public void Regress184573()
{
// The contents of the project file that we'll be testing. Look at the
// right side, for a cleaner copy without all the escaping.
char c = '�';
string projectFileContents = new string(c,1);
// Create a temp file on disk with the above contents.
string projectFilename;
this.CreateTemporaryProjectFile(projectFileContents, out projectFilename);
// Instantiate our class with the project file.
OldVSProjectFileReader reader = new OldVSProjectFileReader(projectFilename);
// Read the whole file into a string.
string wholeFile = reader.ReadToEnd();
Assert.IsTrue(wholeFile.Length > 0, "High-bit character was stripped.");
// Create two different encodings.
Encoding defaultEncoding = Encoding.Default;
Encoding unicode = Encoding.Unicode;
// Convert the string into a byte array.
byte[] unicodeBytes = unicode.GetBytes(projectFileContents);
// Perform the conversion from one encoding to the other.
byte[] defaultEncodingBytes = Encoding.Convert(unicode, defaultEncoding, unicodeBytes);
// Convert the new byte[] into a char[] and then into a string.
char[] defaultEncodingChars = new char[defaultEncoding.GetCharCount(defaultEncodingBytes, 0, defaultEncodingBytes.Length)];
defaultEncoding.GetChars(defaultEncodingBytes, 0, defaultEncodingBytes.Length, defaultEncodingChars, 0);
Assert.IsTrue(defaultEncodingChars.Length > 0);
Assert.IsTrue(wholeFile[0] == defaultEncodingChars[0], String.Format("Expected ANSI encoding of '{0}' to result in '{0}'. Instead it was '{1}'", c, defaultEncodingChars[0], wholeFile[0])
);
// Clean up.
reader.Close();
this.DeleteTemporaryProjectFile(projectFilename);
}
public void NoSpecialCharacters
(
)
{
// The contents of the project file that we'll be testing. Look at the
// right side, for a cleaner copy without all the escaping.
string projectFileContents =
"<VisualStudioProject>\r\n" + // <VisualStudioProject>
"\r\n" + //
" <VisualBasic\r\n" + // <VisualBasic
" ProjectType = \"Local\"\r\n" + // ProjectType = "Local"
" ProductVersion = \"7.10.3022\"\r\n" + // ProductVersion = "7.10.3022"
" >\r\n" + // >
" </VisualBasic>\r\n" + // </VisualBasic>
"\r\n" + //
"</VisualStudioProject>\r\n"; // </VisualStudioProject>
// Create a temp file on disk with the above contents.
string projectFilename;
this.CreateTemporaryProjectFile(projectFileContents, out projectFilename);
// Instantiate our class with the project file.
OldVSProjectFileReader reader = new OldVSProjectFileReader(projectFilename);
// Create a buffer to hold 20 characters.
char[] characterBuffer = new char[20];
int exceptionCount = 0;
int charactersRead = 0;
// Read the first 20 characters into our buffer.
charactersRead = reader.Read(characterBuffer, 0, 20);
Assert.AreEqual(20, charactersRead);
Assert.AreEqual("<VisualStudioProject", new string(characterBuffer));
// Read the next 20 characters into our buffer.
charactersRead = reader.Read(characterBuffer, 0, 20);
Assert.AreEqual(20, charactersRead);
Assert.AreEqual(">\r\n\r\n <VisualBasic\r", new string(characterBuffer));
// Read the next 10 characters into our buffer starting at position 5.
charactersRead = reader.Read(characterBuffer, 5, 10);
Assert.AreEqual(10, charactersRead);
Assert.AreEqual(">\r\n\r\n\n Projeasic\r", new string(characterBuffer));
// Try reading the next 30 characters. Since there's not enough room in our
// buffer for 30 characters, this will fail.
try
{
charactersRead = reader.Read(characterBuffer, 5, 30);
}
catch (ArgumentException)
{
exceptionCount++;
}
// Confirm that the proper exception was thrown and that the buffer
// was not touched.
Assert.AreEqual(1, exceptionCount);
Assert.AreEqual(">\r\n\r\n\n Projeasic\r", new string(characterBuffer));
// Read to the end of the current line.
string readLine = reader.ReadLine();
Assert.AreEqual("ctType = \"Local\"", readLine);
// Read the next line.
readLine = reader.ReadLine();
Assert.AreEqual(" ProductVersion = \"7.10.3022\"", readLine);
// Read the next character.
int character = reader.Read();
Assert.AreEqual(' ', character);
// Read the next character.
character = reader.Read();
Assert.AreEqual(' ', character);
// Peek at the next character, but don't advance the read pointer.
character = reader.Peek();
Assert.AreEqual('>', character);
// Read the next 20 characters into our buffer.
charactersRead = reader.Read(characterBuffer, 0, 20);
// Read the next 20 characters into our buffer.
charactersRead = reader.Read(characterBuffer, 0, 20);
// Read the next 20 characters into our buffer. But actually, since
// we're almost at the end of the file, we expect that only 7 characters
// will actually be read.
charactersRead = reader.Read(characterBuffer, 0, 20);
Assert.AreEqual(7, charactersRead);
Assert.AreEqual("ject>\r\nsualStudioPro", new string(characterBuffer));
// Read the next 20 characters into our buffer. Now, we're really
// at the end of the file already, so it should come back with zero
// characters read.
charactersRead = reader.Read(characterBuffer, 0, 20);
Assert.AreEqual(0, charactersRead);
Assert.AreEqual("ject>\r\nsualStudioPro", new string(characterBuffer));
// Clean up.
reader.Close();
this.DeleteTemporaryProjectFile(projectFilename);
}
public void Regress322573
(
)
{
// The contents of the project file that we'll be testing.
string projectFileContents =
"<Elem1 StartArguments = \"???action=16&requestid=1000036CA053601F66928BF0550E395A714E72C8D6066??? /HeadTraxStartversion 5.6.0.66 /RunningFromHeadTraxStart yes /HTXMutexName HTXMutex344\"/>";
// Create a temp file on disk with the above contents.
string projectFilename;
this.CreateTemporaryProjectFile(projectFileContents, out projectFilename);
// Instantiate our class with the project file.
