/// <summary>
/// Modifies a contribution using a transform, position, and weight.
/// </summary>
/// <param name="transform">Transform to use to modify the contribution.</param>
/// <param name="center">Center to use to modify the contribution.</param>
/// <param name="baseContribution">Original unmodified contribution.</param>
/// <param name="weight">Weight of the contribution.</param>
/// <param name="contribution">Transformed contribution.</param>
public static void TransformContribution(ref RigidTransform transform, ref Vector3 center, ref Matrix3x3 baseContribution, float weight, out Matrix3x3 contribution)
{
Matrix3x3 rotation;
Matrix3x3.CreateFromQuaternion(ref transform.Orientation, out rotation);
Matrix3x3 temp;
//Do angular transformed contribution first...
Matrix3x3.MultiplyTransposed(ref rotation, ref baseContribution, out temp);
Matrix3x3.Multiply(ref temp, ref rotation, out temp);
contribution = temp;
//Now add in the offset from the origin.
Vector3 offset;
Vector3.Subtract(ref transform.Position, ref center, out offset);
Matrix3x3 innerProduct;
Matrix3x3.CreateScale(offset.LengthSquared(), out innerProduct);
Matrix3x3 outerProduct;
Matrix3x3.CreateOuterProduct(ref offset, ref offset, out outerProduct);
Matrix3x3.Subtract(ref innerProduct, ref outerProduct, out temp);
Matrix3x3.Add(ref contribution, ref temp, out contribution);
Matrix3x3.Multiply(ref contribution, weight, out contribution);
}
/// <summary>
/// Calculates necessary information for velocity solving.
/// Called by preStep(float dt)
/// </summary>
/// <param name="dt">Time in seconds since the last update.</param>
public override void Update(float dt)
{
Matrix3x3.Transform(ref localAnchorA, ref connectionA.orientationMatrix, out worldOffsetA);
Matrix3x3.Transform(ref localAnchorB, ref connectionB.orientationMatrix, out worldOffsetB);
float errorReductionParameter;
springSettings.ComputeErrorReductionAndSoftness(dt, 1 / dt, out errorReductionParameter, out softness);
//Mass Matrix
Matrix3x3 k;
Matrix3x3 linearComponent;
Matrix3x3.CreateCrossProduct(ref worldOffsetA, out rACrossProduct);
Matrix3x3.CreateCrossProduct(ref worldOffsetB, out rBCrossProduct);
if (connectionA.isDynamic && connectionB.isDynamic)
{
Matrix3x3.CreateScale(connectionA.inverseMass + connectionB.inverseMass, out linearComponent);
Matrix3x3 angularComponentA, angularComponentB;
Matrix3x3.Multiply(ref rACrossProduct, ref connectionA.inertiaTensorInverse, out angularComponentA);
Matrix3x3.Multiply(ref rBCrossProduct, ref connectionB.inertiaTensorInverse, out angularComponentB);
Matrix3x3.Multiply(ref angularComponentA, ref rACrossProduct, out angularComponentA);
Matrix3x3.Multiply(ref angularComponentB, ref rBCrossProduct, out angularComponentB);
Matrix3x3.Subtract(ref linearComponent, ref angularComponentA, out k);
Matrix3x3.Subtract(ref k, ref angularComponentB, out k);
}
else if (connectionA.isDynamic && !connectionB.isDynamic)
{
Matrix3x3.CreateScale(connectionA.inverseMass, out linearComponent);
Matrix3x3 angularComponentA;
Matrix3x3.Multiply(ref rACrossProduct, ref connectionA.inertiaTensorInverse, out angularComponentA);
Matrix3x3.Multiply(ref angularComponentA, ref rACrossProduct, out angularComponentA);
Matrix3x3.Subtract(ref linearComponent, ref angularComponentA, out k);
}
else if (!connectionA.isDynamic && connectionB.isDynamic)
{
Matrix3x3.CreateScale(connectionB.inverseMass, out linearComponent);
Matrix3x3 angularComponentB;
Matrix3x3.Multiply(ref rBCrossProduct, ref connectionB.inertiaTensorInverse, out angularComponentB);
Matrix3x3.Multiply(ref angularComponentB, ref rBCrossProduct, out angularComponentB);
Matrix3x3.Subtract(ref linearComponent, ref angularComponentB, out k);
}
else
{
throw new InvalidOperationException("Cannot constrain two kinematic bodies.");
}
k.M11 += softness;
k.M22 += softness;
k.M33 += softness;
Matrix3x3.Invert(ref k, out massMatrix);
Vector3.Add(ref connectionB.position, ref worldOffsetB, out error);
Vector3.Subtract(ref error, ref connectionA.position, out error);
Vector3.Subtract(ref error, ref worldOffsetA, out error);
Vector3.Multiply(ref error, -errorReductionParameter, out biasVelocity);
//Ensure that the corrective velocity doesn't exceed the max.
float length = biasVelocity.LengthSquared();
if (length > maxCorrectiveVelocitySquared)
{
float multiplier = maxCorrectiveVelocity / (float)Math.Sqrt(length);
biasVelocity.X *= multiplier;
biasVelocity.Y *= multiplier;
biasVelocity.Z *= multiplier;
}
}
/// <summary>
/// Computes the center, volume, and volume distribution of a shape represented by a mesh.
