/// <summary>
///
/// </summary>
/// <param name="documentID"></param>
/// <param name="unitnum"></param>
/// <param name="apptid"></param>
///
public void CreateHtmlDocument(int documentID, string unitnum, int apptid)
{
template = new DocumentTemplate();
template.SetPatient(SessionManager.Instance.GetActivePatient());
template.documentTemplateID = documentID;
template.BackgroundLoadWork();
template.OpenHTML();
template.ProcessDocument();
}
public string GenerateHtmlDocument(int documentID, string unitnum, int apptid)
{
SessionManager.Instance.SetActivePatientNoCallback(unitnum, apptid);
DocumentTemplate dt = new DocumentTemplate();
dt.documentTemplateID = documentID;
dt.BackgroundLoadWork();
dt.OpenHTML();
dt.ProcessDocument();
SessionManager.Instance.Shutdown();
return dt.htmlText;
}
public string GenerateHtmlDocument(int documentID, string unitnum, int apptid, string configFile)
{
RiskApps3.Utilities.Configurator.configFilePath = configFile;
SessionManager.Instance.SetCoreConfigPath(configFile);
SessionManager.Instance.SetActivePatientNoCallback(unitnum, apptid);
DocumentTemplate dt = new DocumentTemplate();
dt.documentTemplateID = documentID;
dt.BackgroundLoadWork();
dt.OpenHTML();
dt.ProcessDocument();
SessionManager.Instance.Shutdown();
return dt.htmlText;
}
private void backgroundWorker2_DoWork(object sender, DoWorkEventArgs e)
{
List<Appointment> appts = (List<Appointment>)e.Argument;
try
{
foreach (object o in appts)
{
Appointment appt = (Appointment)o;
if (appt.CloudWebQueueState == CREATE_NEW_APPT || appt.CloudWebQueueState == SYNCH_APPT)
{
backgroundWorker2.ReportProgress(2, "Retrieving Patient Record: " + appt.patientname + " - " + appt.dob);
XmlNode xml = cloud.FetchPatientRecord(appt.apptID);
MemoryStream stm = new MemoryStream();
StreamWriter stw = new StreamWriter(stm);
stw.Write(xml.OuterXml);
stw.Flush();
stm.Position = 0;
backgroundWorker2.ReportProgress(2, "Saving Data: " + appt.patientname + " - " + appt.dob);
DataContractSerializer ds = new DataContractSerializer(typeof(Patient));
Patient p2 = (Patient)ds.ReadObject(stm);
if (appt.CloudWebQueueState == CREATE_NEW_APPT)
{
Utilities.ParameterCollection pc = new RiskApps3.Utilities.ParameterCollection();
pc.Add("unitnum", p2.unitnum);
pc.Add("patientname", p2.name);
pc.Add("dob", p2.dob);
pc.Add("clinicId", appt.clinicID);
object newApptId = BCDB2.Instance.ExecuteSpWithRetValAndParams("sp_createMasteryAppointment", SqlDbType.Int, pc);
p2.apptid = (int)newApptId;
}
else if (appt.CloudWebQueueState == SYNCH_APPT)
{
p2.apptid = appt.CloudWebQueueSynchId;
}
p2.FHx.proband = p2;
p2.PersistFullObject(new RiskApps3.Model.HraModelChangedEventArgs(null));
if (checkBox4.Checked)
{
backgroundWorker2.ReportProgress(2, "Marking Complete and updating meta data: " + appt.patientname + " - " + appt.dob);
ParameterCollection pc = new ParameterCollection("apptID", p2.apptid);
BCDB2.Instance.RunSPWithParams("sp_markRiskDataCompleted", pc);
}
if (checkBox1.Checked)
{
backgroundWorker2.ReportProgress(2, "Running Risk Models: " + appt.patientname + " - " + appt.dob);
p2.RecalculateRisk();
ParameterCollection pc = new ParameterCollection("unitnum", p2.unitnum);
BCDB2.Instance.RunSPWithParams("sp_3_populateBigQueue", pc);
}
if (checkBox2.Checked)
{
backgroundWorker2.ReportProgress(2, "Printing Automation Documents: " + appt.patientname + " - " + appt.dob);
ParameterCollection printDocArgs = new ParameterCollection();
printDocArgs.Add("apptid", p2.apptid);
SqlDataReader reader = BCDB2.Instance.ExecuteReaderSPWithParams("sp_AutomationHtmlDocsToPrint", printDocArgs);
while (reader.Read())
{
int templateID = -1;
if (reader.IsDBNull(0) == false)
{
templateID = reader.GetInt32(0);
}
SessionManager.Instance.SetActivePatientNoCallback(p2.unitnum, p2.apptid);
