} // cmbTNCtype_TextChanged
private void btnAdd_Click(object sender, EventArgs e)
{
if (!Globals.IsValidFileName(cmbChannelName.Text))
{
cmbChannelName.Focus();
return;
}
cmbChannelName.Text = cmbChannelName.Text.Trim();
cmbChannelName.Text = cmbChannelName.Text.Replace("|", "");
if (chkAutoforwardEnabled.Checked)
{
ConfirmAutoforward();
}
if (Channels.IsAccount(cmbChannelName.Text))
{
MessageBox.Show(cmbChannelName.Text + " is in use as an account name...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
cmbChannelName.Focus();
return;
}
int audioFreq = 0;
if (!int.TryParse(txtAudioCenter.Text.Trim(), out audioFreq))
{
MessageBox.Show("Audio Tones Center must be between 1000 and 2300 Hz", "Tone Center Error", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
return;
}
if (audioFreq < 1000 || audioFreq > 2300)
{
MessageBox.Show("Audio Tones Center must be between 1000 and 2300 Hz", "Tone Center Error", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
return;
}
if (txtRadioAddress.Enabled)
{
try
{
byte byt = byte.Parse(txtRadioAddress.Text.ToUpper().Trim(), System.Globalization.NumberStyles.HexNumber);
}
catch
{
MessageBox.Show("Radio Address must be between 00 and FF hex", "Radio Address Error", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
return;
}
}
if (rdoSerial.Checked & (cmbRadioPort.Text ?? "") == (cmbTNCSerialPort.Text ?? ""))
{
MessageBox.Show("Radio Control and TNC must use different serial ports.", "Serial Port Conflict", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
if (Channels.IsChannel(cmbChannelName.Text))
{
MessageBox.Show("The channel name " + cmbChannelName.Text + " is already in use...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
cmbChannelName.Focus();
}
else
{
var stcNewChannel = default(TChannelProperties);
UpdateChannelProperties(ref stcNewChannel);
Channels.AddChannel(ref stcNewChannel);
Channels.FillChannelCollection();
FillChannelList();
Globals.Settings.Save("Properties", "Last Pactor Channel", cmbChannelName.Text);
btnAdd.Enabled = false;
btnRemove.Enabled = true;
btnUpdate.Enabled = true;
// Me.Close()
}
} // btnAdd_Click
public PrimaryThread()
{
//
// Initializes the program on startup...
//
int intIndex = Globals.Settings.Get("Properties", "Default Local IP Address Index", 0);
if (intIndex < 0)
{
intIndex = 0;
}
if (Globals.strLocalIPAddresses.Length - 1 >= intIndex)
{
Globals.strLocalIPAddress = Globals.strLocalIPAddresses[intIndex];
}
Globals.SiteCallsign = Globals.Settings.Get("Properties", "Site Callsign", "");
Globals.SiteGridSquare = Globals.Settings.Get("Properties", "Grid Square", "");
Globals.intSMTPPortNumber = Globals.Settings.Get("Properties", "SMTP Port Number", 25);
Globals.intPOP3PortNumber = Globals.Settings.Get("Properties", "POP3 Port Number", 110);
Globals.blnLAN = Globals.Settings.Get("Properties", "LAN Connection", true);
Globals.blnEnableRadar = Globals.Settings.Get("Properties", "Enable Radar", false);
Globals.strServiceCodes = Globals.Settings.Get("Properties", "ServiceCodes", "");
if (string.IsNullOrEmpty(Globals.strServiceCodes))
{
if (Globals.IsMARSCallsign(Globals.SiteCallsign))
{
Globals.strServiceCodes = Globals.strMARSServiceCode;
}
else
{
Globals.strServiceCodes = Globals.strHamServiceCode;
}
Globals.Settings.Save("Properties", "ServiceCodes", Globals.strServiceCodes);
}
string strSitePassword = Globals.Settings.Get("Properties", "Site Password", "");
Globals.POP3Password = Globals.Settings.Get("Properties", "EMail Password", strSitePassword);
Globals.Settings.Save("Properties", "EMail Password", Globals.POP3Password);
Globals.Settings.Save("Properties", "Site Password", "");
Globals.SecureLoginPassword = Globals.Settings.Get("Properties", "Secure Login Password", "");
Channels.FillChannelCollection();
try
{
Globals.PollingData.LoadParameters();
}
catch (Exception ex)
{
_log.Error("[Main.Startup C] " + ex.Message);
}
try
{
// Open the properties dialog box if no initial configuration has been set...
