/// <summary>
/// Verifies a PolylineCurve is a rectangle
/// </summary>
public static bool IsRectangle(PolylineCurve curve)
{
// Curve should be a valid, closed, planar polyline curve with 5 points
if (curve == null || !curve.IsValid || !curve.IsClosed || !curve.IsPlanar() || curve.PointCount != 5)
return false;
// Angle between each segment should be 90 degrees
const double angle = 90.0 * (Math.PI / 180.0);
for (var i = 1; i < curve.PointCount - 1; i++)
{
var p0 = curve.Point(i - 1);
var p1 = curve.Point(i);
var p2 = curve.Point(i + 1);
var v0 = p1 - p0;
v0.Unitize();
var v1 = p1 - p2;
v1.Unitize();
var a = Vector3d.VectorAngle(v0, v1);
if (Math.Abs(angle - a) >= RhinoMath.DefaultAngleTolerance)
return false;
}
return true;
}
bool IGH_TypeHint.Cast(object data, out object target)
{
bool toReturn = base.Cast(data, out target);
if (toReturn && target != null)
{
Type t = target.GetType();
if (t == typeof(Line))
target = new LineCurve((Line)target);
else if (t == typeof(Arc))
target = new ArcCurve((Arc)target);
else if (t == typeof(Circle))
target = new ArcCurve((Circle)target);
else if (t == typeof(Ellipse))
target = ((Ellipse)target).ToNurbsCurve();
else if (t == typeof(Box))
target = Brep.CreateFromBox((Box)target);
else if (t == typeof(BoundingBox))
target = Brep.CreateFromBox((BoundingBox)target);
else if (t == typeof(Rectangle3d))
target = ((Rectangle3d)target).ToNurbsCurve();
else if (target is Polyline)
target = new PolylineCurve((Polyline)target);
}
return toReturn;
}
public SilkwormSegment(Curve curve, int mainSegmentCount, int subSegmentCount, double maxAngleRadians, double maxChordLengthRatio, double maxAspectRatio, double tolerance, double minEdgeLength, double maxEdgeLength, bool keepStartPoint)
{
if (curve != null)
{
//See if curve can be represented as a polyline already
if (curve.TryGetPolyline(out Pline))
{
PolylineCurve plinecurve = new PolylineCurve(Pline);
//Segments = plinecurve.DuplicateSegments().ToList();
Segments = DuplicateSegments(plinecurve);
}
//Try to see if conversion will work
if (curve.ToPolyline(mainSegmentCount, subSegmentCount, maxAngleRadians, maxChordLengthRatio, maxAspectRatio, tolerance, minEdgeLength, maxEdgeLength, keepStartPoint) != null)
{
//Convert
PolylineCurve plinec = curve.ToPolyline(mainSegmentCount, subSegmentCount, maxAngleRadians, maxChordLengthRatio, maxAspectRatio, tolerance, minEdgeLength, maxEdgeLength, keepStartPoint);
if (plinec.TryGetPolyline(out Pline))
{
PolylineCurve plinecurve = new PolylineCurve(Pline);
//Segments = plinecurve.DuplicateSegments().ToList();
Segments = DuplicateSegments(plinecurve);
}
}
}
}
public SilkwormSegment(Curve curve)
{
if (curve != null)
{
//See if curve can be represented as a polyline already
if (curve.TryGetPolyline(out Pline))
{
PolylineCurve plinecurve = new PolylineCurve(Pline);
//Segments = plinecurve.DuplicateSegments().ToList();
Segments = DuplicateSegments(plinecurve);
}
//Try to see if conversion will work
if (curve.ToPolyline(0, 0, 0.05, 0.1, 0, 0, 0.1, 0, true) != null)
{
//Convert
PolylineCurve plinec = curve.ToPolyline(0, 0, 0.05, 0.1, 0, 0, 0.1, 0, true);
if (plinec.TryGetPolyline(out Pline))
{
PolylineCurve plinecurve = new PolylineCurve(Pline);
//Segments = plinecurve.DuplicateSegments().ToList();
Segments = DuplicateSegments(plinecurve);
}
}
}
}
bool IGH_TypeHint.Cast(object data, out object target)
{
bool toReturn = base.Cast(data, out target);
if (m_component.DocStorageMode == DocReplacement.DocStorage.AutomaticMarshal && target != null)
{
Type t = target.GetType();
if (t == typeof (Line))
target = new LineCurve((Line) target);
else if (t == typeof (Arc))
target = new ArcCurve((Arc) target);
else if (t == typeof (Circle))
target = new ArcCurve((Circle) target);
else if (t == typeof (Ellipse))
target = ((Ellipse) target).ToNurbsCurve();
else if (t == typeof (Box))
target = Brep.CreateFromBox((Box) target);
else if (t == typeof (BoundingBox))
target = Brep.CreateFromBox((BoundingBox) target);
else if (t == typeof (Rectangle3d))
target = ((Rectangle3d) target).ToNurbsCurve();
else if (t == typeof (Polyline))
target = new PolylineCurve((Polyline) target);
}
return toReturn;
}
/// <summary>
/// Verifies a Polyline is a rectangle
/// </summary>
public static bool IsRectangle(Polyline polyline)
{
if (polyline == null)
return false;
var curve = new PolylineCurve(polyline);
return curve.IsValid && IsRectangle(curve);
}
/// <summary>
/// Initializes a new polyline curve by copying its content from another polyline curve.
/// </summary>
/// <param name="other">Another polyline curve.</param>
public PolylineCurve(PolylineCurve other)
{
IntPtr pOther= IntPtr.Zero;
if (null != other)
pOther = other.ConstPointer();
IntPtr ptr = UnsafeNativeMethods.ON_PolylineCurve_New(pOther);
ConstructNonConstObject(ptr);
}
/***************************************************/
public static void RenderRhinoWires(RHG.PolylineCurve polyline, Rhino.Display.DisplayPipeline pipeline, Color bhColour, int thickness)
{
RHG.Polyline poly;
if (polyline.TryGetPolyline(out poly))
{
pipeline.DrawPolyline(poly, bhColour, thickness);
}
}
/***************************************************/
public static bool IsEqual(this BHG.Polyline bhPolyline, RHG.PolylineCurve rhPolylineCurve, double tolerance = BHG.Tolerance.Distance)
{
if (bhPolyline == null & rhPolylineCurve == null)
{
return(true);
}
RHG.Polyline rhPolyline; rhPolylineCurve.TryGetPolyline(out rhPolyline);
return(bhPolyline.IsEqual(rhPolyline, tolerance));
}
/***************************************************/
public static BHG.Polyline FromRhino(this RHG.PolylineCurve polyline)
{
if (polyline == null)
{
return(null);
}
if (!polyline.IsPolyline())
{
return(null);
}
RHG.Polyline rPolyline; polyline.TryGetPolyline(out rPolyline);
return(rPolyline.FromRhino());
}
public override void InitializeAgent()
{
// layoutAcademy = GameObject.FindObjectOfType<Academy>().GetComponent<LayoutAcademy>();
layoutArea = transform.parent.GetComponent <LayoutArea>();
//transform.position = layoutAcademy.agentPosition[agentNumber];
transform.position = layoutArea.agentPosition[agentNumber];
//gridSize = layoutAcademy.gridSize;
gridSize = layoutArea.gridSize;
x_Ex = layoutArea.x_Ex;
y_Ex = layoutArea.y_Ex;
shape = layoutArea.shape;
offsetShape = layoutArea.offsetShape;
}
bool IGH_TypeHint.Cast(object data, out object target)
{
bool toReturn = base.Cast(data, out target);
if (toReturn &&
_component.DocStorageMode == DocReplacement.DocStorage.AutomaticMarshal &&
target != null)
{
Type t = target.GetType();
if (t == typeof (Polyline))
target = new PolylineCurve((Polyline) target);
}
return toReturn;
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