DocumentTemplate template = new DocumentTemplate();
template.documentTemplateID = templateID;
template.BackgroundLoadWork();
template.OpenHTML();
template.ProcessDocument();
htmlInProgress = true;
backgroundWorker2.ReportProgress(1, template.htmlText);
while (htmlInProgress)
{
Application.DoEvents();
Thread.Sleep(500);
}
}
}
if (checkBox5.Checked)
{
backgroundWorker2.ReportProgress(2, "Removing Web Survey: " + appt.patientname + " - " + appt.dob);
backgroundWorker2.ReportProgress(4, appt);
cloud.DeleteSurvey(appt.apptID);
}
backgroundWorker2.ReportProgress(2, "Precessing Queue Documents: " + appt.patientname + " - " + appt.dob);
if (checkBox3.Checked)
{
ParameterCollection pc = new ParameterCollection("apptID", p2.apptid);
BCDB2.Instance.RunSPWithParams("sp_processQueueDocuments", pc);
}
}
else if (appt.CloudWebQueueState == DELETE_APPT)
{
backgroundWorker2.ReportProgress(2, "Removing Web Survey: " + appt.patientname + " - " + appt.dob);
backgroundWorker2.ReportProgress(4, appt);
cloud.DeleteSurvey(appt.apptID);
}
backgroundWorker2.ReportProgress(3,o);
}
}
catch (Exception exc)
{
Logger.Instance.WriteToLog(exc.ToString());
}
}
// ported from SimpleInfoScreen jdg 8/31/15 per Brian
public DocumentTemplate MakeDocument(Patient proband, int templateID, string templatesRoot)
{
DocumentTemplate dt = new DocumentTemplate();
dt.documentTemplateID = templateID;
dt.SetPatient(proband);
dt.BackgroundLoadWork();
if (!String.IsNullOrEmpty(templatesRoot))
{
dt.htmlPath = Path.Combine(templatesRoot, Path.GetFileName(dt.htmlPath));
}
dt.OpenHTML();
dt.ProcessDocument();
return dt;
}
private void backgroundWorker2_DoWork(object sender, DoWorkEventArgs e)
{
string sql = "select documentTemplateID from lkpDocumentTemplates where routinename = 'ClinicReport'";
using (SqlConnection connection = new SqlConnection(BCDB2.Instance.getConnectionString()))
{
connection.Open();
SqlCommand command = new SqlCommand(sql, connection);
try
{
SqlDataReader reader = command.ExecuteReader();
if (reader != null)
{
while (reader.Read())
{
if (reader.IsDBNull(0) == false)
{
DocumentTemplate dt = new DocumentTemplate();
dt.documentTemplateID = reader.GetInt32(0);
dt.BackgroundLoadWork();
backgroundWorker2.ReportProgress(0, dt);
}
}
reader.Close();
}
}
catch (Exception exception)
{
Logger.Instance.WriteToLog(exception.ToString());
}
}
}
private void PreProcessReportTemplate(DocumentTemplate reportTemplate)
{
reportTemplate.htmlText = reportTemplate.htmlText.Replace("#reportDate#", DateTime.Now.ToShortDateString());
reportTemplate.htmlText = reportTemplate.htmlText.Replace("#reportStart#", StartTime.ToShortDateString());
reportTemplate.htmlText = reportTemplate.htmlText.Replace("#reportEnd#", EndTime.ToShortDateString());
reportTemplate.htmlText = reportTemplate.htmlText.Replace("#clinicChoice#", clinicName);
reportTemplate.htmlText = reportTemplate.htmlText.Replace("#clinicId#", clinicId.ToString());
}
private void button1_Click(object sender, EventArgs e)
{
button1.Enabled = false;
winFormHtmlEditor1.Focus();
winFormHtmlEditor1.DocumentHtml = "";
progressBar1.Enabled = true;
progressBar1.Visible = true;
winFormHtmlEditor1.Enabled = false;
label5.Visible = true;
reportTemplate = (DocumentTemplate)ReportCombo.SelectedItem;
clinicId = ((Clinic)(ClinicCombo.SelectedItem)).clinicID;
clinicName = ((Clinic)(ClinicCombo.SelectedItem)).clinicName;
StartTime = dateTimePicker1.Value;
EndTime = dateTimePicker2.Value;
backgroundWorker1.RunWorkerAsync();
}
private static string extractHL7(DocumentTemplate dt, string segmentList)
{
StringBuilder sb = new StringBuilder();
string[] segments;
if (!String.IsNullOrEmpty(segmentList))
{
segments = segmentList.Split('|');
}
else
{
segments = new string[] { "MSH", "PID", "PV1", "OBR", "OBX" }; // stick in some defaults... is this a good idea?
