/// <summary>
/// Atthis stage it plots and writes to richtext. Should change it.
/// </summary>
/// <param name="pcu">value from pcu</param>
/// <param name="powermeter">value from power meter</param>
/// <param name="cnf">configured value by the test</param>
/// <param name="chartarea">The chart area name where data should go</param>
/// <param name="FS">the fulscale value used for accuracy</param>
/// <param name="filter_mask">the mask to filter plotted values</param>
private void plot_general(string pcu, string powermeter, string cnf, string chartarea, float persent_fail_margin, List <float> filter_mask,
List <float> maskVdccnf)
{
List <string> valuesforreport = new List <string>()
{
"Wacvarconfigured", "Wacconfigured", "Wdcconfigured", "Vdcconfigured",
"Phaseconfigured", "Temperature", "Vacpowermeter"
};
//clear series and add the series
//chart3.Series.Clear();
//Get the column float values: (cnf is configured values)
List <float> CNF = getfloatlist(cnf);
List <float> PM = getfloatlist(powermeter);
List <float> PCU = getfloatlist(pcu);
//Get the bool fail list for specific margins (The ones are percentage 1)
//convert double from the numericUpDown to float
float failpersentage = persent_fail_margin;
List <bool> accuracyfaillist = new List <bool>(Calculate.Pesentage_faillist(PCU, PM, failpersentage));
//**************************Setup chart4********************************************************
addlist_series_tochart(chart4, new List <string>()
{
pcu
});
setupseriesline(chart4.Series[pcu]); //setup the color and the line type plot
chart4.Series[pcu].Points.AddXY(0, 0); //Add the first dot to the line
//******************************End chart 4 setup***********************************************
//*****************************Setup chart 3****************************************************
addlist_series_tochart(chart3, new List <string> {
pcu, powermeter, cnf
});
//List<bool> accuracyfaillist = new List<bool>(Calculate.Faillist(PCU, PM, 1, FS, 1));
chart3.Series[powermeter].ChartArea = chartarea;
chart3.Series[cnf].ChartArea = chartarea;
setupseriescross(chart3.Series[cnf]);
setupseriescircle(chart3.Series[powermeter]);
//****************************End setup chart 3*************************************************
//Add a litte heading to the richtextbob
richTextBox1.AppendText("*****************************" + pcu + "**********************************" + "\r\n");
for (int i = 0; i < PM.Count; i++)
{
//ignore the values that is below this value in textbox10 and above textBox13
if (filter_mask[i] > float.Parse(textBox10.Text) && filter_mask[i] < float.Parse(textBox13.Text))
{
//Filter according to Vcnf
if (maskVdccnf[i] > float.Parse(textBox5.Text) && maskVdccnf[i] < float.Parse(textBox6.Text))
{
if (accuracyfaillist[i] == false)
{
if (CSVrowManager.GetaCSVrow(i) != null)
{
//Append text to the richtext box
richTextBox1.AppendText(CSVrowManager.GetaCSVrow(i).Humantext(valuesforreport) + "\r\n");
//Add point to the chart
chart3.Series[powermeter].Points.AddY(PM[i]);
chart3.Series[cnf].Points.AddY(CNF[i]);
//**************************CHART4*************************
//Add bug plot to the line plot
chart4.Series[pcu].Points.AddXY(i, 0);
chart4.Series[pcu].Points.AddXY(i, 3);
chart4.Series[pcu].Points.AddXY(i, 0);
//**********************Accumulate bugs to Chart 4****************
//if the series is empty then add something
if (chart4.Series["Accumulate"].Points.Count == 0)
{
chart4.Series["Accumulate"].Points.AddXY(0, 0);
}
//If the series is empty then add something
DataPoint datapoint = chart4.Series["Accumulate"].Points.FindByValue(i, "X", 0);//o is start index
if (datapoint == null)
{
chart4.Series["Accumulate"].Points.AddXY(i, 1);
}
else
{
datapoint.SetValueY(datapoint.YValues.Last() + 1);
}
}
}
}
}
}
setbackground(chart3.Series[powermeter], chartarea);
}
/// <summary>
/// calculate the aparant current, Iacs current measured by the pcu components
/// </summary>
/// <param name="pcureal"></param>
