Beispiel #1
0
        /// <summary>
        /// 通过从CAD返回的点坐标进行Form中的添加及更新操作
        /// </summary>
        /// <param name="point">获取的点</param>
        /// <param name="BEP">起始点为A 结束点为B</param>
        private void OprateFormData(RxTypeList.AcDbArc arc)
        {
            if (SX_AIX.Text == string.Empty || SY_AIX.Text == string.Empty)
            {
                MessageBox.Show("未初始化参考坐标!请先初始化参考坐标系!");
                return;
            }
            int keepValuePoint = Convert.ToInt16(KeepValue.Text);

            double[] StartPoint = CadOprator.TackAix(arc.StartPoint, RefPoint, ApplyPlantAix.Checked);
            double[] EndPoint   = CadOprator.TackAix(arc.EndPoint, RefPoint, ApplyPlantAix.Checked);
            double[] TCenter    = CadOprator.TackAix(arc.Center, RefPoint, ApplyPlantAix.Checked);
            double   Radius     = Math.Round(arc.Radius / 1000 * 20, keepValuePoint);
            double   StartAngle = Math.Round(arc.StartAngle, keepValuePoint);
            double   EndAngle   = Math.Round(arc.EndAngle, keepValuePoint);
            String   Ttrack     = string.Empty;

            if (SingeRoadSelected.Checked)
            {
                Ttrack = "SingerTrack";
            }
            else
            {
                Ttrack = "DoubleTrack";
            }
            if (WriteObjectToDataGrid(StartPoint, TCenter, Radius, StartAngle, EndAngle, "A", Ttrack))
            {
                if (WriteObjectToDataGrid(EndPoint, 0, "B", Ttrack))
                {
                    ///////////////////////////////////////////////////////
                }
            }
            try
            {
                WriteObjectID(arc.StartPoint, arc.EndPoint, (index + "-A"));
            }
            catch (System.Exception)
            {
                //throw;
            }
            string Res = PlantOnline.WriteTrack("A_" + (index < 10?("0" + index):Convert.ToString(index)), StartPoint, EndPoint, Ttrack, StartAngle, TCenter, EndAngle, 0, Radius, RefPoint);

            if (Res != string.Empty)
            {
                SendDataToSocket(Res);
            }
            index += 1;
            return;
        }
Beispiel #2
0
        private void ManulInputLine_Click(object sender, EventArgs e)
        {
            this.WindowState = FormWindowState.Minimized;
            if (OnlineModel.Checked != true | SX_AIX.Text == string.Empty | SX_AIX.Text == "")
            {
                MessageBox.Show("当前未切换到在线设计模式或未设置参考点坐标!,无法继续后续操作!请选择在线模式!");
                this.WindowState   = FormWindowState.Normal;
                this.StartPosition = FormStartPosition.CenterScreen;
                return;
            }
Reset:
            AcadDocument caddocument = null;

            tAcadApplication.Visible = true;
            try
            {
                this.WindowState = FormWindowState.Minimized;
                tAcadApplication = (AcadApplication)Marshal.GetActiveObject("AutoCAD.Application");
                caddocument      = tAcadApplication.ActiveDocument;
                caddocument.Utility.Prompt("命令已初始化......!");
            }
            catch (COMException)
            {
                //throw;
            }
            object obj, pickedObj = null;

            try
            {
                int JS = 0;
                do
                {
                    JS += 1;
                    try
                    {
                        caddocument.Utility.GetEntity(out obj, out pickedObj, "请选择一个直线或圆弧,取消点击空白区域、右击、ESC命令即可:");
                    }
                    catch (COMException E)
                    {
                        if (((dynamic)E).HResult == -2147352567)
                        {
                            //Console.Write(((dynamic)e).Button);
                            this.WindowState = FormWindowState.Maximized;
                            break;
                        }
                        continue;
                    }
                    var     db         = caddocument.Database;
                    dynamic NlineTaype = ((dynamic)obj).EntityName;
                    string  NlineT     = Convert.ToString(NlineTaype);
                    AcadObj = obj;
                    switch (NlineT)
                    {
                    case "AcDbLine":
                    {
                        //((dynamic)obj).color = caddocument.ActiveLayer.color;
                        RxTypeList.AcadLine RT = new RxTypeList.AcadLine();
                        RT.StartPoint = ((dynamic)obj).StartPoint;
                        RT.EndPoint   = ((dynamic)obj).EndPoint;
                        RT.FwAngle    = ((dynamic)obj).Angle;
                        RT.Length     = ((dynamic)obj).length;
                        double[] LineCenter = new double[3] {
                            0, 0, 0
                        };
                        LineCenter[0]  = RT.StartPoint[0] + (RT.EndPoint[0] - RT.StartPoint[0]) / 2;
                        LineCenter[1]  = RT.StartPoint[1] + (RT.EndPoint[1] - RT.StartPoint[1]) / 2;
                        LineCenter[2]  = RT.StartPoint[2] + (RT.EndPoint[2] - RT.StartPoint[2]) / 2;
                        RT.CenterPoint = LineCenter;
                        double Tangle = (180 / Math.PI) * RT.FwAngle;
                        RT.FwAngle = Math.Round(Tangle, 1);
                        OprateFormData(RT);
                        string str = PlantOnline.WriteFence(RT.Length, RT.CenterPoint, RT.FwAngle, RefPoint);
                        if (str != string.Empty)
                        {
                            SendDataToSocket(str);
                        }
                        break;
                    }

