/// <summary>
/// 清空控制字
/// </summary>
/// <param name="lineName"></param>
/// <param name="station"></param>
/// <param name="step"></param>
public static void ClearControl(string lineName, string station, int step)
{
#region 变量
Recipe_Bll.WriteCacheStationInfo(station, "Step", step.ToString());
var lineObj = XML_Tool.xml.LINE.Single(n => n.Name == lineName);
var stationObj = lineObj.STATION.Single(n => n.Name == station);
Crafts_Recipe_Modle crafts_Recipe_Modle = GetSingleRecipe(station, step);
#endregion
#region 配方为空
if (crafts_Recipe_Modle == null)
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step：" + step + " ,Formula not found！", 1, true);
return;
}
#endregion
#region 拧紧
if (crafts_Recipe_Modle.OperationType == "拧紧" || crafts_Recipe_Modle.OperationType == "Tighten")
{
var opcObj = stationObj.Opcitem.Single(n => n.Name == "拧紧记录");
string backAddr = opcObj.BackAddr;
var dataitemObj = opcObj.Tag.Single(n => n.Name == "拧紧下发").Dataitem;
foreach (var data in dataitemObj)
{
string sn = Recipe_Bll.GetCacheStationInfo(station, "SN");
if (data.ColmnName == "SN")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, "", data.AddrType, int.Parse(data.AddrLength)))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,SN：" + data.Addr + " , Write value ：null"
+ " ，Successfully written！", 0, false);
}
}
if (data.ColmnName == "BlotNumber")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, "0", data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,BlotNumber：" + data.Addr + " , Write value ：0"
+ " ，Successfully written！", 0, false);
}
}
if (data.ColmnName == "SleeveNo")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, "0", data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,SleeveNo：" + data.Addr + " , Write value ：0"
+ " ，Successfully written！", 0, false);
}
}
if (data.ColmnName == "ProgramNo")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, "0", data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,ProgramNo：" + data.Addr + " , Write value ：0"
+ " ，Successfully written！", 0, false);
}
}
}
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], backAddr, "0", opcObj.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send tightening address：" + backAddr + " , Write value ："
+ " 0，Successfully written！", 0, false);
}
else
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send tightening address：" + backAddr + " , Write value ："
+ " 0，Write failure！", 0, false);
}
}
#endregion
#region 测量
if (crafts_Recipe_Modle.OperationType == "测量" || crafts_Recipe_Modle.OperationType == "Measuring")
{
var opcObj = stationObj.Opcitem.Single(n => n.Name.Contains("测量记录") && GetTestType(crafts_Recipe_Modle.ComponentName).Contains(n.OperationDesc));
string backAddr = opcObj.BackAddr;
var dataitemObj = opcObj.Tag.Single(n => n.Name == "测量下发").Dataitem;
if (dataitemObj.Count == 0)//无需下发程序号
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], backAddr, "0", opcObj.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 0，Successfully written！", 0, true);
}
else
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 0，Write failure！", 0, true);
}
}
else
{
foreach (var data in dataitemObj)
{
if (data.Name == "ProgramNo")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, crafts_Recipe_Modle.ProgramNo.ToString(), data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ crafts_Recipe_Modle.ProgramNo.ToString() + " ，Successfully written！", 0, true);
}
}
}
