Beispiel #1
0
        internal static Snap.NX.SplitBody CreateSplitBody(Snap.NX.Body targetBody, Snap.NX.DatumPlane[] toolDatumPlanes)
        {
            NXOpen.Part workPart = (NXOpen.Part)Globals.WorkPart;
            NXOpen.Features.SplitBodyBuilder featureBuilder = workPart.Features.CreateSplitBodyBuilder(null);
            featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.PrepareMappingData();
            featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.DistanceTolerance = Globals.DistanceTolerance;
            featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.ChainingTolerance = (Globals.UnitType == Globals.Unit.Millimeter) ? 0.02413 : 0.00095;
            ScCollector collector = workPart.ScCollectors.CreateCollector();

            NXOpen.Body[] bodies = new NXOpen.Body[] { targetBody };
            BodyDumbRule  rule   = workPart.ScRuleFactory.CreateRuleBodyDumb(bodies);

            SelectionIntentRule[] rules = new SelectionIntentRule[] { rule };
            collector.ReplaceRules(rules, false);
            featureBuilder.TargetBodyCollector = collector;
            SelectionIntentRule[] ruleArray2 = new SelectionIntentRule[toolDatumPlanes.Length];
            for (int i = 0; i < toolDatumPlanes.Length; i++)
            {
                NXOpen.DatumPlane[] faces = new NXOpen.DatumPlane[] { toolDatumPlanes[i].NXOpenDatumPlaneFeature.DatumPlane };
                ruleArray2[i] = workPart.ScRuleFactory.CreateRuleFaceDatum(faces);
            }
            featureBuilder.BooleanTool.FacePlaneTool.ToolFaces.FaceCollector.ReplaceRules(ruleArray2, false);
            NXOpen.Features.SplitBody split = (NXOpen.Features.SplitBody)Snap.NX.Feature.CommitFeature(featureBuilder);
            featureBuilder.Destroy();
            return(new Snap.NX.SplitBody(split));
        }
Beispiel #2
0
 internal static Snap.NX.TrimBody CreateTrimBody(Snap.NX.Body targetBody, Snap.NX.DatumPlane toolDatumPlane, bool direction)
 {
     NXOpen.Part workPart = (NXOpen.Part) Globals.WorkPart;
     TrimBody2Builder featureBuilder = workPart.Features.CreateTrimBody2Builder(null);
     featureBuilder.Tolerance = Globals.DistanceTolerance;
     featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.DistanceTolerance = Globals.DistanceTolerance;
     featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.ChainingTolerance = (Globals.UnitType == Globals.Unit.Millimeter) ? 0.02413 : 0.00095;
     ScCollector collector = workPart.ScCollectors.CreateCollector();
     NXOpen.Body[] bodies = new NXOpen.Body[] { targetBody };
     BodyDumbRule rule = workPart.ScRuleFactory.CreateRuleBodyDumb(bodies);
     SelectionIntentRule[] rules = new SelectionIntentRule[] { rule };
     collector.ReplaceRules(rules, false);
     featureBuilder.TargetBodyCollector = collector;
     SelectionIntentRule[] ruleArray2 = new SelectionIntentRule[1];
     NXOpen.DatumPlane[] faces = new NXOpen.DatumPlane[] { toolDatumPlane.NXOpenDatumPlaneFeature.DatumPlane };
     ruleArray2[0] = workPart.ScRuleFactory.CreateRuleFaceDatum(faces);
     featureBuilder.BooleanTool.FacePlaneTool.ToolFaces.FaceCollector.ReplaceRules(ruleArray2, false);
     featureBuilder.BooleanTool.ReverseDirection = direction;
     TrimBody2 trim = (TrimBody2) Snap.NX.Feature.CommitFeature(featureBuilder);
     featureBuilder.Destroy();
     return new Snap.NX.TrimBody(trim);
 }
Beispiel #3
0
    public static void Main(string[] args)
    {
        Console.WriteLine("Starting NX Golden Cantilever Journal");

        //Declare Part Variables
        //Convert Strings to doubles from the args
        double heightA   = System.Convert.ToDouble(args[0]);
        double length    = System.Convert.ToDouble(args[1]);
        double thickness = System.Convert.ToDouble(args[2]);


        //Declare part name for the part file and the IGES file
        string part_name     = args[3];
        string part_name_prt = part_name + ".prt";
        string part_name_igs = part_name + ".igs";

        //Measurements need to be converted from m to mm
        //length = 1000 * length;
        //thickness = 1000 * thickness;
        //heightA = 1000 * heightA;
        double heightB = 1.618 * heightA;