/// <param name="powermeter"></param>
/// <param name="reactive"></param>
/// <param name="chartarea"></param>
/// <param name="FS"></param>
private void plot_apparant_current(string pcureal, string powermeter, string reactive, string chartarea, float persent_fail_margin,
List <float> filter_mask, List <float> maskVdccnf)
{
//clear series and add the series
//chart3.Series.Clear();
//get the powermeter float values
List <float> PM = getfloatlist(powermeter);
//Calculate tthe aparant ac current list from the pcu
List <float> appartcurrent = new List <float>
(Calculate.Get_pcu_apparantcurrent(getfloatlist(reactive), getfloatlist(pcureal)));
//**************************Setup chart4********************************************************
// setup_chart4axes(chart4);
addlist_series_tochart(chart4, new List <string>()
{
pcureal, "Accumulate"
});
setupseriesline(chart4.Series[pcureal]); //setup the color and the line type plot
chart4.Series[pcureal].Points.AddXY(0, 0); //Add the first dot to the line
//******************************End chart 4 setup***********************************************
//**************************Setup chart3********************************************************
//setup series names to be added to chart3
List <string> series = new List <string> {
powermeter, "pcuIacs"
};
addlist_series_tochart(chart3, new List <string> {
powermeter, "pcuIacs"
});
//Get the bool fail list for specific margins (The ones are percentage 1)
// List<bool> accuracyfaillist = new List<bool>(Calculate.Faillist(appartcurrent, PM, 1, FS, 1));
List <bool> accuracyfaillist = new List <bool>(Calculate.Pesentage_faillist(appartcurrent, PM, persent_fail_margin));
chart3.Series[powermeter].ChartArea = chartarea;
chart3.Series["pcuIacs"].ChartArea = chartarea;
setupseriescross(chart3.Series["pcuIacs"]);
setupseriescircle(chart3.Series[powermeter]);
for (int i = 0; i < PM.Count; i++)
{
//ignore the values that is below this value in textbox10 and above textBox13
if (filter_mask[i] > float.Parse(textBox10.Text) && filter_mask[i] < float.Parse(textBox13.Text))
{
//Filter according to Vcnf
if (maskVdccnf[i] > float.Parse(textBox5.Text) && maskVdccnf[i] < float.Parse(textBox6.Text))
{
if (accuracyfaillist[i] == false)
{
//Vdcvbuglist.Addbug(CSVrowManager.GetaCSVrow(i));
chart3.Series[powermeter].Points.AddY(PM[i]);
chart3.Series["pcuIacs"].Points.AddY(appartcurrent[i]);
//**************************CHART4 load point*************************
//Add bug plot to the line plot
chart4.Series[pcureal].Points.AddXY(i, 0);
chart4.Series[pcureal].Points.AddXY(i, 3);
chart4.Series[pcureal].Points.AddXY(i, 0);
//**********************Accumulate bugs to Chart 4****************
//if the series is empty then add something
if (chart4.Series["Accumulate"].Points.Count == 0)
{
chart4.Series["Accumulate"].Points.AddXY(0, 0);
}
//If the series is empty then add something
DataPoint datapoint = chart4.Series["Accumulate"].Points.FindByValue(i, "X", 0);//o is start index
if (datapoint == null)
{
chart4.Series["Accumulate"].Points.AddXY(i, 1);
}
else
{
datapoint.SetValueY(datapoint.YValues.Last() + 1);
}
}
}
}
}
setbackground(chart3.Series[powermeter], chartarea);
}
/// <summary>
/// This function gets called by button press
/// Plots the Var vs real power triangle
/// This plot is a special plot. It plot the ractive power
/// triangles and writest to the richtextbox.
/// </summary>
private async void async_col_sequenceplot()
{
//Clear all the data points
if (chart3.Series != null)
{
foreach (Series s in chart3.Series)
{
clearseries(s);
}
}
//Clear all the data points
if (chart4.Series != null)
{
foreach (Series s in chart4.Series)
{
clearseries(s);
}
}
//enter a dalay for user feedback to show chart is updated
await Task.Delay(100);
//chart3.Titles.Clear();
//AC plots Below are the values for chart one, Wacpm also used for filter
List <float> Wacpm = getfloatlist("Wacpowermeter");
//Filter mask, Get a masked value, this will be mask2!!!!!!
