Beispiel #1
0
        public void WriteBuffer(byte[] buff, WaveFormatEx wfex, string destFile)
        {
            using (FileStream fs = new FileStream(destFile, FileMode.Create, FileAccess.Write, FileShare.None))
            using (BinaryWriter bw = new BinaryWriter(fs))
            {
                bw.Write(RIFF_TAG);
                bw.Write((uint)(WaveHeaderSize + buff.Length));
                bw.Write(WAVE_TAG);
                bw.Write(FMT__TAG);
                bw.Write(WaveFormatSize);

                int size = Marshal.SizeOf(wfex);
                byte[] arr = new byte[size];
                IntPtr ptr = Marshal.AllocHGlobal(size);
                Marshal.StructureToPtr(wfex, ptr, true);
                Marshal.Copy(ptr, arr, 0, size);
                Marshal.FreeHGlobal(ptr);

                bw.Write(arr);
                bw.Write(DATA_TAG);
                bw.Write(buff.Length);
                bw.Write(buff);
            }
        }
Beispiel #2
0
 public static void SetFormat(ref AMMediaType mt, ref WaveFormatEx wfx)
 {
     if (wfx != null)
     {
         int cb = Marshal.SizeOf(wfx);
         IntPtr _ptr = Marshal.AllocCoTaskMem(cb);
         try
         {
             Marshal.StructureToPtr(wfx, _ptr, true);
             SetFormat(ref mt, _ptr, cb);
             if (mt != null)
             {
                 mt.formatType = FormatType.WaveEx;
             }
         }
         finally
         {
             Marshal.FreeCoTaskMem(_ptr);
         }
     }
 }
Beispiel #3
0
 public void SetFormat(WaveFormatEx wfx)
 {
     if (wfx != null)
     {
         int cb = Marshal.SizeOf(wfx);
         IntPtr _ptr = Marshal.AllocCoTaskMem(cb);
         try
         {
             Marshal.StructureToPtr(wfx, _ptr, true);
             SetFormat(_ptr, cb);
             formatType = FormatType.WaveEx;
         }
         finally
         {
             Marshal.FreeCoTaskMem(_ptr);
         }
     }
 }
Beispiel #4
0
 public WaveFormatExtensible()
 {
     Format = new WaveFormatEx();
 }
Beispiel #5
0
 public BE_CONFIG(WaveFormatEx format)
     : this(format, 192)
 {
 }
Beispiel #6
0
 public BE_CONFIG(WaveFormatEx format, uint MpeBitRate)
 {
     this.dwConfig = BE_CONFIG_LAME;
     this.format = new LHV1(format, MpeBitRate);
 }
Beispiel #7
0
 public LHV1(WaveFormatEx format, uint MpeBitRate)
 {
     if (format.wFormatTag != 1 /* WAVE_FORMAT_PCM */)
     {
         throw new ArgumentOutOfRangeException("format", "Only PCM format supported");
     }
     if (format.wBitsPerSample != 16)
     {
         throw new ArgumentOutOfRangeException("format", "Only 16 bits samples supported");
     }
     dwStructVersion = 1;
     dwStructSize = (uint)Marshal.SizeOf(typeof(BE_CONFIG));
     switch (format.nSamplesPerSec)
     {
         case 16000:
         case 22050:
         case 24000:
             dwMpegVersion = MPEG2;
             break;
         case 32000:
         case 44100:
         case 48000:
             dwMpegVersion = MPEG1;
             break;
         default:
             throw new ArgumentOutOfRangeException("format", "Unsupported sample rate");
     }
     dwSampleRate = (uint)format.nSamplesPerSec;				// INPUT FREQUENCY
     dwReSampleRate = 0;					// DON'T RESAMPLE
     switch (format.nChannels)
     {
         case 1:
             nMode = MpegMode.MONO;
             break;
         case 2:
             nMode = MpegMode.STEREO;
             break;
         default:
             throw new ArgumentOutOfRangeException("format", "Invalid number of channels");
     }
     switch (MpeBitRate)
     {
         case 32:
         case 40:
         case 48:
         case 56:
         case 64:
         case 80:
         case 96:
         case 112:
         case 128:
         case 160: //Allowed bit rates in MPEG1 and MPEG2
             break;
         case 192:
         case 224:
         case 256:
         case 320: //Allowed only in MPEG1
             if (dwMpegVersion != MPEG1)
             {
                 throw new ArgumentOutOfRangeException("MpsBitRate", "Bit rate not compatible with input format");
             }
             break;
         case 8:
         case 16:
         case 24:
         case 144: //Allowed only in MPEG2
             if (dwMpegVersion != MPEG2)
             {
                 throw new ArgumentOutOfRangeException("MpsBitRate", "Bit rate not compatible with input format");
             }
             break;
         default:
             throw new ArgumentOutOfRangeException("MpsBitRate", "Unsupported bit rate");
     }
     dwBitrate = MpeBitRate;					// MINIMUM BIT RATE
     nPreset = LAME_QUALITY_PRESET.LQP_NORMAL_QUALITY;		// QUALITY PRESET SETTING
     dwPsyModel = 0;					// USE DEFAULT PSYCHOACOUSTIC MODEL 
     dwEmphasis = 0;					// NO EMPHASIS TURNED ON
     bOriginal = 1;					// SET ORIGINAL FLAG
     bWriteVBRHeader = 0;
     bNoRes = 0;					// No Bit resorvoir
     bCopyright = 0;
     bCRC = 0;
     bEnableVBR = 0;
     bPrivate = 0;
     bStrictIso = 0;
     dwMaxBitrate = 0;
     dwVbrAbr_bps = 0;
     nQuality = 0;
     nVbrMethod = VBRMETHOD.VBR_METHOD_NONE;
     nVBRQuality = 0;
 }
Beispiel #8
0
        private byte[] ReadWAV(string inputFile, ref WaveFormatEx wfex)
        {
            try
            {
                using (FileStream fs = new FileStream(inputFile, FileMode.Open, FileAccess.Read, FileShare.Read))
                using (BinaryReader br = new BinaryReader(fs))
                {
                    br.ReadUInt32(); // RIFF_TAG
                    uint rawSize = br.ReadUInt32(); // WaveHeaderSize + buff.Length
                    uint buffSize = rawSize - CdRipper.WaveHeaderSize - sizeof(uint);

