/// <summary>
/// Writes the file from the package directly to the response and set the appropriate
/// content type in the response. If the response is provided and the path extension is not
/// in the list of files to use IIS compatibility mode, this is much faster than
/// copying the file contents to the output stream and should be used whenever possible.
/// If there is no response object, the method reverts to copying the file between streams.
/// </summary>
/// <param name="relativePath">The package-relative path to the file to render.</param>
internal void WriteFileToResponse(string relativePath)
{
// Set the mime type on the response
string pathExtension = Path.GetExtension(relativePath);
SetOutputStreamExtension(pathExtension);
using (Disposer disposer = new Disposer())
{
PackageReader pkgReader = m_session.GetPackageReader();
disposer.Push(pkgReader);
// If the response was provided (which it will be, in most non-test cases), then
// do the TransmitFile or WriteFile. Otherwise, copy the streams to the response output stream.
if (Response != null)
{
// If we are to use Compatibility mode, then write the file
if (UseCompatibilityMode(pathExtension))
{
Stream packageFile = pkgReader.GetFileStream(relativePath);
WriteIisCompatibilityModeToResponse(packageFile);
}
#if DOTNET40
else if (FileIsHtml(pathExtension))
{
SendHtmlChangingCssHref(pkgReader.GetFileStream(relativePath));
}
else if (FileIsJavascript(pathExtension))
{
SendJavascriptChangingCssHref(pkgReader.GetFileStream(relativePath));
}
#endif
else
{
pkgReader.TransmitFile(relativePath, m_context.Response);
}
}
else
{
DetachableStream outputDS = new DetachableStream(OutputStream);
disposer.Push(outputDS);
Stream packageFile = pkgReader.GetFileStream(relativePath);
disposer.Push(packageFile);
Utilities.CopyStream(packageFile, ImpersonationBehavior.UseImpersonatedIdentity, outputDS, ImpersonationBehavior.UseImpersonatedIdentity);
outputDS.Detach();
}
}
}
/// <summary>
/// Writes the file from a byte array directly to the response. The output stream
/// extension must be set prior to calling this method.
/// If the response is provided and the path extension is not
/// in the list of files to use IIS compatibility mode, this is much faster than
/// copying the file contents to the output stream and should be used whenever possible.
/// If there is no response object, the method reverts to copying the file between streams.
/// </summary>
/// <param name="fileBytes">The file to render.</param>
internal void WriteFileToResponse(byte[] fileBytes)
{
using (Disposer disposer = new Disposer())
{
// Open a stream on the file. For some odd reason fxcop does not acknowledge the ability of disposer
// to actually dispose fileStream, so we give it its own using block.
using (Stream fileStream = new MemoryStream(fileBytes))
{
// If the response was provided (which it will be, in most non-test cases), then
// do the TransmitFile or WriteFile. Otherwise, copy the streams to the response output stream.
if (Response != null)
{
// IisCompatibilityMode is not considered here, because in no case do we have a file
// path that can be read by TransmitFile.
WriteIisCompatibilityModeToResponse(fileStream);
}
else
{
DetachableStream outputDS = new DetachableStream(OutputStream);
disposer.Push(outputDS);
Utilities.CopyStream(fileStream, ImpersonationBehavior.UseImpersonatedIdentity, outputDS, ImpersonationBehavior.UseImpersonatedIdentity);
outputDS.Detach();
}
}
}
}
[System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Reliability", "CA2000:DisposeObjectsBeforeLosingScope")] // the writer is disposed for all code paths
internal static void CopyStream(Stream fromStream, ImpersonationBehavior readImpersonationBehavior, Stream toStream, ImpersonationBehavior writeImpersonationBehavior)
{
using (Disposer disposer = new Disposer())
{
DetachableStream dsToStream = new DetachableStream(toStream);
disposer.Push(dsToStream);
BinaryWriter writer = new BinaryWriter(dsToStream);
disposer.Push(writer);
// An addition revert during write operations is required if the setting for reading and writing
// is not the same
bool requiresWriteRevert = (readImpersonationBehavior != writeImpersonationBehavior);
using (ImpersonateIdentity readId = new ImpersonateIdentity(readImpersonationBehavior))
{
byte[] bytesIn = new byte[65536];
int bytesRead;
while ((bytesRead = fromStream.Read(bytesIn, 0, bytesIn.Length)) != 0)
{
// If we have to impersonate to write, then do it. Otherwise skip it.
if (requiresWriteRevert)
{
using (ImpersonateIdentity id = new ImpersonateIdentity(writeImpersonationBehavior))
{
writer.Write(bytesIn, 0, bytesRead);
}
}
else
{
writer.Write(bytesIn, 0, bytesRead);
}
}
}
dsToStream.Detach();
}
}
/// <summary>
/// Recursively copy from one folder to another by reading the files into memory.
