private LineBlock CreateConduitPassThroughBlock()
{
// Create outer conduits
var rootSpanInfo = _spanEquipmentViewModel.RootSpanDiagramInfo("OuterConduit");
var spanEquipmentBlock = new LineBlock()
{
MinWidth = _spanEquipmentAreaWidth,
IsVisible = _spanEquipmentViewModel.IsSingleSpan ? false : true,
Style = rootSpanInfo.StyleName,
Margin = _spanEquipmentViewModel.IsSingleSpan ? 0 : _spanEquipmentBlockMargin,
DrawingOrder = 400
};
spanEquipmentBlock.SetReference(rootSpanInfo.IngoingSegmentId, "SpanSegment");
// Create inner conduits
var innerSpanData = _spanEquipmentViewModel.GetInnerSpanDiagramInfos("InnerConduit");
var fromPort = _spanEquipmentViewModel.IsSingleSpan ?
new BlockPort(BlockSideEnum.West, null, null, 0, -1, 0)
{
IsVisible = false, DrawingOrder = 420
} :
new BlockPort(BlockSideEnum.West)
{
IsVisible = false, DrawingOrder = 420
};
spanEquipmentBlock.AddPort(fromPort);
var toPort = _spanEquipmentViewModel.IsSingleSpan ?
new BlockPort(BlockSideEnum.East, null, null, 0, -1, 0)
{
IsVisible = false, DrawingOrder = 420
} :
new BlockPort(BlockSideEnum.East)
{
IsVisible = false, DrawingOrder = 420
};
spanEquipmentBlock.AddPort(toPort);
int terminalNo = 1;
var orderedinnerSpanData = innerSpanData.OrderBy(i => (1000 - i.Position));
bool innerSpansFound = false;
foreach (var spanInfo in orderedinnerSpanData)
{
var fromTerminal = new BlockPortTerminal(fromPort)
{
IsVisible = true,
ShapeType = TerminalShapeTypeEnum.Point,
PointStyle = "WestTerminalLabel",
PointLabel = _spanEquipmentViewModel.GetIngoingRouteNodeName(spanInfo.SegmentId),
DrawingOrder = 520
};
fromTerminal.SetReference(spanInfo.IngoingSegmentId, "SpanSegment");
var toTerminal = new BlockPortTerminal(toPort)
{
IsVisible = true,
ShapeType = TerminalShapeTypeEnum.Point,
PointStyle = "EastTerminalLabel",
PointLabel = _spanEquipmentViewModel.GetOutgoingRouteNodeName(spanInfo.SegmentId),
DrawingOrder = 520
};
toTerminal.SetReference(spanInfo.OutgoingSegmentId, "SpanSegment");
var terminalConnection = spanEquipmentBlock.AddTerminalConnection(BlockSideEnum.West, 1, terminalNo, BlockSideEnum.East, 1, terminalNo, null, spanInfo.StyleName, LineShapeTypeEnum.Polygon);
terminalConnection.DrawingOrder = 510;
terminalConnection.SetReference(spanInfo.IngoingSegmentId, "SpanSegment");
// Add eventually cable running through inner conduit
if (_spanEquipmentViewModel.Data.ConduitSegmentToCableChildRelations.ContainsKey(spanInfo.SegmentId))
{
var cableId = _spanEquipmentViewModel.Data.ConduitSegmentToCableChildRelations[spanInfo.SegmentId].First();
var fiberCableLineLabel = _spanEquipmentViewModel.Data.GetCableEquipmentLineLabel(cableId);
var cableTerminalConnection = spanEquipmentBlock.AddTerminalConnection(BlockSideEnum.West, 1, terminalNo, BlockSideEnum.East, 1, terminalNo, fiberCableLineLabel, "FiberCable", LineShapeTypeEnum.Line);
cableTerminalConnection.DrawingOrder = 600;
cableTerminalConnection.SetReference(cableId, "SpanSegment");
}
terminalNo++;
innerSpansFound = true;
}
if (!innerSpansFound)
{
var fromTerminal = new BlockPortTerminal(fromPort)
{
IsVisible = true,
ShapeType = TerminalShapeTypeEnum.Point,
PointStyle = "WestTerminalLabel",
PointLabel = _spanEquipmentViewModel.GetIngoingRouteNodeName(rootSpanInfo.SegmentId),
DrawingOrder = 520
};
fromTerminal.SetReference(rootSpanInfo.IngoingSegmentId, "SpanSegment");
var toTerminal = new BlockPortTerminal(toPort)
{
IsVisible = true,
ShapeType = TerminalShapeTypeEnum.Point,
PointStyle = "EastTerminalLabel",
PointLabel = _spanEquipmentViewModel.GetOutgoingRouteNodeName(rootSpanInfo.SegmentId),
DrawingOrder = 520
};
toTerminal.SetReference(rootSpanInfo.OutgoingSegmentId, "SpanSegment");