/// </summary>
/// <param name="vertices">Vertices of the mesh.</param>
/// <param name="triangleIndices">Groups of 3 indices into the vertices array which represent the triangles of the mesh.</param>
/// <param name="center">Computed center of the shape's volume.</param>
/// <param name="volume">Volume of the shape.</param>
/// <param name="volumeDistribution">Distribution of the volume as measured from the computed center.</param>
public static void ComputeShapeDistribution(IList <Vector3> vertices, IList <int> triangleIndices, out Vector3 center, out float volume, out Matrix3x3 volumeDistribution)
{
//Explanation for the tetrahedral integration bits: Explicit Exact Formulas for the 3-D Tetrahedron Inertia Tensor in Terms of its Vertex Coordinates
//http://www.scipub.org/fulltext/jms2/jms2118-11.pdf
//x1, x2, x3, x4 are origin, triangle1, triangle2, triangle3
//Looking to find inertia tensor matrix of the form
// [ a -b' -c' ]
// [ -b' b -a' ]
// [ -c' -a' c ]
float a = 0, b = 0, c = 0, ao = 0, bo = 0, co = 0;
Vector3 summedCenter = new Vector3();
float scaledVolume = 0;
for (int i = 0; i < triangleIndices.Count; i += 3)
{
Vector3 v2 = vertices[triangleIndices[i]];
Vector3 v3 = vertices[triangleIndices[i + 1]];
Vector3 v4 = vertices[triangleIndices[i + 2]];
//Determinant is 6 * volume. It's signed, though; the mesh isn't necessarily convex and the origin isn't necessarily in the mesh even if it is convex.
float scaledTetrahedronVolume = v2.X * (v3.Z * v4.Y - v3.Y * v4.Z) -
v3.X * (v2.Z * v4.Y - v2.Y * v4.Z) +
v4.X * (v2.Z * v3.Y - v2.Y * v3.Z);
scaledVolume += scaledTetrahedronVolume;
Vector3 tetrahedronCentroid;
Vector3.Add(ref v2, ref v3, out tetrahedronCentroid);
Vector3.Add(ref tetrahedronCentroid, ref v4, out tetrahedronCentroid);
Vector3.Multiply(ref tetrahedronCentroid, scaledTetrahedronVolume, out tetrahedronCentroid);
Vector3.Add(ref tetrahedronCentroid, ref summedCenter, out summedCenter);
a += scaledTetrahedronVolume * (v2.Y * v2.Y + v2.Y * v3.Y + v3.Y * v3.Y + v2.Y * v4.Y + v3.Y * v4.Y + v4.Y * v4.Y +
v2.Z * v2.Z + v2.Z * v3.Z + v3.Z * v3.Z + v2.Z * v4.Z + v3.Z * v4.Z + v4.Z * v4.Z);
b += scaledTetrahedronVolume * (v2.X * v2.X + v2.X * v3.X + v3.X * v3.X + v2.X * v4.X + v3.X * v4.X + v4.X * v4.X +
v2.Z * v2.Z + v2.Z * v3.Z + v3.Z * v3.Z + v2.Z * v4.Z + v3.Z * v4.Z + v4.Z * v4.Z);
c += scaledTetrahedronVolume * (v2.X * v2.X + v2.X * v3.X + v3.X * v3.X + v2.X * v4.X + v3.X * v4.X + v4.X * v4.X +
v2.Y * v2.Y + v2.Y * v3.Y + v3.Y * v3.Y + v2.Y * v4.Y + v3.Y * v4.Y + v4.Y * v4.Y);
ao += scaledTetrahedronVolume * (2 * v2.Y * v2.Z + v3.Y * v2.Z + v4.Y * v2.Z + v2.Y * v3.Z + 2 * v3.Y * v3.Z + v4.Y * v3.Z + v2.Y * v4.Z + v3.Y * v4.Z + 2 * v4.Y * v4.Z);
bo += scaledTetrahedronVolume * (2 * v2.X * v2.Z + v3.X * v2.Z + v4.X * v2.Z + v2.X * v3.Z + 2 * v3.X * v3.Z + v4.X * v3.Z + v2.X * v4.Z + v3.X * v4.Z + 2 * v4.X * v4.Z);
co += scaledTetrahedronVolume * (2 * v2.X * v2.Y + v3.X * v2.Y + v4.X * v2.Y + v2.X * v3.Y + 2 * v3.X * v3.Y + v4.X * v3.Y + v2.X * v4.Y + v3.X * v4.Y + 2 * v4.X * v4.Y);
}
if (scaledVolume < Toolbox.Epsilon)
{
//This function works on the assumption that there is volume.
