public static BSShape GetReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
{
float lod;
System.UInt64 newHullKey = BSShape.ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
BSShapeHull retHull = null;
lock (Hulls)
{
if (Hulls.TryGetValue(newHullKey, out retHull))
{
// The mesh has already been created. Return a new reference to same.
retHull.IncrementReference();
}
else
{
retHull = new BSShapeHull(new BulletShape());
// An instance of this mesh has not been created. Build and remember same.
BulletShape newShape = retHull.CreatePhysicalHull(physicsScene, prim, newHullKey, prim.BaseShape, prim.Size, lod);
// Check to see if hull was created (might require an asset).
newShape = VerifyMeshCreated(physicsScene, newShape, prim);
if (!newShape.isNativeShape || prim.AssetFailed())
{
// If a mesh was what was created, remember the built shape for later sharing.
Hulls.Add(newHullKey, retHull);
}
retHull.physShapeInfo = newShape;
}
}
physicsScene.DetailLog("{0},BSShapeHull,getReference,hull={1},size={2},lod={3}", prim.LocalID, retHull, prim.Size, lod);
return retHull;
}
// The creation of a mesh or hull can fail if an underlying asset is not available.
// There are two cases: 1) the asset is not in the cache and it needs to be fetched;
// and 2) the asset cannot be converted (like failed decompression of JPEG2000s).
// The first case causes the asset to be fetched. The second case requires
// us to not loop forever.
// Called after creating a physical mesh or hull. If the physical shape was created,
// just return.
public static BulletShape VerifyMeshCreated(BSScene physicsScene, BulletShape newShape, BSPhysObject prim)
{
// If the shape was successfully created, nothing more to do
if (newShape.HasPhysicalShape)
return newShape;
// VerifyMeshCreated is called after trying to create the mesh. If we think the asset had been
// fetched but we end up here again, the meshing of the asset must have failed.
// Prevent trying to keep fetching the mesh by declaring failure.
if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.Fetched)
{
prim.PrimAssetState = BSPhysObject.PrimAssetCondition.FailedMeshing;
physicsScene.Logger.WarnFormat("{0} Fetched asset would not mesh. prim={1}, texture={2}",
LogHeader, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,setFailed,prim={1},tex={2}",
prim.LocalID, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
}
else
{
// If this mesh has an underlying asset and we have not failed getting it before, fetch the asset
if (prim.BaseShape.SculptEntry
&& !prim.AssetFailed()
&& prim.PrimAssetState != BSPhysObject.PrimAssetCondition.Waiting
&& prim.BaseShape.SculptTexture != OMV.UUID.Zero
)
{
physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,fetchAsset,objNam={1},tex={2}",
prim.LocalID, prim.PhysObjectName, prim.BaseShape.SculptTexture);
// Multiple requestors will know we're waiting for this asset
prim.PrimAssetState = BSPhysObject.PrimAssetCondition.Waiting;
BSPhysObject xprim = prim;
RequestAssetDelegate assetProvider = physicsScene.RequestAssetMethod;
if (assetProvider != null)
{
BSPhysObject yprim = xprim; // probably not necessary, but, just in case.
assetProvider(yprim.BaseShape.SculptTexture, delegate(AssetBase asset)
{
// physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,assetProviderCallback", xprim.LocalID);
bool assetFound = false;
string mismatchIDs = String.Empty; // DEBUG DEBUG
if (asset != null && yprim.BaseShape.SculptEntry)
{
if (yprim.BaseShape.SculptTexture.ToString() == asset.ID)
{
yprim.BaseShape.SculptData = asset.Data;
// This will cause the prim to see that the filler shape is not the right
// one and try again to build the object.
