private void RemoveTerrainTriangle(MyNavigationTriangle tri)
{
MyWingedEdgeMesh.FaceVertexEnumerator vertexEnumerator = tri.GetVertexEnumerator();
vertexEnumerator.MoveNext();
Vector3 current = vertexEnumerator.Current;
vertexEnumerator.MoveNext();
Vector3 vector2 = vertexEnumerator.Current;
vertexEnumerator.MoveNext();
Vector3 vector3 = vertexEnumerator.Current;
int edgeIndex = tri.GetEdgeIndex(0);
int num2 = tri.GetEdgeIndex(1);
int num3 = tri.GetEdgeIndex(2);
int num4 = edgeIndex;
if (!this.m_connectionHelper.TryRemoveOuterEdge(ref current, ref vector2, ref num4) && (base.Mesh.GetEdge(edgeIndex).OtherFace(tri.Index) != -1))
{
this.m_connectionHelper.AddOuterEdgeIndex(ref vector2, ref current, edgeIndex);
}
num4 = num2;
if (!this.m_connectionHelper.TryRemoveOuterEdge(ref vector2, ref vector3, ref num4) && (base.Mesh.GetEdge(num2).OtherFace(tri.Index) != -1))
{
this.m_connectionHelper.AddOuterEdgeIndex(ref vector3, ref vector2, num2);
}
num4 = num3;
if (!this.m_connectionHelper.TryRemoveOuterEdge(ref vector3, ref current, ref num4) && (base.Mesh.GetEdge(num3).OtherFace(tri.Index) != -1))
{
this.m_connectionHelper.AddOuterEdgeIndex(ref current, ref vector3, num3);
}
base.RemoveTriangle(tri);
}
private void RemoveTerrainTriangle(MyNavigationTriangle tri)
{
var vertices = tri.GetVertexEnumerator();
vertices.MoveNext();
Vector3 aPos = vertices.Current;
vertices.MoveNext();
Vector3 bPos = vertices.Current;
vertices.MoveNext();
Vector3 cPos = vertices.Current;
int edgeAB = tri.GetEdgeIndex(0);
int edgeBC = tri.GetEdgeIndex(1);
int edgeCA = tri.GetEdgeIndex(2);
int tmp;
ProfilerShort.Begin("Handling outer edges");
tmp = edgeAB;
if (!m_connectionHelper.TryRemoveOuterEdge(ref aPos, ref bPos, ref tmp))
{
var edge = Mesh.GetEdge(edgeAB);
if (edge.OtherFace(tri.Index) != -1)
{
m_connectionHelper.AddOuterEdgeIndex(ref bPos, ref aPos, edgeAB);
}
}
tmp = edgeBC;
if (!m_connectionHelper.TryRemoveOuterEdge(ref bPos, ref cPos, ref tmp))
{
var edge = Mesh.GetEdge(edgeBC);
if (edge.OtherFace(tri.Index) != -1)
{
m_connectionHelper.AddOuterEdgeIndex(ref cPos, ref bPos, edgeBC);
}
}
tmp = edgeCA;
if (!m_connectionHelper.TryRemoveOuterEdge(ref cPos, ref aPos, ref tmp))
{
var edge = Mesh.GetEdge(edgeCA);
if (edge.OtherFace(tri.Index) != -1)
{
m_connectionHelper.AddOuterEdgeIndex(ref aPos, ref cPos, edgeCA);
}
}
ProfilerShort.End();
ProfilerShort.Begin("Removing the tri");
RemoveTriangle(tri);
ProfilerShort.End();
}
private void RemoveTerrainTriangle(MyNavigationTriangle tri)
{
var vertices = tri.GetVertexEnumerator();
vertices.MoveNext();
Vector3 aPos = vertices.Current;
vertices.MoveNext();
Vector3 bPos = vertices.Current;
vertices.MoveNext();
Vector3 cPos = vertices.Current;
int edgeAB = tri.GetEdgeIndex(0);
int edgeBC = tri.GetEdgeIndex(1);
int edgeCA = tri.GetEdgeIndex(2);
int tmp;
ProfilerShort.Begin("Handling outer edges");
tmp = edgeAB;
if (!m_connectionHelper.TryRemoveOuterEdge(ref aPos, ref bPos, ref tmp))
{
var edge = Mesh.GetEdge(edgeAB);
if (edge.OtherFace(tri.Index) != -1)
m_connectionHelper.AddOuterEdgeIndex(ref bPos, ref aPos, edgeAB);
}
tmp = edgeBC;
if (!m_connectionHelper.TryRemoveOuterEdge(ref bPos, ref cPos, ref tmp))
{
var edge = Mesh.GetEdge(edgeBC);
if (edge.OtherFace(tri.Index) != -1)
m_connectionHelper.AddOuterEdgeIndex(ref cPos, ref bPos, edgeBC);
}
tmp = edgeCA;
if (!m_connectionHelper.TryRemoveOuterEdge(ref cPos, ref aPos, ref tmp))
{
var edge = Mesh.GetEdge(edgeCA);
if (edge.OtherFace(tri.Index) != -1)
m_connectionHelper.AddOuterEdgeIndex(ref aPos, ref cPos, edgeCA);
}
ProfilerShort.End();
ProfilerShort.Begin("Removing the tri");
RemoveTriangle(tri);
ProfilerShort.End();
}
private void RemoveTriangle(MyNavigationTriangle triangle, Vector3I cube)
{
var e = triangle.GetVertexEnumerator();
e.MoveNext();
Vector3I positionA = Vector3I.Round(e.Current * 256);
e.MoveNext();
Vector3I positionC = Vector3I.Round(e.Current * 256); // This is not a mistake! C is swapped with B (see also: AddTriangle...)