List <RG.Point3d> pts = new List <RG.Point3d> {
new RG.Point3d(0, 0, 0), new RG.Point3d(5, 10, 0), new RG.Point3d(15, 0, 0), new RG.Point3d(20, 0, 0)
};
RG.PolylineCurve pc = new RG.PolylineCurve(pts);
RG.NurbsCurve nurb = pc.ToNurbsCurve();
nurb.IncreaseDegree(3);
var knots = ToDoubleArray(nurb.Knots, nurb.Degree);
var controlPoints = ToXYZArray(nurb.Points, 1);
var weights = nurb.Points.ConvertAll(x => x.Weight);
XYZ normal = new XYZ(0, 0, 1);
XYZ origin = new XYZ(0, 0, 0);
Plane rvtPlane = Plane.CreateByNormalAndOrigin(normal, origin);
//var plane = sketchPlane.GetPlane().ToPlane();
Curve rvtN = NurbSpline.CreateCurve(nurb.Degree, knots, controlPoints);
using (Transaction t = new Transaction(doc, "a"))
{
t.Start();
SketchPlane sketchPlane = SketchPlane.Create(doc, rvtPlane);
ModelCurve mc = doc.Create.NewModelCurve(rvtN, sketchPlane);
TaskDialog.Show("r", mc.Id.ToString());
t.Commit();
}
return(Result.Succeeded);
}
/// <summary>
/// Creates grips
/// </summary>
public bool CreateGrips(PolylineCurve polylineCurve)
{
if (!SampleCsRectangleHelper.IsRectangle(polylineCurve))
return false;
if (GripCount > 0)
return false;
Plane plane;
if (!polylineCurve.TryGetPlane(out plane))
return false;
m_plane = plane;
m_active_rectangle = new Point3d[5];
for (var i = 0; i < polylineCurve.PointCount; i++)
m_active_rectangle[i] = polylineCurve.Point(i);
m_original_rectangle = new Point3d[5];
Array.Copy(m_active_rectangle, m_original_rectangle, 5);
var line = new Line();
for (var i = 0; i < 4; i++)
{
var gi = 2 * i;
line.From = m_active_rectangle[i];
line.To = m_active_rectangle[i + 1];
m_sample_cs_rectangle_grips[gi].OriginalLocation = line.From;
m_sample_cs_rectangle_grips[gi + 1].OriginalLocation = 0.5 * line.From + 0.5 * line.To;
m_sample_cs_rectangle_grips[gi].Active = true;
m_sample_cs_rectangle_grips[gi + 1].Active = true;
}
for (var i = 0; i < 8; i++)
AddGrip(m_sample_cs_rectangle_grips[i]);
return true;
}
private float[] GetFourAxis(Rhino.Geometry.Point3d agentPt, Rhino.Geometry.PolylineCurve shapeCrv)
{
hitsPoints.Clear();
wall[0] = Rhino.Geometry.Surface.CreateExtrusion(shapeCrv, Rhino.Geometry.Vector3d.ZAxis) as Rhino.Geometry.GeometryBase;
ray = new Rhino.Geometry.Ray3d(agentPt, Rhino.Geometry.Vector3d.XAxis);
hits = Rhino.Geometry.Intersect.Intersection.RayShoot(ray, wall, 1);
hitsPoints.AddRange(hits);
ray = new Rhino.Geometry.Ray3d(agentPt, Rhino.Geometry.Vector3d.YAxis);
hits = Rhino.Geometry.Intersect.Intersection.RayShoot(ray, wall, 1);
hitsPoints.AddRange(hits);
ray = new Rhino.Geometry.Ray3d(agentPt, Rhino.Geometry.Vector3d.XAxis * -1);
hits = Rhino.Geometry.Intersect.Intersection.RayShoot(ray, wall, 1);
hitsPoints.AddRange(hits);
ray = new Rhino.Geometry.Ray3d(agentPt, Rhino.Geometry.Vector3d.YAxis * -1);
hits = Rhino.Geometry.Intersect.Intersection.RayShoot(ray, wall, 1);
hitsPoints.AddRange(hits);
for (int i = 0; i < hitsPoints.Count; i++)
{
var dir = hitsPoints[i] - agentPt;
Vector2 hitVec = new Vector2((float)dir.X / (float)(gridSize * x_Ex), (float)dir.Y / (float)(gridSize * y_Ex));
if (hitVec.x != 0)
{
rtnValues[i] = Mathf.Abs(hitVec.x);
}
if (hitVec.y != 0)
{
rtnValues[i] = Mathf.Abs(hitVec.y);
}
}
return(rtnValues);
}
//HATCH FILL REGION - infills a planar region with a hatching pattern
public void Filler(List<double> infDens, List<double> infRot)
{
double tolerance = 0.001;
//double overlaptol = 0.0;
double crossSecHyp = Math.Sqrt(Math.Pow(crossSec, 2) * 2);
curveInfill = new List<Curve>[planarBreps.Count];
//Create List of Infill Curves for each Planar Region
for (int u = 0; u < planarBreps.Count; u++)
{
//Rotate Plane for Filling
double rotationRad = infRot[u] * 0.0174532925;
Plane plane = Plane.WorldXY;
plane.Rotate(rotationRad, Plane.WorldXY.ZAxis);
//Create Bounding Box
Box bbox = new Box();
planarBreps[u].GetBoundingBox(plane, out bbox);
//Get Corners
Point3d[] cornerPts = bbox.GetCorners();
//Draw Parallel Lines
LineCurve baseLine = new LineCurve(cornerPts[0], cornerPts[1]);
LineCurve baseLine2 = new LineCurve(cornerPts[3], cornerPts[2]);
//int nPts = (int)Math.Round((baseLine.Line.Length/crossSec),0);
Point3d[] basePts = new Point3d[0];
Point3d[] basePts2 = new Point3d[0];
double length = baseLine.Line.Length;
double floatdivisions = length / crossSec;
double density = infDens[u];
int divisions = (int)Math.Round((floatdivisions * density));
//Divide Lines by Fill Density ratio
baseLine.DivideByCount(divisions, true, out basePts);
baseLine2.DivideByCount(divisions, true, out basePts2);
if (divisions == 0)
{
curveInfill[u] = new List<Curve>();
return;
}
Curve[][] intCurve = new Curve[basePts.Length][];
List<Curve> intCurves = new List<Curve>();
for (int i = 0; i < basePts.Length; i++)
{
LineCurve intLine = new LineCurve(basePts[i], basePts2[i]);
Point3d[] intPts = new Point3d[0];
BrepFace r_Infill = planarBreps[u].Faces[0];
Curve[] int_Curve = new Curve[0];
//Intersect Curves with Regions
Intersection.CurveBrepFace(intLine, r_Infill, tolerance, out int_Curve, out intPts);
intCurve[i] = int_Curve;
//Convert resulting Curves into LineCurves
for (int j = 0; j < int_Curve.Length; j++)
{
LineCurve line = new LineCurve(int_Curve[j].PointAtStart, int_Curve[j].PointAtEnd);
intCurve[i][j] = line;
//intCurves[j].Add(int_Curve[j]);
intCurves.Add(line);
}
}
//Rotate Array
List<Curve>[] int_Curves = RotatetoListArray(intCurve);
List<Curve> joinLines = new List<Curve>();
List<Curve> p_lines = new List<Curve>();
for (int l = 0; l < int_Curves.Length; l++)
{
for (int k = 1; k < int_Curves[l].Count; k += 2)
{
int_Curves[l][k].Reverse();
}
}
//Create a list of points for all connected lines in the infill. Do this for each seperate string of segments
for (int l = 0; l < int_Curves.Length; l++)
{
List<Point3d> plinePts = new List<Point3d>();
if (int_Curves[l].Count > 0)
{
plinePts.Add(int_Curves[l][0].PointAtStart);
for (int k = 1; k < int_Curves[l].Count; k++)
{
plinePts.Add(int_Curves[l][k - 1].PointAtEnd);
plinePts.Add(int_Curves[l][k].PointAtStart);
plinePts.Add(int_Curves[l][k].PointAtEnd);
}
PolylineCurve plCurve = new PolylineCurve(plinePts);
Curve curve = plCurve.ToNurbsCurve();
p_lines.Add(curve);
}
}
List<Curve> curve_s = p_lines;
curveInfill[u] = p_lines;
}
}
public List<Curve> DuplicateSegments(PolylineCurve plinecurve)
{
List<Curve> lines = new List<Curve>(); ;
for (int i = 1; i < plinecurve.PointCount; i++)
{
Point3d PtA = plinecurve.Point(i - 1);
Point3d PtB = plinecurve.Point(i);
lines.Add(new LineCurve(PtA, PtB));
}
return lines;
}
static internal IEnumerable <Rhino.Geometry.GeometryBase> ToRhino(this IEnumerable <Autodesk.Revit.DB.GeometryObject> geometries)
{
var scaleFactor = Revit.ModelUnits;