                    br.ReadUInt32(); // WAVE_TAG
                    br.ReadUInt32(); // FMT__TAG
                    br.ReadUInt32(); // WaveFormatSize

                    byte[] bytesWfex = br.ReadBytes(Marshal.SizeOf(wfex));

                    var pinnedRawData = GCHandle.Alloc(bytesWfex, GCHandleType.Pinned);
                    try
                    {
                        // Get the address of the data array
                        var pinnedRawDataPtr = pinnedRawData.AddrOfPinnedObject();

                        // overlay the data type on top of the raw data
                        wfex = (WaveFormatEx)Marshal.PtrToStructure(pinnedRawDataPtr, typeof(WaveFormatEx));
                    }
                    finally
                    {
                        // must explicitly release
                        pinnedRawData.Free();
                    }

                    br.ReadUInt32(); // DATA_TAG

                    return br.ReadBytes((int)buffSize);
                }
            }
            catch { }

            return null;
        }
        protected void ReleaseAudioSampleGrabber()
        {
            try
            {
                if (sampleAnalyzerMustStop != null)
                sampleAnalyzerMustStop.Set(); // This will cause the thread to stop

                if (sampleAnalyzerThread != null)
                sampleAnalyzerThread.Join(200);

                if (sampleGrabber != null)
                {
                    int hr = (mediaControl as IGraphBuilder).RemoveFilter(sampleGrabber as IBaseFilter);
                    DsError.ThrowExceptionForHR(hr);

                    Marshal.ReleaseComObject(sampleGrabber);
                    sampleGrabber = null;
                }
            }
            catch (Exception ex)
            {
                Logger.LogException(ex);
            }

            if (rotEntry != null)
            {
                rotEntry.Dispose();
                rotEntry = null;
            }

            lock (_vuLock)
            {
                _vuMeterData = null;
            }
            lock (_waveformLock)
            {
                _waveformData = null;
            }
            lock (_spectrogramLock)
            {
                _spectrogramData = null;
            }

