public bool IsBarcodeMatched(object fileobj, string barcode)
{
Hanwha_PrinterData data = fileobj as Hanwha_PrinterData;
if (data.Panel.BarcodeId == barcode)
{
return(true);
}
else
{
return(false);
}
}
private XElement PROCESS_SECTION(InspectedPanel currentPanel, Hanwha_PrinterData data)
{
DateTime now = DateTime.Now;
XElement ret = new XElement(
"PROCESS",
new XElement("ProductName", currentPanel.Panel.ModelName),//目前用檢測的資料為主，SPEC沒有註明
new XElement("Date", now.ToString("yyyy_MM_dd")),
new XElement("Time", now.ToString("HH_mm_ss")),
//new XElement("PanelState", PanelStatus == eClosedLoopSPIStatus.NonInspected ? "NOT_INSPECTED" : "INSPECTED")//有INSPECTED / NOT_INSPECTED
new XElement("PanelState", "INSPECTED") //有INSPECTED / NOT_INSPECTED
);
return(ret);
}
private XElement DEFECT_SECTION(InspectedPanel currentPanel, Hanwha_PrinterData data)
{
//var tree = new TreeAccess(Panel);
//int PanelIndex = ProjectManager.getInstance().GetCurrentCarrier().GetPanelIndex(Panel);
var _boxList = GetBoxList(currentPanel);
var _failList = FailList(currentPanel);
XElement ret = new XElement(
"DEFECT",
new XElement("TotalCount", _boxList.Count),
new XElement("DefectCount",
new XAttribute("count", _failList.Count),
new XElement("Height",
new XAttribute("high", GetCount(_boxList, eOverallStatus.SOL_HEIGHTOVER)),
new XAttribute("low", GetCount(_boxList, eOverallStatus.SOL_HEIGHTUNDER))
),
new XElement("Volume",
new XAttribute("heigh", GetCount(_boxList, eOverallStatus.SOL_VOLUMEOVER)),
new XAttribute("low", GetCount(_boxList, eOverallStatus.SOL_VOLUMEUNDER))
),
new XElement("Area",
new XAttribute("heigh", GetCount(_boxList, eOverallStatus.SOL_AREAOVER)),
new XAttribute("low", GetCount(_boxList, eOverallStatus.SOL_AREAUNDER))
),
new XElement("Bridge",
new XAttribute("count", GetCount(_boxList, eOverallStatus.SOL_BRIDGE))
)
),
//new XElement("WarningCount",
// new XAttribute("count", InspectResultClass.getInstance().WarningCnt[PanelIndex])
// //new XElement("Height", InspectResultClass.getInstance().Fail[PanelIndex].)
// )
new XElement("DefectPosition", from box in _boxList
let id = box.FullName
let posx = box.CadCenter.X * 0.001 //Pad Position
let posy = box.CadCenter.Y * 0.001
let sizex = box.CadRect.Width * 0.001
let sizey = box.CadRect.Height * 0.001
let code = ToHanwhaPadType(box.Status)
select new XElement("Pad", new XAttribute("id", id), new XAttribute("posx", posx), new XAttribute("posy", posy), new XAttribute("sizex", sizex), new XAttribute("sizey", sizey), new XAttribute("code", code))
)
);
return(ret);
}
private XElement MEASUREMENTS_SECTION(Hanwha_PrinterData data)
{
XElement ret = new XElement(
"MEASUREMENTS",
new XElement("SqueegeeDir", "FORWARD"), //版的序列Hanwha只有兩種選擇 : FORWARD 1)↓Rear to Front 2)→Left to Right 和 REVERSE1)↑Front to Rear 2)←Right to Left
new XElement("CenterOfRotation", data.Panel.CenterOfRotation), //Fixed as PANEL_CENTER [Has Confirmed]
new XElement("Rotation", Math.Round(_RotationResult.Theta, 6)),
new XElement("OffsetX", Math.Round((_CenterOffsetResult.Dx * 0.001), 6)), //um=>mm
