/// <summary>
/// <para>
/// Compare equality to another IrradiationDose within the given absolute or relative tolerance.
/// </para>
/// <para>
/// Relative tolerance is defined as the maximum allowable absolute difference between this quantity's value and
/// <paramref name="other"/> as a percentage of this quantity's value. <paramref name="other"/> will be converted into
/// this quantity's unit for comparison. A relative tolerance of 0.01 means the absolute difference must be within +/- 1% of
/// this quantity's value to be considered equal.
/// <example>
/// In this example, the two quantities will be equal if the value of b is within +/- 1% of a (0.02m or 2cm).
/// <code>
/// var a = Length.FromMeters(2.0);
/// var b = Length.FromInches(50.0);
/// a.Equals(b, 0.01, ComparisonType.Relative);
/// </code>
/// </example>
/// </para>
/// <para>
/// Absolute tolerance is defined as the maximum allowable absolute difference between this quantity's value and
/// <paramref name="other"/> as a fixed number in this quantity's unit. <paramref name="other"/> will be converted into
/// this quantity's unit for comparison.
/// <example>
/// In this example, the two quantities will be equal if the value of b is within 0.01 of a (0.01m or 1cm).
/// <code>
/// var a = Length.FromMeters(2.0);
/// var b = Length.FromInches(50.0);
/// a.Equals(b, 0.01, ComparisonType.Absolute);
/// </code>
/// </example>
/// </para>
/// <para>
/// Note that it is advised against specifying zero difference, due to the nature
/// of floating point operations and using System.Double internally.
/// </para>
/// </summary>
/// <param name="other">The other quantity to compare to.</param>
/// <param name="tolerance">The absolute or relative tolerance value. Must be greater than or equal to 0.</param>
/// <param name="comparisonType">The comparison type: either relative or absolute.</param>
/// <returns>True if the absolute difference between the two values is not greater than the specified relative or absolute tolerance.</returns>
public bool Equals(IrradiationDose other, double tolerance, ComparisonType comparisonType)
{
if (tolerance < 0)
{
throw new ArgumentOutOfRangeException("tolerance", "Tolerance must be greater than or equal to 0.");
}
double thisValue = (double)this.Value;
double otherValueInThisUnits = other.As(this.Unit);
return(UnitsNet.Comparison.Equals(thisValue, otherValueInThisUnits, tolerance, comparisonType));
}
/// <summary>
/// Try to dynamically construct a quantity.
/// </summary>
/// <param name="value">Numeric value.</param>
/// <param name="unit">Unit enum value.</param>
/// <param name="quantity">The resulting quantity if successful, otherwise <c>default</c>.</param>
/// <returns><c>True</c> if successful with <paramref name="quantity"/> assigned the value, otherwise <c>false</c>.</returns>
internal static bool TryFrom(double value, Enum unit, out IQuantity quantity)
{
switch (unit)
{
case AccelerationUnit accelerationUnit:
quantity = Acceleration.From(value, accelerationUnit);
return(true);
case AmountOfSubstanceUnit amountOfSubstanceUnit:
quantity = AmountOfSubstance.From(value, amountOfSubstanceUnit);
return(true);
case AmplitudeRatioUnit amplitudeRatioUnit:
quantity = AmplitudeRatio.From(value, amplitudeRatioUnit);
return(true);
case AngleUnit angleUnit:
quantity = Angle.From(value, angleUnit);
return(true);
case ApparentEnergyUnit apparentEnergyUnit:
quantity = ApparentEnergy.From(value, apparentEnergyUnit);
return(true);