DialogSitePropertiesViewModel vm = new DialogSitePropertiesViewModel();
if (vm.IsCallsignAndGridSquareValid() == false)
{
UserInterfaceFactory.GetUiSystem().DisplayForm(AvailableForms.SiteProperties, vm);
if (vm.IsCallsignAndGridSquareValid() == false)
{
MessageBox.Show("Paclink must have a valid initial configuration to continue...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
MyApplication.Forms.Main.CloseWindow();
return;
}
}
}
catch (Exception ex)
{
_log.Error("[Main.Startup F] " + ex.Message);
}
try
{
Accounts.RefreshAccountsList();
}
catch (Exception ex)
{
_log.Error("[Main.Startup G] " + ex.Message);
}
try
{
MyApplication.Forms.Main.UpdateChannelList();
}
catch (Exception ex)
{
_log.Error("[Main.Startup G] " + ex.Message);
}
MyApplication.Forms.Main.UpdateSiteCallsign(Globals.SiteCallsign);
if (Globals.UseRMSRelay())
{
Globals.queChannelDisplay.Enqueue("G*** Paclink is set to connect to RMS Relay.");
}
if (Globals.blnForceHFRouting)
{
Globals.queChannelDisplay.Enqueue("G*** Paclink is set to send messages via radio-only forwarding.");
}
Globals.queChannelDisplay.Enqueue("G*** Paclink " + Application.ProductVersion + " ready...");
MyApplication.Forms.Main.EnableMainWindowInterface();
if (thrSMTP != null)
{
_abortSMTPThread = true;
thrSMTP.Join();
thrSMTP = null;
}
thrSMTP = new Thread(SMTPThread);
thrSMTP.Name = "SMTP";
thrSMTP.Start();
if (thrChannel != null)
{
_abortChannelThread = true;
thrChannel.Join();
thrChannel = null;
}
thrChannel = new Thread(ChannelThread);
thrChannel.Name = "Channel";
thrChannel.Start();
}
} // btnBrowseConfiguration_Click
private void btnAdd_Click(object sender, EventArgs e)
{
if (!Globals.IsValidFileName(cmbChannelName.Text))
{
cmbChannelName.Focus();
return;
}
cmbChannelName.Text = cmbChannelName.Text.Trim();
cmbChannelName.Text = cmbChannelName.Text.Replace("|", "");
if (string.IsNullOrEmpty(cmbTNCBaudRate.Text.Trim()))
{
MessageBox.Show("Select TNC Baud rate!", "No baud rate selected!", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
if (string.IsNullOrEmpty(cmbOnAirBaud.Text.Trim()))
{
MessageBox.Show("Select On Air Baud rate!", "No baud rate selected!", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
if (Channels.IsAccount(cmbChannelName.Text))
{
MessageBox.Show(cmbChannelName.Text + " is in use as an account name...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
cmbChannelName.Focus();
return;
}
if (rdoManual.Checked == false)
{
if (string.IsNullOrEmpty(cmbRadioModel.Text.Trim()) | string.IsNullOrEmpty(cmbRadioBaud.Text.Trim()) | string.IsNullOrEmpty(cmbRadioPort.Text.Trim()))
{
MessageBox.Show("The parameters for Radio control are not complete!", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
}
if (Channels.IsChannel(cmbChannelName.Text))
{
MessageBox.Show("The channel name " + cmbChannelName.Text + " is already in use...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
cmbChannelName.Focus();
}
else
{
if (!System.IO.File.Exists(txtTNCConfigurationFile.Text))
{
MessageBox.Show("Invalid TNC configuration file.", "File Not Found", MessageBoxButtons.OK, MessageBoxIcon.Information);
txtTNCConfigurationFile.Focus();
return;
}
if (!rdoManual.Checked)
{
if (!Globals.WithinLimits(txtFreqMHz.Text, 2400, 29))
{
MessageBox.Show("Frequency must be in MHz between 29.0 and 2400", "Frequency Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
txtFreqMHz.Focus();
return;
}
if (rdoSerial.Checked & (cmbRadioPort.Text ?? "") == (cmbTNCSerialPort.Text ?? ""))
{
if (!(cmbRadioModel.Text == "Kenwood TS-2000" & cmbTNCType.Text == "TS-2000 int" | cmbRadioModel.Text == "Kenwood TM-D700" & cmbTNCType.Text == "TM-D700 int" | cmbRadioModel.Text == "Kenwood TH-D7" & cmbTNCType.Text == "TH-D7 int"))
{
MessageBox.Show("Radio Control and TNC must use different serial ports.", "Serial Port Conflict", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
}
}
var stcNewChannel = default(TChannelProperties);
UpdateChannelProperties(ref stcNewChannel);
Channels.AddChannel(ref stcNewChannel);
Channels.FillChannelCollection();
FillChannelList();
Globals.Settings.Save("Properties", "Last Packet TNC Channel", cmbChannelName.Text);
}
btnAdd.Enabled = false;
btnRemove.Enabled = true;
btnUpdate.Enabled = true;
// Me.Close()
} // btnAdd_Click