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], backAddr, "0", opcObj.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 0，Successfully written！", 0, true);
}
else
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 0，Write failure！", 0, true);
}
}
}
#endregion
}
/// <summary>
/// deal with siemens plc event
/// </summary>
/// <param name="state"></param>
public void DealABPLCEvent(object state)
{
try
{
var para = (ABPLCParameter)state;
var MA = para.ma;
var itemValue = para.itemValue;
var type = MA.Parameter["type"];
var LineName = MA.Parameter["line"];
var STName = MA.Parameter["station"];
var OPCName = MA.Parameter["name"];
var BackAddr = MA.Parameter["backaddr"];
var lineObj = XML_Tool.xml.LINE.Single(n => n.Name == LineName);
var stationObj = XML_Tool.xml.StationConfig.Single(n => n.Name == STName);
#region 总成绑定
if (type == "DataRecord" && OPCName == "总成绑定" && itemValue == "1")
{
try
{
#region 读取plc地址里的值
timeAddFlag = true;
int stepNo = 1;
string sn = string.Empty;
Stopwatch sw = new Stopwatch();
var stObj = lineObj.STATION.Single(n => n.Name == STName);
var opcitem = stObj.Opcitem.SingleOrDefault(n => n.Name == OPCName);
var tag = opcitem.Tag.SingleOrDefault(n => n.Tag == int.Parse(itemValue));
if (tag == null)
{
return;
}
recodePLCStationMessage(LineName + STName, " Start assembly binding", 0, true);
var dataList = tag.Dataitem;
sw.Start();
string dbColumnStr = string.Empty, dbValueStr = string.Empty, logInfo = string.Empty;
foreach (var item in dataList)
{
dbColumnStr += "[" + item.ColmnName + "]" + ",";
dbValueStr += ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + "','";
logInfo += item.ColmnName + " : " + ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + " , ";
if (item.ColmnName == "SN")
{
sn = ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)).ToString();
}
}
sw.Stop();
sw.Reset();
#endregion
#region 总成号为空，报警
if (string.IsNullOrEmpty(sn))
{
recodePLCStationMessage(LineName + STName, " The assembly number is empty and the verification fails.！", 0, true);
ABWrite(abPlc[lineObj.Index], BackAddr, "2", "int", 0);//fail
return;
}
#endregion
#region 获取配方，数据写入缓存
DataTable productionDt = crafts_Production_Bll.Select_All_Production_Table();
bool loadFlag = false;
for (int i = 0; i < productionDt.Rows.Count; i++)
{
if (sn.Contains(productionDt.Rows[i]["ProductionRule"].ToString()))
{
loadFlag = Recipe_Bll.LoadRecipes(productionDt.Rows[i]["ProductionName"].ToString(), STName);
}
}
if (!loadFlag)
{
recodePLCStationMessage(LineName + STName, "SN：" + sn + " , Can't recruit the product corresponding to the assembly, please check the formula！", 0, true);
ABWrite(abPlc[lineObj.Index], BackAddr, "12", opcitem.AddrType, 0);//fail
return;
}
Recipe_Bll.WriteCacheStationInfo(STName, "Step", "1");
Recipe_Bll.WriteCacheStationInfo(STName, "SN", sn);
#endregion
#region 处理数据
if (stationObj.Index != 1)
{
int proIndex = XML_Tool.xml.StationConfig.Single(n => n.Name == STName).Index - 1;
string stationStatus = trace_StationStatus_Bll.Select_State__CurStationInfo_Table(XML_Tool.xml.StationConfig.Single(n => n.Index == proIndex).Name, sn);
if (stationStatus == "1")
{
recodePLCStationMessage(LineName + STName, "SN：" + sn + " , Verification pass！", 0, true);
ABWrite(abPlc[lineObj.Index], BackAddr, "11", opcitem.AddrType, 0);//success
Recipe_Bll.Business(LineName, STName, stepNo + 1);
}
else
{
recodePLCStationMessage(LineName + STName, "SN：" + sn + " , Verification failed！", 0, true);
ABWrite(abPlc[lineObj.Index], BackAddr, "12", opcitem.AddrType, 0);//fail
#region 清空缓存
Recipe_Bll.ResetCacheStationInfo(STName);
