public PrinterInfo()
{
con = Main.conn;
InitializeComponent();
RegMemory.RestoreWindowPos("printerInfoWindow", this);
timer_Tick(null, null);
}
protected virtual void CaptureState(PrinterConnection conn)
{
GCodeAnalyzer analyzer = conn.analyzer;
this.x = analyzer.RealX;
this.y = analyzer.RealY;
this.z = analyzer.RealZ;
this.fanVoltage = analyzer.fanVoltage;
this.fanOn = analyzer.fanOn;
this.speed = analyzer.f;
this.layer = analyzer.layer;
this.extrudersTemp = new float[conn.extruderTemp.Count];
for (int extr = 0; extr < conn.extruderTemp.Count; extr++)
{
// Use the configured temperature, not the measured
// temperature.
this.extrudersTemp[extr] = conn.analyzer.getTemperature(extr);
//this.extrudersTemp[extr] = conn.extruderTemp[extr];
}
// Use the configured temperature, not the measured temperature.
this.bedTemp = conn.analyzer.bedTemp;
//this.bedTemp = conn.bedTemp;
this.activeExtruderId = analyzer.activeExtruderId;
this.relative = analyzer.relative;
this.activeExtruderValue = analyzer.activeExtruder.e - analyzer.activeExtruder.eOffset;
}
public Main()
{
repetierKey = Registry.CurrentUser.CreateSubKey("Software\\Repetier");
main = this;
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
threeDSettings = new ThreeDSettings();
InitializeComponent();
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel1.Controls.Add(printPanel);
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitVert.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey,true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
printPreview = new ThreeDControl();
printPreview.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.AutoUpdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printPreview.models.AddLast(printVisual);
basicTitle = Text;
}
public PrintPanel()
{
InitializeComponent();
con = Main.conn;
ann = con.analyzer;
con.eventConnectionChange += ConnectionChanged;
ann.fanVoltage = trackFanVoltage.Value;
con.eventTempChange += tempUpdate;
// ann.eventPosChanged += coordUpdate;
ann.eventChange += analyzerChange;
UpdateConStatus(false);
textExtrudeSpeed.Text = RegMemory.GetString("panelExtrudeSpeed", textExtrudeSpeed.Text);
textExtrudeAmount.Text = RegMemory.GetString("panelExtrudeAmount", textExtrudeAmount.Text);
textRetractAmount.Text = RegMemory.GetString("panelRetractAmount", textRetractAmount.Text);
float volt = 100f * trackFanVoltage.Value / 255;
labelVoltage.Text = Trans.T1("L_OUTPUT_PERCENT",volt.ToString("0.0")); //"Output " + volt.ToString("0.0") + "%";
arrowButtonXMinus.PossibleValues = Custom.GetString("xyMoveDistances", arrowButtonXMinus.PossibleValues);
arrowButtonXPlus.PossibleValues = Custom.GetString("xyMoveDistances", arrowButtonXPlus.PossibleValues);
arrowButtonYMinus.PossibleValues = Custom.GetString("xyMoveDistances", arrowButtonYMinus.PossibleValues);
arrowButtonYPlus.PossibleValues = Custom.GetString("xyMoveDistances", arrowButtonYPlus.PossibleValues);
if (Custom.GetBool("noPowerControlButton", false))
switchPower.Visible = false;
timer.Start();
comboExtruder.SelectedIndex = 0;
if (Main.main != null)
{
translate();
Main.main.languageChanged += translate;
}
}
internal static PrintingStateSnapshot GeneratePrintingStateSnapshot(PrinterConnection conn)
{
// Analyze status and save state.
GCodeAnalyzer analyzer = conn.analyzer;
PrintingStateSnapshot s = new PrintingStateSnapshot();
s.x = analyzer.RealX;
s.y = analyzer.RealY;
s.z = analyzer.RealZ;
s.fanVoltage = analyzer.fanVoltage;
s.fanOn = analyzer.fanOn;
s.speed = analyzer.f;
s.layer = analyzer.layer;
s.extrudersTemp = new float[conn.extruderTemp.Count];
for (int extr = 0; extr < conn.extruderTemp.Count; extr++)
{
// Use the configured temperature, not the measured
// temperature.
s.extrudersTemp[extr] = conn.analyzer.getTemperature(extr);
//s.extrudersTemp[extr] = conn.extruderTemp[extr];
}
// Use the configured temperature, not the measured temperature.
s.bedTemp = conn.analyzer.bedTemp;
//s.bedTemp = conn.bedTemp;
s.activeExtruderId = analyzer.activeExtruderId;
s.relative = analyzer.relative;
s.activeExtruderValue = analyzer.activeExtruder.e - analyzer.activeExtruder.eOffset;
s.remainingCode = GetRemainingGcode(conn);
return(s);
}
internal static PrintingStateSnapshot GeneratePrintingStateSnapshot(PrinterConnection conn)
{
// Analyze status and save state.
