Beispiel #1
0
        private void btnsetimpinjqt_Click(object sender, EventArgs e)
        {
            int ret;

            ret = IsAntSet();
            if (ret == -1)
            {
                MessageBox.Show("请选择操作天线");
                return;
            }
            else if (ret == 1)
            {
                DialogResult stat = DialogResult.OK;
                stat = MessageBox.Show("在未检测到天线的端口执行操作,真的要执行吗?", "警告",
                                       MessageBoxButtons.OKCancel, MessageBoxIcon.Question,
                                       MessageBoxDefaultButton.Button2);
                if (stat != DialogResult.OK)
                {
                    return;
                }
            }

            byte[] pwd = null;

            ret = Form1.IsValidPasswd(this.tbaccesspasswd.Text.Trim());
            {
                switch (ret)
                {
                case -3:
                    MessageBox.Show("访问密码不能为空");
                    break;

                case -2:
                case -4:
                    MessageBox.Show("访问密码必须是8个16进制数");
                    break;

                case -1:
                    MessageBox.Show("访问密码只能是16进制数字");
                    break;
                }
            }
            if (ret != 0)
            {
                return;
            }
            else
            {
                pwd = ByteFormat.FromHex(this.tbaccesspasswd.Text.Trim());
            }

            Gen2TagFilter filter = null;

            if (checkfilter(ref filter) != 0)
            {
                return;
            }

            if ((!this.rbimpinjqtread.Checked) && (!this.rbimpinjwrite.Checked))
            {
                MessageBox.Show("请选择命令类型");
                return;
            }

            try
            {
                if (this.rbimpinjqtread.Checked)
                {
                    IMPINJ_M4_QtPara para = new IMPINJ_M4_QtPara(pwd);

                    IMPINJ_M4_QtResult qtret = (IMPINJ_M4_QtResult)mrdr.CustomCmd(filter, CustomCmdType.IMPINJ_M4_Qt, para);
                    if (qtret.MemType == IMPINJ_M4_QtPara.IMPINJ_Qt_Mem_Type.IMPINJ_Qt_Mem_Private)
                    {
                        this.rbimpinjqtmemprivate.Checked = true;
                    }
                    else
                    {
                        this.rbimpinjqtmempublic.Checked = true;
                    }
                    if (qtret.RangeType == IMPINJ_M4_QtPara.IMPINJ_Qt_Range_Type.IMPINJ_Qt_Range_FarField)
                    {
                        this.rbimpinjqtfarfield.Checked = true;
                    }
                    else
                    {
                        this.rbimpinjqtnearfiled.Checked = true;
                    }
                }
                else
                {
                    if ((!rbimpinjqtnearfiled.Checked) && (!rbimpinjqtfarfield.Checked))
                    {
                        MessageBox.Show("请选择识别距离");
                        return;
                    }
                    if ((!rbimpinjqtmemprivate.Checked) && (!rbimpinjqtmempublic.Checked))
                    {
                        MessageBox.Show("请选择内存视图");
                        return;
                    }
                    if ((!rbimpinjqtperm.Checked) && (!rbimpinjqttemp.Checked))
                    {
                        MessageBox.Show("请选择状态类型");
                        return;
                    }

                    IMPINJ_M4_QtPara.IMPINJ_Qt_Range_Type   trange   = IMPINJ_M4_QtPara.IMPINJ_Qt_Range_Type.IMPINJ_Qt_Range_Invalid;
                    IMPINJ_M4_QtPara.IMPINJ_Qt_Persist_Type tpersist = IMPINJ_M4_QtPara.IMPINJ_Qt_Persist_Type.IMPINJ_Qt_Persist_Invalid;
                    IMPINJ_M4_QtPara.IMPINJ_Qt_Mem_Type     tmem     = IMPINJ_M4_QtPara.IMPINJ_Qt_Mem_Type.IMPINJ_Qt_Mem_Invalid;