new XElement("OffsetY", Math.Round((_CenterOffsetResult.Dy * 0.001), 6)),
//new XElement("OffsetX", Math.Round((Dx * 0.00001), 6)),//單位mm [has confirmed] SPI是um
//new XElement("OffsetY", Math.Round((Dy * 0.00001), 6)),//單位mm [has confirmed] SPI是um
new XElement("Height", Math.Round((_HanwhaResult.avgHeight_pct * 0.001), 6)),
new XElement("Area", Math.Round((_HanwhaResult.avgArea_pct * 0.001), 6)),
new XElement("Volume", Math.Round((_HanwhaResult.avgVolume_pct * 0.001), 6))
);
return(ret);
}
private XElement HEADER_SECTION(InspectedPanel currentPanel, Hanwha_PrinterData data)
{
XElement ret = new XElement(
"HEADER",
new XElement("MachineName", "SPI"), //SPI fixed
new XElement("Reference", "BOTTOM_LEFT"), //應依照象限，固定，所以請設定象限1 [Has Comfirmed]
new XElement("Units",
new XElement("Distance", "mm"), //固定 [Has Comfirmed]
new XElement("Angle", "degree"), //固定 [Has Comfirmed]
new XElement("Time", "seconds"), //固定 [Has Comfirmed]
new XElement("Ratio", "percentage") //固定 [Has Comfirmed]
),
new XElement("DefineDirection", data.Header.DefineDirection)//不確定是否要按照得來的資訊 // Use as DEFINE_VERTICAL固定 [Has Comfirmed]
);
return(ret);
}
public object Parse(string filepath)
{
Hanwha_PrinterData ret = new Hanwha_PrinterData();
try
{
XElement Hanwha = XElement.Load(filepath);
//取得Print_Direction
ret.Header = new _HEADER(
Hanwha.getValue("MachineName"),
Hanwha.getValue("Reference"),
new __Unit(Hanwha.getValue("Distance"), Hanwha.getValue("Angle"), Hanwha.getValue("Time")),
Hanwha.getValue("DefineDirection")
);
ret.Panel = new _PANEL(
Hanwha.getValue("PanelId"),
Hanwha.getValue("BarcodeId"),
Hanwha.getValue("SqueegeeDir"),
null,
Hanwha.getValue("CenterOfRotation")
);
//目前只有需要PanelId
//if (ret.Panel.PanelId == null && ret.Panel.BarcodeId == null)
// return null;
//比對方式有兩種，不一定要像舊版需要強制
}
catch (Exception exception)
{
Log4.PrinterLogger.ErrorFormat("INOTIS Printer Data Pasre Exception: {0}", filepath);
Log4.PrinterLogger.ErrorFormat("Message: {0}", exception.Message);
return(null);
}
return(ret);
}
private XElement PANEL_SECTION(InspectedPanel currentPanel, Hanwha_PrinterData data)
{
List <FiducialMark> fidList = currentPanel.Panel.FiducialMarks;
XElement ret = new XElement(
"PANEL",
new XElement("PanelId", "0"),//Panel ID 取流水碼
new XElement("BarcodeId", currentPanel.Panel.PanelBarcode),
new XElement("Stencil", new XAttribute("thickness", "0.100")),
new XElement("PanelSize", new XAttribute("width", currentPanel.Panel.FullCadRect.Width * 0.001), new XAttribute("height", currentPanel.Panel.FullCadRect.Height * 0.001)), //單位mm [has confirmed] SPI是um
new XElement("Fiducials",
from fid in fidList
select new XElement("Fiducial", new XAttribute("id", fidList.IndexOf(fid)),
new XAttribute("pos_x", fid.CadRect.Location.X * 0.001), //單位mm [has confirmed] SPI是um
new XAttribute("pos_y", fid.CadRect.Location.Y * 0.001)) //單位mm [has confirmed] SPI是um
)
);
return(ret);
}
public override object Match(InspectedPanel currentPanel)
{
Hanwha_PrinterData tmpTool = new Hanwha_PrinterData();
return((Hanwha_PrinterData)Match(currentPanel, (IParser)tmpTool, WatchedFolder));
}