// If a single conduit
if (_spanEquipmentViewModel.IsSingleSpan)
{
var terminalConnection = spanEquipmentBlock.AddTerminalConnection(BlockSideEnum.West, 1, terminalNo, BlockSideEnum.East, 1, terminalNo, null, rootSpanInfo.StyleName, LineShapeTypeEnum.Polygon);
terminalConnection.DrawingOrder = 510;
terminalConnection.SetReference(rootSpanInfo.SegmentId, "SpanSegment");
// Add eventually cable running through inner conduit
if (_spanEquipmentViewModel.Data.ConduitSegmentToCableChildRelations.ContainsKey(rootSpanInfo.SegmentId))
{
var cableId = _spanEquipmentViewModel.Data.ConduitSegmentToCableChildRelations[rootSpanInfo.SegmentId].First();
var fiberCableLineLabel = _spanEquipmentViewModel.Data.GetCableEquipmentLineLabel(cableId);
var cableTerminalConnection = spanEquipmentBlock.AddTerminalConnection(BlockSideEnum.West, 1, terminalNo, BlockSideEnum.East, 1, terminalNo, fiberCableLineLabel, "FiberCable", LineShapeTypeEnum.Line);
cableTerminalConnection.DrawingOrder = 600;
cableTerminalConnection.SetReference(cableId, "SpanSegment");
}
}
terminalNo++;
}
return(spanEquipmentBlock);
}
private void CreateTerminalForShowingWhereEmptySingleConduitIsHeading(SpanEquipmentViewModel viewModel, BlockPort outerConduitPort)
{
var routeSpanDiagramInfo = viewModel.RootSpanDiagramInfo("OuterConduit");
var terminal = new BlockPortTerminal(outerConduitPort)
{
IsVisible = true,
ShapeType = viewModel.IsSingleSpan ? TerminalShapeTypeEnum.PointAndPolygon : TerminalShapeTypeEnum.Point,
PointStyle = outerConduitPort.Side.ToString() + "TerminalLabel",
PointLabel = viewModel.InterestRelationKind() == RouteNetworkInterestRelationKindEnum.End ? viewModel.GetIngoingRouteNodeName(routeSpanDiagramInfo.SegmentId) : viewModel.GetOutgoingRouteNodeName(routeSpanDiagramInfo.SegmentId),
PolygonStyle = routeSpanDiagramInfo.StyleName,
DrawingOrder = 620
};
terminal.SetReference(routeSpanDiagramInfo.SegmentId, "SpanSegment");
}
private void CreateTerminalsForCablesRelatedToSingleConduitEnd(SpanEquipmentViewModel viewModel, BlockPort outerConduitPort)
{
var routeSpanDiagramInfo = viewModel.RootSpanDiagramInfo("OuterConduit");
var cableRelations = _nodeContainerViewModel.Data.ConduitSegmentToCableChildRelations[routeSpanDiagramInfo.SegmentId];
foreach (var cableId in cableRelations)
{
var terminal = new BlockPortTerminal(outerConduitPort)
{
IsVisible = viewModel.IsSingleSpan && viewModel.SpanEquipment.SpanStructures.Length == 1,
ShapeType = TerminalShapeTypeEnum.Point,
PointStyle = outerConduitPort.Side + "TerminalLabel",
PointLabel = viewModel.InterestRelationKind() == RouteNetworkInterestRelationKindEnum.End ? viewModel.GetIngoingRouteNodeName(routeSpanDiagramInfo.SegmentId) : viewModel.GetOutgoingRouteNodeName(routeSpanDiagramInfo.SegmentId),
PolygonStyle = routeSpanDiagramInfo.StyleName,
DrawingOrder = 620
};
terminal.SetReference(routeSpanDiagramInfo.SegmentId, "SpanSegment");
// Create a fake terminal for the cable
AddToTerminalEnds(cableId, routeSpanDiagramInfo.SpanSegment, terminal, routeSpanDiagramInfo.StyleName);
}
}
private void CreateTerminalForSingleConduitEnd(SpanEquipmentViewModel viewModel, BlockPort outerConduitPort)
{
var routeSpanDiagramInfo = viewModel.RootSpanDiagramInfo("OuterConduit");
var terminal = new BlockPortTerminal(outerConduitPort)
{
IsVisible = true,
ShapeType = viewModel.IsSingleSpan ? TerminalShapeTypeEnum.PointAndPolygon : TerminalShapeTypeEnum.Point,
PointStyle = outerConduitPort.Side.ToString() + "TerminalLabel",
PointLabel = viewModel.InterestRelationKind() == RouteNetworkInterestRelationKindEnum.End ? viewModel.GetIngoingRouteNodeName(routeSpanDiagramInfo.SegmentId) : viewModel.GetOutgoingRouteNodeName(routeSpanDiagramInfo.SegmentId),