}
foreach (string segment in segments)
{
if (!String.IsNullOrEmpty(dt.doc.GetElementbyId(segment).InnerText))
{
sb.Append(dt.doc.GetElementbyId(segment).InnerText); // required
sb.Append((char)0x0D);
}
else
{
Logger.Instance.WriteToLog("Powerscribe error: segment " + segment + " was not successfully built. Check your database instance for stored procedure GetHL7ORU" + segment + ", or whatever stored procedure is referenced in your HTML template. ");
}
}
return sb.ToString();
}
/// <summary>
/// send this document to Powerscribe as an ORU message using lkpInterfaceDefinitions
/// IFF this is a POWERSCRIBE interface.
/// </summary>
/// <param name="dt">DocumentTemplate</param>
/// <returns></returns>
public static bool sendPowerscribe(DocumentTemplate dt)
{
// fetch interfaceId from the document template...
int interfaceId = -1;
bool returnValue = false;
string interfaceType = "";
string ip = "";
string port = "";
string segmentList = "";
ParameterCollection psArgs = new ParameterCollection();
psArgs.Add("documentTemplateID", dt.documentTemplateID);
try
{
// NOTE: only ONE Powerscribe interface is currently supported. The PACS code will support multiple interfaces per document template.
// It seems unlikely that there will be multiple Powerscribe interfaces per document, but if there are, then you will have to add in the
// code to iterate through multiple rows returned from this SP call and process them individually as shown in the PACS code, below. jdg 8/17/15
SqlDataReader reader = BCDB2.Instance.ExecuteReaderSPWithParams("sp_getInterfaceDefinitionFromTemplateID", psArgs);
while (reader.Read())
{
if (reader.IsDBNull(0) == false)
{
interfaceId = reader.GetInt32(0);
}
if (reader.IsDBNull(1) == false)
{
interfaceType = reader.GetString(1);
}
if (reader.IsDBNull(2) == false)
{
ip = reader.GetString(2);
}
if (reader.IsDBNull(3) == false)
{
port = reader.GetString(3);
}
if (reader.IsDBNull(4) == false)
{
segmentList = reader.GetString(4);
}
}
}
catch (Exception e)
{
Logger.Instance.WriteToLog("SendPowerscribe: Error running sp_getInterfaceDefinitionsfromTemplateID, error = " + e.Message);
return false;
}
if ((!String.IsNullOrEmpty(interfaceType)) && (interfaceType.ToUpper() == "POWERSCRIBE") && (interfaceId > 0))
{
// note: this method returns a bool success flag... use it to
returnValue = sendPowerscribe(dt, interfaceId, interfaceType, ip, port, segmentList);
}
return returnValue;
}
/// <summary>
/// Send the PDF document referenced by "dt" to the PACS system defined in the database lkpInterfaceDefinitions for this document
/// effective 1/22/16 the values required to be present in lkpInterfaceDefinitions are as follows:
/// interfaceType = "PACS"
/// ipAddress, port self explanatory
/// stringParam1: "their" AET
/// stringParam2: "our" AET
/// stringParam3: qualified path to DCMTK binaries, e.g., C:\HUGHES_DCMTK_DICOM\bin
/// intParam1: send file type, see enum. 1=pdf, 2=jpg, 3=bmp
/// stringParam4: Modality to send to PACS. Defaults to "OT"
/// stringParam5: Additional parameters. see documentation for DCMTK "storescu". e.g., when sending a jpg, you might have to specify jpg type, e.g., "-xy"
/// </summary>
/// <param name="dt">Document Template, as per the HTML document generation</param>
/// <param name="patient">V3 Patient object</param>
/// <param name="filename">Name of the PDF file to be converted to a .DCM (DICOM) file and transmitted to PACS</param>