GCodeAnalyzer analyzer = conn.analyzer;
PrintingStateSnapshot s = new PrintingStateSnapshot();
s.x = analyzer.RealX;
s.y = analyzer.RealY;
s.z = analyzer.RealZ;
s.fanVoltage = analyzer.fanVoltage;
s.fanOn = analyzer.fanOn;
s.speed = analyzer.f;
s.layer = analyzer.layer;
s.extrudersTemp = new float[conn.extruderTemp.Count];
for (int extr = 0; extr < conn.extruderTemp.Count; extr++ )
{
// Use the configured temperature, not the measured
// temperature.
s.extrudersTemp[extr] = conn.analyzer.getTemperature(extr);
//s.extrudersTemp[extr] = conn.extruderTemp[extr];
}
// Use the configured temperature, not the measured temperature.
s.bedTemp = conn.analyzer.bedTemp;
//s.bedTemp = conn.bedTemp;
s.activeExtruderId = analyzer.activeExtruderId;
s.relative = analyzer.relative;
s.activeExtruderValue = analyzer.activeExtruder.e - analyzer.activeExtruder.eOffset;
s.remainingCode = GetRemainingGcode(conn);
return s;
}
// other snapshot attributes are inherited from PrintingState
internal static PrintingStateSnapshot GeneratePrintingStateSnapshot(PrinterConnection conn)
{
// Analyze status and save state.
PrintingStateSnapshot s = new PrintingStateSnapshot();
s.CaptureState(conn);
s.remainingCode = GetRemainingGcode(conn);
return s;
}
internal static string GetRemainingGcode(PrinterConnection conn)
{
StringBuilder remainingCodeSb = new StringBuilder();
foreach (GCodeCompressed gc in conn.connector.Job.GetPendingJobCommands())
{
remainingCodeSb.AppendLine(gc.getCode().orig);
}
return remainingCodeSb.ToString();
}
public PrinterInfo()
{
con = Main.conn;
InitializeComponent();
RegMemory.RestoreWindowPos("printerInfoWindow", this);
timer_Tick(null, null);
translate();
Main.main.languageChanged += translate;
}
internal static string GetRemainingGcode(PrinterConnection conn)
{
StringBuilder remainingCodeSb = new StringBuilder();
foreach (GCodeCompressed gc in conn.connector.Job.GetPendingJobCommands())
{
remainingCodeSb.AppendLine(gc.getCode().orig);
}
return(remainingCodeSb.ToString());
}
public void stats()
{
PrinterConnection.logInfo("Path segments:" + segments.Count.ToString());
int pts = 0;
foreach (GCodePath p in segments)
{
pts += p.pointsCount;
}
PrinterConnection.logInfo("Points total:" + pts.ToString());
}
public PrintPanel()
{
InitializeComponent();
con = Main.conn;
ann = con.analyzer;
con.eventConnectionChange += ConnectionChanged;
con.eventTempChange += tempUpdate;
ann.eventPosChanged += coordUpdate;
ann.eventChange += analyzerChange;
UpdateConStatus(false);
float volt = 100f * trackFanVoltage.Value / 255;
labelVoltage.Text = "Output " + volt.ToString("0.0") + "%";
}
public FormPrinterSettings()
{
InitializeComponent();
repetierKey = Registry.CurrentUser.CreateSubKey("Software\\Repetier");
printerKey = repetierKey.CreateSubKey("printer");
con = Main.conn;
conToForm();
comboPrinter.Items.Clear();
foreach (string s in printerKey.GetSubKeyNames())
comboPrinter.Items.Add(s);
con.printerName = (string)repetierKey.GetValue("currentPrinter", "default");
load(con.printerName);
formToCon();
UpdateDimensions();
}
public FormPrinterSettings()
{
InitializeComponent();
RegMemory.RestoreWindowPos("printerSettingsWindow", this);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
printerKey = repetierKey.CreateSubKey("printer");
con = Main.conn;
conToForm();
comboPrinter.Items.Clear();
foreach (string s in printerKey.GetSubKeyNames())
comboPrinter.Items.Add(s);
con.printerName = (string)repetierKey.GetValue("currentPrinter", "default");
load(con.printerName);
formToCon();
UpdateDimensions();
if (Custom.GetBool("simpleConnectionsConfig", false))
{
comboParity.Visible = false;
comboStopbits.Visible = false;
labelStopbits.Visible = false;
labelParity.Visible = false;