foreach (var geometry in geometries)
{
switch (geometry)
{
case Autodesk.Revit.DB.GeometryInstance instance:
foreach (var g in instance.GetInstanceGeometry().ToRhino())
{
yield return(g);
}
break;
case Autodesk.Revit.DB.Mesh mesh:
var m = mesh.ToRhino();
m.Faces.ConvertTrianglesToQuads(Revit.AngleTolerance, 0.0);
if (scaleFactor != 1.0)
{
m?.Scale(scaleFactor);
}
yield return(m);
break;
case Autodesk.Revit.DB.Solid solid:
var s = solid.ToRhino();
if (scaleFactor != 1.0)
{
s?.Scale(scaleFactor);
}
yield return(s);
break;
case Autodesk.Revit.DB.Curve curve:
var c = curve.ToRhino();
if (scaleFactor != 1.0)
{
c?.Scale(scaleFactor);
}
yield return(c);
break;
case Autodesk.Revit.DB.PolyLine polyline:
var p = new Rhino.Geometry.PolylineCurve(polyline.GetCoordinates().ToRhino());
if (scaleFactor != 1.0)
{
p?.Scale(scaleFactor);
}
yield return(p);
break;
}
}
}
static internal IEnumerable <Rhino.Geometry.Curve> GetPreviewWires(this IEnumerable <Autodesk.Revit.DB.GeometryObject> geometries)
{
var scaleFactor = Revit.ModelUnits;
foreach (var geometry in geometries)
{
var gs = Revit.ActiveDBDocument.GetElement(geometry.GraphicsStyleId) as GraphicsStyle;
if (geometry.Visibility != Visibility.Visible)
{
continue;
}
switch (geometry)
{
case Autodesk.Revit.DB.GeometryInstance instance:
foreach (var g in instance.GetInstanceGeometry().GetPreviewWires())
{
yield return(g);
}
break;
case Autodesk.Revit.DB.Solid solid:
if (solid.Faces.IsEmpty)
{
continue;
}
foreach (var edge in solid.Edges.OfType <Edge>())
{
var s = edge.AsCurve().ToRhino();
if (scaleFactor != 1.0)
{
s?.Scale(scaleFactor);
}
yield return(s);
}
break;
case Autodesk.Revit.DB.Curve curve:
var c = curve.ToRhino();
if (scaleFactor != 1.0)
{
c?.Scale(scaleFactor);
}
yield return(c);
break;
case Autodesk.Revit.DB.PolyLine polyline:
if (polyline.NumberOfCoordinates <= 0)
{
continue;
}
var p = new Rhino.Geometry.PolylineCurve(polyline.GetCoordinates().ToRhino());
if (scaleFactor != 1.0)
{
p?.Scale(scaleFactor);
}
yield return(p);
break;
}
}
}
internal static GeometryBase CreateGeometryHelper(IntPtr pGeometry, object parent, int subobject_index)
{
if (IntPtr.Zero == pGeometry)
return null;
int type = UnsafeNativeMethods.ON_Geometry_GetGeometryType(pGeometry);
if (type < 0)
return null;
GeometryBase rc = null;
switch (type)
{
case idxON_Curve: //1
rc = new Curve(pGeometry, parent, subobject_index);
break;
case idxON_NurbsCurve: //2
rc = new NurbsCurve(pGeometry, parent, subobject_index);
break;
case idxON_PolyCurve: // 3
rc = new PolyCurve(pGeometry, parent, subobject_index);
break;
case idxON_PolylineCurve: //4
rc = new PolylineCurve(pGeometry, parent, subobject_index);
break;
case idxON_ArcCurve: //5
rc = new ArcCurve(pGeometry, parent, subobject_index);
break;
case idxON_LineCurve: //6
rc = new LineCurve(pGeometry, parent, subobject_index);
break;
case idxON_Mesh: //7
rc = new Mesh(pGeometry, parent);
break;
case idxON_Point: //8
rc = new Point(pGeometry, parent);
break;
case idxON_TextDot: //9
rc = new TextDot(pGeometry, parent);
break;
case idxON_Surface: //10
rc = new Surface(pGeometry, parent);
break;
case idxON_Brep: //11
rc = new Brep(pGeometry, parent);
break;
case idxON_NurbsSurface: //12
rc = new NurbsSurface(pGeometry, parent);
break;
case idxON_RevSurface: //13
rc = new RevSurface(pGeometry, parent);
break;
case idxON_PlaneSurface: //14
rc = new PlaneSurface(pGeometry, parent);
break;
case idxON_ClippingPlaneSurface: //15
rc = new ClippingPlaneSurface(pGeometry, parent);
break;
case idxON_Annotation2: // 16
rc = new AnnotationBase(pGeometry, parent);
break;
case idxON_Hatch: // 17
rc = new Hatch(pGeometry, parent);
break;
case idxON_TextEntity2: //18
rc = new TextEntity(pGeometry, parent);
break;
case idxON_SumSurface: //19
rc = new SumSurface(pGeometry, parent);
break;
case idxON_BrepFace: //20
{
int faceindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref faceindex);
if (pBrep != IntPtr.Zero && faceindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Faces[faceindex];
}
}
break;
case idxON_BrepEdge: // 21
{
int edgeindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref edgeindex);
if (pBrep != IntPtr.Zero && edgeindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Edges[edgeindex];
}
}
break;
case idxON_InstanceDefinition: // 22
rc = new InstanceDefinitionGeometry(pGeometry, parent);
break;
case idxON_InstanceReference: // 23
rc = new InstanceReferenceGeometry(pGeometry, parent);
break;
#if USING_V5_SDK
case idxON_Extrusion: //24
rc = new Extrusion(pGeometry, parent);
break;
#endif
case idxON_LinearDimension2: //25
rc = new LinearDimension(pGeometry, parent);
break;
case idxON_PointCloud: // 26
rc = new PointCloud(pGeometry, parent);
break;
case idxON_DetailView: // 27
rc = new DetailView(pGeometry, parent);
break;
case idxON_AngularDimension2: // 28
rc = new AngularDimension(pGeometry, parent);
break;
case idxON_RadialDimension2: // 29
rc = new RadialDimension(pGeometry, parent);
break;
case idxON_Leader: // 30
rc = new Leader(pGeometry, parent);
break;
case idxON_OrdinateDimension2: // 31
rc = new OrdinateDimension(pGeometry, parent);
break;
case idxON_Light: //32
rc = new Light(pGeometry, parent);
break;
case idxON_PointGrid: //33
rc = new Point3dGrid(pGeometry, parent);
break;
case idxON_MorphControl: //34
rc = new MorphControl(pGeometry, parent);
break;
case idxON_BrepLoop: //35
{
int loopindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref loopindex);
if (pBrep != IntPtr.Zero && loopindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Loops[loopindex];
}
}
break;
case idxON_BrepTrim: // 36
{
int trimindex = -1;
IntPtr pBrep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref trimindex);
if (pBrep != IntPtr.Zero && trimindex >= 0)
{
Brep b = new Brep(pBrep, parent);
rc = b.Trims[trimindex];
}
}
break;
default:
rc = new UnknownGeometry(pGeometry, parent, subobject_index);
break;
}
return rc;
}
DataTree<Curve> GetContourTree(Mesh mesh, List<double> contourZList)
{
DataTree<Curve> contourTree = new DataTree<Curve>();
int i = 0;
foreach (double z in contourZList)
{
Polyline[] contour = Rhino.Geometry.Intersect.Intersection.MeshPlane(mesh, new Plane(new Point3d(0, 0, z), new Vector3d(0, 0, 1)));
foreach (Polyline contourItem in contour)
{
PolylineCurve pCurve = new PolylineCurve(contourItem);
contourTree.Add(pCurve, new GH_Path(0, i));
}
i++;
}
return contourTree;
}
internal static GeometryBase CreateGeometryHelper(IntPtr pGeometry, object parent, int subobjectIndex)
{
if (IntPtr.Zero == pGeometry)
{
return(null);
}
var type = UnsafeNativeMethods.ON_Geometry_GetGeometryType(pGeometry);
if (type < 0)
{
return(null);
}
GeometryBase rc = null;
switch (type)
{