                    if (rbimpinjqtnearfiled.Checked)
                    {
                        trange = IMPINJ_M4_QtPara.IMPINJ_Qt_Range_Type.IMPINJ_Qt_Range_NearField;
                    }
                    else
                    {
                        trange = IMPINJ_M4_QtPara.IMPINJ_Qt_Range_Type.IMPINJ_Qt_Range_FarField;
                    }
                    if (rbimpinjqtmemprivate.Checked)
                    {
                        tmem = IMPINJ_M4_QtPara.IMPINJ_Qt_Mem_Type.IMPINJ_Qt_Mem_Private;
                    }
                    else
                    {
                        tmem = IMPINJ_M4_QtPara.IMPINJ_Qt_Mem_Type.IMPINJ_Qt_Mem_Public;
                    }
                    if (rbimpinjqtperm.Checked)
                    {
                        tpersist = IMPINJ_M4_QtPara.IMPINJ_Qt_Persist_Type.IMPINJ_Qt_Persist_Perm;
                    }
                    else
                    {
                        tpersist = IMPINJ_M4_QtPara.IMPINJ_Qt_Persist_Type.IMPINJ_Qt_Persist_Temp;
                    }

                    IMPINJ_M4_QtPara para = new IMPINJ_M4_QtPara(pwd, tpersist, trange, tmem);
                    mrdr.CustomCmd(filter, CustomCmdType.IMPINJ_M4_Qt, para);
                }
            }
            catch (OpFaidedException notagexp)
            {
                if (notagexp.ErrCode == 0x400)
                {
                    MessageBox.Show("没法发现标签");
                }
                else
                {
                    MessageBox.Show("操作失败:" + notagexp.ToString());
                }

                return;
            }
            catch (Exception ex)
            {
                MessageBox.Show("操作失败:" + ex.ToString());
                return;
            }
        }
Beispiel #2
0
        private void btnResetReadProtect_Click(object sender, EventArgs e)
        {
            int ret;

            ret = IsAntSet();
            if (ret == -1)
            {
                MessageBox.Show("请选择操作天线");
                return;
            }
            else if (ret == 1)
            {
                DialogResult stat = DialogResult.OK;
                stat = MessageBox.Show("在未检测到天线的端口执行操作,真的要执行吗?", "警告",
                                       MessageBoxButtons.OKCancel, MessageBoxIcon.Question,
                                       MessageBoxDefaultButton.Button2);
                if (stat != DialogResult.OK)
                {
                    return;
                }
            }

            byte[] pwd = null;

            ret = Form1.IsValidPasswd(this.tbaccesspasswd.Text.Trim());
            {
                switch (ret)
                {
                case -3:
                    MessageBox.Show("访问密码不能为空");
                    break;

                case -2:
                case -4:
                    MessageBox.Show("访问密码必须是8个16进制数");
                    break;

                case -1:
                    MessageBox.Show("访问密码只能是16进制数字");
                    break;
                }
            }
            if (ret != 0)
            {
                return;
            }
            else
            {
                pwd = ByteFormat.FromHex(this.tbaccesspasswd.Text.Trim());
            }

            Gen2TagFilter filter = null;

            if (checkfilter(ref filter) != 0)
            {
                return;
            }

            try
            {
                NXP_ResetReadProtectPara para = new NXP_ResetReadProtectPara(pwd);
                mrdr.CustomCmd(filter, CustomCmdType.NXP_ResetReadProtect, para);
            }
            catch (OpFaidedException notagexp)
            {
                if (notagexp.ErrCode == 0x400)
                {
                    MessageBox.Show("没法发现标签");
                }
                else
                {
                    MessageBox.Show("操作失败:" + notagexp.ToString());
                }

                return;
            }
            catch (Exception ex)
            {
                MessageBox.Show("操作失败:" + ex.ToString());
                return;
            }
        }
Beispiel #3
0
        int checkfilter(ref Gen2TagFilter flt)
        {
            if (this.cbisfilter.Checked)
            {
                int ret = Form1.IsValidBinaryStr(this.tbfldata.Text.Trim());
                switch (ret)
                {
                case -3:
                    MessageBox.Show("匹配数据不能为空");
                    return(-1);