}
if (Custom.GetBool("noDisposeArea", false))
{
labelDumpAreaDepth.Visible = false;
labelDumpAreaFront.Visible = false;
labelDumpAreaLeft.Visible = false;
labelDumpAreaWidth.Visible = false;
labelDumpUnit1.Visible = false;
labelDumpUnit2.Visible = false;
labelDumpUnit3.Visible = false;
labelDumpUnit4.Visible = false;
checkHasDumpArea.Visible = false;
textDumpAreaDepth.Visible = false;
textDumpAreaFront.Visible = false;
textDumpAreaLeft.Visible = false;
textDumpAreaWidth.Visible = false;
}
if (Custom.GetBool("noMaxHoming", false))
{
checkHomeXMax.Visible = false;
checkHomeYMax.Visible = false;
checkHomeZMax.Visible = false;
}
Main.main.languageChanged += translate;
translate();
}
public PrintPanel()
{
InitializeComponent();
con = Main.conn;
ann = con.analyzer;
con.eventConnectionChange += ConnectionChanged;
ann.fanVoltage = trackFanVoltage.Value;
con.eventTempChange += tempUpdate;
// ann.eventPosChanged += coordUpdate;
ann.eventChange += analyzerChange;
UpdateConStatus(false);
textExtrudeSpeed.Text = RegMemory.GetString("panelExtrudeSpeed", textExtrudeSpeed.Text);
textExtrudeAmount.Text = RegMemory.GetString("panelExtrudeAmount", textExtrudeAmount.Text);
textRetractAmount.Text = RegMemory.GetString("panelRetractAmount", textRetractAmount.Text);
float volt = 100f * trackFanVoltage.Value / 255;
labelVoltage.Text = "Output " + volt.ToString("0.0") + "%";
timer.Start();
}
public FormPrinterSettings()
{
ps = this;
InitializeComponent();
addConnector(new SerialConnector());
addConnector(new VirtualPrinterConnector());
RegMemory.RestoreWindowPos("printerSettingsWindow", this);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
printerKey = repetierKey.CreateSubKey("printer");
con = Main.conn;
conToForm();
comboPrinter.Items.Clear();
/*bindingConnectors.DataSource = connectors;
comboConnector.DataSource = bindingConnectors.DataSource;
comboConnector.DisplayMember = "Name";
comboConnector.ValueMember = "Id";*/
foreach (string s in printerKey.GetSubKeyNames())
comboPrinter.Items.Add(s);
con.printerName = (string)repetierKey.GetValue("currentPrinter", "default");
load(con.printerName);
formToCon();
UpdateDimensions();
/* if (Custom.GetBool("noDisposeArea", false))
{
labelDumpAreaDepth.Visible = false;
labelDumpAreaFront.Visible = false;
labelDumpAreaLeft.Visible = false;
labelDumpAreaWidth.Visible = false;
labelDumpUnit1.Visible = false;
labelDumpUnit2.Visible = false;
labelDumpUnit3.Visible = false;
labelDumpUnit4.Visible = false;
checkHasDumpArea.Visible = false;
textDumpAreaDepth.Visible = false;
textDumpAreaFront.Visible = false;
textDumpAreaLeft.Visible = false;
textDumpAreaWidth.Visible = false;
}*/
Main.main.languageChanged += translate;
translate();
}
public static PrintingStateSnapshot TakeSnapshot(PrinterConnection conn)
{
return(PrintingStateSnapshot.GeneratePrintingStateSnapshot(conn));
}
public static PrintingStateSnapshot TakeSnapshot(PrinterConnection conn)
{
return PrintingStateSnapshot.GeneratePrintingStateSnapshot(conn);
}
public SerialConnector()
{
con = Main.conn;
job = new Printjob(Main.conn);
writeEvent = new AutoResetEvent(false);
if (Environment.OSVersion.Platform == PlatformID.Unix)
port = "/dev/ttyUSB0";
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
SplashScreen.run();
trans = new Trans(Application.StartupPath + Path.DirectorySeparatorChar + "data" + Path.DirectorySeparatorChar + "translations");
SwitchButton.imageOffset = RegMemory.GetInt("onOffImageOffset", 0);
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
printerModel = new PrinterModel();
conn.analyzer.start(true);
threeDSettings = new ThreeDSettings();
InitializeComponent();
tdSettings.DataSource = threeDSettings;
tdSettings_DataMemberChanged(null, null);