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Curve: //1
rc = new Curve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_NurbsCurve: //2
rc = new NurbsCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PolyCurve: // 3
rc = new PolyCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PolylineCurve: //4
rc = new PolylineCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_ArcCurve: //5
rc = new ArcCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_LineCurve: //6
rc = new LineCurve(pGeometry, parent, subobjectIndex);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Mesh: //7
rc = new Mesh(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Point: //8
rc = new Point(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_TextDot: //9
rc = new TextDot(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Surface: //10
rc = new Surface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Brep: //11
rc = new Brep(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_NurbsSurface: //12
rc = new NurbsSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_RevSurface: //13
rc = new RevSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PlaneSurface: //14
rc = new PlaneSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_ClippingPlaneSurface: //15
rc = new ClippingPlaneSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Hatch: // 17
rc = new Hatch(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_SumSurface: //19
rc = new SumSurface(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepFace: //20
{
int faceindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref faceindex);
if (ptr_brep != IntPtr.Zero && faceindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Faces[faceindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepEdge: // 21
{
int edgeindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref edgeindex);
if (ptr_brep != IntPtr.Zero && edgeindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Edges[edgeindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_InstanceReference: // 23
rc = new InstanceReferenceGeometry(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Extrusion: //24
rc = new Extrusion(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PointCloud: // 26
rc = new PointCloud(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DetailView: // 27
rc = new DetailView(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Light: //32
rc = new Light(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_PointGrid: //33
rc = new Point3dGrid(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_MorphControl: //34
rc = new MorphControl(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepLoop: //35
{
int loopindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref loopindex);
if (ptr_brep != IntPtr.Zero && loopindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Loops[loopindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_BrepTrim: // 36
{
int trimindex = -1;
IntPtr ptr_brep = UnsafeNativeMethods.ON_BrepSubItem_Brep(pGeometry, ref trimindex);
if (ptr_brep != IntPtr.Zero && trimindex >= 0)
{
Brep b = new Brep(ptr_brep, parent);
rc = b.Trims[trimindex];
}
}
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Leader: // 38
rc = new Leader(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_SubD: // 39
rc = new SubD(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimLinear: //40
rc = new LinearDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimAngular: //41
rc = new AngularDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimRadial: //42
rc = new RadialDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_DimOrdinate: //43
rc = new OrdinateDimension(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Centermark: //44
rc = new Centermark(pGeometry, parent);
break;
case UnsafeNativeMethods.OnGeometryTypeConsts.ON_Text: //45
rc = new TextEntity(pGeometry, parent);
break;
default:
rc = new UnknownGeometry(pGeometry, parent, subobjectIndex);
break;
}
return(rc);
}
public void SetInputs(List <DataTree <ResthopperObject> > values)
{
foreach (var tree in values)
{
if (!_input.TryGetValue(tree.ParamName, out var inputGroup))
{
continue;
}
if (inputGroup.AlreadySet(tree))
{
LogDebug("Skipping input tree... same input");
continue;
}
inputGroup.CacheTree(tree);
IGH_ContextualParameter contextualParameter = inputGroup.Param as IGH_ContextualParameter;
if (contextualParameter != null)
{
switch (ParamTypeName(inputGroup.Param))
{
case "Number":
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
double[] doubles = new double[entree.Value.Count];
for (int i = 0; i < doubles.Length; i++)
{
ResthopperObject restobj = entree.Value[i];
doubles[i] = JsonConvert.DeserializeObject <double>(restobj.Data);
}
contextualParameter.AssignContextualData(doubles);
break;
}
}
break;
case "Integer":
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
int[] integers = new int[entree.Value.Count];
for (int i = 0; i < integers.Length; i++)
{
ResthopperObject restobj = entree.Value[i];
integers[i] = JsonConvert.DeserializeObject <int>(restobj.Data);
}
contextualParameter.AssignContextualData(integers);
break;
}
}
break;
case "Point":
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
Point3d[] points = new Point3d[entree.Value.Count];
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
points[i] = JsonConvert.DeserializeObject <Rhino.Geometry.Point3d>(restobj.Data);
}
contextualParameter.AssignContextualData(points);
break;
}
}
break;
case "Line":
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
Line[] lines = new Line[entree.Value.Count];
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
lines[i] = JsonConvert.DeserializeObject <Rhino.Geometry.Line>(restobj.Data);
}
contextualParameter.AssignContextualData(lines);
break;
}
}
break;
case "Text":
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
string[] strings = new string[entree.Value.Count];
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
strings[i] = restobj.Data.Trim(new char[] { '"' });
}
contextualParameter.AssignContextualData(strings);
break;
}
}
break;
case "Geometry":
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GeometryBase[] geometries = new GeometryBase[entree.Value.Count];
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
var dict = JsonConvert.DeserializeObject <Dictionary <string, string> >(restobj.Data);
geometries[i] = Rhino.Runtime.CommonObject.FromJSON(dict) as GeometryBase;
}
contextualParameter.AssignContextualData(geometries);
break;
}
}
break;
}
continue;
}
inputGroup.Param.VolatileData.Clear();
inputGroup.Param.ExpireSolution(false); // mark param as expired but don't recompute just yet!