case ApparentPowerUnit apparentPowerUnit:
quantity = ApparentPower.From(value, apparentPowerUnit);
return(true);
case AreaUnit areaUnit:
quantity = Area.From(value, areaUnit);
return(true);
case AreaDensityUnit areaDensityUnit:
quantity = AreaDensity.From(value, areaDensityUnit);
return(true);
case AreaMomentOfInertiaUnit areaMomentOfInertiaUnit:
quantity = AreaMomentOfInertia.From(value, areaMomentOfInertiaUnit);
return(true);
case BitRateUnit bitRateUnit:
quantity = BitRate.From(value, bitRateUnit);
return(true);
case BrakeSpecificFuelConsumptionUnit brakeSpecificFuelConsumptionUnit:
quantity = BrakeSpecificFuelConsumption.From(value, brakeSpecificFuelConsumptionUnit);
return(true);
case CapacitanceUnit capacitanceUnit:
quantity = Capacitance.From(value, capacitanceUnit);
return(true);
case CoefficientOfThermalExpansionUnit coefficientOfThermalExpansionUnit:
quantity = CoefficientOfThermalExpansion.From(value, coefficientOfThermalExpansionUnit);
return(true);
case DensityUnit densityUnit:
quantity = Density.From(value, densityUnit);
return(true);
case DurationUnit durationUnit:
quantity = Duration.From(value, durationUnit);
return(true);
case DynamicViscosityUnit dynamicViscosityUnit:
quantity = DynamicViscosity.From(value, dynamicViscosityUnit);
return(true);
case ElectricAdmittanceUnit electricAdmittanceUnit:
quantity = ElectricAdmittance.From(value, electricAdmittanceUnit);
return(true);
case ElectricChargeUnit electricChargeUnit:
quantity = ElectricCharge.From(value, electricChargeUnit);
return(true);
case ElectricChargeDensityUnit electricChargeDensityUnit:
quantity = ElectricChargeDensity.From(value, electricChargeDensityUnit);
return(true);
case ElectricConductanceUnit electricConductanceUnit:
quantity = ElectricConductance.From(value, electricConductanceUnit);
return(true);
case ElectricConductivityUnit electricConductivityUnit:
quantity = ElectricConductivity.From(value, electricConductivityUnit);
return(true);
case ElectricCurrentUnit electricCurrentUnit:
quantity = ElectricCurrent.From(value, electricCurrentUnit);
return(true);
case ElectricCurrentDensityUnit electricCurrentDensityUnit:
quantity = ElectricCurrentDensity.From(value, electricCurrentDensityUnit);
return(true);
case ElectricCurrentGradientUnit electricCurrentGradientUnit:
quantity = ElectricCurrentGradient.From(value, electricCurrentGradientUnit);
return(true);
case ElectricFieldUnit electricFieldUnit:
quantity = ElectricField.From(value, electricFieldUnit);
return(true);
case ElectricInductanceUnit electricInductanceUnit:
quantity = ElectricInductance.From(value, electricInductanceUnit);
return(true);
case ElectricPotentialUnit electricPotentialUnit:
quantity = ElectricPotential.From(value, electricPotentialUnit);
return(true);
case ElectricPotentialAcUnit electricPotentialAcUnit:
quantity = ElectricPotentialAc.From(value, electricPotentialAcUnit);
return(true);
case ElectricPotentialDcUnit electricPotentialDcUnit:
quantity = ElectricPotentialDc.From(value, electricPotentialDcUnit);
return(true);
case ElectricResistanceUnit electricResistanceUnit:
quantity = ElectricResistance.From(value, electricResistanceUnit);
return(true);
case ElectricResistivityUnit electricResistivityUnit:
quantity = ElectricResistivity.From(value, electricResistivityUnit);
return(true);
case ElectricSurfaceChargeDensityUnit electricSurfaceChargeDensityUnit:
quantity = ElectricSurfaceChargeDensity.From(value, electricSurfaceChargeDensityUnit);
return(true);
case EnergyUnit energyUnit:
quantity = Energy.From(value, energyUnit);
return(true);
case EntropyUnit entropyUnit:
quantity = Entropy.From(value, entropyUnit);
return(true);
case ForceUnit forceUnit:
quantity = Force.From(value, forceUnit);
return(true);
case ForceChangeRateUnit forceChangeRateUnit:
quantity = ForceChangeRate.From(value, forceChangeRateUnit);
return(true);
case ForcePerLengthUnit forcePerLengthUnit:
quantity = ForcePerLength.From(value, forcePerLengthUnit);
return(true);
case FrequencyUnit frequencyUnit:
quantity = Frequency.From(value, frequencyUnit);
return(true);
case FuelEfficiencyUnit fuelEfficiencyUnit:
quantity = FuelEfficiency.From(value, fuelEfficiencyUnit);
return(true);
case HeatFluxUnit heatFluxUnit:
quantity = HeatFlux.From(value, heatFluxUnit);
return(true);
case HeatTransferCoefficientUnit heatTransferCoefficientUnit:
quantity = HeatTransferCoefficient.From(value, heatTransferCoefficientUnit);
return(true);
case IlluminanceUnit illuminanceUnit:
quantity = Illuminance.From(value, illuminanceUnit);
return(true);
case InformationUnit informationUnit:
quantity = Information.From(value, informationUnit);
return(true);
case IrradianceUnit irradianceUnit:
quantity = Irradiance.From(value, irradianceUnit);
return(true);
case IrradiationUnit irradiationUnit:
quantity = Irradiation.From(value, irradiationUnit);
return(true);
case IrradiationDoseUnit irradiationDoseUnit:
quantity = IrradiationDose.From(value, irradiationDoseUnit);
return(true);
case KinematicViscosityUnit kinematicViscosityUnit:
quantity = KinematicViscosity.From(value, kinematicViscosityUnit);
return(true);
case LapseRateUnit lapseRateUnit:
quantity = LapseRate.From(value, lapseRateUnit);
return(true);
case LengthUnit lengthUnit:
quantity = Length.From(value, lengthUnit);
return(true);
case LevelUnit levelUnit:
quantity = Level.From(value, levelUnit);
return(true);
case LinearDensityUnit linearDensityUnit:
quantity = LinearDensity.From(value, linearDensityUnit);
return(true);
case LuminosityUnit luminosityUnit:
quantity = Luminosity.From(value, luminosityUnit);
return(true);
case LuminousFluxUnit luminousFluxUnit:
quantity = LuminousFlux.From(value, luminousFluxUnit);
return(true);
case LuminousIntensityUnit luminousIntensityUnit:
quantity = LuminousIntensity.From(value, luminousIntensityUnit);
return(true);
case MagneticFieldUnit magneticFieldUnit:
quantity = MagneticField.From(value, magneticFieldUnit);
return(true);
case MagneticFluxUnit magneticFluxUnit:
quantity = MagneticFlux.From(value, magneticFluxUnit);
return(true);
case MagnetizationUnit magnetizationUnit:
quantity = Magnetization.From(value, magnetizationUnit);
return(true);
case MassUnit massUnit:
quantity = Mass.From(value, massUnit);
return(true);
case MassConcentrationUnit massConcentrationUnit:
quantity = MassConcentration.From(value, massConcentrationUnit);
return(true);
case MassFlowUnit massFlowUnit:
quantity = MassFlow.From(value, massFlowUnit);
return(true);
case MassFluxUnit massFluxUnit:
quantity = MassFlux.From(value, massFluxUnit);
return(true);
case MassFractionUnit massFractionUnit:
quantity = MassFraction.From(value, massFractionUnit);
return(true);
case MassMomentOfInertiaUnit massMomentOfInertiaUnit:
quantity = MassMomentOfInertia.From(value, massMomentOfInertiaUnit);
return(true);
case MolarEnergyUnit molarEnergyUnit:
quantity = MolarEnergy.From(value, molarEnergyUnit);
return(true);
case MolarEntropyUnit molarEntropyUnit:
quantity = MolarEntropy.From(value, molarEntropyUnit);
return(true);