editor = new RepetierEditor();
editor.Dock = DockStyle.Fill;
tabGCode.Controls.Add(editor);
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
splitPrinterId.Panel1Collapsed = !RegMemory.GetBool("printerIdShow", false);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
objectPlacement = new STLComposer();
objectPlacement.Dock = DockStyle.Fill;
tabModel.Controls.Add(objectPlacement);
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
{
showWorkdirectoryToolStripMenuItem.Visible = false;
toolStrip.Height = 56;
}
new SoundConfig();
//stlComposer1.buttonSlice.Text = Trans.T1("L_SLICE_WITH", slicer.SlicerName);
// Customizations
if(Custom.GetBool("removeTestgenerator",false)) {
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
string titlePrefix = Custom.GetString("titlePrefix", "");
if (titleAdd.Length > 0 || titlePrefix.Length>0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = titlePrefix+basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
if (Custom.GetBool("removeUpdates", false))
checkForUpdatesToolStripMenuItem.Visible = false;
else
RHUpdater.checkForUpdates(true);
UpdateToolbarSize();
// Add languages
foreach (Translation t in trans.translations.Values)
{
ToolStripMenuItem item = new ToolStripMenuItem(t.language,null, languageSelected);
item.Tag = t;
languageToolStripMenuItem.DropDownItems.Add(item);
}
languageChanged += translate;
translate();
if (Custom.GetBool("removeSkeinforge", false))
{
Main.slicer.ActiveSlicer = Slicer.SlicerID.Slic3r;
}
if (Custom.GetBool("extraSupportButton", false))
{
supportToolStripMenuItem.Text = Custom.GetString("extraSupportText", "Support");
}
else
{
toolStripAskSeperator.Visible = false;
supportToolStripMenuItem.Visible = false;
}
if (Custom.GetString("extraLink1Title", "").Length>0)
{
extraUrl1ToolStripMenuItem.Text = Custom.GetString("extraLink1Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl1ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink2Title", "").Length > 0)
{
extraUrl2ToolStripMenuItem.Text = Custom.GetString("extraLink2Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl2ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink3Title", "").Length > 0)
{
extraUrl3ToolStripMenuItem.Text = Custom.GetString("extraLink3Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl3ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink4Title", "").Length > 0)
{
extraUrl4ToolStripMenuItem.Text = Custom.GetString("extraLink4Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl4ToolStripMenuItem.Visible = false;
if (Custom.GetString("extraLink5Title", "").Length > 0)
{
extraUrl5ToolStripMenuItem.Text = Custom.GetString("extraLink5Title", "");
toolStripAskSeperator.Visible = true;
}
else extraUrl5ToolStripMenuItem.Visible = false;
string supportImage = Custom.GetString("extraSupportToolbarImage", "");
if (supportImage.Length > 0 && File.Exists(Application.StartupPath + Path.DirectorySeparatorChar + supportImage))
{
toolStripButtonSupport.Image = Image.FromFile(Application.StartupPath + Path.DirectorySeparatorChar + Custom.GetString("extraSupportToolbarImage", ""));
toolStripButtonSupport.Text = Custom.GetString("extraSupportText", "Support");
}
else
{
toolStripButtonSupport.Visible = false;
}
toolAction.Text = Trans.T("L_IDLE");
toolConnection.Text = Trans.T("L_DISCONNECTED");
updateTravelMoves();
printerIdLabel.Text = printerSettings.comboPrinter.Text;
this.AllowDrop = true;
this.DragEnter += new DragEventHandler(Form1_DragEnter);
this.DragDrop += new DragEventHandler(Form1_DragDrop);
extensions.ExtensionManager.Initalize();
if (conn.connector != null)
conn.connector.Activate();
//TestTopoTriangle triTests = new TestTopoTriangle();
//triTests.RunTests();