                    case "AcDbArc":
                    {
                        //((dynamic)obj).color = caddocument.ActiveLayer.color;
                        RxTypeList.AcDbArc Arc = new RxTypeList.AcDbArc();
                        Arc.StartPoint = ((dynamic)obj).StartPoint;
                        Arc.EndPoint   = ((dynamic)obj).EndPoint;
                        Arc.Center     = ((dynamic)obj).Center;
                        Arc.Radius     = ((dynamic)obj).Radius;
                        Arc.StartAngle = ((dynamic)obj).StartAngle;
                        Arc.StartAngle = (180 / Math.PI) * Arc.StartAngle;
                        Arc.EndAngle   = ((dynamic)obj).EndAngle;
                        Arc.EndAngle   = (180 / Math.PI) * Arc.EndAngle;
                        Arc.Normal     = ((dynamic)obj).Normal;
                        OprateFormData(Arc);
                        break;
                    }

                    case "AcDbPolyline":
                    {
                        //((dynamic)obj).color = caddocument.ActiveLayer.color;
                        RxTypeList.AcDbPolyline Pl = new RxTypeList.AcDbPolyline();
                        Pl.Points = ((dynamic)obj).Coordinates;
                        int NumberLine, NumberPoints;
                        NumberPoints = Pl.Points.Count();        //Total Polyline Point Number
                        NumberLine   = NumberPoints / 2 - 1;     //Total Polyline Number
                        int Cline = 0;
                        for (int i = 0; i < NumberPoints; i++)
                        {
                            RxTypeList.AcadLine Aline = new RxTypeList.AcadLine();
                            try
                            {
                                Aline.StartPoint = new double[3] {
                                    Math.Round(Pl.Points[i], 0), Math.Round(Pl.Points[i + 1], 0), 0
                                };
                                Aline.EndPoint = new double[3] {
                                    Math.Round(Pl.Points[i + 2], 0), Math.Round(Pl.Points[i + 3], 0), 0
                                };
                                if (Aline.StartPoint == Aline.EndPoint)         //始点==末点 执行下个循环
                                {
                                    i += 1;
                                    continue;
                                }
                            }
                            catch (System.Exception)
                            {
                                i += 1;
                                continue;
                            }
                            Aline.CenterPoint    = new double[3];
                            Aline.CenterPoint[0] = Aline.StartPoint[0] + (Aline.EndPoint[0] - Aline.StartPoint[0]) / 2;
                            Aline.CenterPoint[1] = Aline.StartPoint[1] + (Aline.EndPoint[1] - Aline.StartPoint[1]) / 2;
                            Aline.CenterPoint[2] = Aline.StartPoint[2] + (Aline.EndPoint[2] - Aline.StartPoint[2]) / 2;
                            //Aline.FwAngle = Math.Atan(Math.Abs(Aline.EndPoint[1] - Aline.StartPoint[1]) / Math.Abs(Aline.EndPoint[0] - Aline.StartPoint[0]));
                            Aline.FwAngle = Math.Atan((Aline.EndPoint[1] - Aline.StartPoint[1]) / (Aline.EndPoint[0] - Aline.StartPoint[0]));
                            double ASin = Aline.FwAngle;
                            Aline.FwAngle = Math.Round(180 * Aline.FwAngle / Math.PI, 2);
                            if (Aline.EndPoint[1] - Aline.StartPoint[1] == 0)
                            {
                                Aline.Length = Math.Abs(Aline.EndPoint[0] - Aline.StartPoint[0]);
                            }
                            else if (Aline.EndPoint[0] - Aline.StartPoint[0] == 0)
                            {
                                Aline.Length = Math.Abs(Aline.EndPoint[1] - Aline.StartPoint[1]);
                            }
                            else
                            {
                                double dy = Math.Abs(Aline.EndPoint[1] - Aline.StartPoint[1]);
                                Aline.Length = Math.Round(dy / Math.Sin(ASin), 4);
                            }
                            if (Math.Round(Aline.Length, 0) == 0)
                            {
                                i += 1;
                                continue;
                            }
                            Cline += 1;
                            string str = PlantOnline.WriteFence(Aline.Length, Aline.CenterPoint, Aline.FwAngle, RefPoint);
                            if (str != string.Empty)
                            {
                                SendDataToSocket(str);
                            }
                            //if (Cline== NumberLine)
                            //{
                            //    continue;
                            //}
                            i += 1;
                        }
                        break;
                    }