                case -1:
                    MessageBox.Show("匹配数据只能是二进制字符串");
                    return(-1);
                }

                if (ret != 0)
                {
                    return(-1);
                }
                if (this.cbbfilterbank.SelectedIndex == -1)
                {
                    MessageBox.Show("请选择过滤bank");
                    return(-1);
                }

                if (this.cbbfilterrule.SelectedIndex == -1)
                {
                    MessageBox.Show("请输入过滤规则");
                    return(-1);
                }

                int bitaddr = 0;
                if (this.tbfilteraddr.Text.Trim() == "")
                {
                    MessageBox.Show("请输入过滤bank的起始地址,以字为最小单位");
                    return(-1);
                }
                else
                {
                    try
                    {
                        bitaddr = int.Parse(this.tbfilteraddr.Text.Trim());
                    }
                    catch (Exception exc)
                    {
                        MessageBox.Show("起始地址请输入数字");
                        return(-1);
                    }
                    if (bitaddr < 0)
                    {
                        MessageBox.Show("地址必须大于零");
                        return(-1);
                    }
                }

                byte[] filterbytes = new byte[(this.tbfldata.Text.Trim().Length - 1) / 8 + 1];
                for (int c = 0; c < filterbytes.Length; ++c)
                {
                    filterbytes[c] = 0;
                }

                int bitcnt = 0;
                foreach (Char ch in this.tbfldata.Text.Trim())
                {
                    if (ch == '1')
                    {
                        filterbytes[bitcnt / 8] |= (byte)(0x01 << (7 - bitcnt % 8));
                    }
                    bitcnt++;
                }

                flt = new Gen2TagFilter(this.tbfldata.Text.Trim().Length, filterbytes,
                                        (MemBank)this.cbbfilterbank.SelectedIndex + 1, bitaddr,
                                        this.cbbfilterrule.SelectedIndex == 0 ? false : true);
                return(0);
            }
            flt = null;
            return(0);
        }
Beispiel #4
0
        private void btnbrl_Click(object sender, EventArgs e)
        {
            int ret;

            ret = IsAntSet();
            if (ret == -1)
            {
                MessageBox.Show("请选择操作天线");
                return;
            }
            else if (ret == 1)
            {
                DialogResult stat = DialogResult.OK;
                stat = MessageBox.Show("在未检测到天线的端口执行操作,真的要执行吗?", "警告",
                                       MessageBoxButtons.OKCancel, MessageBoxIcon.Question,
                                       MessageBoxDefaultButton.Button2);
                if (stat != DialogResult.OK)
                {
                    return;
                }
            }

            byte[] pwd = null;

            ret = Form1.IsValidPasswd(this.tbaccesspasswd.Text.Trim());
            {
                switch (ret)
                {
                case -3:
                    MessageBox.Show("访问密码不能为空");
                    break;

                case -2:
                case -4:
                    MessageBox.Show("访问密码必须是8个16进制数");
                    break;

                case -1:
                    MessageBox.Show("访问密码只能是16进制数字");
                    break;
                }
            }
            if (ret != 0)
            {
                return;
            }
            else
            {
                pwd = ByteFormat.FromHex(this.tbaccesspasswd.Text.Trim());
            }

            byte bitmap = 0;

            if (cb1.Checked)
            {
                bitmap |= 1 << 7;
            }
            if (cb2.Checked)
            {
                bitmap |= 1 << 6;
            }
            if (cb3.Checked)
            {
                bitmap |= 1 << 5;
            }
            if (cb4.Checked)
            {
                bitmap |= 1 << 4;
            }
            if (cb5.Checked)
            {
                bitmap |= 1 << 3;
            }
            if (cb6.Checked)
            {
                bitmap |= 1 << 2;
            }
            if (cb7.Checked)
            {
                bitmap |= 1 << 1;
            }
            if (cb8.Checked)
            {
                bitmap |= 1 << 0;
            }