/// <param name="apptId">Appointment ID</param>
/// <returns></returns>
public static bool send2PACS(DocumentTemplate dt, RiskApps3.Model.PatientRecord.Patient patient, string filenameIn, int apptId)
{
List<TripleArg> args = new List<TripleArg>(); // for want of a tuple which doesn't exist till .NET 4.0
List<KeyValuePair<string, string>> dicomOutputArgs = new List<KeyValuePair<string, string>>();
List<InterfaceInstance> interfaces = new List<InterfaceInstance>();
string accessionNumber = "";
string patientname = "";
string dob = "";
string gender = "";
string apptDate = "";
string apptTime = "";
ParameterCollection pacsArgs = new ParameterCollection();
pacsArgs.Add("documentTemplateID", dt.documentTemplateID);
string filename;
Image img = null;
SqlDataReader reader = BCDB2.Instance.ExecuteReaderSPWithParams("sp_getInterfaceDefinitionFromTemplateID", pacsArgs);
while (reader.Read())
{
InterfaceInstance instance = new InterfaceInstance();
if (reader.IsDBNull(0) == false)
{
instance.InterfaceId = reader.GetInt32(0);
}
if (reader.IsDBNull(1) == false)
{
instance.InterfaceType = reader.GetString(1);
}
if (reader.IsDBNull(2) == false)
{
instance.IpAddress = reader.GetString(2);
}
if (reader.IsDBNull(3) == false)
{
instance.Port = reader.GetString(3);
}
if (reader.IsDBNull(4) == false)
{
instance.AeTitleRemote = reader.GetString(4);
}
if (reader.IsDBNull(5) == false)
{
instance.AeTitleLocal = reader.GetString(5);
}
if (reader.IsDBNull(6) == false)
{
instance.DCMTKpath = reader.GetString(6);
}
if (reader.IsDBNull(7) == false)
{
instance.PacsSubType = reader.GetInt32(7); // for now, 1 == PDF, 2 == JPG, 3 == BMP (see enum pacsSubTypes, above)
}
// there is no intParam2 for PACS as yet...skipping ahead to the new-as-of-jan-2016 string param 4
if (reader.IsDBNull(9) == false)
{
instance.Modality = reader.GetString(9);
}
if (reader.IsDBNull(10) == false)
{
instance.AdditionalParams = reader.GetString(10);
}
if (instance.InterfaceId > 0)
{
interfaces.Add(instance); // multiple PACS interfaces per document are now supported.
}
}
// just do this once...
if (apptId > 0)
{
// This is an FMH specific hack, they are sending the Accession Number in the HL7 ADT_A08 message in PID|26...
// and it is being stored in the appointment table in the unused field "referral".
// No more obvious way of accomplishing this has jumped out at me yet, but this will have to be made more generic as new
// customers are brought on-line.
string sqlStr = "SELECT referral,patientname,dob,gender,apptDate,apptTime FROM tblAppointments WHERE apptID=" + apptId.ToString() + ";";
reader = BCDB2.Instance.ExecuteReader(sqlStr);
while (reader.Read())
{
if (reader.IsDBNull(0) == false)
{
accessionNumber = reader.GetString(0);
}
if (reader.IsDBNull(1) == false) // taking this from appointment table, alternatively, could use Patient object
{
patientname = reader.GetString(1);
}
if (reader.IsDBNull(2) == false)
{
dob = reader.GetString(2);
}
if (reader.IsDBNull(3) == false)
{
gender = reader.GetString(3);
}
if (reader.IsDBNull(4) == false)
{
apptDate = reader.GetString(4);
}
if (reader.IsDBNull(5) == false)
{
apptTime = reader.GetString(5);
}
}
reader.Close();
}
foreach (InterfaceInstance iface in interfaces) // send document to each eligible interface, converting it as need be
{
if ((iface.InterfaceId > 0) && (iface.InterfaceType == "PACS")) // no interface? not a PACS interface? bye bye!