e.MoveNext();
Vector3I positionB = Vector3I.Round(e.Current * 256);
// This should be AB, BC and CA, but after swapping it's AC, CB and BA
int triCA = triangle.GetEdgeIndex(0);
int triBC = triangle.GetEdgeIndex(1);
int triAB = triangle.GetEdgeIndex(2);
int edgeAB, edgeBC, edgeCA;
if (!m_connectionHelper.TryGetValue(new EdgeIndex(ref positionA, ref positionB), out edgeAB))
{
edgeAB = -1;
}
if (!m_connectionHelper.TryGetValue(new EdgeIndex(ref positionB, ref positionC), out edgeBC))
{
edgeBC = -1;
}
if (!m_connectionHelper.TryGetValue(new EdgeIndex(ref positionC, ref positionA), out edgeCA))
{
edgeCA = -1;
}
// Register those edges that were not registered in the connection helper.
// They are registered counter-clockwise, because we are in fact registering the other triangle across the edges
if (edgeAB != -1 && triAB == edgeAB)
{
m_connectionHelper.Remove(new EdgeIndex(ref positionA, ref positionB));
}
else
{
m_connectionHelper.Add(new EdgeIndex(positionB, positionA), triAB);
}
if (edgeBC != -1 && triBC == edgeBC)
{
m_connectionHelper.Remove(new EdgeIndex(ref positionB, ref positionC));
}
else
{
m_connectionHelper.Add(new EdgeIndex(positionC, positionB), triBC);
}
if (edgeCA != -1 && triCA == edgeCA)
{
m_connectionHelper.Remove(new EdgeIndex(ref positionC, ref positionA));
}
else
{
m_connectionHelper.Add(new EdgeIndex(positionA, positionC), triCA);
}
List <int> list = null;
m_smallTriangleRegistry.TryGetValue(cube, out list);
Debug.Assert(list != null, "Removed triangle was not registered in the registry!");
for (int i = 0; i < list.Count; ++i)
{
if (list[i] == triangle.Index)
{
list.RemoveAtFast(i);
break;
}
}
if (list.Count == 0)
{
m_smallTriangleRegistry.Remove(cube);
}
RemoveTriangle(triangle);
if (edgeAB != -1 && triAB != edgeAB)
{
RemoveAndAddTriangle(ref positionA, ref positionB, edgeAB);
}
if (edgeBC != -1 && triBC != edgeBC)
{
RemoveAndAddTriangle(ref positionB, ref positionC, edgeBC);
}
if (edgeCA != -1 && triCA != edgeCA)
{
RemoveAndAddTriangle(ref positionC, ref positionA, edgeCA);
}
}
private void RemoveTriangle(MyNavigationTriangle triangle, Vector3I cube)
{
int num4;
int num5;
int num6;
MyWingedEdgeMesh.FaceVertexEnumerator vertexEnumerator = triangle.GetVertexEnumerator();
vertexEnumerator.MoveNext();
Vector3I pointA = Vector3I.Round(vertexEnumerator.Current * 256f);
vertexEnumerator.MoveNext();
Vector3I pointB = Vector3I.Round(vertexEnumerator.Current * 256f);
vertexEnumerator.MoveNext();
Vector3I vectori3 = Vector3I.Round(vertexEnumerator.Current * 256f);
int edgeIndex = triangle.GetEdgeIndex(0);
int num2 = triangle.GetEdgeIndex(1);
int num3 = triangle.GetEdgeIndex(2);
if (!this.m_connectionHelper.TryGetValue(new EdgeIndex(ref pointA, ref vectori3), out num4))
{
num4 = -1;
}
if (!this.m_connectionHelper.TryGetValue(new EdgeIndex(ref vectori3, ref pointB), out num5))
{
num5 = -1;
}
if (!this.m_connectionHelper.TryGetValue(new EdgeIndex(ref pointB, ref pointA), out num6))
{
num6 = -1;
}
if ((num4 == -1) || (num3 != num4))
{
this.m_connectionHelper.Add(new EdgeIndex(vectori3, pointA), num3);
}
else
{
this.m_connectionHelper.Remove(new EdgeIndex(ref pointA, ref vectori3));
}
if ((num5 == -1) || (num2 != num5))
{
this.m_connectionHelper.Add(new EdgeIndex(pointB, vectori3), num2);