/// </summary>
/// <param name="fromDir">The folder to copy from.</param>
/// <param name="fromImpersonationBehavior">The identity that has rights to read the <paramref name="fromDir"/>.</param>
/// <param name="toDir">The folder to write to. Writing is not done in an impersonation block.</param>
private static void RecursiveCopyStreams(DirectoryInfo fromDir, ImpersonationBehavior fromImpersonationBehavior, DirectoryInfo toDir)
{
FileInfo[] files;
using (ImpersonateIdentity id = new ImpersonateIdentity(fromImpersonationBehavior))
{
files = fromDir.GetFiles();
}
foreach (FileInfo file in files)
{
using(Disposer disposer = new Disposer())
{
FileStream fromStream;
using (ImpersonateIdentity id = new ImpersonateIdentity(fromImpersonationBehavior))
{
fromStream = file.OpenRead();
disposer.Push(fromStream);
}
string toPath = PackageReader.SafePathCombine(toDir.FullName, file.Name);
FileInfo toFileInfo = new FileInfo(toPath);
FileStream toStream = toFileInfo.OpenWrite();
disposer.Push(toStream);
Utilities.CopyStream(fromStream, fromImpersonationBehavior, toStream, ImpersonationBehavior.UseImpersonatedIdentity);
}
}
foreach (DirectoryInfo sub in fromDir.GetDirectories())
{
DirectoryInfo newSub = Directory.CreateDirectory(Path.Combine(toDir.FullName, sub.Name));
RecursiveCopy(sub, newSub);
}
}
/// <summary>
/// Writes the file from a byte array directly to the response. The output stream
/// extension must be set prior to calling this method.
/// If the response is provided and the path extension is not
/// in the list of files to use IIS compatibility mode, this is much faster than
/// copying the file contents to the output stream and should be used whenever possible.
/// If there is no response object, the method reverts to copying the file between streams.
/// </summary>
/// <param name="fileBytes">The file to render.</param>
internal void WriteFileToResponse(byte[] fileBytes)
{
using (Disposer disposer = new Disposer())
{
// Open a stream on the file. For some odd reason fxcop does not acknowledge the ability of disposer
// to actually dispose fileStream, so we give it its own using block.
using (Stream fileStream = new MemoryStream(fileBytes))
{
// If the response was provided (which it will be, in most non-test cases), then
// do the TransmitFile or WriteFile. Otherwise, copy the streams to the response output stream.
if (Response != null)
{
// IisCompatibilityMode is not considered here, because in no case do we have a file
// path that can be read by TransmitFile.
WriteIisCompatibilityModeToResponse(fileStream);
}
else
{
DetachableStream outputDS = new DetachableStream(OutputStream);
disposer.Push(outputDS);
Utilities.CopyStream(fileStream, ImpersonationBehavior.UseImpersonatedIdentity, outputDS, ImpersonationBehavior.UseImpersonatedIdentity);
outputDS.Detach();
}
}
}
}
/// <summary>
/// Writes the file from the package directly to the response and set the appropriate
/// content type in the response. If the response is provided and the path extension is not
/// in the list of files to use IIS compatibility mode, this is much faster than
/// copying the file contents to the output stream and should be used whenever possible.
/// If there is no response object, the method reverts to copying the file between streams.
/// </summary>
/// <param name="relativePath">The package-relative path to the file to render.</param>
internal void WriteFileToResponse(string relativePath)
{
// Set the mime type on the response
string pathExtension = Path.GetExtension(relativePath);
SetOutputStreamExtension(pathExtension);
using(Disposer disposer = new Disposer())
{
PackageReader pkgReader = m_session.GetPackageReader();
disposer.Push(pkgReader);
// If the response was provided (which it will be, in most non-test cases), then
// do the TransmitFile or WriteFile. Otherwise, copy the streams to the response output stream.