{
// Ok! We're sending this thing to PACS... go ahead and convert the PDF file to a DCM file...
// This will call into the DCMTK library to do their pdf2dcm, dcmodify (to set metadata), and storescu. Add appropriate parameters to the DCM.
filename = filenameIn; // reinit
// filter out oddball cases of calling this method with conflicting interface parameters versus the type of file passed in.
// however, we WILL reconvert PDFs to an image upon demand, see below.
if (((filename.ToUpper().Contains(".JPG")) || (filename.ToUpper().Contains(".BMP"))) && (iface.PacsSubType == (int)pacsSubTypes.PDF))
{
Logger.Instance.WriteToLog("Send2PACS: Attempted to send an image file to a PDF interface, interfaceID #" + iface.InterfaceId + ". Request Aborted" + (apptId > 0 ? " for appt id " + apptId.ToString() + "." : "."));
continue;
}
if (iface.PacsSubType == (int)pacsSubTypes.JPG) // jpg
{
// If we were sent a PDF file, yet it's pacsSubType is different, convert the document to an image
// this could happen depending on what type of file is generated from the survey, and the settings made in lkpInterfaceDefinitions
// as of now, we're not converting between jpgs and bmps... if you send a bmp and interface type is jpg, bail... and vice versa
if (filename.ToUpper().Contains(".BMP"))
{
Logger.Instance.WriteToLog("Send2PACS: Attempted to send a BMP file to a JPG interface. Request Aborted" + (apptId > 0 ? " for appt id " + apptId.ToString() + "." : "."));
continue;
}
if (filename.ToUpper().Contains(".PDF")) // re-convert this html to an image instead
{
HtmlToImageConverter htmlToJpgConverter = new HtmlToImageConverter();
htmlToJpgConverter.LicenseKey = "sjwvPS4uPSskPSgzLT0uLDMsLzMkJCQk";
filename = filename.ToUpper().Replace(".PDF", "") + ".jpg";
htmlToJpgConverter.ConvertHtmlToFile(dt.htmlText, "", System.Drawing.Imaging.ImageFormat.Jpeg, filename);
}
}
if ((iface.PacsSubType == (int)pacsSubTypes.BMP) || (iface.PacsSubType == (int)pacsSubTypes.inverseBMP)) // bitmap
{
// If we were sent a PDF file, yet it's pacsSubType is different, convert the document to an image
// this could happen depending on what type of file is generated from the survey, and the settings made in lkpInterfaceDefinitions
// as of now, we're not converting between jpgs and bmps... if you send a bmp and interface type is jpg, bail... and vice versa
if (filename.ToUpper().Contains(".JPG"))
{
Logger.Instance.WriteToLog("Send2PACS: Attempted to send a JPG file to a BMP interface. Request Aborted" + (apptId > 0 ? " for appt id " + apptId.ToString() + "." : "."));
continue;
}
if (filename.ToUpper().Contains(".PDF")) // re-convert this html to an image instead
{
HtmlToImageConverter htmlToJpgConverter = new HtmlToImageConverter();
htmlToJpgConverter.LicenseKey = "sjwvPS4uPSskPSgzLT0uLDMsLzMkJCQk";
filename = filename.ToUpper().Replace(".PDF", "") + ".bmp";
if (iface.PacsSubType == (int)pacsSubTypes.inverseBMP)
{
img = htmlToJpgConverter.ConvertHtmlToImageObject(dt.htmlText, "");
}
else
{
htmlToJpgConverter.ConvertHtmlToFile(dt.htmlText, "", System.Drawing.Imaging.ImageFormat.Bmp, filename);
}
}
// jdg 1/26/2016 invert bmp
if (iface.PacsSubType == (int)pacsSubTypes.inverseBMP)
{
InvertBitmap(filename, img);
}
}
args.Clear();
string dcmFilename = filename + ".dcm";
TripleArg arg1 = new TripleArg();
//arg1.ArgSwitch = filename;
arg1.ArgSwitch = "\"" + filename + "\"";
args.Add(arg1);
TripleArg arg2 = new TripleArg();
//arg2.ArgSwitch = dcmFilename;
arg2.ArgSwitch = "\"" + dcmFilename + "\"";
args.Add(arg2);
if ((patient != null) && (iface.PacsSubType == (int)pacsSubTypes.PDF)) // for some reason, img2dcm (jpg) doesn't have a patient identifier arg. will have to insert this into the metadata later.