PolygonStyle = routeSpanDiagramInfo.StyleName,
DrawingOrder = 620
};
terminal.SetReference(routeSpanDiagramInfo.SegmentId, "SpanSegment");
AddToTerminalEnds(routeSpanDiagramInfo.TerminalId, routeSpanDiagramInfo.SpanSegment, terminal, routeSpanDiagramInfo.StyleName);
// Check if cables are related to the conduit
if (_nodeContainerViewModel.Data.ConduitSegmentToCableChildRelations.ContainsKey(routeSpanDiagramInfo.SegmentId))
{
var cableRelations = _nodeContainerViewModel.Data.ConduitSegmentToCableChildRelations[routeSpanDiagramInfo.SegmentId];
foreach (var cableId in cableRelations)
{
// Add cable to terminal end relation
AddToTerminalEnds(cableId, routeSpanDiagramInfo.SpanSegment, terminal, routeSpanDiagramInfo.StyleName);
}
}
}
private BlockPortTerminal CreateTerminalForInnerConduitEnd(SpanEquipmentViewModel viewModel, BlockPort outerConduitPort, SpanDiagramInfo innerSpanDiagramInfo)
{
var terminal = new BlockPortTerminal(outerConduitPort)
{
IsVisible = true,
ShapeType = TerminalShapeTypeEnum.PointAndPolygon,
PointStyle = outerConduitPort.Side.ToString() + "TerminalLabel",
PointLabel = viewModel.InterestRelationKind() == RouteNetworkInterestRelationKindEnum.End ? viewModel.GetIngoingRouteNodeName(innerSpanDiagramInfo.SegmentId) : viewModel.GetOutgoingRouteNodeName(innerSpanDiagramInfo.SegmentId),
PolygonStyle = innerSpanDiagramInfo.StyleName
};
terminal.DrawingOrder = 620;
terminal.SetReference(innerSpanDiagramInfo.SegmentId, "SpanSegment");
AddToTerminalEnds(innerSpanDiagramInfo.TerminalId, innerSpanDiagramInfo.SpanSegment, terminal, innerSpanDiagramInfo.StyleName);
return(terminal);
}
private void AffixPassThroughConduit(LineBlock nodeContainerBlock, SpanEquipmentViewModel viewModel)
{
var spanDiagramInfo = viewModel.RootSpanDiagramInfo("OuterConduit");
BlockSideEnum fromSide = viewModel.BlockSideWhereSpanEquipmentShouldBeAffixed();
BlockSideEnum toSide = viewModel.OppositeBlockSideWhereSpanEquipmentShouldBeAffixed();
bool portsVisible = true;
// If cut we want to draw the port polygons, because otherwise the outer conduit cannot be seen on the diagram (due to missing connection between the two sides)
if (spanDiagramInfo.IsPassThrough)
{
portsVisible = false;
}
// Create outer conduit as port
var fromPort = new BlockPort(fromSide)
{
IsVisible = portsVisible,
Margin = _portMargin,
Style = spanDiagramInfo.StyleName,
PointStyle = fromSide.ToString() + "TerminalLabel",
PointLabel = viewModel.GetConduitEquipmentLabel()
};
fromPort.DrawingOrder = 420;
fromPort.SetReference(viewModel.RootSpanDiagramInfo("OuterConduit").IngoingSegmentId, "SpanSegment");
nodeContainerBlock.AddPort(fromPort);
var toPort = new BlockPort(toSide)
{
IsVisible = portsVisible,
Margin = _portMargin,
Style = spanDiagramInfo.StyleName,
PointStyle = toSide.ToString() + "TerminalLabel",
PointLabel = viewModel.GetConduitEquipmentLabel()
};
toPort.DrawingOrder = 420;
toPort.SetReference(viewModel.RootSpanDiagramInfo("OuterConduit").OutgoingSegmentId, "SpanSegment");
nodeContainerBlock.AddPort(toPort);
if (spanDiagramInfo.IsPassThrough)
{
var portConnection = nodeContainerBlock.AddPortConnection(fromSide, fromPort.Index, toSide, toPort.Index, null, spanDiagramInfo.StyleName);
portConnection.SetReference(spanDiagramInfo.SegmentId, "SpanSegment");
portConnection.DrawingOrder = 410;
}
List <SpanDiagramInfo> innerSpanData = viewModel.GetInnerSpanDiagramInfos("InnerConduit");
bool innerSpansFound = false;
int terminalNo = 1;
if (innerSpanData.Count == 6)
{
}
foreach (var innerSpan in innerSpanData)
{