            Gen2TagFilter filter = null;

            if (checkfilter(ref filter) != 0)
            {
                return;
            }

            try
            {
                ALIEN_Higgs3_BlockReadLockPara para = new ALIEN_Higgs3_BlockReadLockPara(bitmap, pwd);
                mrdr.CustomCmd(filter, CustomCmdType.ALIEN_Higgs3_BlockReadLock, para);
            }
            catch (OpFaidedException notagexp)
            {
                if (notagexp.ErrCode == 0x400)
                {
                    MessageBox.Show("没法发现标签");
                }
                else
                {
                    MessageBox.Show("操作失败:" + notagexp.ToString());
                }

                return;
            }
            catch (Exception ex)
            {
                MessageBox.Show("操作失败" + ex.ToString());
                return;
            }
        }
Beispiel #5
0
        private void btnChangeEAS_Click(object sender, EventArgs e)
        {
            int         ret;
            TagChipType nxpchiptype = TagChipType.TagChipType_None;

            ret = IsAntSet();
            if (ret == -1)
            {
                MessageBox.Show("请选择操作天线");
                return;
            }
            else if (ret == 1)
            {
                DialogResult stat = DialogResult.OK;
                stat = MessageBox.Show("在未检测到天线的端口执行操作,真的要执行吗?", "警告",
                                       MessageBoxButtons.OKCancel, MessageBoxIcon.Question,
                                       MessageBoxDefaultButton.Button2);
                if (stat != DialogResult.OK)
                {
                    return;
                }
            }

            if ((!this.rbEASset.Checked) && (!this.rbEASreset.Checked))
            {
                MessageBox.Show("请选择EAS状态");
                return;
            }

            if (this.cbbnxpchiptype.SelectedIndex == -1)
            {
                MessageBox.Show("请选择芯片类型");
                return;
            }
            else
            {
                if (this.cbbnxpchiptype.SelectedIndex == 0)
                {
                    nxpchiptype = TagChipType.TagChipType_NXP_G2X;
                }
                else if (this.cbbnxpchiptype.SelectedIndex == 1)
                {
                    nxpchiptype = TagChipType.TagChipType_NXP_G2i;
                }
            }

            bool isSet = false;

            if (this.rbEASset.Checked)
            {
                isSet = true;
            }
            else
            {
                isSet = false;
            }

            byte [] pwd = null;

            ret = Form1.IsValidPasswd(this.tbaccesspasswd.Text.Trim());
            {
                switch (ret)
                {
                case -3:
                    MessageBox.Show("访问密码不能为空");
                    break;

                case -2:
                case -4:
                    MessageBox.Show("访问密码必须是8个16进制数");
                    break;

                case -1:
                    MessageBox.Show("访问密码只能是16进制数字");
                    break;
                }
            }
            if (ret != 0)
            {
                return;
            }
            else
            {
                pwd = ByteFormat.FromHex(this.tbaccesspasswd.Text.Trim());
            }
            Gen2TagFilter filter = null;

            if (checkfilter(ref filter) != 0)
            {
                return;
            }
            NXP_ChangeEASPara ChEasPara = new NXP_ChangeEASPara(pwd, isSet, nxpchiptype);

            try
            {
                mrdr.CustomCmd(filter, CustomCmdType.NXP_ChangeEAS, ChEasPara);
            }
            catch (OpFaidedException notagexp)
            {
                if (notagexp.ErrCode == 0x400)
                {
                    MessageBox.Show("没法发现标签");
                }
                else
                {
                    MessageBox.Show("操作失败:" + notagexp.ToString());
                }

                return;
            }
            catch (Exception ex)
            {
                MessageBox.Show("ChangeEAS失败:" + ex.ToString());
                return;
            }
        }