static void Main()
{
Console.WriteLine("Username authentication required.");
Console.WriteLine("Provide a username and a password that match (ex. username:test password:test)");
Console.WriteLine(" Enter username:"******" Enter password:"******"*");
}
Console.WriteLine();
// <snippet1>
// Create the binding.
WSHttpBinding subsystemBinding = new WSHttpBinding();
subsystemBinding.Security.Mode = SecurityMode.Message;
subsystemBinding.Security.Message.ClientCredentialType =
MessageCredentialType.UserName;
// Create the endpoint address.
EndpointAddress ea = new
EndpointAddress("http://www.cohowinery.com:8000/FacadeService");
CalculatorClient client = new CalculatorClient(subsystemBinding, ea);
// Configure client with valid machine or domain account (username,password)
client.ClientCredentials.UserName.UserName = username;
client.ClientCredentials.UserName.Password = password.ToString();
// Call the Multiply service operation.
double value1 = 39D;
double value2 = 50.44D;
double result = client.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
//Closing the client gracefully closes the connection and cleans up resources
client.Close();
// </snippet1>
}
static void Main()
{
{
// <Snippet1>
// Configure custom certificate validation.
ClientCredentials creds = new ClientCredentials();
creds.ServiceCertificate.Authentication.CertificateValidationMode
= X509CertificateValidationMode.Custom;
creds.ServiceCertificate.Authentication.CustomCertificateValidator
= new MyCertificateValidator();
// </Snippet1>
}
{
// <Snippet2>
ClientCredentials creds = new ClientCredentials();
// Configure chain trust.
creds.ServiceCertificate.Authentication.CertificateValidationMode =
X509CertificateValidationMode.ChainTrust;
creds.ServiceCertificate.Authentication.RevocationMode =
X509RevocationMode.NoCheck;
// </Snippet2>
}
{
// <Snippet3>
ClientCredentials creds = new ClientCredentials();
// Configure chain trust.
creds.ServiceCertificate.Authentication.CertificateValidationMode
= X509CertificateValidationMode.ChainTrust;
creds.ServiceCertificate.Authentication.TrustedStoreLocation
= StoreLocation.LocalMachine;
// </Snippet3>
}
{
// <Snippet4>
ClientCredentials clientCreds =
new ClientCredentials();
Console.WriteLine(
clientCreds.ServiceCertificate.Authentication);
// </Snippet4>
}
// Create a client with given client endpoint configuration
CalculatorClient wcfClient = new CalculatorClient();
try
{
// set new credentials
wcfClient.ChannelFactory.Endpoint.Behaviors.Remove(typeof(ClientCredentials));
wcfClient.ChannelFactory.Endpoint.Behaviors.Add(new MyUserNameClientCredentials());
/*
* Setting the CertificateValidationMode to PeerOrChainTrust means that if the certificate
* is in the Trusted People store, then it will be trusted without performing a
* validation of the certificate's issuer chain. This setting is used here for convenience so that the
* sample can be run without having to have certificates issued by a certificate authority (CA).
* This setting is less secure than the default, ChainTrust. The security implications of this
* setting should be carefully considered before using PeerOrChainTrust in production code.
*/
wcfClient.ClientCredentials.ServiceCertificate.Authentication.CertificateValidationMode =
X509CertificateValidationMode.PeerOrChainTrust;
// <Snippet0>
ClientCredentials creds = new ClientCredentials();
// Configure peer trust.
creds.ServiceCertificate.Authentication.CertificateValidationMode =
X509CertificateValidationMode.PeerTrust;
// Configure chain trust.
creds.ServiceCertificate.Authentication.CertificateValidationMode =
X509CertificateValidationMode.ChainTrust;
// Configure custom certificate validation.
creds.ServiceCertificate.Authentication.CertificateValidationMode =
X509CertificateValidationMode.Custom;
creds.ServiceCertificate.Authentication.CustomCertificateValidator =
new MyCertificateValidator();
// </Snippet0>
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = wcfClient.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = wcfClient.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = wcfClient.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = wcfClient.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
wcfClient.Close();
}
catch (TimeoutException timeProblem)
{
Console.WriteLine("The service operation timed out. " + timeProblem.Message);
Console.ReadLine();
wcfClient.Abort();
}
catch (CommunicationException commProblem)
{
Console.WriteLine("There was a communication problem. " + commProblem.Message + commProblem.StackTrace);
Console.ReadLine();
wcfClient.Abort();
}
Console.WriteLine();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}
static void Main()
{
// Create a client with given client endpoint configuration. Make calls as Alice.