Recipe_Bll.ResetCacheStationRecipeInfo(STName);
#endregion
}
}
else
{
recodePLCStationMessage(LineName + STName, "SN：" + sn + " , First station verification passed！", 0, true);
ABWrite(abPlc[lineObj.Index], BackAddr, "11", opcitem.AddrType, 0);//success
Recipe_Bll.Business(LineName, STName, stepNo + 1);
}
#endregion
}
catch (Exception ex)
{
recodePLCStationMessage(LineName + STName, " There is a problem with the assembly binding, exception information：" + ex.Message, 1, true);
}
}
#endregion
#region 物料追溯
if (type == "DataRecord" && OPCName == "物料记录" && itemValue == "1")
{
try
{
int stepNo = Convert.ToInt32(Recipe_Bll.GetCacheStationInfo(STName, "Step"));
string sn = Recipe_Bll.GetCacheStationInfo(STName, "SN");
Crafts_Recipe_Modle crafts_Recipe_Modle = Recipe_Bll.GetSingleRecipe(STName, stepNo);
#region 读取plc地址里的值
Stopwatch sw = new Stopwatch();
var stObj = lineObj.STATION.Single(n => n.Name == STName);
var opcitem = stObj.Opcitem.SingleOrDefault(n => n.Name == OPCName);
var tag = opcitem.Tag.SingleOrDefault(n => n.Tag == int.Parse(itemValue));
if (tag == null)
{
return;
}
recodePLCStationMessage(LineName + STName, " SN：" + sn + ",Start material data record", 0, true);
var dataList = tag.Dataitem;
sw.Start();
string dbColumnStr = string.Empty, dbValueStr = string.Empty, logInfo = string.Empty, barCode = string.Empty;
foreach (var item in dataList)
{
dbColumnStr += "[" + item.ColmnName + "]" + ",";
dbValueStr += ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + "','";
logInfo += item.ColmnName + " : " + ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + " , ";
if (item.ColmnName == "SN")
{
barCode = ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)).ToString();
}
}
sw.Stop();
sw.Reset();
#endregion
#region 校验扫描条码是否正确
if (crafts_Recipe_Modle.IsCheck == 1)
{
if (!barCode.Contains(crafts_Recipe_Modle.CheckRule))
{
recodePLCStationMessage(LineName + STName, " SN：" + sn + " , Material barcode：" + barCode + " , Verification rule：" + crafts_Recipe_Modle.CheckRule + " ，Verification failed！", 0, true);
ABWrite(abPlc[lineObj.Index], BackAddr, "2", "int", 0);//fail
return;
}
}
#endregion
#region 追溯数据处理
if (crafts_Recipe_Modle.Istrace == 1)
{
string count = trace_Keypart_Bll.Select_Count__Material_Table(STName, sn, barCode);
if (count != "0")
{
trace_Keypart_Bll.Delete_Con_Material_Table(STName, sn, barCode);
recodePLCStationMessage(LineName + STName, " Data：" + logInfo + " existed，" + "Incomplete data cleared！", 0, true);
}
trace_Keypart_Modle.ComponentName = crafts_Recipe_Modle.ComponentName;
trace_Keypart_Modle.ComponentBarcode = barCode;
trace_Keypart_Modle.RecordTime = DateTime.Now.ToString();
trace_Keypart_Modle.SN = sn;
trace_Keypart_Modle.Station = STName;
if (trace_Keypart_Bll.Insert_Condition_Material_Table(trace_Keypart_Modle) > 0)
{
ABWrite(abPlc[lineObj.Index], BackAddr, "1", "int", 0);//success
}
else
{
ABWrite(abPlc[lineObj.Index], BackAddr, "2", "int", 0);//fail
}
recodePLCStationMessage(LineName + STName, logInfo + " Material data record completed！", 0, true);
Recipe_Bll.Business(LineName, STName, stepNo + 1);
}
else
{
recodePLCStationMessage(LineName + STName, logInfo + " ，No traceback required！", 0, true);
ABWrite(abPlc[lineObj.Index], BackAddr, "1", "int", 0);//success
Recipe_Bll.Business(LineName, STName, stepNo + 1);
}
#endregion
}
catch (Exception ex)
{
recodePLCStationMessage(LineName + STName, " Material traceability problems, abnormal information：" + ex.Message, 1, true);
}
}
#endregion