//everything done. Now look at command line
ProcessCommandLine();
snapshotToolStripMenuItem.Visible = false;
setImportUnits(RegMemory.GetDouble("importScaleFactor", importScaleFactor));
}
public Printjob(PrinterConnection c)
{
con = c;
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
conn.analyzer.start();
threeDSettings = new ThreeDSettings();
InitializeComponent();
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width-470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
showWorkdirectoryToolStripMenuItem.Visible = false;
new SoundConfig();
stlComposer1.buttonSlice.Text = "Slice with " + slicer.SlicerName;
// Customizations
if(Custom.GetBool("removeTestgenerator",false)) {
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
if (titleAdd.Length > 0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
}
public Printjob(PrinterConnection c)
{
con = c;
}
public PrinterConnectionGCodeExecutor(PrinterConnection conn, bool startImmediatelly)
{
this.conn = conn;
this.startImmediatelly = startImmediatelly;
}
private bool ValidatePreconditionsToSaveStateSnapshot(PrinterConnection conn)
{
return conn.connector.IsJobRunning();
}
public PrinterInfo()
{
con = Main.conn;
InitializeComponent();
timer_Tick(null, null);
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
repetierKey = Registry.CurrentUser.CreateSubKey("SOFTWARE\\Repetier");
repetierKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
repetierKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
conn.analyzer.start();
threeDSettings = new ThreeDSettings();
InitializeComponent();
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
if (IsMono)
{
if (!IsMac)
{
splitContainerPrinterGraphic.SplitterDistance += 52;
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
splitJob.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
toolShowLog.Checked = RegMemory.GetBool("logShow", true);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel1.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
printPreview = new ThreeDControl();
printPreview.Dock = DockStyle.Fill;
splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.AutoUpdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDControl();
jobPreview.Dock = DockStyle.Fill;
splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
if (IsMac)
{
tabGCode.Controls.Remove(splitJob);
tabPrint.Controls.Remove(splitContainerPrinterGraphic);
}
toolShowLog_CheckedChanged(null, null);
updateShowFilament();
}
public VirtualPrinterConnector()
{
virtualPrinter = new VirtualPrinter(this);
con = Main.conn;
job = new Printjob(Main.conn);
}
public void Analyze(GCode code)
{
if (code.hostCommand)
{
string cmd = code.getHostCommand();
if (cmd.Equals("@hide"))
{
drawing = false;
}
else if (cmd.Equals("@show"))
{
drawing = true;
}
else if (cmd.Equals("@isathome"))
{
hasXHome = hasYHome = hasZHome = true;
x = Main.printerSettings.XHomePos;
y = Main.printerSettings.YHomePos;
z = Main.printerSettings.ZHomePos;
xOffset = yOffset = zOffset = 0;
}
return;
}
//if (code.forceAscii) return; // Don't analyse host commands and unknown commands
if (code.hasN)
{
lastline = code.N;
}
if (uploading && !code.hasM && code.M != 29)
{
return; // ignore upload commands
}
if (code.hasG)
{
switch (code.G)
{
case 0:
case 1:
if (code.hasF)
{
f = code.F;
}
if (relative)
{
if (code.hasX)
{
x += code.X;
}
if (code.hasY)
{
y += code.Y;
}
if (code.hasZ)
{
z += code.Z;
}
if (code.hasE)
{
e += code.E;
}
}
else
{
if (code.hasX)
{
x = xOffset + code.X;
}
if (code.hasY)
{
y = yOffset + code.Y;
}
if (code.hasZ)
{
z = zOffset + code.Z;
}
if (code.hasE)
{
if (eRelative)
{
e += code.E;
}
else
{
e = eOffset + code.E;
}
}
}
if (x < Main.printerSettings.XMin)
{
x = Main.printerSettings.XMin; hasXHome = false;