List <float> maskVdccnf = getfloatlist("Vdcconfigured");
//List<float> Wacpm = new List<float>(colobjinterflist.First(item => item.GetName() == "Wacpowermeter").GetFloats());
List <float> Wvarpm = getfloatlist("ACvarpowermeter");
List <float> Waccnf = getfloatlist("Wacconfigured");
List <float> Wvarcnf = getfloatlist("Wacvarconfigured");
//never plot these just use them to determine accuracy
List <float> WACpcu = getfloatlist("Wacpcu");
List <float> WACimagpcu = getfloatlist("Wacimagpcu");
//Get a bool fail list to do selective plotting
List <bool> accuracyfaillist = new List <bool>
(Calculate.Faillist(WACpcu, Wacpm, 1, float.Parse(textBox9.Text), 1));
List <bool> accuracyfaillistvar = new List <bool>
(Calculate.Faillist(WACimagpcu, Wvarpm, 1, float.Parse(textBox9.Text), 1));
//this is independent of plot
List <string> valuesforreport = new List <string>()
{
"Wacvarconfigured", "Wacconfigured", "Wdcconfigured", "Vdcconfigured",
"Phaseconfigured", "Temperature", "Vacpowermeter"
};
//clear value everytime button calls this function
List <string> listofseries = new List <string>()
{
"Wacpowermeter", "Wacconfigured"
};
// Create a list of values to extract, alias names from xml
//**************************Setup chart3***************************************************
//chart3.Series.Clear();
//AC plots Set up axis variables
setup_chart3axes(chart3);
addlist_series_tochart(chart3, listofseries);
Series Waccnfseries = chart3.Series["Wacconfigured"];
Series Wacpowermeter = chart3.Series["Wacpowermeter"];
//**************************Setup chart4***************************************************
setup_chart4axes(chart4, Wvarpm.Count);
addlist_series_tochart(chart4, new List <string>()
{
"Wacpowermeter", "Accumulate"
});
setupseriesline(chart4.Series["Wacpowermeter"]); //setup the color and the line type plot
setupseriescross(chart4.Series["Accumulate"]); //setup the color and the line type plot
chart4.Series["Wacpowermeter"].Points.AddXY(0, 0); //Add the first dot to the line
//******************************End chart 4 setup***********************************************
//var and watt
setupseriesline(Wacpowermeter);
setupseriescross(Waccnfseries);
//**END configure series**
//Inititalise classes for different bugs, the int is the chartarea number
//Bugs class contains a list of text bugrows
Wacpowerbuglist = new Bugs(0);
Vdcvbuglist = new Bugs(1);
Idcvbuglist = new Bugs(2);
Vacbuglist = new Bugs(3);
List <Bugs> Bugslist = new List <Bugs>()
{
Wacpowerbuglist
};
//loop trough a series to cover every value
for (int i = 0; i < Wacpm.Count; i++)
{
//This will have to stay a special plot
if (accuracyfaillist[i] == false || accuracyfaillistvar[i] == false)
{
//ignore the values that is below this value in textbox10 and above textBox13
if (Wacpm[i] > float.Parse(textBox10.Text) && Wacpm[i] < float.Parse(textBox13.Text))
{
//Filter according to Vcnf
if (maskVdccnf[i] > float.Parse(textBox5.Text) && maskVdccnf[i] < float.Parse(textBox6.Text))
{
Wacpowerbuglist.Addbug(CSVrowManager.GetaCSVrow(i));
//Plot the congfigured w/va powermeter values
Wacpowermeter.Points.AddXY(0, 0);
Wacpowermeter.Points.AddXY(Wacpm[i], 0);
Wacpowermeter.Points.AddXY(Wacpm[i], Wvarpm[i]);
Wacpowermeter.Points.AddXY(0, 0);
////Plot the congfigured w/va configured values
Waccnfseries.Points.AddXY(Waccnf[i], 0);
Waccnfseries.Points.AddXY(Waccnf[i], Wvarcnf[i]);
//**************************CHART4*************************
//Add bug plot to the line plot
chart4.Series["Wacpowermeter"].Points.AddXY(i, 0);
chart4.Series["Wacpowermeter"].Points.AddXY(i, 3);
chart4.Series["Wacpowermeter"].Points.AddXY(i, 0);
//**********************Accumulate bugs to Chart 4*********
//if the series is empty then add something
if (chart4.Series["Accumulate"].Points.Count == 0)
{
chart4.Series["Accumulate"].Points.AddXY(0, 0);
}
DataPoint datapoint = chart4.Series["Accumulate"].Points.FindByValue(i, "X", 0);//o is start index
if (datapoint == null)
{
//chart4.Series["Accumulate"].Points.AddXY(i, 0);
chart4.Series["Accumulate"].Points.AddXY(i, 1);
//chart4.Series["Accumulate"].Points.AddXY(i, 0);
}
else
{
datapoint.SetValueY(datapoint.YValues.Last() + 1);
}
}
}
}
}
//clear the richtext box
richTextBox1.Clear();
//hunt bugs kicks of a series of bug plots with Wacpm as the filter list
huntbugs(Wacpm, maskVdccnf);
//Writes to richtext box, this needs to be function
printbugs(Bugslist);
}