//If there is no volume, then volume * density is 0, so the mass is considered to be zero.
//If the mass is zero, then a zero matrix is the consistent result.
//In other words, this function shouldn't be used with things with no volume.
//A special case should be used instead.
volumeDistribution = new Matrix3x3();
volume = 0;
center = new Vector3();
}
else
{
Vector3.Multiply(ref summedCenter, 0.25f / scaledVolume, out center);
volume = scaledVolume / 6;
float scaledDensity = 1 / volume;
float diagonalFactor = scaledDensity / 60;
float offFactor = -scaledDensity / 120;
a *= diagonalFactor;
b *= diagonalFactor;
c *= diagonalFactor;
ao *= offFactor;
bo *= offFactor;
co *= offFactor;
//volumeDistribution = new Matrix3x3(a, bo, co,
// bo, b, ao,
// co, ao, c);
volumeDistribution = new Matrix3x3(a, co, bo,
co, b, ao,
bo, ao, c);
//The volume distribution, as computed, is currently offset from the origin.
//There's a operation that moves a local inertia tensor to a displaced position.
//The inverse of that operation can be computed and applied to the displaced inertia to center it on the origin.
Matrix3x3 additionalInertia;
GetPointContribution(1, ref Toolbox.ZeroVector, ref center, out additionalInertia);
Matrix3x3.Subtract(ref volumeDistribution, ref additionalInertia, out volumeDistribution);
//The derivation that shows the above point mass usage is valid goes something like this, with lots of details left out:
//Consider the usual form of the tensor, created from the summation of a bunch of pointmasses representing the shape.
//Each sum contribution relies on a particular offset, r. When the center of mass isn't aligned with (0,0,0),
//r = c + b, where c is the center of mass and b is the offset of r from the center of mass.
//So, each term of the matrix (like M11 = sum(mi * (ry*ry + rz*rz))) can be rephrased in terms of the center and the offset:
//M11 = sum(mi * ((cy + by) * (cy + by) + (cz + bz) * (cz + bz)))
//Expanding that gets you to:
//M11 = sum(mi * (cycy + 2cyby + byby + czcz + 2czbz + bzbz))
//A couple of observations move things along.
//1) Since it's constant over the summation, the c terms can be pulled out of a sum.
//2) sum(mi * by) and sum(mi * bz) are zero, because 'by' and 'bz' are offsets from the center of mass. In other words, if you averaged all of the offsets, it would equal (0,0,0).
//(uniform density assumed)
//With a little more massaging, the constant c terms can be fully separated into an additive term on each matrix element.
}
}
///<summary>
/// Performs the frame's configuration step.
///</summary>
///<param name="dt">Timestep duration.</param>
public override void Update(float dt)
{
//Transform point into world space.
Matrix3x3.Transform(ref localPoint, ref entity.orientationMatrix, out r);
Vector3.Add(ref r, ref entity.position, out worldPoint);
float updateRate = 1 / dt;
if (settings.mode == MotorMode.Servomechanism)
{
Vector3.Subtract(ref settings.servo.goal, ref worldPoint, out error);
float separationDistance = error.Length();
if (separationDistance > Toolbox.BigEpsilon)
{
float errorReduction;
settings.servo.springSettings.ComputeErrorReductionAndSoftness(dt, updateRate, out errorReduction, out usedSoftness);
//The rate of correction can be based on a constant correction velocity as well as a 'spring like' correction velocity.
//The constant correction velocity could overshoot the destination, so clamp it.
float correctionSpeed = MathHelper.Min(settings.servo.baseCorrectiveSpeed, separationDistance * updateRate) +
separationDistance * errorReduction;
Vector3.Multiply(ref error, correctionSpeed / separationDistance, out biasVelocity);
//Ensure that the corrective velocity doesn't exceed the max.
float length = biasVelocity.LengthSquared();
if (length > settings.servo.maxCorrectiveVelocitySquared)
{
float multiplier = settings.servo.maxCorrectiveVelocity / (float)Math.Sqrt(length);
biasVelocity.X *= multiplier;
biasVelocity.Y *= multiplier;
biasVelocity.Z *= multiplier;
}
}
else
{
//Wouldn't want to use a bias from an earlier frame.
biasVelocity = new Vector3();
}
}
else
{
usedSoftness = settings.velocityMotor.softness * updateRate;
biasVelocity = settings.velocityMotor.goalVelocity;
error = Vector3.Zero;
}
//Compute the maximum force that can be applied this frame.