#region 拧紧追溯
if (type == "DataRecord" && OPCName == "拧紧记录" && itemValue == "1" || itemValue == "5" || itemValue == "22")
{
try
{
var stObj = lineObj.STATION.Single(n => n.Name == STName);
var opcitem = stObj.Opcitem.SingleOrDefault(n => n.Name == OPCName);
#region 重新给使能
if (itemValue == "5")
{
ABWrite(abPlc[lineObj.Index], BackAddr, "21", opcitem.AddrType, 0);
return;
}
if (itemValue == "0")
{
return;
}
#endregion
string st = Recipe_Bll.GetCacheStationInfo(STName, "Step");
if (string.IsNullOrEmpty(st))
{
return;
}
int stepNo = Convert.ToInt32(Recipe_Bll.GetCacheStationInfo(STName, "Step"));
string sn = Recipe_Bll.GetCacheStationInfo(STName, "SN");
Crafts_Recipe_Modle crafts_Recipe_Modle = Recipe_Bll.GetSingleRecipe(STName, stepNo);
#region 进入下一步
if (itemValue == "22")
{
Recipe_Bll.Business(LineName, STName, stepNo + 1);
return;
}
#endregion
#region 无需追溯，直接通过
if (crafts_Recipe_Modle.Istrace == 0)
{
if (boltCurNumber < crafts_Recipe_Modle.BlotNumber)
{
recodePLCStationMessage(LineName + STName, "SN：" + sn + ",Formula number " + stepNo + " ，" + boltCurNumber + "No bolts are traced！", 0, true);
return;
}
else
{
boltCurNumber = 0;
recodePLCStationMessage(LineName + STName, "SN：" + sn + ",Formula number " + stepNo + " ，" + boltCurNumber + "No bolts are traced！进入下一步", 0, true);
Recipe_Bll.Business(LineName, STName, stepNo + 1);
return;
}
}
#endregion
#region 读取plc地址里的值
Stopwatch sw = new Stopwatch();
var tag = opcitem.Tag.SingleOrDefault(n => n.Tag == int.Parse(itemValue));
if (tag == null)
{
return;
}
recodePLCStationMessage(LineName + STName, "SN：" + sn + ",Start tightening the data record", 0, true);
var dataList = tag.Dataitem;
sw.Start();
string dbColumnStr = string.Empty, dbValueStr = string.Empty, logInfo = string.Empty;
string result = string.Empty, torgue = string.Empty, angle = string.Empty;
foreach (var item in dataList)
{
dbColumnStr += "[" + item.ColmnName + "]" + ",";
dbValueStr += ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + "','";
logInfo += item.ColmnName + " : " + ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + " , ";
if (item.ColmnName == "Result")
{
result = ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)).ToString();
}
if (item.ColmnName == "BoltValue")
{
torgue = ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)).ToString();
}
if (item.ColmnName == "BoltAngle")
{
angle = ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)).ToString();
}
}
dbColumnStr = dbColumnStr + "[BoltName]" + "," + "[BoltNo]" + "," + "[SN]" + ",";
dbValueStr = dbValueStr + crafts_Recipe_Modle.ComponentName + "','" + boltCurNumber + "','" + sn + "','";
sw.Stop();
sw.Reset();
#endregion
#region 处理追溯数据
if (result != "2")
{
boltCurNumber++;//螺栓数量自加1
string count = trace_Bolt_Bll.Select_Count__Bolt_Table(STName, sn, boltCurNumber);
if (count != "0")
{
trace_Bolt_Bll.Delete_Con_Bolt_Table(STName, sn, boltCurNumber);
recodePLCStationMessage(LineName + STName, "Data：" + logInfo + "Already exists, incomplete data has been cleared！", 0, true);
}
}
if (trace_Bolt_Bll.Insert_Condition_Bolt_Table(tag.TableName, dbColumnStr, dbValueStr, STName) > 0)
{
ABWrite(abPlc[lineObj.Index], BackAddr, "11", opcitem.AddrType, 0);//success
recodePLCStationMessage(LineName + STName, " Tighten back success！", 0, true);
}
else
{
ABWrite(abPlc[lineObj.Index], BackAddr, "12", opcitem.AddrType, 0);//fail
}
recodePLCStationMessage(LineName + STName, logInfo + " Tighten the data record to complete！", 0, true);
//最后一颗螺栓进入下一步