        //Convert necessary values back to strings because I already
        //converted them to doubles and I'm too lazy to go back and change
        //this since it works.
        string length_string    = System.Convert.ToString(length);
        string thickness_string = System.Convert.ToString(thickness);
        string heightA_string   = System.Convert.ToString(heightA);
        string heightB_string   = System.Convert.ToString(heightB);

        NXOpen.Session theSession = NXOpen.Session.GetSession();
        // ----------------------------------------------
        //   Menu: File->New...
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId1;
        markId1 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");

        NXOpen.FileNew fileNew1;
        fileNew1 = theSession.Parts.FileNew();

        theSession.SetUndoMarkName(markId1, "New Dialog");

        NXOpen.Session.UndoMarkId markId2;
        markId2 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");

        theSession.DeleteUndoMark(markId2, null);

        NXOpen.Session.UndoMarkId markId3;
        markId3 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");

        fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";

        fileNew1.UseBlankTemplate = false;

        fileNew1.ApplicationName = "ModelTemplate";

        fileNew1.Units = NXOpen.Part.Units.Millimeters;

        fileNew1.RelationType = "";

        fileNew1.UsesMasterModel = "No";

        fileNew1.TemplateType = NXOpen.FileNewTemplateType.Item;

        fileNew1.TemplatePresentationName = "Model";

        fileNew1.ItemType = "";

        fileNew1.Specialization = "";

        fileNew1.SetCanCreateAltrep(false);

        fileNew1.NewFileName = part_name_prt;

        fileNew1.MasterFileName = "";

        fileNew1.MakeDisplayedPart = true;

        NXOpen.NXObject nXObject1;
        nXObject1 = fileNew1.Commit();

        NXOpen.Part workPart    = theSession.Parts.Work;
        NXOpen.Part displayPart = theSession.Parts.Display;
        theSession.DeleteUndoMark(markId3, null);

        fileNew1.Destroy();

        theSession.ApplicationSwitchImmediate("UG_APP_MODELING");

        NXOpen.Session.UndoMarkId markId4;
        markId4 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Gateway");

        NXOpen.Session.UndoMarkId markId5;
        markId5 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Modeling");

        // ----------------------------------------------
        //   Menu: Insert->Sketch...
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId6;
        markId6 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");

        NXOpen.Sketch nullNXOpen_Sketch = null;
        NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
        sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullNXOpen_Sketch);

        NXOpen.Unit       unit1 = (NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter");
        NXOpen.Expression expression1;
        expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);

        NXOpen.Expression expression2;
        expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);

        NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
        sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);

        sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";

        theSession.SetUndoMarkName(markId6, "Create Sketch Dialog");

        NXOpen.DatumPlane datumPlane1 = (NXOpen.DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) YZ plane");
        NXOpen.Point3d    point1      = new NXOpen.Point3d(11.1863449593062, 6.4875984180345, 0.0);
        sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);

        NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
        NXOpen.Point point2 = (NXOpen.Point)datumCsys1.FindObject("POINT 1");
        sketchInPlaceBuilder1.SketchOrigin = point2;

        sketchInPlaceBuilder1.PlaneOrFace.Value = null;

        sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;

        NXOpen.DatumAxis datumAxis1 = (NXOpen.DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
        sketchInPlaceBuilder1.Axis.Value = datumAxis1;

        NXOpen.Session.UndoMarkId markId7;
        markId7 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");

        theSession.DeleteUndoMark(markId7, null);

        NXOpen.Session.UndoMarkId markId8;
        markId8 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");

        theSession.Preferences.Sketch.CreateInferredConstraints = true;

        theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;

        theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;

        theSession.Preferences.Sketch.TextSizeFixed = true;

        theSession.Preferences.Sketch.FixedTextSize = 3.0;

        theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;

        theSession.Preferences.Sketch.DisplayObjectColor = false;

        theSession.Preferences.Sketch.DisplayObjectName = true;

        NXOpen.NXObject nXObject2;
        nXObject2 = sketchInPlaceBuilder1.Commit();

        NXOpen.Sketch           sketch1 = (NXOpen.Sketch)nXObject2;
        NXOpen.Features.Feature feature1;
        feature1 = sketch1.Feature;

        NXOpen.Session.UndoMarkId markId9;
        markId9 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "update");

        int nErrs1;

        nErrs1 = theSession.UpdateManager.DoUpdate(markId9);

        sketch1.Activate(NXOpen.Sketch.ViewReorient.True);

        theSession.DeleteUndoMark(markId8, null);

        theSession.SetUndoMarkName(markId6, "Create Sketch");

        sketchInPlaceBuilder1.Destroy();

        sketchAlongPathBuilder1.Destroy();

        try
        {
            // Expression is still in use.
            workPart.Expressions.Delete(expression2);
        }
        catch (NXException ex)
        {
            ex.AssertErrorCode(1050029);
        }

        try
        {
            // Expression is still in use.
            workPart.Expressions.Delete(expression1);
        }
        catch (NXException ex)
        {
            ex.AssertErrorCode(1050029);
        }