if (inputGroup.Param is Param_Point)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Point3d rPt = JsonConvert.DeserializeObject <Rhino.Geometry.Point3d>(restobj.Data);
GH_Point data = new GH_Point(rPt);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Vector)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Vector3d rhVector = JsonConvert.DeserializeObject <Rhino.Geometry.Vector3d>(restobj.Data);
GH_Vector data = new GH_Vector(rhVector);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Integer)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
int rhinoInt = JsonConvert.DeserializeObject <int>(restobj.Data);
GH_Integer data = new GH_Integer(rhinoInt);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Number)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
double rhNumber = JsonConvert.DeserializeObject <double>(restobj.Data);
GH_Number data = new GH_Number(rhNumber);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_String)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
string rhString = restobj.Data;
GH_String data = new GH_String(rhString);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Line)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Line rhLine = JsonConvert.DeserializeObject <Rhino.Geometry.Line>(restobj.Data);
GH_Line data = new GH_Line(rhLine);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Curve)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
GH_Curve ghCurve;
try
{
Rhino.Geometry.Polyline data = JsonConvert.DeserializeObject <Rhino.Geometry.Polyline>(restobj.Data);
Rhino.Geometry.Curve c = new Rhino.Geometry.PolylineCurve(data);
ghCurve = new GH_Curve(c);
}
catch
{
var dict = JsonConvert.DeserializeObject <Dictionary <string, string> >(restobj.Data);
var c = (Rhino.Geometry.Curve)Rhino.Runtime.CommonObject.FromJSON(dict);
ghCurve = new GH_Curve(c);
}
inputGroup.Param.AddVolatileData(path, i, ghCurve);
}
}
continue;
}
if (inputGroup.Param is Param_Circle)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Circle rhCircle = JsonConvert.DeserializeObject <Rhino.Geometry.Circle>(restobj.Data);
GH_Circle data = new GH_Circle(rhCircle);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Plane)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Plane rhPlane = JsonConvert.DeserializeObject <Rhino.Geometry.Plane>(restobj.Data);
GH_Plane data = new GH_Plane(rhPlane);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Rectangle)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Rectangle3d rhRectangle = JsonConvert.DeserializeObject <Rhino.Geometry.Rectangle3d>(restobj.Data);
GH_Rectangle data = new GH_Rectangle(rhRectangle);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Box)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Box rhBox = JsonConvert.DeserializeObject <Rhino.Geometry.Box>(restobj.Data);
GH_Box data = new GH_Box(rhBox);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Surface)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Surface rhSurface = JsonConvert.DeserializeObject <Rhino.Geometry.Surface>(restobj.Data);
GH_Surface data = new GH_Surface(rhSurface);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Brep)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Brep rhBrep = JsonConvert.DeserializeObject <Rhino.Geometry.Brep>(restobj.Data);
GH_Brep data = new GH_Brep(rhBrep);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Mesh)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Mesh rhMesh = JsonConvert.DeserializeObject <Rhino.Geometry.Mesh>(restobj.Data);
GH_Mesh data = new GH_Mesh(rhMesh);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is GH_NumberSlider)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
double rhNumber = JsonConvert.DeserializeObject <double>(restobj.Data);
GH_Number data = new GH_Number(rhNumber);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Boolean || inputGroup.Param is GH_BooleanToggle)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
bool boolean = JsonConvert.DeserializeObject <bool>(restobj.Data);
GH_Boolean data = new GH_Boolean(boolean);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is GH_Panel)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
string rhString = JsonConvert.DeserializeObject <string>(restobj.Data);
GH_String data = new GH_String(rhString);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
}
}
/// <summary>
/// Verifies a set of points is a rectangle
/// </summary>
public static bool IsRectangle(IEnumerable<Point3d> points)
{
var curve = new PolylineCurve(points);
return curve.IsValid && IsRectangle(curve);
}
private Brep[] GetBorderWalls(Curve borderCrv, IEnumerable<Point3d> pts, IEnumerable<Vector3d> nrmls, double dist)
{
List<Point3d> ptsOut = new List<Point3d>();
List<Point3d> ptsIn = new List<Point3d>();
IEnumerator ptEnum = pts.GetEnumerator();
IEnumerator nrmlEnum = nrmls.GetEnumerator();
while ((ptEnum.MoveNext()) && (nrmlEnum.MoveNext()))
{
Point3d pt = (Point3d)ptEnum.Current;
Vector3d nrml = (Vector3d)nrmlEnum.Current;
Transform mvOut = Transform.Translation(nrml * dist);
Transform mvIn = Transform.Translation(nrml * -dist);
Point3d ptOut = new Point3d(pt);
Point3d ptIn = new Point3d(pt);
ptOut.Transform(mvOut);
ptIn.Transform(mvIn);
ptsOut.Add(ptOut);
ptsIn.Add(ptIn);
}
Curve crvOut;
Curve crvIn;
if (borderCrv.IsPolyline())
{
crvOut = new PolylineCurve(ptsOut);
crvIn = new PolylineCurve(ptsIn);
}
else
{
crvOut = Curve.CreateInterpolatedCurve(ptsOut, 3);
crvIn = Curve.CreateInterpolatedCurve(ptsIn, 3);
}
List<Curve> crvs = new List<Curve>();
crvs.Add(crvOut);
crvs.Add(crvIn);
Brep[] lofts = Brep.CreateFromLoft(crvs, Point3d.Unset, Point3d.Unset, LoftType.Normal, false);
Interval interval = new Interval(0, 1);
double u, v;
u = v = 0.05;
BrepFace loftFace = lofts[0].Faces[0];
loftFace.SetDomain(0, interval);
loftFace.SetDomain(1, interval);
while (u < 1 && v < 1)
{
if (loftFace.IsPointOnFace(u, v).Equals(PointFaceRelation.Interior))
{
break;
}
u += .05;
v += .05;
}
Point3d loftPt = loftFace.PointAt(u, v);
Vector3d loftNrml = loftFace.NormalAt(u, v);
Point3d loftPtOut = loftPt;
Point3d loftPtIn = loftPt;
loftPtOut.Transform(Transform.Translation(loftNrml));
loftNrml.Reverse();
loftPtIn.Transform(Transform.Translation(loftNrml));
Point3d envPtOut = environment.ClosestPoint(loftPtOut);
Point3d envPtIn = environment.ClosestPoint(loftPtIn);
if (loftPtOut.DistanceTo(envPtOut) < loftPtIn.DistanceTo(envPtIn))
{
foreach (Brep brep in lofts)
{
brep.Flip();
}
}
return lofts;
}
public static Response Grasshopper(NancyContext ctx)
{
// load grasshopper file
var archive = new GH_Archive();
// TODO: stream to string
var body = ctx.Request.Body.ToString();
string json = string.Empty;
using (var reader = new StreamReader(ctx.Request.Body))
{
json = reader.ReadToEnd();
}
//GrasshopperInput input = Newtonsoft.Json.JsonConvert.DeserializeObject<GrasshopperInput>(json);
//JsonSerializerSettings settings = new JsonSerializerSettings();
//settings.ContractResolver = new DictionaryAsArrayResolver();
Schema input = JsonConvert.DeserializeObject <Schema>(json);
string grasshopperXml = string.Empty;
if (input.Algo != null)
{
// If request contains markup
byte[] byteArray = Convert.FromBase64String(input.Algo);
grasshopperXml = System.Text.Encoding.UTF8.GetString(byteArray);
}
else
{
// If request contains pointer
string pointer = input.Pointer;
grasshopperXml = GetGhxFromPointer(pointer);
}
if (!archive.Deserialize_Xml(grasshopperXml))
{
throw new Exception();
}
var definition = new GH_Document();
if (!archive.ExtractObject(definition, "Definition"))
{
throw new Exception();
}
// Set input params
foreach (var obj in definition.Objects)
{
var group = obj as GH_Group;
if (group == null)
{
continue;
}
if (group.NickName.Contains("RH_IN"))
{
// It is a RestHopper input group!