            _actualAudioFormat = null;
            sampleGrabberConfigured.Reset();
        }
Beispiel #10
0
        protected void CompleteAudioSampleGrabberIntialization()
        {
            _actualAudioFormat = null;
            if (sampleGrabber != null)
            {
                AMMediaType mtAudio = new AMMediaType();
                if (HRESULT.SUCCEEDED(sampleGrabber.GetConnectedMediaType(mtAudio)))
                {
                    _actualAudioFormat = (WaveFormatEx)Marshal.PtrToStructure(mtAudio.formatPtr, typeof(WaveFormatEx));

                    const int WAVEFORM_WNDSIZEFACTOR = 128;
                    const int VU_WNDSIZEFACTOR = 4096;
                    const int FFT_WNDSIZEFACTOR = 16;

                    int freq =
                        (MediaRenderer.DefaultInstance.ActualAudioFormat == null) ? 44100 :
                        MediaRenderer.DefaultInstance.ActualAudioFormat.nSamplesPerSec;

                    try
                    {
                        int k1 = 0, k2 = 0, k3 = 0;

                        while (freq / (1 << k1) > WAVEFORM_WNDSIZEFACTOR)
                            k1++;
                        while (freq / (1 << k2) > FFT_WNDSIZEFACTOR)
                            k2++;
                        while (freq / (1 << k3) > VU_WNDSIZEFACTOR)
                            k3++;

                        _waveformWindowSize = (1 << k1);
                        _fftWindowSize = (1 << k2);
                        _vuMeterWindowSize = (1 << k3);

                        _maxLevel =
                            (MediaRenderer.DefaultInstance.ActualAudioFormat != null) ?
                            (1 << (MediaRenderer.DefaultInstance.ActualAudioFormat.wBitsPerSample - 1)) - 1 :
                            short.MaxValue;
                    }
                    catch
                    {
                        _vuMeterWindowSize = 64;
                        _waveformWindowSize = 512;
                        _fftWindowSize = 4096;
                        _maxLevel = short.MaxValue;
                    }
                    finally
                    {
                        _maxLogLevel = Math.Log(_maxLevel);
                    }

                    sampleGrabberConfigured.Set();
                    return;
                }
            }
        }
Beispiel #11
0
        /*
        protected void InitAudioSampleGrabber()
        {
            // Get the graph builder
            IGraphBuilder graphBuilder = (mediaControl as IGraphBuilder);
            if (graphBuilder == null)
                return; 
            
            try
            {
                // Build the sample grabber
                sampleGrabber = Activator.CreateInstance(Type.GetTypeFromCLSID(Filters.SampleGrabber, true))
                    as ISampleGrabber;

                if (sampleGrabber == null)
                    return;

                // Add it to the filter graph
                int hr = graphBuilder.AddFilter(sampleGrabber as IBaseFilter, "ProTONE_SampleGrabber");
                DsError.ThrowExceptionForHR(hr);

                AMMediaType mtAudio = new AMMediaType();
                mtAudio.majorType = MediaType.Audio;
                mtAudio.subType = MediaSubType.PCM;
                mtAudio.formatPtr = IntPtr.Zero;

                _actualAudioFormat = null;

                hr = sampleGrabber.SetMediaType(mtAudio);
                DsError.ThrowExceptionForHR(hr);

                hr = sampleGrabber.SetBufferSamples(true);
                DsError.ThrowExceptionForHR(hr);

                hr = sampleGrabber.SetOneShot(false);
                DsError.ThrowExceptionForHR(hr);

                hr = sampleGrabber.SetCallback(this, 1);
                DsError.ThrowExceptionForHR(hr);

                sampleAnalyzerMustStop.Reset();
                sampleAnalyzerThread = new Thread(new ThreadStart(SampleAnalyzerLoop));
                sampleAnalyzerThread.Priority = ThreadPriority.Highest;
                sampleAnalyzerThread.Start();
            }
            catch(Exception ex)
            {
                Logger.LogException(ex);
            }

            rotEntry = new DsROTEntry(graphBuilder as IFilterGraph);
        }*/

        protected void InitAudioSampleGrabber_v2()
        {
            // Get the graph builder
            IGraphBuilder graphBuilder = (mediaControl as IGraphBuilder);
            if (graphBuilder == null)
                return;

            try
            {
                // Build the sample grabber
                sampleGrabber = Activator.CreateInstance(Type.GetTypeFromCLSID(Filters.SampleGrabber, true))
                    as ISampleGrabber;

                if (sampleGrabber == null)
                    return;

                // Add it to the filter graph
                int hr = graphBuilder.AddFilter(sampleGrabber as IBaseFilter, "ProTONE_SampleGrabber_v2");
                DsError.ThrowExceptionForHR(hr);