        // ----------------------------------------------
        //   Menu: Insert->Sketch Curve->Line...
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId10;
        markId10 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Profile short list");

        NXOpen.Session.UndoMarkId markId11;
        markId11 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");

        NXOpen.Expression expression3;
        expression3 = workPart.Expressions.CreateSystemExpression(length_string);

        theSession.SetUndoMarkVisibility(markId11, "Curve", NXOpen.Session.MarkVisibility.Visible);

        NXOpen.Point3d startPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
        NXOpen.Point3d endPoint1   = new NXOpen.Point3d(length, 0.0, 0.0);
        NXOpen.Line    line1;
        line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);

        theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        NXOpen.Sketch.ConstraintGeometry geom1_1 = new NXOpen.Sketch.ConstraintGeometry();
        geom1_1.Geometry  = line1;
        geom1_1.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
        geom1_1.SplineDefiningPointIndex = 0;
        NXOpen.Sketch.ConstraintGeometry geom2_1    = new NXOpen.Sketch.ConstraintGeometry();
        NXOpen.Features.DatumCsys        datumCsys2 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("SKETCH(1:1B)");
        NXOpen.Point point3 = (NXOpen.Point)datumCsys2.FindObject("POINT 1");
        geom2_1.Geometry  = point3;
        geom2_1.PointType = NXOpen.Sketch.ConstraintPointType.None;
        geom2_1.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint1;
        sketchGeometricConstraint1 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_1, geom2_1);

        NXOpen.Sketch.ConstraintGeometry geom1 = new NXOpen.Sketch.ConstraintGeometry();
        geom1.Geometry  = line1;
        geom1.PointType = NXOpen.Sketch.ConstraintPointType.None;
        geom1.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint2;
        sketchGeometricConstraint2 = theSession.ActiveSketch.CreateHorizontalConstraint(geom1);

        NXOpen.Sketch.DimensionGeometry dimObject1_1 = new NXOpen.Sketch.DimensionGeometry();
        dimObject1_1.Geometry    = line1;
        dimObject1_1.AssocType   = NXOpen.Sketch.AssocType.StartPoint;
        dimObject1_1.AssocValue  = 0;
        dimObject1_1.HelpPoint.X = 0.0;
        dimObject1_1.HelpPoint.Y = 0.0;
        dimObject1_1.HelpPoint.Z = 0.0;
        NXOpen.NXObject nullNXOpen_NXObject = null;
        dimObject1_1.View = nullNXOpen_NXObject;
        NXOpen.Sketch.DimensionGeometry dimObject2_1 = new NXOpen.Sketch.DimensionGeometry();
        dimObject2_1.Geometry    = line1;
        dimObject2_1.AssocType   = NXOpen.Sketch.AssocType.EndPoint;
        dimObject2_1.AssocValue  = 0;
        dimObject2_1.HelpPoint.X = 0.0;
        dimObject2_1.HelpPoint.Y = 0.0;
        dimObject2_1.HelpPoint.Z = 0.0;
        dimObject2_1.View        = nullNXOpen_NXObject;
        NXOpen.Point3d dimOrigin1 = new NXOpen.Point3d(45.0, -9.0598069411704, 0.0);
        NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint1;
        sketchDimensionalConstraint1 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_1, dimObject2_1, dimOrigin1, expression3, NXOpen.Sketch.DimensionOption.CreateAsDriving);

        NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint1 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint1;
        NXOpen.Annotations.Dimension             dimension1;
        dimension1 = sketchHelpedDimensionalConstraint1.AssociatedDimension;

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId12;
        markId12 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");

        NXOpen.Expression expression4;
        expression4 = workPart.Expressions.CreateSystemExpression(heightA_string);

        NXOpen.Expression expression5;
        expression5 = workPart.Expressions.CreateSystemExpression(length_string);

        workPart.Expressions.Edit(expression4, heightA_string);

        theSession.SetUndoMarkVisibility(markId12, "Curve", NXOpen.Session.MarkVisibility.Visible);