{
TripleArg arg3 = new TripleArg();
arg3.ArgSwitch = "+pi";
arg3.Name = patient.unitnum;
args.Add(arg3);
}
if ((iface.PacsSubType == (int)pacsSubTypes.BMP) || (iface.PacsSubType == (int)pacsSubTypes.inverseBMP)) // defaults to jpg
{
TripleArg arg4 = new TripleArg();
arg4.ArgSwitch = "-i";
arg4.Name = "BMP";
args.Add(arg4);
}
if ((iface.PacsSubType == (int)pacsSubTypes.JPG) || (iface.PacsSubType == (int)pacsSubTypes.BMP) || (iface.PacsSubType == (int)pacsSubTypes.inverseBMP)) // jpg, bmp
{
// do the conversion jpg --> dcm; this is a local command, no ip/port needed for this one.
wrapDCMTKmethodAsExternalCommand(null, null, iface.DCMTKpath + "\\img2dcm.exe", args);
}
else
{
// do the conversion pdf --> dcm; this is a local command, no ip/port needed for this one.
wrapDCMTKmethodAsExternalCommand(null, null, iface.DCMTKpath + "\\pdf2dcm.exe", args);
}
if (!File.Exists(dcmFilename))
{
Logger.Instance.WriteToLog("Send2PACS: Unable to convert JPG or PDF to DCM OR perhaps just unable to write it to disk. Check lkp_AutomationDocuments, lkpInterfaceDefinitions, document storage location and DICOM binary library (" + iface.DCMTKpath + ") for existence and/or permissions. Filename: " + dcmFilename + ".");
continue; // something went wrong, but didn't throw an error...
}
// I'm guessing that we'll be adding a study/series ID later, just add another TripleArg here, if you didn't build the DCM with it in the metadata initially
// If you need to fetch the UID, here is a sample of what a findscu would look like... don't forget the -aec and -aet...
// findscu localhost 5678 -S -k StudyInstanceUID -k QueryRetrieveLevel=STUDY -k AccessionNumber=22222893 -aet Hughes -aec Hughes2
// and of course, you have to read the resulting array list.
args.Clear();
TripleArg modArg0 = new TripleArg(); // dcm file name
modArg0.ArgSwitch = "\"" + dcmFilename + "\"";
args.Add(modArg0);
if (!String.IsNullOrEmpty(accessionNumber))
{
TripleArg modArg1 = new TripleArg(); // accession number
modArg1.ArgSwitch = "-m";
modArg1.Name = "AccessionNumber"; // DICOM literal string, do not modify
modArg1.Value = accessionNumber;
args.Add(modArg1);
}
else
{
// make a note of this circumstance, it's especially critical for FMH
Logger.Instance.WriteToLog("Send2PACS: Accession number is not set for Interface #" + iface.InterfaceId + " for appt # : " + apptId.ToString());
}
TripleArg modArg2 = new TripleArg(); // Modality hard-coded to "OT". May need to be parameterized later.
modArg2.ArgSwitch = "-i";
modArg2.Name = "Modality"; // DICOM literal string, do not modify
modArg2.Value = iface.Modality; // "OT"; no longer hard-coded jdg 1/21/16
args.Add(modArg2);
TripleArg modArg3 = new TripleArg(); // Patient Name
modArg3.ArgSwitch = "-m";
modArg3.Name = "PatientName"; // DICOM literal string, do not modify
patientname = patientname.Replace(", ", ","); // hack for extra space in name...
patientname = patientname.Replace(", ", ","); // hack for extra space in name...
modArg3.Value = "\"" + patientname.Replace(",", "^") + "\"";
args.Add(modArg3);
try
{
if (!String.IsNullOrEmpty(dob))
{
dob = DateTime.ParseExact(dob, "MM/dd/yyyy", CultureInfo.InvariantCulture).ToString("yyyyMMdd"); // FMH preferred format... DICOM Standard??