ComputeMaxForces(settings.maximumForce, dt);
//COMPUTE EFFECTIVE MASS MATRIX
//Transforms a change in velocity to a change in momentum when multiplied.
Matrix3x3 linearComponent;
Matrix3x3.CreateScale(entity.inverseMass, out linearComponent);
Matrix3x3 rACrossProduct;
Matrix3x3.CreateCrossProduct(ref r, out rACrossProduct);
Matrix3x3 angularComponentA;
Matrix3x3.Multiply(ref rACrossProduct, ref entity.inertiaTensorInverse, out angularComponentA);
Matrix3x3.Multiply(ref angularComponentA, ref rACrossProduct, out angularComponentA);
Matrix3x3.Subtract(ref linearComponent, ref angularComponentA, out effectiveMassMatrix);
effectiveMassMatrix.M11 += usedSoftness;
effectiveMassMatrix.M22 += usedSoftness;
effectiveMassMatrix.M33 += usedSoftness;
Matrix3x3.Invert(ref effectiveMassMatrix, out effectiveMassMatrix);
}
/// <summary>
/// Recenters the triangle data and computes the volume distribution.
/// </summary>
/// <param name="data">Mesh data to analyze.</param>
/// <returns>Computed center, volume, and volume distribution.</returns>
private ShapeDistributionInformation ComputeVolumeDistribution(TransformableMeshData data)
{
//Compute the surface vertices of the shape.
ShapeDistributionInformation shapeInformation;
if (solidity == MobileMeshSolidity.Solid)
{
//The following inertia tensor calculation assumes a closed mesh.
var transformedVertices = CommonResources.GetVectorList();
if (transformedVertices.Capacity < data.vertices.Length)
{
transformedVertices.Capacity = data.vertices.Length;
}
transformedVertices.Count = data.vertices.Length;
for (int i = 0; i < data.vertices.Length; ++i)
{
data.GetVertexPosition(i, out transformedVertices.Elements[i]);
}
InertiaHelper.ComputeShapeDistribution(transformedVertices, data.indices, out shapeInformation.Center, out shapeInformation.Volume, out shapeInformation.VolumeDistribution);
CommonResources.GiveBack(transformedVertices);
if (shapeInformation.Volume > 0)
{
return(shapeInformation);
}
throw new ArgumentException("A solid mesh must have volume.");
}
shapeInformation.Center = new Vector3();
shapeInformation.VolumeDistribution = new Matrix3x3();
float totalWeight = 0;
for (int i = 0; i < data.indices.Length; i += 3)
{
//Compute the center contribution.
Vector3 vA, vB, vC;
data.GetTriangle(i, out vA, out vB, out vC);
Vector3 vAvB;
Vector3 vAvC;
Vector3.Subtract(ref vB, ref vA, out vAvB);
Vector3.Subtract(ref vC, ref vA, out vAvC);
Vector3 cross;
Vector3.Cross(ref vAvB, ref vAvC, out cross);
float weight = cross.Length();
totalWeight += weight;
float perVertexWeight = weight * (1f / 3f);
shapeInformation.Center += perVertexWeight * (vA + vB + vC);
//Compute the inertia contribution of this triangle.
//Approximate it using pointmasses positioned at the triangle vertices.
//(There exists a direct solution, but this approximation will do plenty fine.)
Matrix3x3 aContribution, bContribution, cContribution;
InertiaHelper.GetPointContribution(perVertexWeight, ref Toolbox.ZeroVector, ref vA, out aContribution);
InertiaHelper.GetPointContribution(perVertexWeight, ref Toolbox.ZeroVector, ref vB, out bContribution);
InertiaHelper.GetPointContribution(perVertexWeight, ref Toolbox.ZeroVector, ref vC, out cContribution);
Matrix3x3.Add(ref aContribution, ref shapeInformation.VolumeDistribution, out shapeInformation.VolumeDistribution);
Matrix3x3.Add(ref bContribution, ref shapeInformation.VolumeDistribution, out shapeInformation.VolumeDistribution);
Matrix3x3.Add(ref cContribution, ref shapeInformation.VolumeDistribution, out shapeInformation.VolumeDistribution);
}
shapeInformation.Center /= totalWeight;
//The extra factor of 2 is used because the cross product length was twice the actual area.
Matrix3x3.Multiply(ref shapeInformation.VolumeDistribution, 1 / (2 * totalWeight), out shapeInformation.VolumeDistribution);
//Move the inertia tensor into position according to the center.
Matrix3x3 additionalInertia;
InertiaHelper.GetPointContribution(0.5f, ref Toolbox.ZeroVector, ref shapeInformation.Center, out additionalInertia);
Matrix3x3.Subtract(ref shapeInformation.VolumeDistribution, ref additionalInertia, out shapeInformation.VolumeDistribution);
shapeInformation.Volume = 0;
return(shapeInformation);
}