        NXOpen.Point3d startPoint2 = new NXOpen.Point3d(length, 0.0, 0.0);
        NXOpen.Point3d endPoint2   = new NXOpen.Point3d(length, heightA, 0.0);
        NXOpen.Line    line2;
        line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);

        theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        NXOpen.Sketch.ConstraintGeometry geom1_2 = new NXOpen.Sketch.ConstraintGeometry();
        geom1_2.Geometry  = line2;
        geom1_2.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
        geom1_2.SplineDefiningPointIndex = 0;
        NXOpen.Sketch.ConstraintGeometry geom2_2 = new NXOpen.Sketch.ConstraintGeometry();
        geom2_2.Geometry  = line1;
        geom2_2.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
        geom2_2.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint3;
        sketchGeometricConstraint3 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_2, geom2_2);

        NXOpen.Sketch.ConstraintGeometry geom2 = new NXOpen.Sketch.ConstraintGeometry();
        geom2.Geometry  = line2;
        geom2.PointType = NXOpen.Sketch.ConstraintPointType.None;
        geom2.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint4;
        sketchGeometricConstraint4 = theSession.ActiveSketch.CreateVerticalConstraint(geom2);

        workPart.Expressions.Delete(expression5);

        NXOpen.Sketch.DimensionGeometry dimObject1_2 = new NXOpen.Sketch.DimensionGeometry();
        dimObject1_2.Geometry    = line2;
        dimObject1_2.AssocType   = NXOpen.Sketch.AssocType.StartPoint;
        dimObject1_2.AssocValue  = 0;
        dimObject1_2.HelpPoint.X = 0.0;
        dimObject1_2.HelpPoint.Y = 0.0;
        dimObject1_2.HelpPoint.Z = 0.0;
        dimObject1_2.View        = nullNXOpen_NXObject;
        NXOpen.Sketch.DimensionGeometry dimObject2_2 = new NXOpen.Sketch.DimensionGeometry();
        dimObject2_2.Geometry    = line2;
        dimObject2_2.AssocType   = NXOpen.Sketch.AssocType.EndPoint;
        dimObject2_2.AssocValue  = 0;
        dimObject2_2.HelpPoint.X = 0.0;
        dimObject2_2.HelpPoint.Y = 0.0;
        dimObject2_2.HelpPoint.Z = 0.0;
        dimObject2_2.View        = nullNXOpen_NXObject;
        NXOpen.Point3d dimOrigin2 = new NXOpen.Point3d(99.0598069411704, 15.0, 0.0);
        NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint2;
        sketchDimensionalConstraint2 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_2, dimObject2_2, dimOrigin2, expression4, NXOpen.Sketch.DimensionOption.CreateAsDriving);

        NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint2 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint2;
        NXOpen.Annotations.Dimension             dimension2;
        dimension2 = sketchHelpedDimensionalConstraint2.AssociatedDimension;

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId13;
        markId13 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");

        NXOpen.Expression expression6;
        expression6 = workPart.Expressions.CreateSystemExpression(heightB_string);

        NXOpen.Expression expression7;
        expression7 = workPart.Expressions.CreateSystemExpression(length_string);

        theSession.SetUndoMarkVisibility(markId13, "Curve", NXOpen.Session.MarkVisibility.Visible);

        NXOpen.Point3d startPoint3 = new NXOpen.Point3d(0.0, 0.0, 0.0);
        NXOpen.Point3d endPoint3   = new NXOpen.Point3d(7.02873218749514e-014, heightB, 0.0);
        NXOpen.Line    line3;
        line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);

        theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        NXOpen.Sketch.ConstraintGeometry geom1_3 = new NXOpen.Sketch.ConstraintGeometry();
        geom1_3.Geometry  = line3;
        geom1_3.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
        geom1_3.SplineDefiningPointIndex = 0;
        NXOpen.Sketch.ConstraintGeometry geom2_3 = new NXOpen.Sketch.ConstraintGeometry();
        geom2_3.Geometry  = line1;
        geom2_3.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
        geom2_3.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint5;
        sketchGeometricConstraint5 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_3, geom2_3);

        NXOpen.Sketch.ConstraintGeometry geom3 = new NXOpen.Sketch.ConstraintGeometry();
        geom3.Geometry  = line3;
        geom3.PointType = NXOpen.Sketch.ConstraintPointType.None;
        geom3.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint6;
        sketchGeometricConstraint6 = theSession.ActiveSketch.CreateVerticalConstraint(geom3);

        workPart.Expressions.Delete(expression7);