CalculatorClient client = new CalculatorClient();
// Set credentials to Alice
client.ClientCredentials.UserName.UserName = "******";
client.ClientCredentials.UserName.Password = "******";
try
{
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
client.Close();
}
catch (Exception e)
{
Console.WriteLine("Exception: {0}", e.Message);
if (e.InnerException != null)
{
Console.WriteLine("Inner Exception: {0}", e.InnerException.Message);
}
}
// Create a client with given client endpoint configuration. Make calls as Bob.
client = new CalculatorClient();
try
{
// Set credentials to Bob
client.ClientCredentials.UserName.UserName = "******";
client.ClientCredentials.UserName.Password = "******";
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
client.Close();
}
catch (Exception e)
{
Console.WriteLine("Exception: {0}", e.Message);
if (e.InnerException != null)
{
Console.WriteLine("Inner Exception: {0}", e.InnerException.Message);
}
}
// Create a client with given client endpoint configuration. Make calls as Charlie.
client = new CalculatorClient();
try
{
// Set credentials to Charlie
client.ClientCredentials.UserName.UserName = "******";
client.ClientCredentials.UserName.Password = "******";
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
client.Close();
}
catch (Exception e)
{
Console.WriteLine("Exception: {0}", e.Message);
if (e.InnerException != null)
{
Console.WriteLine("Inner Exception: {0}", e.InnerException.Message);
}
}
Console.WriteLine();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}
static void Main()
{
Console.WriteLine("Username authentication required.");
Console.WriteLine(" Please enter a valid domain email address:");
string username = Console.ReadLine();
Console.WriteLine(" Enter password:"******"";
ConsoleKeyInfo info = Console.ReadKey(true);
while (info.Key != ConsoleKey.Enter)
{
if (info.Key != ConsoleKey.Backspace)
{
password += info.KeyChar;
info = Console.ReadKey(true);
}
else if (info.Key == ConsoleKey.Backspace)
{
if (password != "")
{
password = password.Substring(0, password.Length - 1);
}
info = Console.ReadKey(true);
}
}
for (int i = 0; i < password.Length; i++)
{
Console.Write("*");
}
Console.WriteLine();
// Create a client with given client endpoint configuration
CalculatorClient client = new CalculatorClient();
client.ClientCredentials.UserName.UserName = username;
client.ClientCredentials.UserName.Password = password;
/*
* Setting the CertificateValidationMode to PeerOrChainTrust means that if the certificate
* is in the Trusted People store, then it will be trusted without performing a
* validation of the certificate's issuer chain. This setting is used here for convenience so that the
* sample can be run without having to have certificates issued by a certificate authority (CA).
* This setting is less secure than the default, ChainTrust. The security implications of this
* setting should be carefully considered before using PeerOrChainTrust in production code.
*/
client.ClientCredentials.ServiceCertificate.Authentication.CertificateValidationMode = System.ServiceModel.Security.X509CertificateValidationMode.PeerOrChainTrust;
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
client.Close();
Console.WriteLine();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}
static void Main()
{
// Create a wcfClient with Username endpoint configuration
CalculatorClient wcfClient = new CalculatorClient("Username");
try
{
wcfClient.ClientCredentials.UserName.UserName = "******";
wcfClient.ClientCredentials.UserName.Password = "******";
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = proxy.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = proxy.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = proxy.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = proxy.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
wcfClient.Close();
}
catch (TimeoutException timeProblem)
{
Console.WriteLine("The service operation timed out. " + timeProblem.Message);
Console.ReadLine();
wcfClient.Abort();
}
catch (CommunicationException commProblem)
{
Console.WriteLine("There was a communication problem. " + commProblem.Message + commProblem.StackTrace);
Console.ReadLine();
wcfClient.Abort();
}
// Create a wcfClient with Certificate endpoint configuration
CalculatorClient eptwcfClient = new CalculatorClient("Certificate");
try
{
// <Snippet00>
ChannelFactory <ISimpleChannel> cf =
new ChannelFactory <ISimpleChannel>();
cf.Credentials.ClientCertificate.SetCertificate(
StoreLocation.CurrentUser, StoreName.My,
X509FindType.FindByThumbprint,
"37 28 05 09 22 81 07 08 a0 cd 2a af dd c3 83 cd c3 3b 8f 9d");
cf.Credentials.ServiceCertificate.SetDefaultCertificate(
StoreLocation.CurrentUser,
StoreName.TrustedPeople,
X509FindType.FindByThumbprint,
"33 93 68 cc 7c 75 80 24 a2 80 9f 45 8c 81 fa 92 ad 5b 04 39");
cf.Credentials.ServiceCertificate.Authentication.CertificateValidationMode
= X509CertificateValidationMode.PeerOrChainTrust;
// </Snippet00>
eptwcfClient.ClientCredentials.ClientCertificate.SetCertificate
(StoreLocation.CurrentUser,
StoreName.TrustedPeople,
X509FindType.FindBySubjectName, "test1");
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = proxy.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = proxy.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = proxy.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = proxy.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
eptwcfClient.Close();
}
catch (TimeoutException timeProblem)
{
Console.WriteLine("The service operation timed out. " + timeProblem.Message);
Console.ReadLine();
eptwcfClient.Abort();
}
catch (CommunicationException commProblem)
{
Console.WriteLine("There was a communication problem. " + commProblem.Message + commProblem.StackTrace);
Console.ReadLine();
eptwcfClient.Abort();
}
