo = product;
if (actionCheckStatus.ProductInfo != null)
{
actionCheckStatus.ProductInfo.Resource = Resource;
}
string strMoCode = String.Empty;
if (product != null && product.LastSimulation != null)
{
strMoCode = product.LastSimulation.MOCode;
}
if (strMoCode != String.Empty)
{
if (listActionCheckStatus.ContainsKey(strMoCode))
{
actionCheckStatus = (ActionCheckStatus)listActionCheckStatus[strMoCode];
actionCheckStatus.ProductInfo = product;
actionCheckStatus.ActionList = new ArrayList();
}
else
{
listActionCheckStatus.Add(strMoCode, actionCheckStatus);
}
}
//Amoi,Laws Lu,2005/08/02,修改
if (txtGOMO.Checked == true)
{
globeMSG.AddMessages(RunGOMO(actionCheckStatus));
if (!globeMSG.IsSuccess())
{
listActionCheckStatus.Clear();
}
}
else
{
if (product != null && product.LastSimulation != null)
{
this.txtMO.Value = product.LastSimulation.MOCode;
this.txtItem.Value = product.LastSimulation.ItemCode;
this.labelItemDescription.Text = this.GetItemDescription(product.LastSimulation.ItemCode, GlobalVariables.CurrentOrganizations.First().OrganizationID);
}
else
{
this.txtMO.Value = "";
this.txtItem.Value = "";
this.labelItemDescription.Text = "";
}
}
//EndAmoi
//老化进和老化出工序不能同时勾选
BaseModelFacade baseModelFacade = new BaseModelFacade(this.DataProvider);
ItemFacade itemFacade = new ItemFacade(this.DataProvider);
object objOP = baseModelFacade.GetOperationByResource(ApplicationService.Current().ResourceCode);
if (product != null && product.LastSimulation != null && objOP != null)
{
object objOp = itemFacade.GetItemRoute2Operation(this.txtItem.Value, product.LastSimulation.RouteCode,
((Operation2Resource)objOP).OPCode);
if (objOp != null)
{
opControl = ((ItemRoute2OP)objOp).OPControl;
if (opControl[(int)OperationList.BurnIn] == isSelected && opControl[(int)OperationList.BurnOut] == isSelected)
{
globeMSG.Add(new UserControl.Message(MessageType.Error, "$CS_BurnInOut_Can_Not_Choose_Together"));
}
}
}
//老化未达到预计时间且不是强制老化时不可做老化出良品采集
if (!isForce && globeMSG.IsSuccess() && rdoBurnOut.Checked && rdoGood.Checked && product.LastSimulation != null)
{
object objBurnWip = burnFacade.GetBurnWip(sourceCard.Trim().ToUpper(), product.LastSimulation.MOCode);
BurnWip burnWip = objBurnWip as BurnWip;
if (objBurnWip != null && burnWip.Status == BurnType.BurnIn)
{
DateTime dtForecast = FormatHelper.ToDateTime(burnWip.ForecastOutDate, burnWip.ForecastOutTime);
if (dbDateTime.DateTime < dtForecast)
{
globeMSG.Add(new UserControl.Message(MessageType.Error, "$CS_Burn_Time_Not_Enough"));
}
}
}
if (globeMSG.IsSuccess())
{
this.RunOnWip();
}
}
//刷新grid
this.BindGrid();
//Laws Lu,2005/10/19,新增 缓解性能问题
//Laws Lu,2006/12/25 修改 减少Open/Close的次数
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection();
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.AutoCloseConnection = true;
//将焦点移到产品序列号输入框
ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.txtRunningCard.Caption + ": " + this.txtRunningCard.Value, globeMSG, true);
//Application.DoEvents();
txtRunningCard.TextFocus(false, true);
globeMSG.ClearMessages();
}
public Messages CheckProduct(string rcard, object act)
{
currentProductInfo = null;
moWillGo = null;
Messages msg = new Messages();
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider);
msg = _helper.GetIDInfo(rcard);
if (msg.IsSuccess())
{
IDCTClient client = (IDCTClient)act;
ProductInfo product = (ProductInfo)msg.GetData().Values[0];
bool bNeedCheckMO = false;
if (product == null || product.LastSimulation == null)
{
/* 需要再检查是否归属工单
* msg.Add(new UserControl.Message(UserControl.MessageType.Error,"$NoSimulation"));
* return msg;
*/
bNeedCheckMO = true;
}
else
{
// 如果完工，并且当前资源不属于Simulation的当前工序，则需要检查归属工单
if (product.LastSimulation.IsComplete == "1")
{
BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider);
if (dataModel.GetOperation2Resource(product.LastSimulation.OPCode, client.ResourceCode) == null)
{
bNeedCheckMO = true;
}
}
}
Messages msgChkErr = new Messages();
if (bNeedCheckMO == true)
{
ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider);
Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(client.ResourceCode, rcard);
if (msgMo.IsSuccess() == false) // 如果有错误，表示需要归属工单，但是解析工单或查询工单发生错误
{
msgChkErr.AddMessages(msgMo);
}
else // 返回成功，有两种情况：需要归属工单并且返回正确的工单信息；不需要归属工单
{
UserControl.Message msgMoData = msgMo.GetData();
if (msgMoData != null && msgMoData.Values.Length > 0) // 有DATA数据，表示需要归属工单
{
this.moWillGo = (MO)msgMoData.Values[0];
}
else // 如果没有DATA数据，表示不需要归属工单，则调用以前的代码：如果LastSimulation为空，则报没有序列号
{
if (product.LastSimulation == null)
{
msgChkErr.Add(new UserControl.Message(UserControl.MessageType.Error, "$NoSimulation"));
}
}
}
}
if (msgChkErr.IsSuccess() == false)
{
return(msgChkErr);
}
if (product.LastSimulation != null) // 只有在序列号存在的情况下才检查途程
{
msg = _helper.CheckID(new TSActionEventArgs(ActionType.DataCollectAction_NG,
rcard,
client.LoginedUser,
client.ResourceCode,
product,
new object[] {},
null,
""));
}
if (product.LastSimulation == null || msg.IsSuccess() == true)
{
currentProductInfo = product;
}
else if (product.LastSimulation.LastAction == ActionType.DataCollectAction_GOOD ||
product.LastSimulation.LastAction == ActionType.DataCollectAction_NG ||
product.LastSimulation.LastAction == ActionType.DataCollectAction_OutLineGood ||
product.LastSimulation.LastAction == ActionType.DataCollectAction_OutLineNG) // 允许测试站重复采集
{
BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider);
if (dataModel.GetOperation2Resource(product.LastSimulation.OPCode, (act as IDCTClient).ResourceCode) != null)
{
msg.ClearMessages();
currentProductInfo = product;
}
}
}
return(msg);
}
public void AddEx(string function, string inputContent, UserControl.Message message, bool recordWorkingError)
{
UserControl.Messages messages = new UserControl.Messages();
messages.Add(message);
AddEx(function, inputContent, messages, recordWorkingError);
}
public void Add(UserControl.Message message)
{
UserControl.Messages messages = new UserControl.Messages();
messages.Add(message);
this.Add(messages);
}