}
else
{
this.m_connectionHelper.Remove(new EdgeIndex(ref vectori3, ref pointB));
}
if ((num6 == -1) || (edgeIndex != num6))
{
this.m_connectionHelper.Add(new EdgeIndex(pointA, pointB), edgeIndex);
}
else
{
this.m_connectionHelper.Remove(new EdgeIndex(ref pointB, ref pointA));
}
List <int> list = null;
this.m_smallTriangleRegistry.TryGetValue(cube, out list);
int index = 0;
while (true)
{
if (index < list.Count)
{
if (list[index] != triangle.Index)
{
index++;
continue;
}
list.RemoveAtFast <int>(index);
}
if (list.Count == 0)
{
this.m_smallTriangleRegistry.Remove(cube);
}
base.RemoveTriangle(triangle);
if ((num4 != -1) && (num3 != num4))
{
this.RemoveAndAddTriangle(ref pointA, ref vectori3, num4);
}
if ((num5 != -1) && (num2 != num5))
{
this.RemoveAndAddTriangle(ref vectori3, ref pointB, num5);
}
if ((num6 != -1) && (edgeIndex != num6))
{
this.RemoveAndAddTriangle(ref pointB, ref pointA, num6);
}
return;
}
}
private void RemoveTriangle(MyNavigationTriangle triangle, Vector3I cube)
{
var e = triangle.GetVertexEnumerator();
e.MoveNext();
Vector3I positionA = Vector3I.Round(e.Current * 256);
e.MoveNext();
Vector3I positionC = Vector3I.Round(e.Current * 256); // This is not a mistake! C is swapped with B (see also: AddTriangle...)
e.MoveNext();
Vector3I positionB = Vector3I.Round(e.Current * 256);
// This should be AB, BC and CA, but after swapping it's AC, CB and BA
int triCA = triangle.GetEdgeIndex(0);
int triBC = triangle.GetEdgeIndex(1);
int triAB = triangle.GetEdgeIndex(2);
int edgeAB, edgeBC, edgeCA;
if (!m_connectionHelper.TryGetValue(new EdgeIndex(ref positionA, ref positionB), out edgeAB)) edgeAB = -1;
if (!m_connectionHelper.TryGetValue(new EdgeIndex(ref positionB, ref positionC), out edgeBC)) edgeBC = -1;
if (!m_connectionHelper.TryGetValue(new EdgeIndex(ref positionC, ref positionA), out edgeCA)) edgeCA = -1;
// Register those edges that were not registered in the connection helper.
// They are registered counter-clockwise, because we are in fact registering the other triangle across the edges
if (edgeAB != -1 && triAB == edgeAB)
m_connectionHelper.Remove(new EdgeIndex(ref positionA, ref positionB));
else
m_connectionHelper.Add(new EdgeIndex(positionB, positionA), triAB);
if (edgeBC != -1 && triBC == edgeBC)
m_connectionHelper.Remove(new EdgeIndex(ref positionB, ref positionC));
else
m_connectionHelper.Add(new EdgeIndex(positionC, positionB), triBC);
if (edgeCA != -1 && triCA == edgeCA)
m_connectionHelper.Remove(new EdgeIndex(ref positionC, ref positionA));
else
m_connectionHelper.Add(new EdgeIndex(positionA, positionC), triCA);
List<int> list = null;
m_smallTriangleRegistry.TryGetValue(cube, out list);
Debug.Assert(list != null, "Removed triangle was not registered in the registry!");
for (int i = 0; i < list.Count; ++i)
{
if (list[i] == triangle.Index)
{
list.RemoveAtFast(i);
break;
}
}
if (list.Count == 0)
m_smallTriangleRegistry.Remove(cube);
RemoveTriangle(triangle);
if (edgeAB != -1 && triAB != edgeAB)
RemoveAndAddTriangle(ref positionA, ref positionB, edgeAB);
if (edgeBC != -1 && triBC != edgeBC)
RemoveAndAddTriangle(ref positionB, ref positionC, edgeBC);
if (edgeCA != -1 && triCA != edgeCA)
RemoveAndAddTriangle(ref positionC, ref positionA, edgeCA);
}