Console.WriteLine();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}
static void Main()
{
// Create a client using either wsat or oletx endpoint configurations
CalculatorClient client = new CalculatorClient("WSAtomicTransaction_endpoint");
// CalculatorClient client = new CalculatorClient("OleTransactions_endpoint");
// Start a transaction scope
using (TransactionScope tx =
new TransactionScope(TransactionScopeOption.RequiresNew))
{
Console.WriteLine("Starting transaction");
// Call the Add service operation
// - generatedClient will flow the required active transaction
double value1 = 100.00D;
double value2 = 15.99D;
double result = client.Add(value1, value2);
Console.WriteLine(" Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation
// - generatedClient will flow the allowed active transaction
value1 = 145.00D;
value2 = 76.54D;
result = client.Subtract(value1, value2);
Console.WriteLine(" Subtract({0},{1}) = {2}", value1, value2, result);
// Start a transaction scope that suppresses the current transaction
using (TransactionScope txSuppress =
new TransactionScope(TransactionScopeOption.Suppress))
{
// Call the Subtract service operation
// - the active transaction is suppressed from the generatedClient
// and no transaction will flow
value1 = 21.05D;
value2 = 42.16D;
result = client.Subtract(value1, value2);
Console.WriteLine(" Subtract({0},{1}) = {2}", value1, value2, result);
// Complete the suppressed scope
txSuppress.Complete();
}
// Call the Multiply service operation
// - generatedClient will not flow the active transaction
value1 = 9.00D;
value2 = 81.25D;
result = client.Multiply(value1, value2);
Console.WriteLine(" Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
// - generatedClient will not flow the active transaction
value1 = 22.00D;
value2 = 7.00D;
result = client.Divide(value1, value2);
Console.WriteLine(" Divide({0},{1}) = {2}", value1, value2, result);
// Complete the transaction scope
Console.WriteLine(" Completing transaction");
tx.Complete();
}
Console.WriteLine("Transaction committed");
// Closing the client gracefully closes the connection and cleans up resources
client.Close();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}
static void Main()
{
Console.WriteLine("Username authentication required.");
Console.WriteLine("Provide a valid machine or domain account. [domain\\user]");
Console.WriteLine(" Enter username:"******" Enter password:"******"*");
}
Console.WriteLine();
// Create a client
CalculatorClient client = new CalculatorClient();
// Configure client with valid machine or domain account (username,password)
client.ClientCredentials.UserName.UserName = username;
client.ClientCredentials.UserName.Password = password.ToString();
// Call GetCallerIdentity service operation
Console.WriteLine(client.GetCallerIdentity());
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
//Closing the client gracefully closes the connection and cleans up resources
client.Close();
Console.WriteLine();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}
static void Main()
{
Console.WriteLine("Username authentication required.");
Console.WriteLine("Provide a valid machine or domain account. [domain\\user]");
Console.WriteLine(" Enter username:"******" Enter password:"******"*");
}
Console.WriteLine();
// WARNING: This code is only needed for test certificates such as those created by makecert. It is
// not recommended for production code.
PermissiveCertificatePolicy.Enact("CN=ServiceModelSamples-HTTPS-Server");
// Create a client with given client endpoint configuration
CalculatorClient client = new CalculatorClient();
// Setup the UserName credential
client.ClientCredentials.UserName.UserName = username;
client.ClientCredentials.UserName.Password = password.ToString();
// Call the GetCallerIdentity service operation
Console.WriteLine(client.GetCallerIdentity());
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
client.Close();
Console.WriteLine();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}
static void Main()
{
// Create a client with Username endpoint configuration
CalculatorClient client1 = new CalculatorClient("Username");
client1.ClientCredentials.UserName.UserName = "******";
client1.ClientCredentials.UserName.Password = "******";
try
{
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client1.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client1.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client1.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client1.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
}
catch (Exception e)
{
Console.WriteLine("Call failed : {0}", e.Message);
}
client1.Close();
// Create a client with Certificate endpoint configuration
CalculatorClient client2 = new CalculatorClient("Certificate");
client2.ClientCredentials.ClientCertificate.SetCertificate(StoreLocation.CurrentUser, StoreName.My, X509FindType.FindBySubjectName, "test1");
try
{
// Call the Add service operation.
double value1 = 100.00D;
double value2 = 15.99D;
double result = client2.Add(value1, value2);
Console.WriteLine("Add({0},{1}) = {2}", value1, value2, result);
// Call the Subtract service operation.
value1 = 145.00D;
value2 = 76.54D;
result = client2.Subtract(value1, value2);
Console.WriteLine("Subtract({0},{1}) = {2}", value1, value2, result);
// Call the Multiply service operation.
value1 = 9.00D;
value2 = 81.25D;
result = client2.Multiply(value1, value2);
Console.WriteLine("Multiply({0},{1}) = {2}", value1, value2, result);
// Call the Divide service operation.
value1 = 22.00D;
value2 = 7.00D;
result = client2.Divide(value1, value2);
Console.WriteLine("Divide({0},{1}) = {2}", value1, value2, result);
}
catch (Exception e)
{
Console.WriteLine("Call failed : {0}", e.Message);
}
client2.Close();
Console.WriteLine();
Console.WriteLine("Press <ENTER> to terminate client.");
Console.ReadLine();
}