        NXOpen.Sketch.DimensionGeometry dimObject1_3 = new NXOpen.Sketch.DimensionGeometry();
        dimObject1_3.Geometry    = line3;
        dimObject1_3.AssocType   = NXOpen.Sketch.AssocType.StartPoint;
        dimObject1_3.AssocValue  = 0;
        dimObject1_3.HelpPoint.X = 0.0;
        dimObject1_3.HelpPoint.Y = 0.0;
        dimObject1_3.HelpPoint.Z = 0.0;
        dimObject1_3.View        = nullNXOpen_NXObject;
        NXOpen.Sketch.DimensionGeometry dimObject2_3 = new NXOpen.Sketch.DimensionGeometry();
        dimObject2_3.Geometry    = line3;
        dimObject2_3.AssocType   = NXOpen.Sketch.AssocType.EndPoint;
        dimObject2_3.AssocValue  = 0;
        dimObject2_3.HelpPoint.X = 0.0;
        dimObject2_3.HelpPoint.Y = 0.0;
        dimObject2_3.HelpPoint.Z = 0.0;
        dimObject2_3.View        = nullNXOpen_NXObject;
        NXOpen.Point3d dimOrigin3 = new NXOpen.Point3d(9.05980694117043, heightA, 0.0);
        NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint3;
        sketchDimensionalConstraint3 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_3, dimObject2_3, dimOrigin3, expression6, NXOpen.Sketch.DimensionOption.CreateAsDriving);

        NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint3 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint3;
        NXOpen.Annotations.Dimension             dimension3;
        dimension3 = sketchHelpedDimensionalConstraint3.AssociatedDimension;

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId14;
        markId14 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");

        theSession.SetUndoMarkVisibility(markId14, "Curve", NXOpen.Session.MarkVisibility.Visible);

        NXOpen.Point3d startPoint4 = new NXOpen.Point3d(0.0, heightB, 0.0);
        NXOpen.Point3d endPoint4   = new NXOpen.Point3d(length, heightA, 0.0);
        //NXOpen.Point3d endPoint4 = new NXOpen.Point3d(90.0, 29.9999999999998, 0.0);
        NXOpen.Line line4;
        line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);

        theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        NXOpen.Sketch.ConstraintGeometry geom1_4 = new NXOpen.Sketch.ConstraintGeometry();
        geom1_4.Geometry  = line4;
        geom1_4.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
        geom1_4.SplineDefiningPointIndex = 0;
        NXOpen.Sketch.ConstraintGeometry geom2_4 = new NXOpen.Sketch.ConstraintGeometry();
        geom2_4.Geometry  = line3;
        geom2_4.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
        geom2_4.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint7;
        sketchGeometricConstraint7 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_4, geom2_4);

        NXOpen.Sketch.ConstraintGeometry geom1_5 = new NXOpen.Sketch.ConstraintGeometry();
        geom1_5.Geometry  = line4;
        geom1_5.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
        geom1_5.SplineDefiningPointIndex = 0;
        NXOpen.Sketch.ConstraintGeometry geom2_5 = new NXOpen.Sketch.ConstraintGeometry();
        geom2_5.Geometry  = line2;
        geom2_5.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
        geom2_5.SplineDefiningPointIndex = 0;
        NXOpen.SketchGeometricConstraint sketchGeometricConstraint8;
        sketchGeometricConstraint8 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_5, geom2_5);

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        // ----------------------------------------------
        // ----------------------------------------------
        //   Menu: File->Finish Sketch
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId15;
        markId15 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Deactivate Sketch");

        theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);

        // ----------------------------------------------
        //   Menu: Insert->Design Feature->Extrude...
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId16;
        markId16 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");

        NXOpen.Features.Feature nullNXOpen_Features_Feature = null;

        if (!workPart.Preferences.Modeling.GetHistoryMode())
        {
            throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
        }

        NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
        extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullNXOpen_Features_Feature);

        NXOpen.Section section1;
        section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);

        extrudeBuilder1.Section = section1;

        extrudeBuilder1.AllowSelfIntersectingSection(true);

        NXOpen.Unit unit2;
        unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;

        NXOpen.Expression expression8;
        expression8 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);

        extrudeBuilder1.DistanceTolerance = 0.01;

        extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;

        NXOpen.Body[] targetBodies1   = new NXOpen.Body[1];
        NXOpen.Body   nullNXOpen_Body = null;
        targetBodies1[0] = nullNXOpen_Body;
        extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);

        extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";

        extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = "25";

        extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";

        extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";

        extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";

        extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = thickness_string;

        extrudeBuilder1.Draft.FrontDraftAngle.RightHandSide = "2";

        extrudeBuilder1.Draft.BackDraftAngle.RightHandSide = "2";

        extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";

        extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";

        NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
        smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;

        smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;

        smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;

        theSession.SetUndoMarkName(markId16, "Extrude Dialog");

        section1.DistanceTolerance = 0.01;

        section1.ChainingTolerance = 0.0095;

        section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);