if (Response != null)
{
// If we are to use Compatibility mode, then write the file
if (UseCompatibilityMode(pathExtension))
{
Stream packageFile = pkgReader.GetFileStream(relativePath);
WriteIisCompatibilityModeToResponse(packageFile);
}
else
{
pkgReader.TransmitFile(relativePath, m_context.Response);
}
}
else
{
DetachableStream outputDS = new DetachableStream(OutputStream);
disposer.Push(outputDS);
Stream packageFile = pkgReader.GetFileStream(relativePath);
disposer.Push(packageFile);
Utilities.CopyStream(packageFile, ImpersonationBehavior.UseImpersonatedIdentity, outputDS, ImpersonationBehavior.UseImpersonatedIdentity);
outputDS.Detach();
}
}
}
[System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Reliability", "CA2000:DisposeObjectsBeforeLosingScope")] // the writer is disposed for all code paths
internal static void CopyStream(Stream fromStream, ImpersonationBehavior readImpersonationBehavior, Stream toStream, ImpersonationBehavior writeImpersonationBehavior)
{
using (Disposer disposer = new Disposer())
{
DetachableStream dsToStream = new DetachableStream(toStream);
disposer.Push(dsToStream);
BinaryWriter writer = new BinaryWriter(dsToStream);
disposer.Push(writer);
// An addition revert during write operations is required if the setting for reading and writing
// is not the same
bool requiresWriteRevert = (readImpersonationBehavior != writeImpersonationBehavior);
using (ImpersonateIdentity readId = new ImpersonateIdentity(readImpersonationBehavior))
{
byte[] bytesIn = new byte[65536];
int bytesRead;
while ((bytesRead = fromStream.Read(bytesIn, 0, bytesIn.Length)) != 0)
{
// If we have to impersonate to write, then do it. Otherwise skip it.
if (requiresWriteRevert)
{
using (ImpersonateIdentity id = new ImpersonateIdentity(writeImpersonationBehavior))
{
writer.Write(bytesIn, 0, bytesRead);
}
}
else
{
writer.Write(bytesIn, 0, bytesRead);
}
}
}
dsToStream.Detach();
}
}
/// <summary>
/// Get the schema information for this store from the cache or from the database.
/// </summary>
/// <param name="connectionString">Connection string used to access the store.</param>
/// <param name="impersonationBehavior">Identifies which <c>WindowsIdentity</c> is used to
/// access the database when impersonation is involved.</param>
/// <param name="debugLog">Location to which the debug log should be written, or
/// null if there isn't a debug log.</param>
/// <returns>The schema information.</returns>
private static LearningStoreSchema GetSchemaInformationFromCache(string connectionString,
ImpersonationBehavior impersonationBehavior, TextWriter debugLog)
{
// Try to find the connection in the cache
lock (s_allSchemasLock)
{
LearningStoreSchema schema;
if (s_allSchemas.TryGetValue(connectionString, out schema))
{
return(schema);
}
}
// Not found in the cache -- so go get it from the database
// This try/catch block is here for security reasons. Search MSDN for
// "WrapVulnerableFinallyClausesInOuterTry" to see details.
try
{
WindowsImpersonationContext impersonationContext = null;
try
{
// Impersonate if necessary
if (impersonationBehavior == ImpersonationBehavior.UseOriginalIdentity)
{
// Not adding it to the disposer, since that could fail (e.g., OutOfMemoryException),
// which could cause a security hole. Instead, we'll clean it up manually later.
impersonationContext = WindowsIdentity.Impersonate(IntPtr.Zero);
}
using (Microsoft.LearningComponents.Disposer disposer = new Microsoft.LearningComponents.Disposer())
{
// Create a connection
SqlConnection connection = new SqlConnection(connectionString);
disposer.Push(connection);
connection.Open();
// Create a command to retrieve information from the configuration table
LogableSqlCommand command = new LogableSqlCommand(connection, debugLog);
disposer.Push(command);
// Execute
command.Execute(
"SELECT EngineVersion,\r\n" +
" SchemaDefinition\r\n" +
"FROM Configuration\r\n");
// Read return values from the database
if (!command.Read())
{
throw new LearningComponentsInternalException("LSTR1500");
}
if (command.GetFieldCount() != 2)
{
throw new LearningComponentsInternalException("LSTR1510");
}
int engineVersion = command.GetInt32(0);
SqlXml schemaXml = command.GetSqlXml(1);
XPathDocument schemaDoc;
using (XmlReader reader = schemaXml.CreateReader())
{
schemaDoc = new XPathDocument(reader);
}
LearningStoreSchema newSchema = LearningStoreSchema.CreateSchema(schemaDoc);
if (command.Read())
{
throw new LearningComponentsInternalException("LSTR1520");
}
if (command.NextResult())
{
throw new LearningComponentsInternalException("LSTR1530");
}
// Fail if a different engine created this
if (engineVersion != LearningStore.EngineVersion)
{
throw new InvalidOperationException(LearningStoreStrings.IncompatibleEngineVersion);
}
// Save it in the cache
lock (s_allSchemasLock)
{
LearningStoreSchema schema;
if (s_allSchemas.TryGetValue(connectionString, out schema))
{
return(schema);
}
s_allSchemas.Add(connectionString, newSchema);
}
return(newSchema);
}
}
finally
{
if (impersonationContext != null)
{
impersonationContext.Dispose();
}
}
}
catch
{
throw;
}
}
