/// <summary>
/// Read() reads from an offset in the file. A PP_ArrayOutput must be
/// provided so that output will be stored in its allocated buffer. This
/// function might perform a partial read.
/// </summary>
/// <param name="buffer">An ArraySegment<byte> to hold the specified number of bytes read.</param>
/// <param name="offset">The offset into the file.</param>
/// <param name="bytesToRead">The number of bytes to read from <code>offset</code>.</param>
/// <returns>Error code. If the return value is 0, then end-of-file was reached.</returns>
public PPError Read(ArraySegment <byte> buffer, int offset, int bytesToRead)
{
var readToArrayAction = new Action <PPError, byte[]>(
(result, bytes) =>
{
Array.Copy(bytes, buffer.Array, Math.Min(bytes.Length, buffer.Count));
OnReadData(result);
}
);
var arrayOutput = new CompletionCallbackWithOutput <byte[]>(new CompletionCallbackWithOutputFunc <byte[]>(readToArrayAction));
return((PPError)PPBFileIO.ReadToArray(this, offset, bytesToRead, ref arrayOutput.ArrayOutput, arrayOutput));
}
private async Task <FileIOResult> ReadAsyncCore(ArraySegment <byte> buffer, int offset, int size, MessageLoop messageLoop = null)
{
var tcs = new TaskCompletionSource <FileIOResult>();
EventHandler <FileIOResult> handler = (s, e) => { tcs.TrySetResult(e); };
try
{
HandleReadData += handler;
if (MessageLoop == null && messageLoop == null)
{
Read(buffer, offset, size);
}
else
{
Action <PPError> action = new Action <PPError>((e) =>
{
using (var arrayOutput = new ArrayOutputAdapterWithStorage <byte[]>())
{
PPArrayOutput ao = arrayOutput.PPArrayOutput;
var result = (PPError)PPBFileIO.ReadToArray(this, offset, size, ref ao,
new BlockUntilComplete());
var bytes = arrayOutput.Output;
Array.Copy(bytes, buffer.Array, Math.Min(bytes.Length, buffer.Count));
tcs.TrySetResult(new FileIOResult((int)result, (int)result == 0));
}
}
);
InvokeHelper(action, messageLoop);
}
return(await tcs.Task);
}
catch (Exception exc)
{
Console.WriteLine(exc.Message);
tcs.SetException(exc);
return(new FileIOResult((int)PPError.Aborted, true));
}
finally
{
HandleReadData -= handler;
}
}
private async Task <FileIOResult> WriteAsyncCore(byte[] buffer, int offset, int size, MessageLoop messageLoop = null)
{
var tcs = new TaskCompletionSource <FileIOResult>();
EventHandler <FileIOResult> handler = (s, e) => { tcs.TrySetResult(e); };
try
{
HandleWriteData += handler;
if (MessageLoop == null && messageLoop == null)
{
Write(buffer, offset, size);
}
else
{
Action <PPError> action = new Action <PPError>((e) =>
{
var result = (PPError)PPBFileIO.Write(this, offset,
buffer,
size,
new BlockUntilComplete()
);
tcs.TrySetResult(new FileIOResult((int)result, (int)result == 0));
}
);
InvokeHelper(action, messageLoop);
}
return(await tcs.Task);
}
catch (Exception exc)
{
Console.WriteLine(exc.Message);
tcs.SetException(exc);
return(new FileIOResult((int)PPError.Aborted, true));
}
finally
{
HandleWriteData -= handler;
}
}
private async Task <FileInfo> QueryAsyncCore(MessageLoop messageLoop = null)
{
var tcs = new TaskCompletionSource <FileInfo>();