}
}
catch (Exception) { } // else use dob as found in database
TripleArg modArg4 = new TripleArg(); // Date of Birth
modArg4.ArgSwitch = "-m";
modArg4.Name = "PatientBirthDate"; // DICOM literal string, do not modify
modArg4.Value = dob;
args.Add(modArg4);
TripleArg modArg5 = new TripleArg(); // Gender
modArg5.ArgSwitch = "-m";
modArg5.Name = "PatientSex"; // DICOM literal string, do not modify
modArg5.Value = gender;
args.Add(modArg5);
try
{
if (!String.IsNullOrEmpty(apptDate))
{
apptDate = DateTime.ParseExact(apptDate, "MM/dd/yyyy", CultureInfo.InvariantCulture).ToString("yyyyMMdd");
}
}
catch (Exception) { } // else use apptDate as found in database
TripleArg modArg6 = new TripleArg(); // Study Date
modArg6.ArgSwitch = "-m";
modArg6.Name = "StudyDate"; // DICOM literal string, do not modify
modArg6.Value = apptDate;
args.Add(modArg6);
if ((iface.PacsSubType == (int)pacsSubTypes.JPG) || (iface.PacsSubType == (int)pacsSubTypes.BMP)) // pdf already has this in the metadata; img2dcm won't take patient id argument like pdf2dcm, for reasons that escape me
{
TripleArg modArg7 = new TripleArg(); // MRN
modArg7.ArgSwitch = "-m";
modArg7.Name = "PatientID"; // DICOM literal string, do not modify
modArg7.Value = patient.unitnum;
args.Add(modArg7);
}
try
{
if (!String.IsNullOrEmpty(apptTime))
{
apptTime = DateTime.ParseExact(apptTime, "hh:mm tt", CultureInfo.InvariantCulture).ToString("hhmm") + "00";
TripleArg modArg8 = new TripleArg(); // Date of Birth
modArg8.ArgSwitch = "-m";
modArg8.Name = "StudyTime"; // DICOM literal string, do not modify
modArg8.Value = apptTime;
args.Add(modArg8);
}
}
catch (Exception) { } // no time? no big deal.
TripleArg modArg9 = new TripleArg(); // Study ID
modArg9.ArgSwitch = "-m";
modArg9.Name = "StudyID"; // DICOM literal string, do not modify
//modArg9.Value = "1";
modArg9.Value = iface.InterfaceId.ToString();
args.Add(modArg9);
TripleArg modArg10 = new TripleArg(); // Series ID
modArg10.ArgSwitch = "-m";
modArg10.Name = "SeriesNumber"; // DICOM literal string, do not modify
//modArg10.Value = "1";
modArg10.Value = iface.InterfaceId.ToString();
args.Add(modArg10);
TripleArg modArg11 = new TripleArg(); // Instance
modArg11.ArgSwitch = "-m";
modArg11.Name = "InstanceNumber"; // DICOM literal string, do not modify
//modArg11.Value = "1";
modArg11.Value = iface.InterfaceId.ToString();
args.Add(modArg11);
wrapDCMTKmethodAsExternalCommand(null, null, iface.DCMTKpath + "\\dcmodify.exe", args);
args.Clear();
TripleArg sendArg1 = new TripleArg(); // file to xmit
sendArg1.ArgSwitch = "\"" + dcmFilename + "\"";
args.Add(sendArg1);
TripleArg sendArg2 = new TripleArg(); // ae title HRA
sendArg2.ArgSwitch = "-aet";
sendArg2.Name = iface.AeTitleLocal;
args.Add(sendArg2);
TripleArg sendArg3 = new TripleArg(); // ae title remote
sendArg3.ArgSwitch = "-aec";
sendArg3.Name = iface.AeTitleRemote;
args.Add(sendArg3);
if (!String.IsNullOrEmpty(iface.AdditionalParams))
{
TripleArg sendArg4 = new TripleArg(); // additional params
sendArg4.ArgSwitch = iface.AdditionalParams;
args.Add(sendArg4);
}
// Send it out... finally!
