// This method will be called when the thread is started.
public void DoWork()
{
PiMakerEditor ed = Main.main.editor;
Stopwatch sw = new Stopwatch();
sw.Start();
visual = new GCodeVisual();
visual.showSelection = true;
switch (ed.ShowMode)
{
case 0:
visual.minLayer = 0;
visual.maxLayer = 999999;
break;
case 1:
visual.minLayer = visual.maxLayer = ed.ShowMinLayer;
break;
case 2:
visual.minLayer = ed.ShowMinLayer;
visual.maxLayer = ed.ShowMaxLayer;
break;
}
visual.parseGCodeShortArray(Main.main.previewArray0, true, 0);
visual.parseGCodeShortArray(Main.main.previewArray1, false, 1);
visual.parseGCodeShortArray(Main.main.previewArray2, false, 2);
Main.main.previewArray0 = Main.main.previewArray1 = Main.main.previewArray2 = null;
visual.Reduce();
Main.main.gcodePrintingTime = visual.ana.printingTime;
//visual.stats();
Main.main.newVisual = visual;
Main.main.jobPreviewThreadFinished = true;
Main.main.previewThread = null;
sw.Stop();
//Main.conn.log("Update time:" + sw.ElapsedMilliseconds, false, 3);
}
private void timer_Tick(object sender, EventArgs e)
{
if (newVisual != null)
{
jobPreview.models.RemoveLast();
jobVisual.Clear();
jobVisual = newVisual;
jobPreview.models.AddLast(jobVisual);
threedview.UpdateChanges();
newVisual = null;
editor.toolUpdating.Text = "";
if (Main.main.gcodePrintingTime > 0)
{
Main.main.editor.printingTime = Main.main.gcodePrintingTime;
int sec = (int)(Main.main.editor.printingTime * (1 + 0.01 * Main.conn.addPrintingTime));
int hours = sec / 3600;
sec -= 3600 * hours;
int min = sec / 60;
sec -= min * 60;
StringBuilder s = new StringBuilder();
if (hours > 0)
s.Append(Trans.T1("L_TIME_H:", hours.ToString())); //"h:");
if (min > 0)
s.Append(Trans.T1("L_TIME_M:", min.ToString()));
s.Append(Trans.T1("L_TIME_S", sec.ToString()));
Main.main.editor.toolPrintingTime.Text = Trans.T1("L_PRINTING_TIME:", s.ToString());
}
editor.UpdateLayerInfo();
editor.MaxLayer = editor.getContentArray(0).Last<GCodeShort>().layer;
}
if (recalcJobPreview && jobPreviewThreadFinished)
{
previewArray0 = new List<GCodeShort>();
previewArray1 = new List<GCodeShort>();
previewArray2 = new List<GCodeShort>();
previewArray0.AddRange(((PiMakerEditor.Content)editor.toolFile.Items[1]).textArray);
previewArray1.AddRange(((PiMakerEditor.Content)editor.toolFile.Items[0]).textArray);
previewArray2.AddRange(((PiMakerEditor.Content)editor.toolFile.Items[2]).textArray);
recalcJobPreview = false;
jobPreviewThreadFinished = false;
JobUpdater workerObject = new JobUpdater();
editor.toolUpdating.Text = Trans.T("L_UPDATING..."); // "Updating ...";
previewThread = new Thread(workerObject.DoWork);
previewThread.Start();
}
if (refreshCounter > 0)
{
if (--refreshCounter == 0)
{
Invalidate();
}
}
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
PiMakerKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\PiMaker");
PiMakerKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
PiMakerKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
trans = new Trans(Application.StartupPath + Path.DirectorySeparatorChar + "data" + Path.DirectorySeparatorChar + "translations");
SwitchButton.imageOffset = RegMemory.GetInt("onOffImageOffset", 0);
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
conn.analyzer.start();
threeDSettings = new ThreeDSettings();
InitializeComponent();
editor = new PiMakerEditor();
editor.Dock = DockStyle.Fill;
tabGCode.Controls.Add(editor);
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width - 470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
stlComposer1 = new STLComposer();
stlComposer1.Dock = DockStyle.Fill;
tabModel.Controls.Add(stlComposer1);
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
showWorkdirectoryToolStripMenuItem.Visible = false;
new SoundConfig();
stlComposer1.buttonSlice.Text = Trans.T1("L_SLICE_WITH", slicer.SlicerName);
// Customizations
if (Custom.GetBool("removeTestgenerator", false))
{
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
if (titleAdd.Length > 0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
if (Custom.GetBool("removeUpdates", false))
checkForUpdatesToolStripMenuItem.Visible = false;
else
RHUpdater.checkForUpdates(true);
UpdateToolbarSize();
// Add languages
foreach (Translation t in trans.translations.Values)
{
ToolStripMenuItem item = new ToolStripMenuItem(t.language, null, languageSelected);
item.Tag = t;
languageToolStripMenuItem.DropDownItems.Add(item);
}
languageChanged += translate;
translate();
toolAction.Text = Trans.T("L_IDLE");
toolConnection.Text = Trans.T("L_DISCONNECTED");
}