case MolarityUnit molarityUnit:
quantity = Molarity.From(value, molarityUnit);
return(true);
case MolarMassUnit molarMassUnit:
quantity = MolarMass.From(value, molarMassUnit);
return(true);
case PermeabilityUnit permeabilityUnit:
quantity = Permeability.From(value, permeabilityUnit);
return(true);
case PermittivityUnit permittivityUnit:
quantity = Permittivity.From(value, permittivityUnit);
return(true);
case PowerUnit powerUnit:
quantity = Power.From(value, powerUnit);
return(true);
case PowerDensityUnit powerDensityUnit:
quantity = PowerDensity.From(value, powerDensityUnit);
return(true);
case PowerRatioUnit powerRatioUnit:
quantity = PowerRatio.From(value, powerRatioUnit);
return(true);
case PressureUnit pressureUnit:
quantity = Pressure.From(value, pressureUnit);
return(true);
case PressureChangeRateUnit pressureChangeRateUnit:
quantity = PressureChangeRate.From(value, pressureChangeRateUnit);
return(true);
case RatioUnit ratioUnit:
quantity = Ratio.From(value, ratioUnit);
return(true);
case RatioChangeRateUnit ratioChangeRateUnit:
quantity = RatioChangeRate.From(value, ratioChangeRateUnit);
return(true);
case ReactiveEnergyUnit reactiveEnergyUnit:
quantity = ReactiveEnergy.From(value, reactiveEnergyUnit);
return(true);
case ReactivePowerUnit reactivePowerUnit:
quantity = ReactivePower.From(value, reactivePowerUnit);
return(true);
case RotationalAccelerationUnit rotationalAccelerationUnit:
quantity = RotationalAcceleration.From(value, rotationalAccelerationUnit);
return(true);
case RotationalSpeedUnit rotationalSpeedUnit:
quantity = RotationalSpeed.From(value, rotationalSpeedUnit);
return(true);
case RotationalStiffnessUnit rotationalStiffnessUnit:
quantity = RotationalStiffness.From(value, rotationalStiffnessUnit);
return(true);
case RotationalStiffnessPerLengthUnit rotationalStiffnessPerLengthUnit:
quantity = RotationalStiffnessPerLength.From(value, rotationalStiffnessPerLengthUnit);
return(true);
case SolidAngleUnit solidAngleUnit:
quantity = SolidAngle.From(value, solidAngleUnit);
return(true);
case SpecificEnergyUnit specificEnergyUnit:
quantity = SpecificEnergy.From(value, specificEnergyUnit);
return(true);
case SpecificEntropyUnit specificEntropyUnit:
quantity = SpecificEntropy.From(value, specificEntropyUnit);
return(true);
case SpecificVolumeUnit specificVolumeUnit:
quantity = SpecificVolume.From(value, specificVolumeUnit);
return(true);
case SpecificWeightUnit specificWeightUnit:
quantity = SpecificWeight.From(value, specificWeightUnit);
return(true);
case SpeedUnit speedUnit:
quantity = Speed.From(value, speedUnit);
return(true);
case TemperatureUnit temperatureUnit:
quantity = Temperature.From(value, temperatureUnit);
return(true);
case TemperatureChangeRateUnit temperatureChangeRateUnit:
quantity = TemperatureChangeRate.From(value, temperatureChangeRateUnit);
return(true);
case TemperatureDeltaUnit temperatureDeltaUnit:
quantity = TemperatureDelta.From(value, temperatureDeltaUnit);
return(true);
case ThermalConductivityUnit thermalConductivityUnit:
quantity = ThermalConductivity.From(value, thermalConductivityUnit);
return(true);
case ThermalResistanceUnit thermalResistanceUnit:
quantity = ThermalResistance.From(value, thermalResistanceUnit);
return(true);
case TorqueUnit torqueUnit:
quantity = Torque.From(value, torqueUnit);
return(true);
case TorquePerLengthUnit torquePerLengthUnit:
quantity = TorquePerLength.From(value, torquePerLengthUnit);
return(true);
case VitaminAUnit vitaminAUnit:
quantity = VitaminA.From(value, vitaminAUnit);
return(true);
case VolumeUnit volumeUnit:
quantity = Volume.From(value, volumeUnit);
return(true);
case VolumeConcentrationUnit volumeConcentrationUnit:
quantity = VolumeConcentration.From(value, volumeConcentrationUnit);
return(true);
case VolumeFlowUnit volumeFlowUnit:
quantity = VolumeFlow.From(value, volumeFlowUnit);
return(true);
case VolumePerLengthUnit volumePerLengthUnit:
quantity = VolumePerLength.From(value, volumePerLengthUnit);
return(true);
default:
{
quantity = default(IQuantity);
return(false);
}
}
}
// Windows Runtime Component does not allow public methods/ctors with same number of parameters: https://msdn.microsoft.com/en-us/library/br230301.aspx#Overloaded methods
internal int CompareTo(IrradiationDose other)
{
return(_value.CompareTo(other.AsBaseNumericType(this.Unit)));
}
public bool Equals(IrradiationDose other)
{
return(_value.Equals(other.AsBaseNumericType(this.Unit)));
}
/// <summary>
/// Try to parse a string with one or two quantities of the format "<quantity> <unit>".
/// </summary>
/// <param name="str">String to parse. Typically in the form: {number} {unit}</param>
/// <param name="result">Resulting unit quantity if successful.</param>
/// <returns>True if successful, otherwise false.</returns>
/// <example>
/// Length.Parse("5.5 m", new CultureInfo("en-US"));
/// </example>
/// <param name="cultureName">Name of culture (ex: "en-US") to use when parsing number and unit. Defaults to <see cref="GlobalConfiguration.DefaultCulture" /> if null.</param>
public static bool TryParse([CanBeNull] string str, [CanBeNull] string cultureName, out IrradiationDose result)
{
IFormatProvider provider = GetFormatProviderFromCultureName(cultureName);
return(QuantityParser.Default.TryParse <IrradiationDose, IrradiationDoseUnit>(
str,
provider,
From,
out result));
}
/// <summary>
/// Try to parse a string with one or two quantities of the format "<quantity> <unit>".
/// </summary>
/// <param name="str">String to parse. Typically in the form: {number} {unit}</param>
/// <param name="result">Resulting unit quantity if successful.</param>
/// <example>
/// Length.Parse("5.5 m", new CultureInfo("en-US"));
/// </example>
public static bool TryParse([CanBeNull] string str, out IrradiationDose result)
{
return(TryParse(str, null, out result));
}
/// <inheritdoc />
/// <remarks>Consider using <see cref="Equals(IrradiationDose, double, ComparisonType)"/> for safely comparing floating point values.</remarks>
public bool Equals(IrradiationDose other)
{
return(_value.Equals(other.GetValueAs(this.Unit)));
}
/// <inheritdoc />
public int CompareTo(IrradiationDose other)
{
return(_value.CompareTo(other.GetValueAs(this.Unit)));
}
/// <summary>
/// Try to parse a string with one or two quantities of the format "<quantity> <unit>".
/// </summary>
/// <param name="str">String to parse. Typically in the form: {number} {unit}</param>
/// <param name="result">Resulting unit quantity if successful.</param>
/// <returns>True if successful, otherwise false.</returns>
/// <example>
/// Length.Parse("5.5 m", new CultureInfo("en-US"));
/// </example>
/// <param name="provider">Format to use when parsing number and unit. Defaults to <see cref="CultureInfo.CurrentUICulture" /> if null.</param>
public static bool TryParse([CanBeNull] string str, [CanBeNull] IFormatProvider provider, out IrradiationDose result)
{
return(QuantityParser.Default.TryParse <IrradiationDose, IrradiationDoseUnit>(
str,
provider,
From,
out result));
}