}
if (y < Main.printerSettings.YMin)
{
y = Main.printerSettings.YMin; hasYHome = false;
}
if (z < 0)
{
z = 0; hasZHome = false;
}
if (x > Main.printerSettings.XMax)
{
hasXHome = false;
}
if (y > Main.printerSettings.YMax)
{
hasYHome = false;
}
if (z > printerHeight)
{
hasZHome = false;
}
if (e > emax)
{
emax = e;
if (z != lastZPrint)
{
layer++;
lastZPrint = z;
if (!privateAnalyzer && Main.conn.job.hasData() && Main.conn.job.maxLayer >= 0)
{
//PrinterConnection.logInfo("Printing layer " + layer.ToString() + " of " + Main.conn.job.maxLayer.ToString());
PrinterConnection.logInfo(Trans.T2("L_PRINTING_LAYER_X_OF_Y", layer.ToString(), Main.conn.job.maxLayer.ToString()));
}
}
}
if (eventPosChanged != null)
{
if (privateAnalyzer)
{
eventPosChanged(code, x, y, z);
}
else
{
Main.main.Invoke(eventPosChanged, code, x, y, z);
}
}
float dx = Math.Abs(x - lastX);
float dy = Math.Abs(y - lastY);
float dz = Math.Abs(z - lastZ);
float de = Math.Abs(e - lastE);
if (dx + dy + dz > 0.001)
{
printingTime += Math.Sqrt(dx * dx + dy * dy + dz * dz) * 60.0f / f;
}
else
{
printingTime += de * 60.0f / f;
}
lastX = x;
lastY = y;
lastZ = z;
lastE = e;
break;
case 28:
case 161:
{
bool homeAll = !(code.hasX || code.hasY || code.hasZ);
if (code.hasX || homeAll)
{
xOffset = 0; x = Main.printerSettings.XHomePos; hasXHome = true;
}
if (code.hasY || homeAll)
{
yOffset = 0; y = Main.printerSettings.YHomePos; hasYHome = true;
}
if (code.hasZ || homeAll)
{
zOffset = 0; z = Main.printerSettings.ZHomePos; hasZHome = true;
}
if (code.hasE)
{
eOffset = 0; e = 0; emax = 0;
}
if (eventPosChanged != null)
{
if (privateAnalyzer)
{
eventPosChanged(code, x, y, z);
}
else
{
Main.main.Invoke(eventPosChanged, code, x, y, z);
}
}
}
break;
case 162:
{
bool homeAll = !(code.hasX || code.hasY || code.hasZ);
if (code.hasX || homeAll)
{
xOffset = 0; x = Main.printerSettings.XMax; hasXHome = true;
}
if (code.hasY || homeAll)
{
yOffset = 0; y = Main.printerSettings.YMax; hasYHome = true;
}
if (code.hasZ || homeAll)
{
zOffset = 0; z = Main.printerSettings.PrintAreaHeight; hasZHome = true;
}
if (eventPosChanged != null)
{
if (privateAnalyzer)
{
eventPosChanged(code, x, y, z);
}
else
{
Main.main.Invoke(eventPosChanged, code, x, y, z);
}
}
}
break;
case 90:
relative = false;
break;
case 91:
relative = true;
break;
case 92:
if (code.hasX)
{
xOffset = x - code.X; x = xOffset;
}
if (code.hasY)
{
yOffset = y - code.Y; y = yOffset;
}
if (code.hasZ)
{
zOffset = z - code.Z; z = zOffset;
}
if (code.hasE)
{
eOffset = e - code.E; lastE = e = eOffset;
}
if (eventPosChanged != null)
{
if (privateAnalyzer)
{
eventPosChanged(code, x, y, z);
}
else
{
Main.main.Invoke(eventPosChanged, code, x, y, z);
}
}
break;
}
}
else if (code.hasM)
{
switch (code.M)
{
case 28:
uploading = true;
break;
case 29:
uploading = false;
break;
case 80:
powerOn = true;
fireChanged();
break;
case 81:
powerOn = false;
fireChanged();
break;
case 82:
eRelative = false;
break;
case 83:
eRelative = true;
break;
case 104:
case 109:
if (code.hasS)
{
extruderTemp = code.S;
}
fireChanged();
break;
case 106:
fanOn = true;
if (code.hasS)
{
fanVoltage = code.S;
}
fireChanged();
break;
case 107:
fanOn = false;
fireChanged();
break;
case 110:
lastline = code.N;
break;
case 111:
if (code.hasS)
{
debugLevel = code.S;
}
break;
case 140:
case 190:
if (code.hasS)
{
bedTemp = code.S;
}
fireChanged();
break;
case 203: // Temp monitor
if (code.hasS)
{
tempMonitor = code.S;
}
break;
case 220:
if (code.hasS)
{
speedMultiply = code.S;
}
break;
}
}
else if (code.hasT)
{
activeExtruder = code.T;
}
}
public PrinterConnectionGCodeExecutor(PrinterConnection conn, bool startImmediatelly)
{
this.conn = conn;
this.startImmediatelly = startImmediatelly;
}