if (boltCurNumber - 1 == crafts_Recipe_Modle.BlotNumber)
{
boltCurNumber = 0;
recodePLCStationMessage(LineName + STName, "SN：" + sn + ",Formula number " + stepNo + " ，" + boltCurNumber + " bolt are traced back!", 0, true);
Recipe_Bll.Business(LineName, STName, stepNo + 1);
}
#endregion
}
catch (Exception ex)
{
recodePLCStationMessage(LineName + STName, "Tighten back to the problem, abnormal information：" + ex.Message, 1, true);
}
}
#endregion
#region 测量追溯
if (type == "DataRecord" && OPCName.Contains("测量记录") && itemValue == "1")
{
try
{
#region 局部变量
string st = Recipe_Bll.GetCacheStationInfo(STName, "Step");
if (string.IsNullOrEmpty(st))
{
return;
}
int stepNo = Convert.ToInt32(Recipe_Bll.GetCacheStationInfo(STName, "Step"));
string sn = Recipe_Bll.GetCacheStationInfo(STName, "SN");
Crafts_Recipe_Modle crafts_Recipe_Modle = Recipe_Bll.GetSingleRecipe(STName, stepNo);
#endregion
#region 无需追溯，直接通过
if (crafts_Recipe_Modle.Istrace == 0)
{
recodePLCStationMessage(LineName + STName, "SN：" + sn + ",Step:" + stepNo + ",Formula number " + stepNo + " ，" + boltCurNumber + " No bolts are traced back!", 0, false);
Recipe_Bll.Business(LineName, STName, stepNo + 1);
return;
}
#endregion
#region 读取plc地址里的值
Thread.Sleep(3000);
string testName = Recipe_Bll.GetTestType(crafts_Recipe_Modle.ComponentName);
Stopwatch sw = new Stopwatch();
var stObj = lineObj.STATION.Single(n => n.Name == STName);
var opcitem = stObj.Opcitem.SingleOrDefault(n => n.Name == OPCName);
var tag = opcitem.Tag.SingleOrDefault(n => n.Tag == int.Parse(itemValue));
if (tag == null)
{
return;
}
recodePLCStationMessage(LineName + STName, "SN：" + sn + ",Start measuring data records", 0, false);
var dataList = tag.Dataitem;
sw.Start();
string dbColumnStr = string.Empty, dbValueStr = string.Empty, logInfo = string.Empty, result = string.Empty;
foreach (var item in dataList)
{
dbColumnStr += "[" + item.ColmnName + "]" + ",";
dbValueStr += ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + "','";
logInfo += item.ColmnName + " : " + ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)) + " , ";
if (item.ColmnName == "MeasureResult")
{
result = ABRead(abPlc[lineObj.Index], item.Addr, item.AddrType, ushort.Parse(item.AddrLength)).ToString();
recodePLCStationMessage(LineName + STName, "Measure name :" + testName + ",Step:" + stepNo + ", Result:" + result, 0, true);
}
}
sw.Stop();
sw.Reset();
#endregion
#region 检测星云插入到数据库的数据
string count = Trace_Measure_Bll.Select_Count_Measure_Table(STName, sn, opcitem.OperationDesc);
if (int.Parse(count) == 0)
{
recodePLCStationMessage(LineName + STName, "SN：" + sn + ",Step:" + stepNo + ",test name " + testName + " , need tace: " + XML_Tool.xml.TestDBConfig.Count + ",really trace :" + count + " failed!", 1, false);
ABWrite(abPlc[lineObj.Index], BackAddr, "12", opcitem.AddrType, 0);
return;
}
#endregion
#region 处理追溯结果
if (result == "1")
{
ABWrite(abPlc[lineObj.Index], BackAddr, "11", opcitem.AddrType, 0);//success
recodePLCStationMessage(LineName + STName, "Measure name :" + testName + ",Step:" + stepNo + ", Measurement data recording completed！", 0, false);
Recipe_Bll.Business(LineName, STName, stepNo + 1);
}
else
{
ABWrite(abPlc[lineObj.Index], BackAddr, "11", opcitem.AddrType, 0);//fail
recodePLCStationMessage(LineName + STName, "Measure name :" + testName + ",Step:" + stepNo + ", Measurement data recording completed！The result is NG！", 0, true);
}
#endregion
}
catch (Exception ex)
{
recodePLCStationMessage(LineName + STName, "Measurement traceability problems, abnormal information ：" + ex.Message, 0, true);