EventHandler <FileInfo> handler = (s, e) => { tcs.TrySetResult(e); };
try
{
HandleQuery += handler;
if (MessageLoop == null && messageLoop == null)
{
Query();
}
else
{
Action <PPError> action = new Action <PPError>((e) =>
{
var fileInfo = new PPFileInfo();
var result = (PPError)PPBFileIO.Query(this, out fileInfo,
new BlockUntilComplete()
);
tcs.TrySetResult(new FileInfo(result, fileInfo));
}
);
InvokeHelper(action, messageLoop);
}
return(await tcs.Task);
}
catch (Exception exc)
{
Console.WriteLine(exc.Message);
tcs.SetException(exc);
return(new FileInfo(PPError.Aborted, new PPFileInfo()));
}
finally
{
HandleQuery -= handler;
}
}
private async Task <PPError> OpenAsyncCore(FileRef fileRef, FileOpenFlags openFlags, MessageLoop openLoop = null)
{
var tcs = new TaskCompletionSource <PPError>();
EventHandler <PPError> handler = (s, e) => { tcs.TrySetResult(e); };
try
{
HandleOpen += handler;
if (MessageLoop == null && openLoop == null)
{
Open(fileRef, openFlags);
}
else
{
Action <PPError> action = new Action <PPError>((e) =>
{
var result = (PPError)PPBFileIO.Open(this, fileRef, (int)openFlags,
new BlockUntilComplete()
);
tcs.TrySetResult(result);
}
);
InvokeHelper(action, openLoop);
}
return(await tcs.Task);
}
catch (Exception exc)
{
Console.WriteLine(exc.Message);
tcs.SetException(exc);
return(PPError.Aborted);
}
finally
{
HandleOpen -= handler;
}
}
private async Task <PPError> FlushAsyncCore(MessageLoop messageLoop = null)
{
var tcs = new TaskCompletionSource <PPError>();
EventHandler <PPError> handler = (s, e) => { tcs.TrySetResult(e); };
try
{
HandleFlush += handler;
if (MessageLoop == null && messageLoop == null)
{
Flush();
}
else
{
Action <PPError> action = new Action <PPError>((e) =>
{
var result = (PPError)PPBFileIO.Flush(this,
new BlockUntilComplete()
);
tcs.TrySetResult(result);
}
);
InvokeHelper(action, messageLoop);
}
return(await tcs.Task);
}
catch (Exception exc)
{
Console.WriteLine(exc.Message);
tcs.SetException(exc);
return(PPError.Aborted);
}
finally
{
HandleFlush -= handler;
}
}
private async Task <PPError> CloseAsyncCore(MessageLoop messageLoop = null)
{
var tcs = new TaskCompletionSource <PPError>();
EventHandler <PPError> handler = (s, e) => { tcs.TrySetResult(e); };
try
{
HandleClose += handler;
if (MessageLoop == null && messageLoop == null)
{
Close();
}
else
{
Action <PPError> action = new Action <PPError>((e) =>
{
PPBFileIO.Close(this);
tcs.TrySetResult(PPError.Ok);
}
);
InvokeHelper(action, messageLoop);
}
return(await tcs.Task);
}
catch (Exception exc)
{
Console.WriteLine(exc.Message);
tcs.SetException(exc);
return(PPError.Aborted);
}
finally
{
HandleClose -= handler;
}
}
/// <summary>
/// Close() cancels any IO that may be pending, and closes the FileIO object.
/// Any pending callbacks will still run, reporting
/// <code>Aborted</code> if pending IO was interrupted. It is not
/// valid to call Open() again after a call to this method.
///
/// <strong>Note:</strong> If the FileIO object is destroyed, and it is still
/// open, then it will be implicitly closed, so you are not required to call
/// Close().