GHTypeCodes code = (GHTypeCodes)Int32.Parse(group.NickName.Split(':')[1]);
var param = group.Objects()[0];
//GH_Param<IGH_Goo> goo = obj as GH_Param<IGH_Goo>;
// SetData
foreach (Resthopper.IO.DataTree <ResthopperObject> tree in input.Values)
{
string paramname = tree.ParamName;
if (group.NickName == paramname)
{
switch (code)
{
case GHTypeCodes.Boolean:
//PopulateParam<GH_Boolean>(goo, tree);
Param_Boolean boolParam = param as Param_Boolean;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Boolean> objectList = new List <GH_Boolean>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
bool boolean = JsonConvert.DeserializeObject <bool>(restobj.Data);
GH_Boolean data = new GH_Boolean(boolean);
boolParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Point:
//PopulateParam<GH_Point>(goo, tree);
Param_Point ptParam = param as Param_Point;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Point> objectList = new List <GH_Point>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Point3d rPt = JsonConvert.DeserializeObject <Rhino.Geometry.Point3d>(restobj.Data);
GH_Point data = new GH_Point(rPt);
ptParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Vector:
//PopulateParam<GH_Vector>(goo, tree);
Param_Vector vectorParam = param as Param_Vector;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Vector> objectList = new List <GH_Vector>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Vector3d rhVector = JsonConvert.DeserializeObject <Rhino.Geometry.Vector3d>(restobj.Data);
GH_Vector data = new GH_Vector(rhVector);
vectorParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Integer:
//PopulateParam<GH_Integer>(goo, tree);
Param_Integer integerParam = param as Param_Integer;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Integer> objectList = new List <GH_Integer>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
int rhinoInt = JsonConvert.DeserializeObject <int>(restobj.Data);
GH_Integer data = new GH_Integer(rhinoInt);
integerParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Number:
//PopulateParam<GH_Number>(goo, tree);
Param_Number numberParam = param as Param_Number;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Number> objectList = new List <GH_Number>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
double rhNumber = JsonConvert.DeserializeObject <double>(restobj.Data);
GH_Number data = new GH_Number(rhNumber);
numberParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Text:
//PopulateParam<GH_String>(goo, tree);
Param_String stringParam = param as Param_String;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_String> objectList = new List <GH_String>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
string rhString = JsonConvert.DeserializeObject <string>(restobj.Data);
GH_String data = new GH_String(rhString);
stringParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Line:
//PopulateParam<GH_Line>(goo, tree);
Param_Line lineParam = param as Param_Line;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Line> objectList = new List <GH_Line>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Line rhLine = JsonConvert.DeserializeObject <Rhino.Geometry.Line>(restobj.Data);
GH_Line data = new GH_Line(rhLine);
lineParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Curve:
//PopulateParam<GH_Curve>(goo, tree);
Param_Curve curveParam = param as Param_Curve;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Curve> objectList = new List <GH_Curve>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
GH_Curve ghCurve;
try
{
Rhino.Geometry.Polyline data = JsonConvert.DeserializeObject <Rhino.Geometry.Polyline>(restobj.Data);
Rhino.Geometry.Curve c = new Rhino.Geometry.PolylineCurve(data);
ghCurve = new GH_Curve(c);
}
catch
{
Rhino.Geometry.NurbsCurve data = JsonConvert.DeserializeObject <Rhino.Geometry.NurbsCurve>(restobj.Data);
Rhino.Geometry.Curve c = new Rhino.Geometry.NurbsCurve(data);
ghCurve = new GH_Curve(c);
}
curveParam.AddVolatileData(path, i, ghCurve);
}
}
break;
case GHTypeCodes.Circle:
//PopulateParam<GH_Circle>(goo, tree);
Param_Circle circleParam = param as Param_Circle;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Circle> objectList = new List <GH_Circle>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Circle rhCircle = JsonConvert.DeserializeObject <Rhino.Geometry.Circle>(restobj.Data);
GH_Circle data = new GH_Circle(rhCircle);
circleParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.PLane:
//PopulateParam<GH_Plane>(goo, tree);
Param_Plane planeParam = param as Param_Plane;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Plane> objectList = new List <GH_Plane>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Plane rhPlane = JsonConvert.DeserializeObject <Rhino.Geometry.Plane>(restobj.Data);
GH_Plane data = new GH_Plane(rhPlane);
planeParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Rectangle:
//PopulateParam<GH_Rectangle>(goo, tree);
Param_Rectangle rectangleParam = param as Param_Rectangle;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Rectangle> objectList = new List <GH_Rectangle>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Rectangle3d rhRectangle = JsonConvert.DeserializeObject <Rhino.Geometry.Rectangle3d>(restobj.Data);
GH_Rectangle data = new GH_Rectangle(rhRectangle);
rectangleParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Box:
//PopulateParam<GH_Box>(goo, tree);
Param_Box boxParam = param as Param_Box;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Box> objectList = new List <GH_Box>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Box rhBox = JsonConvert.DeserializeObject <Rhino.Geometry.Box>(restobj.Data);
GH_Box data = new GH_Box(rhBox);
boxParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Surface:
//PopulateParam<GH_Surface>(goo, tree);
Param_Surface surfaceParam = param as Param_Surface;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Surface> objectList = new List <GH_Surface>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Surface rhSurface = JsonConvert.DeserializeObject <Rhino.Geometry.Surface>(restobj.Data);
GH_Surface data = new GH_Surface(rhSurface);
surfaceParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Brep:
//PopulateParam<GH_Brep>(goo, tree);
Param_Brep brepParam = param as Param_Brep;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Brep> objectList = new List <GH_Brep>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Brep rhBrep = JsonConvert.DeserializeObject <Rhino.Geometry.Brep>(restobj.Data);
GH_Brep data = new GH_Brep(rhBrep);
brepParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Mesh:
//PopulateParam<GH_Mesh>(goo, tree);
Param_Mesh meshParam = param as Param_Mesh;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Mesh> objectList = new List <GH_Mesh>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Mesh rhMesh = JsonConvert.DeserializeObject <Rhino.Geometry.Mesh>(restobj.Data);
GH_Mesh data = new GH_Mesh(rhMesh);
meshParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Slider:
//PopulateParam<GH_Number>(goo, tree);
GH_NumberSlider sliderParam = param as GH_NumberSlider;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Number> objectList = new List <GH_Number>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
double rhNumber = JsonConvert.DeserializeObject <double>(restobj.Data);
GH_Number data = new GH_Number(rhNumber);
sliderParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.BooleanToggle:
//PopulateParam<GH_Boolean>(goo, tree);
GH_BooleanToggle toggleParam = param as GH_BooleanToggle;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Boolean> objectList = new List <GH_Boolean>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
bool rhBoolean = JsonConvert.DeserializeObject <bool>(restobj.Data);
GH_Boolean data = new GH_Boolean(rhBoolean);
toggleParam.AddVolatileData(path, i, data);
}
}
break;
case GHTypeCodes.Panel:
//PopulateParam<GH_String>(goo, tree);
GH_Panel panelParam = param as GH_Panel;
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
List <GH_Panel> objectList = new List <GH_Panel>();
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
string rhString = JsonConvert.DeserializeObject <string>(restobj.Data);
GH_String data = new GH_String(rhString);
panelParam.AddVolatileData(path, i, data);
}
}
break;
}
}
}
}
}
Schema OutputSchema = new Schema();
OutputSchema.Algo = Utils.Base64Encode(string.Empty);
// Parse output params
foreach (var obj in definition.Objects)
{
var group = obj as GH_Group;
if (group == null)
{
continue;
}
if (group.NickName.Contains("RH_OUT"))
{
// It is a RestHopper output group!