        NXOpen.Session.UndoMarkId markId17;
        markId17 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "section mark");

        NXOpen.Session.UndoMarkId markId18;
        markId18 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, null);

        NXOpen.Features.Feature[]     features1      = new NXOpen.Features.Feature[1];
        NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
        features1[0] = sketchFeature1;
        NXOpen.CurveFeatureRule curveFeatureRule1;
        curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);

        section1.AllowSelfIntersection(true);

        NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
        rules1[0] = curveFeatureRule1;
        NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(53.8762063337749, 42.0412645554082, 0.0);
        section1.AddToSection(rules1, line4, nullNXOpen_NXObject, nullNXOpen_NXObject, helpPoint1, NXOpen.Section.Mode.Create, false);

        theSession.DeleteUndoMark(markId18, null);

        NXOpen.Direction direction1;
        direction1 = workPart.Directions.CreateDirection(sketch1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);

        extrudeBuilder1.Direction = direction1;

        theSession.DeleteUndoMark(markId17, null);

        NXOpen.Session.UndoMarkId markId19;
        markId19 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");

        theSession.DeleteUndoMark(markId19, null);

        NXOpen.Session.UndoMarkId markId20;
        markId20 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");

        extrudeBuilder1.ParentFeatureInternal = false;

        NXOpen.Features.Feature feature2;
        feature2 = extrudeBuilder1.CommitFeature();

        theSession.DeleteUndoMark(markId20, null);

        theSession.SetUndoMarkName(markId16, "Extrude");

        NXOpen.Expression expression9  = extrudeBuilder1.Limits.StartExtend.Value;
        NXOpen.Expression expression10 = extrudeBuilder1.Limits.EndExtend.Value;
        extrudeBuilder1.Destroy();

        workPart.Expressions.Delete(expression8);

        // ----------------------------------------------
        //   Menu: File->Save
        // ----------------------------------------------
        NXOpen.PartSaveStatus partSaveStatus1;
        partSaveStatus1 = workPart.Save(NXOpen.BasePart.SaveComponents.True, NXOpen.BasePart.CloseAfterSave.False);

        partSaveStatus1.Dispose();
        // ----------------------------------------------
        //   Menu: File->Export->IGES...
        // ----------------------------------------------
        NXOpen.Session.UndoMarkId markId21;
        markId21 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");

        NXOpen.IgesCreator igesCreator1;
        igesCreator1 = theSession.DexManager.CreateIgesCreator();

        igesCreator1.ExportModelData = true;

        igesCreator1.ExportDrawings = true;

        igesCreator1.MapTabCylToBSurf = true;

        igesCreator1.BcurveTol = 0.0508;

        igesCreator1.IdenticalPointResolution = 0.001;

        igesCreator1.MaxThreeDMdlSpace = 10000.0;

        igesCreator1.ObjectTypes.Curves = true;

        igesCreator1.ObjectTypes.Surfaces = true;

        igesCreator1.ObjectTypes.Annotations = true;

        igesCreator1.ObjectTypes.Structures = true;

        igesCreator1.ObjectTypes.Solids = true;

        igesCreator1.OutputFile = part_name_igs;

        igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";

        igesCreator1.MaxLineThickness = 2.0;

        igesCreator1.SysDefmaxThreeDMdlSpace = true;

        igesCreator1.SysDefidenticalPointResolution = true;

        igesCreator1.InputFile = part_name_prt;

        igesCreator1.OutputFile = part_name_igs;

        theSession.SetUndoMarkName(markId21, "Export to IGES Options Dialog");

        igesCreator1.OutputFile = part_name_igs;

        NXOpen.Session.UndoMarkId markId22;
        markId22 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");

        theSession.DeleteUndoMark(markId22, null);

        NXOpen.Session.UndoMarkId markId23;
        markId23 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");

        igesCreator1.FileSaveFlag = false;

        igesCreator1.LayerMask = "1-256";

        igesCreator1.DrawingList = "";

        igesCreator1.ViewList = "Top,Front,Right,Back,Bottom,Left,Isometric,Trimetric,User Defined";

        NXOpen.NXObject nXObject3;
        nXObject3 = igesCreator1.Commit();

        theSession.DeleteUndoMark(markId23, null);

        theSession.SetUndoMarkName(markId21, "Export to IGES Options");

        igesCreator1.Destroy();

        // ----------------------------------------------
        //   Menu: Tools->Journal->Stop Recording
        // ----------------------------------------------