dicomOutputArgs = wrapDCMTKmethodAsExternalCommand(iface.IpAddress, iface.Port, iface.DCMTKpath + "\\storescu.exe", args);
// todo: parse out any useful returned values... in the meantime, unless an error is thrown we'll return success
Logger.Instance.WriteToLog("Send2PACS: Successful send to " + iface.AeTitleRemote + " for Interface #" + iface.InterfaceId + " " + (apptId > 0 ? " for appt id " + apptId.ToString() : ""));
try
{
File.Delete(dcmFilename); // no point in keeping these around.
File.Delete(dcmFilename + ".bak");
File.Delete(filename);
}
catch (Exception e)
{
Logger.Instance.WriteToLog("Send2PACS: Unable to delete " + dcmFilename + ", underlying error was " + e.Message);
}
}
}
// if some interfaces were processed, return true.
if (interfaces.Count > 0) return true;
else return false;
}
private static bool sendPowerscribe(DocumentTemplate dt, int interfaceId, string interfaceType, string ip, string port, string hl7SegmentList)
{
bool returnValue = false;
if ((!String.IsNullOrEmpty(ip)) && (!String.IsNullOrEmpty(port)))
{
string str = null;
string hl7Response = "";
TcpClient client;
Stream stream = null;
try
{
client = new TcpClient(ip, Int32.Parse(port));
client.SendTimeout = 5000; // milliseconds
client.ReceiveTimeout = 30000;
stream = client.GetStream();
}
catch (Exception e)
{
Logger.Instance.WriteToLog("Failed to establish HL7 MLLP listener with Powerscribe at location " + ip + ":" + port + ", underlying error message is: " + e.ToString());
}
// Extract the outbound message from the html document...
str = extractHL7(dt, hl7SegmentList); // enter the segmentList in lkpInterfaceDefinitions.stringParam1 if you don't want to use the default segment list
if (stream == null)
{
Logger.Instance.WriteToLog("No HL7 MLLP connection with Powerscribe at location " + ip + ":" + port + ".");
return false;
}
// Transmit the HL7 message, and await the response.
try
{
MLLP mllp = new MLLP(stream, false);
mllp.Send(str);
hl7Response = mllp.Receive();
returnValue = true; // got a response...
Logger.Instance.WriteToLog("MLLP Message Received: " + hl7Response);
}
catch (Exception e)
{
// TODO: Do something, you know, retry perhaps?
Logger.Instance.WriteToLog("Failed to send ORU to Powerscribe. HL7 message is: " + str + ", underlying error message is: " + e.ToString());
}
finally
{
stream.Close();
}
return returnValue;
}
else
{
Logger.Instance.WriteToLog("Failed to send ORU to Powerscribe. Currently configured is interface id " + interfaceId + ", port " + port + ", IP " + ip + ", and segment list " + hl7SegmentList + ". Relevant tables are lkpAutomationDocuments, lkpInterfaceDefinitions, and lkpDocumentTemplates. ");
}
return false;
}
private string CreateHtmlDocument(string htmlPath,string mrn,int apptId)
{
Logger.Debug("CreateHtmlDocument: Start");
//set active patient
DocumentTemplate dt = new DocumentTemplate();
SessionManager.Instance.SetActivePatient(mrn, apptId);
dt.SetPatient(SessionManager.Instance.GetActivePatient());
// string htmlPath = HttpContext.Current.Server.MapPath(Path.Combine(Constants.RAFilePath, "Temp", "SurveySummary.html"));
dt.htmlPath = htmlPath;
StringBuilder sb = new StringBuilder();
using (StreamReader sr = new StreamReader(htmlPath))
{
String line;
while ((line = sr.ReadLine()) != null)
{
sb.AppendLine(line);
}
}
string html = sb.ToString();
dt.htmlText = html;
dt.ProcessDocument();
string newhtml = dt.htmlText;
Logger.Debug("CreateHtmlDocument: End");
return newhtml;
}