/// </summary>
public void Close()
{
PPBFileIO.Close(this);
OnClose(PPError.Ok);
}
/// <summary> /// Open() opens the specified regular file for I/O according to the given /// open flags, which is a bit-mask of the FileOpenFlags values. Upon /// success, the corresponding file is classified as "in use" by this FileIO /// object until such time as the FileIO object is closed or destroyed. /// </summary> /// <param name="fileRef">A FileRef instance</param> /// <param name="openFlags">A bit-mask of <code>FileOpenFlags</code> values.</param> /// <returns>Error code</returns> public PPError Open(FileRef fileRef, FileOpenFlags openFlags) => (PPError)PPBFileIO.Open(this, fileRef, (int)openFlags, new CompletionCallback(OnOpen));
/// <summary> /// Flush() flushes changes to disk. This call can be very expensive! /// </summary> /// <returns>Error code.</returns> public PPError Flush() => (PPError)PPBFileIO.Flush(this, new CompletionCallback(OnFlush));
/// <summary> /// SetLength() sets the length of the file. If the file size is extended, /// then the extended area of the file is zero-filled. The FileIO object must /// have been opened with write access. /// </summary> /// <param name="length">The length of the file to be set.</param> /// <returns></returns> public PPError SetLength(long length) => (PPError)PPBFileIO.SetLength(this, length, new CompletionCallback(OnSetLength));
/// <summary> /// Write() writes to an offset in the file. This function might perform a /// partial write. The FileIO object must have been opened with write access. /// </summary> /// <param name="buffer">The buffer to hold the specified number of bytes read.</param> /// <param name="offset">The offset into the file.</param> /// <param name="bytesToWrite">The number of bytes to write to /// <code>offset</code>.</param> /// <returns>Error code</returns> public PPError Write(byte[] buffer, int offset, int bytesToWrite) => (PPError)PPBFileIO.Write(this, offset, buffer, bytesToWrite, new CompletionCallback(OnWriteData));
public FileIO(Instance instance)
{
handle = PPBFileIO.Create(instance);
}
/// <summary> /// Reads from an offset in the file. /// /// The size of the buffer must be large enough to hold the specified number /// of bytes to read. This function might perform a partial read, meaning /// that all the requested bytes might not be returned, even if the end of the /// file has not been reached. /// /// This function reads into a buffer that the caller supplies. This buffer /// must remain valid as long as the FileIO resource is alive. If you use /// a completion callback factory and it goes out of scope, it will not issue /// the callback on your class, BUT the callback factory can NOT cancel /// the request from the browser's perspective. This means that the browser /// will still try to write to your buffer even if the callback factory is /// destroyed! /// /// So you must ensure that your buffer outlives the FileIO resource. If you /// have one class and use the FileIO resource exclusively from that class /// and never make any copies, this will be fine: the resource will be /// destroyed when your class is. But keep in mind that copying a pp::FileIO /// object just creates a second reference to the original resource. For /// example, if you have a function like this: /// FileIO MyClass.GetFileIO(); /// where a copy of your FileIO resource could outlive your class, the /// callback will still be pending when your class goes out of scope, creating /// the possibility of writing into invalid memory. So it's recommended to /// keep your FileIO resource and any output buffers tightly controlled in /// the same scope. /// /// <strong>Caveat:</strong> This Read() is potentially unsafe if you're using /// an EventHandler to scope callbacks to the lifetime of your /// class. When your class goes out of scope, the native callback factory will not /// actually cancel the callback, but will rather just skip issuing the /// callback on your class. This means that if the FileIO object outlives /// your class (if you made a copy saved somewhere else, for example), then /// the browser will still try to write into your buffer when the /// asynchronous read completes, potentially causing a crash. /// /// See the other version of Read() which avoids this problem by writing into /// ArraySegment, where the output buffer is automatically managed by the native callback. /// /// </summary> /// <param name="buffer">The buffer to hold the specified number of bytes read.</param> /// <param name="offset">The offset into the file.</param> /// <param name="bytesToRead">The number of bytes to read from <code>offset</code>.</param> /// <returns>Error code. If the return value is 0, then end-of-file was /// reached.</returns> public PPError Read(byte[] buffer, int offset, int bytesToRead) => (PPError)PPBFileIO.Read(this, offset, buffer, bytesToRead, new CompletionCallback(OnReadData));
/// <summary>
/// Query() queries info about the file opened by this FileIO object. This
/// function will fail if the FileIO object has not been opened.
/// </summary>
/// <returns>Error code</returns>
public PPError Query()
{
var ficb = new CompletionCallbackWithOutput <PPFileInfo>(OnQuery);
return((PPError)PPBFileIO.Query(this, out ficb.OutputAdapter.output, ficb));
}