        Console.WriteLine("Finishing NX Golden Cantilever Journal");
    }
Beispiel #4
0
 public DatumPlane(DB.DatumPlane plane) : base(plane)
 {
 }
Beispiel #5
0
    public static void Main(string[] args)
    {
        NXOpen.Session theSession = NXOpen.Session.GetSession();
        // ----------------------------------------------
        //   Menu: File->New...
        // ----------------------------------------------

        //Variable Declaration
        double a = double.Parse(args[0]);
        double G = 1.618;
        double b = G * a;
        double L = 10;
        double t = double.Parse(args[1]);


        NXOpen.FileNew fileNew1;
        fileNew1 = theSession.Parts.FileNew();

        fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";

        fileNew1.UseBlankTemplate = false;

        fileNew1.ApplicationName = "ModelTemplate";

        fileNew1.Units = NXOpen.Part.Units.Millimeters;

        fileNew1.RelationType = "";

        fileNew1.UsesMasterModel = "No";

        fileNew1.TemplateType = NXOpen.FileNewTemplateType.Item;

        fileNew1.TemplatePresentationName = "Model";

        fileNew1.ItemType = "";

        fileNew1.Specialization = "";

        fileNew1.SetCanCreateAltrep(false);

        fileNew1.NewFileName = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.prt";

        fileNew1.MasterFileName = "";

        fileNew1.MakeDisplayedPart = true;

        NXOpen.NXObject nXObject1;
        nXObject1 = fileNew1.Commit();

        NXOpen.Part workPart    = theSession.Parts.Work;
        NXOpen.Part displayPart = theSession.Parts.Display;

        fileNew1.Destroy();

        theSession.ApplicationSwitchImmediate("UG_APP_MODELING");

        // ----------------------------------------------
        //   Menu: Insert->Sketch...
        // ----------------------------------------------

        NXOpen.Sketch nullNXOpen_Sketch = null;
        NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
        sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullNXOpen_Sketch);

        NXOpen.Unit       unit1 = (NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter");
        NXOpen.Expression expression1;
        expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);

        NXOpen.Expression expression2;
        expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);

        NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
        sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);

        sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";

        NXOpen.DatumPlane datumPlane1 = (NXOpen.DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) YZ plane");
        NXOpen.Point3d    point1      = new NXOpen.Point3d(0, 0, 0);
        sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);

        NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
        NXOpen.Point point2 = (NXOpen.Point)datumCsys1.FindObject("POINT 1");
        sketchInPlaceBuilder1.SketchOrigin = point2;

        sketchInPlaceBuilder1.PlaneOrFace.Value = null;

        sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;

        NXOpen.DatumAxis datumAxis1 = (NXOpen.DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
        sketchInPlaceBuilder1.Axis.Value = datumAxis1;

        theSession.Preferences.Sketch.CreateInferredConstraints = true;

        theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;

        theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;

        theSession.Preferences.Sketch.TextSizeFixed = true;

        theSession.Preferences.Sketch.FixedTextSize = 3.0;

        theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;

        theSession.Preferences.Sketch.DisplayObjectColor = false;

        theSession.Preferences.Sketch.DisplayObjectName = true;

        NXOpen.NXObject nXObject2;
        nXObject2 = sketchInPlaceBuilder1.Commit();

        NXOpen.Sketch           sketch1 = (NXOpen.Sketch)nXObject2;
        NXOpen.Features.Feature feature1;
        feature1 = sketch1.Feature;

        sketch1.Activate(NXOpen.Sketch.ViewReorient.True);

        sketchInPlaceBuilder1.Destroy();

        sketchAlongPathBuilder1.Destroy();

        try
        {
            // Expression is still in use.
            workPart.Expressions.Delete(expression2);
        }
        catch (NXException ex)
        {
            ex.AssertErrorCode(1050029);
        }

        try
        {
            // Expression is still in use.
            workPart.Expressions.Delete(expression1);
        }
        catch (NXException ex)
        {
            ex.AssertErrorCode(1050029);
        }

        // ----------------------------------------------
        //   Menu: Insert->Sketch Curve->Line...
        // ----------------------------------------------
        NXOpen.Point3d startPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
        NXOpen.Point3d endPoint1   = new NXOpen.Point3d(0, b, 0.0);
        NXOpen.Line    line1;
        line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);

        theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        //

        NXOpen.Point3d startPoint2 = new NXOpen.Point3d(0.0, b, 0.0);
        NXOpen.Point3d endPoint2   = new NXOpen.Point3d(L, a, 0.0);
        NXOpen.Line    line2;
        line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);

        theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        // ----------------------------------------------