                    default:
                        MessageBox.Show("您选择的不是一条直线无法获取起始点和结束点!");
                        this.WindowState   = FormWindowState.Normal;
                        this.StartPosition = FormStartPosition.CenterScreen;
                        break;
                    }
                    try
                    {
                        ((dynamic)obj).color = caddocument.ActiveLayer.color;
                    }
                    catch (System.Exception)
                    {
                        continue;
                    }
                } while (JS < 99999);
            }
            catch (COMException E)
            {
                if (((dynamic)E).HResult == -2147352567)
                {
                    //Console.Write(((dynamic)e).Button);
                    this.WindowState   = FormWindowState.Normal;
                    this.StartPosition = FormStartPosition.CenterScreen;
                    return;
                }
                else
                {
                    goto Reset;
                }
            }
        }
Beispiel #3
0
        private void ManulInputLine_Click(object sender, EventArgs e)
        {
Reset:
            AcadDocument caddocument = null;

            try
            {
                this.WindowState = FormWindowState.Minimized;
                tAcadApplication = (AcadApplication)Marshal.GetActiveObject("AutoCAD.Application");
                caddocument      = tAcadApplication.ActiveDocument;
            }
            catch (COMException)
            {
                //throw;
            }
            object obj, pickedObj = null;

            try
            {
                int JS = 0;
                do
                {
                    JS += 1;
                    try
                    {
                        caddocument.Utility.GetEntity(out obj, out pickedObj, "请选择一个直线或圆弧,取消点击空白区域、右击、ESC命令即可:");
                    }
                    catch (COMException E)
                    {
                        if (((dynamic)E).HResult == -2147352567)
                        {
                            //Console.Write(((dynamic)e).Button);
                            this.WindowState = FormWindowState.Maximized;
                            break;
                        }
                        continue;
                    }
                    var     db         = caddocument.Database;
                    dynamic NlineTaype = ((dynamic)obj).EntityName;
                    string  NlineT     = Convert.ToString(NlineTaype);
                    AcadObj = obj;
                    switch (NlineT)
                    {
                    case "AcDbLine":
                    {
                        ((dynamic)obj).color = caddocument.ActiveLayer.color;
                        RxTypeList.AcadLine RT = new RxTypeList.AcadLine();
                        RT.StartPoint = ((dynamic)obj).StartPoint;
                        RT.EndPoint   = ((dynamic)obj).EndPoint;
                        RT.FwAngle    = ((dynamic)obj).Angle;
                        double Tangle = (180 / Math.PI) * RT.FwAngle;
                        RT.FwAngle = Math.Round(Tangle, 1);
                        OprateFormData(RT);
                        break;
                    }

                    case "AcDbArc":
                    {
                        ((dynamic)obj).color = caddocument.ActiveLayer.color;
                        RxTypeList.AcDbArc Arc = new RxTypeList.AcDbArc();
                        Arc.StartPoint = ((dynamic)obj).StartPoint;
                        Arc.EndPoint   = ((dynamic)obj).EndPoint;
                        Arc.Center     = ((dynamic)obj).Center;
                        Arc.Radius     = ((dynamic)obj).Radius;
                        Arc.StartAngle = ((dynamic)obj).StartAngle;
                        Arc.StartAngle = (180 / Math.PI) * Arc.StartAngle;
                        Arc.EndAngle   = ((dynamic)obj).EndAngle;
                        Arc.EndAngle   = (180 / Math.PI) * Arc.EndAngle;
                        Arc.Normal     = ((dynamic)obj).Normal;
                        OprateFormData(Arc);
                        break;
                    }

                    default:
                        MessageBox.Show("您选择的不是一条直线无法获取起始点和结束点!");
                        this.WindowState = FormWindowState.Maximized;
                        break;
                    }
                } while (JS < 99999);
            }
            catch (COMException E)
            {
                if (((dynamic)E).HResult == -2147352567)
                {
                    //Console.Write(((dynamic)e).Button);
                    this.WindowState = FormWindowState.Maximized;
                    return;
                }
                else
                {
                    goto Reset;
                }
            }
        }