// No race condition with the normal shape setting since the rebuild is at taint time.
yprim.PrimAssetState = BSPhysObject.PrimAssetCondition.Fetched;
yprim.ForceBodyShapeRebuild(false /* inTaintTime */);
assetFound = true;
}
else
{
mismatchIDs = yprim.BaseShape.SculptTexture.ToString() + "/" + asset.ID;
}
}
if (!assetFound)
{
yprim.PrimAssetState = BSPhysObject.PrimAssetCondition.FailedAssetFetch;
}
physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,fetchAssetCallback,found={1},isSculpt={2},ids={3}",
yprim.LocalID, assetFound, yprim.BaseShape.SculptEntry, mismatchIDs );
});
}
else
{
xprim.PrimAssetState = BSPhysObject.PrimAssetCondition.FailedAssetFetch;
physicsScene.Logger.ErrorFormat("{0} Physical object requires asset but no asset provider. Name={1}",
LogHeader, physicsScene.Name);
}
}
else
{
if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.FailedAssetFetch)
{
physicsScene.Logger.WarnFormat("{0} Mesh failed to fetch asset. prim={1}, texture={2}",
LogHeader, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,wasFailed,prim={1},tex={2}",
prim.LocalID, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
}
if (prim.PrimAssetState == BSPhysObject.PrimAssetCondition.FailedMeshing)
{
physicsScene.Logger.WarnFormat("{0} Mesh asset would not mesh. prim={1}, texture={2}",
LogHeader, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,wasFailedMeshing,prim={1},tex={2}",
prim.LocalID, UsefulPrimInfo(physicsScene, prim), prim.BaseShape.SculptTexture);
}
}
}
// While we wait for the mesh defining asset to be loaded, stick in a simple box for the object.
BSShape fillShape = BSShapeNative.GetReference(physicsScene, prim, BSPhysicsShapeType.SHAPE_BOX, FixedShapeKey.KEY_BOX);
physicsScene.DetailLog("{0},BSShape.VerifyMeshCreated,boxTempShape", prim.LocalID);
return fillShape.physShapeInfo;
}
public static BSShape GetReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
{
float lod;
System.UInt64 newMeshKey = BSShape.ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
BSShapeMesh retMesh = null;
lock (Meshes)
{
if (Meshes.TryGetValue(newMeshKey, out retMesh))
{
// The mesh has already been created. Return a new reference to same.
retMesh.IncrementReference();
}
else
{
retMesh = new BSShapeMesh(new BulletShape());
// An instance of this mesh has not been created. Build and remember same.
BulletShape newShape = retMesh.CreatePhysicalMesh(physicsScene, prim, newMeshKey, prim.BaseShape, prim.Size, lod);
// Check to see if mesh was created (might require an asset).
newShape = VerifyMeshCreated(physicsScene, newShape, prim);
if (!newShape.isNativeShape || prim.AssetFailed() )
{
// If a mesh was what was created, remember the built shape for later sharing.
// Also note that if meshing failed we put it in the mesh list as there is nothing else to do about the mesh.
Meshes.Add(newMeshKey, retMesh);
}
retMesh.physShapeInfo = newShape;
}
}
physicsScene.DetailLog("{0},BSShapeMesh,getReference,mesh={1},size={2},lod={3}", prim.LocalID, retMesh, prim.Size, lod);
return retMesh;
}
public static BSShape GetReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
{
float lod;
System.UInt64 newMeshKey = BSShape.ComputeShapeKey(prim.Size, prim.BaseShape, out lod);
physicsScene.DetailLog("{0},BSShapeGImpact,getReference,newKey={1},size={2},lod={3}",
prim.LocalID, newMeshKey.ToString("X"), prim.Size, lod);
BSShapeGImpact retGImpact = null;
lock (GImpacts)
{
if (GImpacts.TryGetValue(newMeshKey, out retGImpact))
{
// The mesh has already been created. Return a new reference to same.
retGImpact.IncrementReference();
}
else
{
retGImpact = new BSShapeGImpact(new BulletShape());
BulletShape newShape = retGImpact.CreatePhysicalGImpact(physicsScene, prim, newMeshKey, prim.BaseShape, prim.Size, lod);
// Check to see if mesh was created (might require an asset).
newShape = VerifyMeshCreated(physicsScene, newShape, prim);
newShape.shapeKey = newMeshKey;
if (!newShape.isNativeShape || prim.AssetFailed())
{
// If a mesh was what was created, remember the built shape for later sharing.
// Also note that if meshing failed we put it in the mesh list as there is nothing
// else to do about the mesh.
GImpacts.Add(newMeshKey, retGImpact);
}
retGImpact.physShapeInfo = newShape;
}
}
return retGImpact;
}