        NXOpen.Point3d startPoint3 = new NXOpen.Point3d(L, a, 0.0);
        NXOpen.Point3d endPoint3   = new NXOpen.Point3d(L, 0.0, 0.0);
        NXOpen.Line    line3;
        line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);

        theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        // ----------------------------------------------
        NXOpen.Point3d startPoint4 = new NXOpen.Point3d(L, 0.0, 0.0);
        NXOpen.Point3d endPoint4   = new NXOpen.Point3d(0.0, 0.0, 0.0);
        NXOpen.Line    line4;
        line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);

        theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;

        theSession.ActiveSketch.Update();

        theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;

        // ----------------------------------------------
        //   Dialog Begin Line
        // ----------------------------------------------
        // ----------------------------------------------
        //   Menu: File->Finish Sketch
        // ----------------------------------------------
        theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);

        // ----------------------------------------------
        //   Menu: Insert->Design Feature->Extrude...
        // ----------------------------------------------

        NXOpen.Features.Feature nullNXOpen_Features_Feature = null;

        if (!workPart.Preferences.Modeling.GetHistoryMode())
        {
            throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
        }

        NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
        extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullNXOpen_Features_Feature);

        NXOpen.Section section1;
        section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);

        extrudeBuilder1.Section = section1;

        extrudeBuilder1.AllowSelfIntersectingSection(true);

        NXOpen.Unit unit2;
        unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;

        NXOpen.Expression expression7;
        expression7 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);

        extrudeBuilder1.DistanceTolerance = 0.01;

        extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;

        NXOpen.Body[] targetBodies1   = new NXOpen.Body[1];
        NXOpen.Body   nullNXOpen_Body = null;
        targetBodies1[0] = nullNXOpen_Body;
        extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);

        extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";

        extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = t.ToString();

        extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";

        extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";


        NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
        smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;

        smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;

        smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;

        section1.DistanceTolerance = 0.01;

        section1.ChainingTolerance = 0.0095;

        section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);

        NXOpen.Features.Feature[]     features1      = new NXOpen.Features.Feature[1];
        NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
        features1[0] = sketchFeature1;
        NXOpen.CurveFeatureRule curveFeatureRule1;
        curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);

        section1.AllowSelfIntersection(true);

        NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
        rules1[0] = curveFeatureRule1;
        NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
        section1.AddToSection(rules1, null, null, null, helpPoint1, NXOpen.Section.Mode.Create, false);

        NXOpen.Direction direction1;
        direction1 = workPart.Directions.CreateDirection(sketch1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);

        extrudeBuilder1.Direction = direction1;

        extrudeBuilder1.ParentFeatureInternal = false;

        NXOpen.Features.Feature feature2;
        feature2 = extrudeBuilder1.CommitFeature();

        NXOpen.Expression expression8 = extrudeBuilder1.Limits.StartExtend.Value;
        NXOpen.Expression expression9 = extrudeBuilder1.Limits.EndExtend.Value;
        extrudeBuilder1.Destroy();

        workPart.Expressions.Delete(expression7);

        // ----------------------------------------------
        //   Menu: Tools->Journal->Stop Recording
        // ----------------------------------------------
        // ----------------------------------------------
        //   Menu: File->Export->IGES...
        // ----------------------------------------------

        NXOpen.IgesCreator igesCreator1;
        igesCreator1 = theSession.DexManager.CreateIgesCreator();

        igesCreator1.ExportModelData = true;

        igesCreator1.ExportDrawings = true;

        igesCreator1.MapTabCylToBSurf = true;

        igesCreator1.BcurveTol = 0.0508;

        igesCreator1.IdenticalPointResolution = 0.001;

        igesCreator1.MaxThreeDMdlSpace = 10000.0;

        igesCreator1.ObjectTypes.Curves = true;

        igesCreator1.ObjectTypes.Surfaces = true;

        igesCreator1.ObjectTypes.Annotations = true;

        igesCreator1.ObjectTypes.Structures = true;

        igesCreator1.ObjectTypes.Solids = true;

        igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";

        igesCreator1.MaxLineThickness = 2.0;

        igesCreator1.SysDefmaxThreeDMdlSpace = true;

        igesCreator1.SysDefidenticalPointResolution = true;

        igesCreator1.InputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";

        igesCreator1.OutputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";

        igesCreator1.FileSaveFlag = false;

        igesCreator1.LayerMask = "1-256";

        igesCreator1.DrawingList = "";

        NXOpen.TaggedObject[] objects1 = new NXOpen.TaggedObject[0];
        igesCreator1.SetDrawingArray(objects1);

        NXOpen.NXObject nXObject20;
        nXObject20 = igesCreator1.Commit();

        igesCreator1.Destroy();

        while (!System.IO.File.Exists("J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs"))
        {
            System.Threading.Thread.Sleep(10);
        }
    }