GHTypeCodes code = (GHTypeCodes)Int32.Parse(group.NickName.Split(':')[1]);
var param = group.Objects()[0] as IGH_Param;
if (param == null)
{
continue;
}
try
{
param.CollectData();
param.ComputeData();
}
catch (Exception)
{
param.Phase = GH_SolutionPhase.Failed;
// TODO: throw something better
throw;
}
// Get data
Resthopper.IO.DataTree <ResthopperObject> OutputTree = new Resthopper.IO.DataTree <ResthopperObject>();
OutputTree.ParamName = group.NickName;
var volatileData = param.VolatileData;
for (int p = 0; p < volatileData.PathCount; p++)
{
List <ResthopperObject> ResthopperObjectList = new List <ResthopperObject>();
foreach (var goo in volatileData.get_Branch(p))
{
if (goo == null)
{
continue;
}
else if (goo.GetType() == typeof(GH_Boolean))
{
GH_Boolean ghValue = goo as GH_Boolean;
bool rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <bool>(rhValue));
}
else if (goo.GetType() == typeof(GH_Point))
{
GH_Point ghValue = goo as GH_Point;
Point3d rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Point3d>(rhValue));
}
else if (goo.GetType() == typeof(GH_Vector))
{
GH_Vector ghValue = goo as GH_Vector;
Vector3d rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Vector3d>(rhValue));
}
else if (goo.GetType() == typeof(GH_Integer))
{
GH_Integer ghValue = goo as GH_Integer;
int rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <int>(rhValue));
}
else if (goo.GetType() == typeof(GH_Number))
{
GH_Number ghValue = goo as GH_Number;
double rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <double>(rhValue));
}
else if (goo.GetType() == typeof(GH_String))
{
GH_String ghValue = goo as GH_String;
string rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <string>(rhValue));
}
else if (goo.GetType() == typeof(GH_Line))
{
GH_Line ghValue = goo as GH_Line;
Line rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Line>(rhValue));
}
else if (goo.GetType() == typeof(GH_Curve))
{
GH_Curve ghValue = goo as GH_Curve;
Curve rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Curve>(rhValue));
}
else if (goo.GetType() == typeof(GH_Circle))
{
GH_Circle ghValue = goo as GH_Circle;
Circle rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Circle>(rhValue));
}
else if (goo.GetType() == typeof(GH_Plane))
{
GH_Plane ghValue = goo as GH_Plane;
Plane rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Plane>(rhValue));
}
else if (goo.GetType() == typeof(GH_Rectangle))
{
GH_Rectangle ghValue = goo as GH_Rectangle;
Rectangle3d rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Rectangle3d>(rhValue));
}
else if (goo.GetType() == typeof(GH_Box))
{
GH_Box ghValue = goo as GH_Box;
Box rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Box>(rhValue));
}
else if (goo.GetType() == typeof(GH_Surface))
{
GH_Surface ghValue = goo as GH_Surface;
Brep rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Brep>(rhValue));
}
else if (goo.GetType() == typeof(GH_Brep))
{
GH_Brep ghValue = goo as GH_Brep;
Brep rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Brep>(rhValue));
}
else if (goo.GetType() == typeof(GH_Mesh))
{
GH_Mesh ghValue = goo as GH_Mesh;
Mesh rhValue = ghValue.Value;
ResthopperObjectList.Add(GetResthopperObject <Mesh>(rhValue));
}
}
GhPath path = new GhPath(new int[] { p });
OutputTree.Add(path.ToString(), ResthopperObjectList);
}
OutputSchema.Values.Add(OutputTree);
}
}
if (OutputSchema.Values.Count < 1)
{
throw new System.Exceptions.PayAttentionException("Looks like you've missed something..."); // TODO
}
string returnJson = JsonConvert.SerializeObject(OutputSchema);
return(returnJson);
}
/// <summary>
/// Constructs a new surface of revolution from a generatrix polyline and an axis.
/// <para>This overload accepts a slice start and end angles.</para>
/// </summary>
/// <param name="revolutePolyline">A generatrix.</param>
/// <param name="axisOfRevolution">An axis.</param>
/// <param name="startAngleRadians">An angle in radias for the start.</param>
/// <param name="endAngleRadians">An angle in radias for the end.</param>
/// <returns>A new surface of revolution, or null if any of the inputs is invalid or on error.</returns>
public static RevSurface Create(Polyline revolutePolyline, Line axisOfRevolution, double startAngleRadians, double endAngleRadians)
{
using (PolylineCurve plc = new PolylineCurve(revolutePolyline))
{
return Create(plc, axisOfRevolution, startAngleRadians, endAngleRadians);
}
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
//Reference adaptive = uidoc.Selection.PickObject(ObjectType.Element, "Select adaptive family");
//Element adaptiveEle = doc.GetElement(adaptive);
//PlanarFace pf = GetFace(adaptiveEle);
//TaskDialog.Show("tr", "I am done");
//TaskDialog.Show("tr", "so done");
//TaskDialog.Show("tr", "done done");
List <RG.Point3d> pts = new List <RG.Point3d> {
new RG.Point3d(0, 0, 0), new RG.Point3d(5, 10, 0), new RG.Point3d(15, 5, 0), new RG.Point3d(20, 0, 0)
};
RG.PolylineCurve pc = new RG.PolylineCurve(pts);
RG.Interval d = pc.Domain;
//TaskDialog.Show("r", d.ToString());
RG.NurbsCurve value = pc.ToNurbsCurve();
value.IncreaseDegree(3);
int newDegree = 3;
var degree = value.Degree;
var knots = ToDoubleArray(value.Knots, newDegree);
var controlPoints = ToXYZArray(value.Points, 1);
var weights = value.Points.ConvertAll(x => x.Weight);
XYZ normal = new XYZ(0, 0, 1);
XYZ origin = new XYZ(0, 0, 0);
Plane rvtPlane = Plane.CreateByNormalAndOrigin(normal, origin);
string knot = "";
foreach (var item in knots)
{
knot += item.ToString() + "\n";
}
//TaskDialog.Show("r", knot);
//TaskDialog.Show("R", $"ControlPoints > Degree: {controlPoints.Length} > {degree}\nKnots = degree + control points + 1 = {controlPoints.Length + degree + 1} ");
Curve rvtN = NurbSpline.CreateCurve(newDegree, knots, controlPoints);
//Trace.WriteLine()
using (Transaction t = new Transaction(doc, "a"))
{
t.Start();
SketchPlane sketchPlane = SketchPlane.Create(doc, rvtPlane);
doc.Create.NewModelCurve(rvtN, sketchPlane);
t.Commit();
}
return(Result.Succeeded);
}
public void SetInputs(List <DataTree <ResthopperObject> > values)
{
foreach (var tree in values)
{
if (!_input.TryGetValue(tree.ParamName, out var inputGroup))
{
continue;
}
if (inputGroup.AlreadySet(tree))
{
Console.WriteLine("Skipping input tree... same input");
continue;
}
inputGroup.CacheTree(tree);
inputGroup.Param.VolatileData.Clear();
inputGroup.Param.ExpireSolution(true);
if (inputGroup.Param is Param_Point)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Point3d rPt = JsonConvert.DeserializeObject <Rhino.Geometry.Point3d>(restobj.Data);
GH_Point data = new GH_Point(rPt);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Vector)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Vector3d rhVector = JsonConvert.DeserializeObject <Rhino.Geometry.Vector3d>(restobj.Data);
GH_Vector data = new GH_Vector(rhVector);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Integer)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
int rhinoInt = JsonConvert.DeserializeObject <int>(restobj.Data);
GH_Integer data = new GH_Integer(rhinoInt);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Number)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
double rhNumber = JsonConvert.DeserializeObject <double>(restobj.Data);
GH_Number data = new GH_Number(rhNumber);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_String)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
string rhString = restobj.Data;
GH_String data = new GH_String(rhString);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Line)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Line rhLine = JsonConvert.DeserializeObject <Rhino.Geometry.Line>(restobj.Data);
GH_Line data = new GH_Line(rhLine);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Curve)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
GH_Curve ghCurve;
try
{
Rhino.Geometry.Polyline data = JsonConvert.DeserializeObject <Rhino.Geometry.Polyline>(restobj.Data);
