/// <summary>
/// Creates a new winding with no sections and adds it to the list of windings.
/// </summary>
/// <param name="name">Name of the winding.</param>
/// <param name="windingOrder">Order of the winding in the coil.</param>
/// <param name="windingNumber">Used for system determination.</param>
/// <param name="fullCapacity">Are the taps are rated for full capcity or not.</param>
/// <param name="isPrimary">Is the winding primary or secondary.</param>
/// <param name="kva">Rated kVA of the winding.</param>
/// <param name="nominalVoltage">Nominal line voltage of the winding.</param>
/// <param name="voltages">List of voltages of the winding.</param>
/// <param name="phase">Phase of the winding.</param>
/// <param name="connection">Connection of the winding.</param>
public void AddNewWinding(string name, int windingOrder, int windingNumber, bool fullCapacity, bool isPrimary, double kva, double nominalVoltage, double[] voltages,
Phase phase, Connection connection)
{
Winding winding = new Winding(name, windingOrder, windingNumber, fullCapacity, isPrimary, kva * 1000, nominalVoltage, phase, connection, voltages);
BaseWindings.Add(winding);
}
/// <summary>
/// Constructor.
///
/// Note: For a <paramref name="wireMaterial"/> of <see cref="Data.Constants.WireMaterial.COPPER"/> or <see cref="Data.Constants.WireMaterial.ALUMINUM"/> the current density minimum and maximum work as expected.
/// If <paramref name="wireMaterial"/> is <see cref="Data.Constants.WireMaterial.ANY"/> then for the Aluminum wire the maximum current density is capped at 1300, and for the Copper wire the minimum durrent density is capped at 1000.
///
/// </summary>
/// <param name="winding">Winding to add the section to.</param>
/// <param name="order">Order of the section in the coil.</param>
/// <param name="startVoltage">Starting voltage of the section.</param>
/// <param name="endVoltage">Ending voltage of the section.</param>
/// <param name="bulgeFactor">Bulge factor of the section.</param>
/// <param name="margin">Margin of the section.</param>
/// <param name="layerPaper">Total thickness of insulation between layers.</param>
/// <param name="wrap">Total thickness of wrap after the section.</param>
/// <param name="cdMin">Minimum current density for wires to pass.</param>
/// <param name="cdMax">Maximum current density for wires to pass.</param>
/// <param name="wireMaterial">Wire materials to iterate.</param>
/// <param name="wireShape">Wire shapes to iterate.</param>
/// <param name="bifilars">Bifilar ranges to iterate.</param>
/// <param name="wireShapes">Optional parameter used to specify which cominatiopn of wire shapes for iterate over.</param>
public Section(Winding winding, int order, double startVoltage, double endVoltage, double bulgeFactor, double margin, double layerPaper, double wrap, double cdMin, double cdMax, WireMaterial wireMaterial, WireShape wireShape, Bifilar[] bifilars, WireShape[] wireShapes = null)
{
this.Winding = winding;
this.SectionOrder = order;
this.WindingName = winding.Name;
this.Name = "Section " + order;
this.StartingVoltage = startVoltage;
this.EndingVoltage = endVoltage;
this.BulgeFactor = bulgeFactor;
this.Margin = margin;
this.LayerPaper = layerPaper;
this.Wrap = wrap;
this.CurrentDensityMinimum = cdMin;
this.CurrentDensityMaximum = cdMax;
this.IterateWireMaterial = wireMaterial;
this.IterateWireShape = wireShape;
this.BifilarRange = bifilars;
this.IterateWireShapes = wireShapes;
this.Ducts = new List <Duct>();
}
/// <summary>
/// Copy constructor.
///
/// Creates a new winding copy of given winding parameter.
/// </summary>
/// <param name="winding">Winding to copy.</param>
protected internal Winding(Winding winding)
{
this.Name = winding.Name;
this.WindingOrder = winding.WindingOrder;
this.Index = winding.Index;
this.Core = winding.Core;
this.Tube = winding.Tube;
this.FullCapacity = winding.FullCapacity;
this.IsPrimary = winding.IsPrimary;
this.RatedVA = winding.RatedVA;
this.CalcedVA = winding.CalcedVA;
this.NominalVoltage = winding.NominalVoltage;
this.Phase = winding.Phase;
this.Connection = winding.Connection;
this.TapVoltages = winding.TapVoltages;
this.Sections = new List <Section>();
foreach (Section s in winding.Sections)
{
this.Sections.Add(new Section(s));
}
this.SetSectionsToSelf();
}
/// <summary>
/// Add winding to list.
/// </summary>
/// <param name="winding">Winding to add.</param>
public void AddWinding(Winding winding)
{
BaseWindings.Add(winding);
}
/// <summary>
/// Creates a new section and adds it to the given winding.
/// </summary>
/// <param name="winding">Winding to add section to.</param>
/// <param name="order">Order of the section.</param>
/// <param name="startVoltage">Starting voltage of the section.</param>
/// <param name="endVoltage">Ending voltage of the section.</param>
/// <param name="bulgeFactor">Bulge factor of the section.</param>
/// <param name="margin">Margin of the section.</param>
/// <param name="layerPaper">Total layer paper thickness of the section.</param>
/// <param name="wrap">Total wrap thickness of the section.</param>
/// <param name="cdMin">Minimum current density to find wires with.</param>
/// <param name="cdMax">Maximum current density to find wires with.</param>
/// <param name="wireMaterial">Material to find wires with.</param>
/// <param name="wireShape">Shape to find wires with.</param>
/// <param name="bifilars">Bifilars to find wires with.</param>
public void AddSection(Winding winding, int order, double startVoltage, double endVoltage, double bulgeFactor, double margin, double layerPaper, double wrap,
double cdMin, double cdMax, WireMaterial wireMaterial, WireShape wireShape, Bifilar[] bifilars)
{
winding.Sections.Add(new Section(winding, order, startVoltage, endVoltage, bulgeFactor, margin, layerPaper, wrap, cdMin, cdMax, wireMaterial, wireShape, bifilars));
}