TerminalShapeTypeEnum terminalShapeType = TerminalShapeTypeEnum.Point;
// If cut we want to draw the terminal polygon, because otherwise the conduit cannot be seen on the diagram (due to missing connection between the two sides)
if (!innerSpan.IsPassThrough)
{
terminalShapeType = TerminalShapeTypeEnum.PointAndPolygon;
}
string fromNodeName = "NA";
string toNodeName = "NA";
if (innerSpan.IsPassThrough)
{
fromNodeName = viewModel.GetIngoingRouteNodeName(innerSpan.SegmentId);
toNodeName = viewModel.GetOutgoingRouteNodeName(innerSpan.SegmentId);
}
else
{
fromNodeName = viewModel.GetIngoingRouteNodeName(innerSpan.IngoingSpanSegment.Id);
toNodeName = viewModel.GetOutgoingRouteNodeName(innerSpan.OutgoingSpanSegment.Id);
}
var fromTerminal = new BlockPortTerminal(fromPort)
{
IsVisible = true,
ShapeType = terminalShapeType,
PointStyle = fromSide.ToString() + "TerminalLabel",
PointLabel = fromNodeName,
PolygonStyle = innerSpan.StyleName
};
fromTerminal.SetReference(innerSpan.IngoingSegmentId, "SpanSegment");
fromTerminal.DrawingOrder = 620;
var toTerminal = new BlockPortTerminal(toPort)
{
IsVisible = true,
ShapeType = terminalShapeType,
PointStyle = toSide.ToString() + "TerminalLabel",
PointLabel = toNodeName,
PolygonStyle = innerSpan.StyleName
};
toTerminal.SetReference(innerSpan.OutgoingSegmentId, "SpanSegment");
toTerminal.DrawingOrder = 620;
// Connect the two sides, if the inner conduit is not cut / passing through
if (innerSpan.IsPassThrough)
{
var terminalConnection = nodeContainerBlock.AddTerminalConnection(fromSide, fromPort.Index, terminalNo, toSide, toPort.Index, terminalNo, null, innerSpan.StyleName, LineShapeTypeEnum.Polygon);
terminalConnection.SetReference(innerSpan.IngoingSegmentId, "SpanSegment");
terminalConnection.DrawingOrder = 510;
// Add eventually cable running through inner conduit
if (_nodeContainerViewModel.Data.ConduitSegmentToCableChildRelations.ContainsKey(innerSpan.IngoingSegmentId))
{
var cableId = _nodeContainerViewModel.Data.ConduitSegmentToCableChildRelations[innerSpan.IngoingSegmentId].First();
var fiberCableLineLabel = _nodeContainerViewModel.Data.GetCableEquipmentLineLabel(cableId);
var cableTerminalConnection = nodeContainerBlock.AddTerminalConnection(BlockSideEnum.West, 1, terminalNo, BlockSideEnum.East, 1, terminalNo, fiberCableLineLabel, "FiberCable", LineShapeTypeEnum.Line);
cableTerminalConnection.DrawingOrder = 600;
cableTerminalConnection.SetReference(cableId, "SpanSegment");
}
}
else
{
// Add from terminal / ingoing segment to ends
AddToTerminalEnds(innerSpan.IngoingTerminalId, innerSpan.IngoingSpanSegment, fromTerminal, innerSpan.StyleName);
// Add to terminal / outgoing segment to ends
AddToTerminalEnds(innerSpan.OutgoingTerminalId, innerSpan.OutgoingSpanSegment, toTerminal, innerSpan.StyleName);
}
terminalNo++;
innerSpansFound = true;
}
// Create fake inner terminals used to display where the empty multi conduit is heading
if (!innerSpansFound)
{
var fromTerminal = new BlockPortTerminal(fromPort)
{
IsVisible = true,
ShapeType = TerminalShapeTypeEnum.Point,
PointStyle = fromSide.ToString() + "TerminalLabel",
PointLabel = viewModel.GetIngoingRouteNodeName(spanDiagramInfo.IngoingSegmentId),
DrawingOrder = 520
};
fromTerminal.SetReference(spanDiagramInfo.IngoingSegmentId, "SpanSegment");
var toTerminal = new BlockPortTerminal(toPort)
{
IsVisible = true,
ShapeType = TerminalShapeTypeEnum.Point,
PointStyle = toSide.ToString() + "TerminalLabel",
PointLabel = viewModel.GetOutgoingRouteNodeName(spanDiagramInfo.IngoingSegmentId),
DrawingOrder = 520
};
toTerminal.SetReference(spanDiagramInfo.OutgoingSegmentId, "SpanSegment");
terminalNo++;
}
}