}
}
#endregion
#region 报警处理
if ((type == "Alarm" && OPCName == "模块故障" && itemValue != "0") ||
(type == "Alarm" && OPCName != "模块故障" && itemValue == "true"))
{
var dateTime = DateTime.Now;
var dateTimeInt = long.Parse(dateTime.ToString("yyMMddHHmmss"));
Line_StationAlarm_Bll.Insert(dateTimeInt, dateTime.ToString(), "", MA.Parameter["addr"], STName, "DeviceCheck_Alarm", OPCName);
}
#endregion
}
catch (Exception ex)
{
recodePLCStationMessage(string.Empty, " PLC business processing problems, abnormal information：" + ex.Message, 0, true);
}
}
/// <summary>
/// 更新步序和下发类别
/// </summary>
/// <param name="line"></param>
/// <param name="station"></param>
/// <param name="packPn"></param>
/// <param name="step"></param>
public static void Business(string lineName, string station, int step)
{
#region 检查当前步是否大于总步数
//string ss = Recipe_Bll.GetCacheStationInfo(station, "TotalStep");
//int totalStep = int.Parse(Recipe_Bll.GetCacheStationInfo(station, "TotalStep"));
//if (step > totalStep)
//{
// recodeRecipeMessage(lineName + station, "Current step can not more than the total Step, Current step:" + step + " , total step:" + totalStep, 1, true);
// return;
//}
#endregion
#region 变量
Recipe_Bll.WriteCacheStationInfo(station, "Step", step.ToString());
var lineObj = XML_Tool.xml.LINE.Single(n => n.Name == lineName);
var stationObj = lineObj.STATION.Single(n => n.Name == station);
Crafts_Recipe_Modle crafts_Recipe_Modle = GetSingleRecipe(station, step);
#endregion
#region 配方为空
if (crafts_Recipe_Modle == null)
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step：" + step + " ,Formula not found！", 1, true);
return;
}
#endregion
#region 扫描
if (crafts_Recipe_Modle.OperationType == "扫描" || crafts_Recipe_Modle.OperationType == "Scanning")
{
var opcObj = stationObj.Opcitem.Single(n => n.Name == "物料记录");
string backAddr = opcObj.BackAddr;
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], backAddr, "21", opcObj.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send scan address：" + backAddr + " , Write value ：21 ，Successfully written！", 0, true);
}
else
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send scan address：" + backAddr + " , Write value ：21 ，Write failure！", 0, true);
}
}
#endregion
#region 拧紧
if (crafts_Recipe_Modle.OperationType == "拧紧" || crafts_Recipe_Modle.OperationType == "Tighten")
{
var opcObj = stationObj.Opcitem.Single(n => n.Name == "拧紧记录");
string backAddr = opcObj.BackAddr;
var dataitemObj = opcObj.Tag.Single(n => n.Name == "拧紧下发").Dataitem;
foreach (var data in dataitemObj)
{
string sn = Recipe_Bll.GetCacheStationInfo(station, "SN");
if (data.ColmnName == "SN")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, sn, data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,SN：" + data.Addr + " , Write value ："
+ sn + " ，Successfully written！", 0, false);
}
}
if (data.ColmnName == "BlotNumber")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, crafts_Recipe_Modle.BlotNumber.ToString(), data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,BlotNumber：" + data.Addr + " , Write value ："
+ crafts_Recipe_Modle.BlotNumber.ToString() + " ，Successfully written！", 0, true);
}
}
if (data.ColmnName == "SleeveNo")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, crafts_Recipe_Modle.SleeveNo.ToString(), data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,SleeveNo：" + data.Addr + " , Write value ："
+ crafts_Recipe_Modle.SleeveNo.ToString() + " ，Successfully written！", 0, true);