Rhino.Geometry.Curve c = new Rhino.Geometry.PolylineCurve(data);
ghCurve = new GH_Curve(c);
}
catch
{
var dict = JsonConvert.DeserializeObject <Dictionary <string, string> >(restobj.Data);
var c = (Rhino.Geometry.Curve)Rhino.Runtime.CommonObject.FromJSON(dict);
ghCurve = new GH_Curve(c);
}
inputGroup.Param.AddVolatileData(path, i, ghCurve);
}
}
continue;
}
if (inputGroup.Param is Param_Circle)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Circle rhCircle = JsonConvert.DeserializeObject <Rhino.Geometry.Circle>(restobj.Data);
GH_Circle data = new GH_Circle(rhCircle);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Plane)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Plane rhPlane = JsonConvert.DeserializeObject <Rhino.Geometry.Plane>(restobj.Data);
GH_Plane data = new GH_Plane(rhPlane);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Rectangle)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Rectangle3d rhRectangle = JsonConvert.DeserializeObject <Rhino.Geometry.Rectangle3d>(restobj.Data);
GH_Rectangle data = new GH_Rectangle(rhRectangle);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Box)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Box rhBox = JsonConvert.DeserializeObject <Rhino.Geometry.Box>(restobj.Data);
GH_Box data = new GH_Box(rhBox);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Surface)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Surface rhSurface = JsonConvert.DeserializeObject <Rhino.Geometry.Surface>(restobj.Data);
GH_Surface data = new GH_Surface(rhSurface);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Brep)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Brep rhBrep = JsonConvert.DeserializeObject <Rhino.Geometry.Brep>(restobj.Data);
GH_Brep data = new GH_Brep(rhBrep);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Mesh)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
Rhino.Geometry.Mesh rhMesh = JsonConvert.DeserializeObject <Rhino.Geometry.Mesh>(restobj.Data);
GH_Mesh data = new GH_Mesh(rhMesh);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is GH_NumberSlider)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
double rhNumber = JsonConvert.DeserializeObject <double>(restobj.Data);
GH_Number data = new GH_Number(rhNumber);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is Param_Boolean || inputGroup.Param is GH_BooleanToggle)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
bool boolean = JsonConvert.DeserializeObject <bool>(restobj.Data);
GH_Boolean data = new GH_Boolean(boolean);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
if (inputGroup.Param is GH_Panel)
{
foreach (KeyValuePair <string, List <ResthopperObject> > entree in tree)
{
GH_Path path = new GH_Path(GhPath.FromString(entree.Key));
for (int i = 0; i < entree.Value.Count; i++)
{
ResthopperObject restobj = entree.Value[i];
string rhString = JsonConvert.DeserializeObject <string>(restobj.Data);
GH_String data = new GH_String(rhString);
inputGroup.Param.AddVolatileData(path, i, data);
}
}
continue;
}
}
}
/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
#region INPUTS
List<Curve> things = new List<Curve>();
if (!DA.GetDataList(0, things)) return;
#region Optional Inputs
int mainSegmentCount = 0;
if (!DA.GetData(1, ref mainSegmentCount)) { }
int subSegmentCount = 0;
if (!DA.GetData(2, ref subSegmentCount)) { }
double maxAngleRadians = 0.05;
if (!DA.GetData(3, ref maxAngleRadians)) { }
double maxChordLengthRatio = 0.1;
if (!DA.GetData(4, ref maxChordLengthRatio)) { }
double maxAspectRatio = 0;
if (!DA.GetData(5, ref maxAspectRatio)) { }
double tolerance = 0;
if (!DA.GetData(6, ref tolerance)) { }
double minEdgeLength = 0.1;
if (!DA.GetData(7, ref minEdgeLength)) { }
double maxEdgeLength = 0;
if (!DA.GetData(8, ref maxEdgeLength)) { }
bool keepStartPoint = true;
if (!DA.GetData(9, ref keepStartPoint)) { }
#endregion
#endregion
List<Curve>[] lines = new List<Curve>[things.Count];
List<PolylineCurve> polylines = new List<PolylineCurve>();
GH_Structure<GH_Curve> Lines = new GH_Structure<GH_Curve>();
for (int i = 0; i < things.Count; i++)
{
SilkwormSegment segment = new SilkwormSegment(things[i], mainSegmentCount, subSegmentCount, maxAngleRadians, maxChordLengthRatio, maxAspectRatio, tolerance, minEdgeLength, maxEdgeLength, keepStartPoint);
lines[i] = new List<Curve>();
lines[i].AddRange(segment.Segments);
PolylineCurve pline = new PolylineCurve(segment.Pline);
polylines.Add(pline);
}
// if (lines.GetUpperBound(0) > 1)
// {
// for (int i = 0; i < lines.Length; i++)
// {
// if (lines[i] != null)
// {
// for (int j = 0; j < lines[i].Count; j++)
// {
// GH_Curve glines = new GH_Curve(lines[i][j]);
// Lines.Insert(glines, new GH_Path(i), j);
// }
// }
// }
// }
//if (!DA.SetDataTree(0, Lines)) { return; }
if (!DA.SetDataList(0, polylines)) { return; }
}
/// <summary>
/// Gets a polyline approximation of a curve.
/// </summary>
/// <param name="mainSegmentCount">
/// If mainSegmentCount <= 0, then both subSegmentCount and mainSegmentCount are ignored.
/// If mainSegmentCount > 0, then subSegmentCount must be >= 1. In this
/// case the nurb will be broken into mainSegmentCount equally spaced
/// chords. If needed, each of these chords can be split into as many
/// subSegmentCount sub-parts if the subdivision is necessary for the
/// mesh to meet the other meshing constraints. In particular, if
/// subSegmentCount = 0, then the curve is broken into mainSegmentCount
/// pieces and no further testing is performed.</param>
/// <param name="subSegmentCount">An amount of subsegments.</param>
/// <param name="maxAngleRadians">
/// ( 0 to pi ) Maximum angle (in radians) between unit tangents at
/// adjacent vertices.</param>
/// <param name="maxChordLengthRatio">Maximum permitted value of
/// (distance chord midpoint to curve) / (length of chord).</param>
/// <param name="maxAspectRatio">If maxAspectRatio < 1.0, the parameter is ignored.
/// If 1 <= maxAspectRatio < sqrt(2), it is treated as if maxAspectRatio = sqrt(2).
/// This parameter controls the maximum permitted value of
/// (length of longest chord) / (length of shortest chord).</param>
/// <param name="tolerance">If tolerance = 0, the parameter is ignored.
/// This parameter controls the maximum permitted value of the
/// distance from the curve to the polyline.</param>
/// <param name="minEdgeLength">The minimum permitted edge length.</param>
/// <param name="maxEdgeLength">If maxEdgeLength = 0, the parameter
/// is ignored. This parameter controls the maximum permitted edge length.
/// </param>
/// <param name="keepStartPoint">If true the starting point of the curve
/// is added to the polyline. If false the starting point of the curve is
/// not added to the polyline.</param>
/// <param name="curveDomain">This subdomain of the NURBS curve is approximated.</param>
/// <returns>PolylineCurve on success, null on error.</returns>
public PolylineCurve ToPolyline(int mainSegmentCount, int subSegmentCount,
double maxAngleRadians, double maxChordLengthRatio, double maxAspectRatio,
double tolerance, double minEdgeLength, double maxEdgeLength, bool keepStartPoint,
Interval curveDomain)
{
IntPtr ptr = ConstPointer();
PolylineCurve poly = new PolylineCurve();
IntPtr polyOut = poly.NonConstPointer();
bool rc = UnsafeNativeMethods.RHC_RhinoConvertCurveToPolyline(ptr,
mainSegmentCount, subSegmentCount, maxAngleRadians,
maxChordLengthRatio, maxAspectRatio, tolerance, minEdgeLength, maxEdgeLength, polyOut,
keepStartPoint, curveDomain, false);
if (!rc)
{
poly.Dispose();
poly = null;
}
return poly;
}
/// <summary>
/// Constructs a nurbs curve representation of this polyline.
/// </summary>
/// <returns>A Nurbs curve shaped like this polyline or null on failure.</returns>
public NurbsCurve ToNurbsCurve()
{
if (m_size < 2) { return null; }
PolylineCurve pl_crv = new PolylineCurve(this);
return pl_crv.ToNurbsCurve();
}