                IBaseFilter ffdAudioDecoder = null;

                IPin ffdAudioDecoderOutput = null;
                IPin soundDeviceInput = null;
                IPin sampleGrabberInput = null;
                IPin sampleGrabberOutput = null;
                IntPtr pSoundDeviceInput = IntPtr.Zero;

                // When using FFDShow, typically we'll find
                // a ffdshow Audio Decoder connected to the sound device filter
                // 
                // i.e. [ffdshow Audio Decoder] --> [DirectSound Device]
                //
                // Our audio sample grabber supports only PCM sample input and output.
                // Its entire processing is based on this assumption.
                // 
                // Thus need to insert the audio sample grabber between the ffdshow Audio Decoder and the sound device
                // because this is the only place where we can find PCM samples. The sound device only accepts PCM.
                //
                // So we need to turn this graph:
                //
                // .. -->[ffdshow Audio Decoder]-->[DirectSound Device] 
                //
                // into this:
                //
                // .. -->[ffdshow Audio Decoder]-->[Sample grabber]-->[DirectSound Device] 
                //
                // Actions to do to achieve the graph change:
                //
                // 1. Locate the ffdshow Audio Decoder in the graph
                // 2. Find its output pin and the pin that it's connected to
                // 3. Locate the input and output pins of sample grabber
                // 4. Disconnect the ffdshow Audio Decoder and its correspondent (sound device input pin)
                // 5. Connect the ffdshow Audio Decoder to sample grabber input
                // 6. Connect the sample grabber output to sound device input
                // that's all.

                // --------------
                // 1. Locate the ffdshow Audio Decoder in the graph
                hr = graphBuilder.FindFilterByName("ffdshow Audio Decoder", out ffdAudioDecoder);
                DsError.ThrowExceptionForHR(hr);

                // 2. Find its output pin and the pin that it's connected to
                hr = ffdAudioDecoder.FindPin("Out", out ffdAudioDecoderOutput);
                DsError.ThrowExceptionForHR(hr);

                hr = ffdAudioDecoderOutput.ConnectedTo(out pSoundDeviceInput);
                DsError.ThrowExceptionForHR(hr);

                soundDeviceInput = new DSPin(pSoundDeviceInput).Value;

                // 3. Locate the input and output pins of sample grabber
                hr = (sampleGrabber as IBaseFilter).FindPin("In", out sampleGrabberInput);
                DsError.ThrowExceptionForHR(hr);

                hr = (sampleGrabber as IBaseFilter).FindPin("Out", out sampleGrabberOutput);
                DsError.ThrowExceptionForHR(hr);

                // 4. Disconnect the ffdshow Audio Decoder and its correspondent (sound device input pin)
                hr = ffdAudioDecoderOutput.Disconnect();
                DsError.ThrowExceptionForHR(hr);

                hr = soundDeviceInput.Disconnect();
                DsError.ThrowExceptionForHR(hr);

                // 5. Connect the ffdshow Audio Decoder to sample grabber input
                hr = graphBuilder.Connect(ffdAudioDecoderOutput, sampleGrabberInput);
                DsError.ThrowExceptionForHR(hr);

                // 6. Connect the sample grabber output to sound device input
                hr = graphBuilder.Connect(sampleGrabberOutput, soundDeviceInput);
                DsError.ThrowExceptionForHR(hr);


                AMMediaType mtAudio = new AMMediaType();
                mtAudio.majorType = MediaType.Audio;
                mtAudio.subType = MediaSubType.PCM;
                mtAudio.formatPtr = IntPtr.Zero;

                _actualAudioFormat = null;

                sampleGrabber.SetMediaType(mtAudio);
                sampleGrabber.SetBufferSamples(true);
                sampleGrabber.SetOneShot(false);
                sampleGrabber.SetCallback(this, 1);

                sampleAnalyzerMustStop.Reset();
                sampleAnalyzerThread = new Thread(new ThreadStart(SampleAnalyzerLoop));
                sampleAnalyzerThread.Priority = ThreadPriority.Highest;
                sampleAnalyzerThread.Start();
            }
            catch (Exception ex)
            {
                Logger.LogException(ex);
            }

            rotEntry = new DsROTEntry(graphBuilder as IFilterGraph);
        }