}
}
if (data.ColmnName == "ProgramNo")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, crafts_Recipe_Modle.ProgramNo.ToString(), data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,ProgramNo：" + data.Addr + " , Write value ："
+ crafts_Recipe_Modle.ProgramNo.ToString() + " ，Successfully written！", 0, true);
}
}
}
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], backAddr, "21", opcObj.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send tightening address：" + backAddr + " , Write value ："
+ " 21，Successfully written！", 0, true);
}
else
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send tightening address：" + backAddr + " , Write value ："
+ " 21，Write failure！", 0, true);
}
}
#endregion
#region 测量
if (crafts_Recipe_Modle.OperationType == "测量" || crafts_Recipe_Modle.OperationType == "Measuring")
{
var opcObj = stationObj.Opcitem.Single(n => n.Name.Contains("测量记录"));
string backAddr = opcObj.BackAddr;
var dataitemObj = opcObj.Tag.Single(n => n.Name == "测量下发").Dataitem;
if (dataitemObj.Count == 0)//无需下发程序号
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], backAddr, "21", opcObj.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 21，Successfully written！", 0, true);
}
else
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 21，Write failure！", 0, true);
}
}
else
{
foreach (var data in dataitemObj)
{
if (data.Name == "ProgramNo")
{
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], data.Addr, crafts_Recipe_Modle.ProgramNo.ToString(), data.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ crafts_Recipe_Modle.ProgramNo.ToString() + " ，Successfully written！", 0, true);
}
}
}
if (PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], backAddr, "21", opcObj.AddrType, 0))
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 21，Successfully written！", 0, true);
}
else
{
recodeRecipeMessage(lineName + station, "Station：" + station + " , Step："
+ step + " ,Send measuring address：" + backAddr + " , Write value ："
+ " 21，Write failure！", 0, true);
}
}
}
#endregion
#region 结束
if (crafts_Recipe_Modle.OperationType == "结束" || crafts_Recipe_Modle.OperationType == "End")
{
string sn = Recipe_Bll.GetCacheStationInfo(station, "SN");
var opcObj = stationObj.Opcitem.Single(n => n.Name == "总成绑定");
PLC_Bll.ABWrite(PLC_Bll.abPlc[lineObj.Index], opcObj.BackAddr, "0", opcObj.AddrType, 0);
#region 获取工位结果以及工单号
int result = 1;
string workOrder = Crafts_CurPlan_Bll.Select_workOrder_Table();
#endregion
#region 数据转移
Trace_StationStatus_Bll.TraceData_Transfer(station, sn);
#endregion
#region 添加工位状态
trace_StationStatus_Modle.RecordTime = DateTime.Now.ToString();
trace_StationStatus_Modle.SN = sn;
trace_StationStatus_Modle.Station = station;
trace_StationStatus_Modle.StationBeat = PLC_Bll.timeAdd.ToString();
trace_StationStatus_Modle.StationStatue = result;
trace_StationStatus_Modle.WorkOrder = workOrder;
if (XML_Tool.xml.StationConfig.Single(n => n.Name == station).IsEnd == "1" ||
XML_Tool.xml.StationConfig.Single(n => n.Name == station).IsOutLine == "1")
{
trace_StationStatus_Bll.Insert_Condition_CurStationInfo_Table(trace_StationStatus_Modle, true);
}
else
{
trace_StationStatus_Bll.Insert_Condition_CurStationInfo_Table(trace_StationStatus_Modle, false);
}
PLC_Bll.timeAddFlag = false;
#endregion
#region 清除数据缓存
ResetCacheStationInfo(station);
ResetCacheStationRecipeInfo(station);
#endregion
recodeRecipeMessage(lineName + station, "Station：" + station + " , SN ：" + sn + " Go offline！", 0, true);
}
#endregion
}