OldVSProjectFileReader reader = new OldVSProjectFileReader(projectFilename);
// Read the whole file into a string. Confirm that the & character within
// an attribute value got translated correctly.
string wholeFile = reader.ReadToEnd();
Assert.AreEqual("<Elem1 StartArguments = \"???action=16&requestid=1000036&#14CA053601F66928BF0550E395A714E72C8D6066??? /HeadTraxStartversion 5.6.0.66 /RunningFromHeadTraxStart yes /HTXMutexName HTXMutex344\"/>\r\n",
wholeFile);
// Clean up.
reader.Close();
this.DeleteTemporaryProjectFile(projectFilename);
}
public void AttributeValueUsingSingleQuotes
(
)
{
// The contents of the project file that we'll be testing.
string projectFileContents =
"<Elem1 Attrib1 = '1234<56789 is a \"true\" statement'/>";
// Create a temp file on disk with the above contents.
string projectFilename;
this.CreateTemporaryProjectFile(projectFileContents, out projectFilename);
// Instantiate our class with the project file.
OldVSProjectFileReader reader = new OldVSProjectFileReader(projectFilename);
// Read the whole file into a string. Confirm that the < and > characters within
// an attribute value got translated correctly, but the < and > characters occurring
// *outside* an attribute value are not touched.
string wholeFile = reader.ReadToEnd();
Assert.AreEqual("<Elem1 Attrib1 = '1234<56789 is a \"true\" statement'/>\r\n",
wholeFile);
// Clean up.
reader.Close();
this.DeleteTemporaryProjectFile(projectFilename);
}
public void MultipleElementsOnSameLine
(
)
{
// The contents of the project file that we'll be testing. Look at the
// right side, for a cleaner copy without all the escaping.
string projectFileContents =
"<Elem1 Attrib1=\"bl>>ah\"/><Elem2 Attrib2=\"bl<<oo\"/>"; // <Elem1 Attrib1="bl>>ah"/><Elem2 Attrib2="bl<<oo"/>
// Create a temp file on disk with the above contents.
string projectFilename;
this.CreateTemporaryProjectFile(projectFileContents, out projectFilename);
// Instantiate our class with the project file.
OldVSProjectFileReader reader = new OldVSProjectFileReader(projectFilename);
// Read the whole file into a string. Confirm that the < and > characters within
// an attribute value got translated correctly, but the < and > characters occurring
// *outside* an attribute value are not touched.
string wholeFile = reader.ReadToEnd();
Assert.AreEqual("<Elem1 Attrib1=\"bl>>ah\"/><Elem2 Attrib2=\"bl<<oo\"/>\r\n",
wholeFile);
// Clean up.
reader.Close();
this.DeleteTemporaryProjectFile(projectFilename);
}
public void XmlAttributesWithSpecialCharacters
(
)
{
// The contents of the project file that we'll be testing. Look at the
// right side, for a cleaner copy without all the escaping.
string projectFileContents =
"<VisualStudioProject>\r\n" + // <VisualStudioProject>
"\r\n" + //
" <VisualBasic\r\n" + // <VisualBasic
" ProjectType = \"Lo<cal\"\r\n" + // ProjectType = "Lo<cal"
" ProductVersion = \"7<.10.>3022\"\r\n" + // ProductVersion = "7<.10.>3022"
" A=\"blah>\" B=\"bloo<\"\r\n" + // A="blah>" B="bloo<"
" >\r\n" + // >
" </VisualBasic>\r\n" + // </VisualBasic>
"\r\n" + //
"</VisualStudioProject>\r\n"; // </VisualStudioProject>
// Create a temp file on disk with the above contents.
string projectFilename;
this.CreateTemporaryProjectFile(projectFileContents, out projectFilename);
// Instantiate our class with the project file.
OldVSProjectFileReader reader = new OldVSProjectFileReader(projectFilename);
// Create a buffer to hold 30 characters.
char[] characterBuffer = new char[30];
int charactersRead = 0;
// Read the first 30 characters into our buffer.
charactersRead = reader.Read(characterBuffer, 0, 30);
Assert.AreEqual(30, charactersRead);
Assert.AreEqual("<VisualStudioProject>\r\n\r\n <Vi", new string(characterBuffer));
// Read the next 30 characters into our buffer.
charactersRead = reader.Read(characterBuffer, 0, 30);
Assert.AreEqual(30, charactersRead);
Assert.AreEqual("sualBasic\r\n ProjectType = \"", new string(characterBuffer));
// Read the next 20 characters into our buffer starting at position 10.
// Confirm that the < and > characters within an attribute value got translated correctly.
charactersRead = reader.Read(characterBuffer, 10, 20);
Assert.AreEqual(20, charactersRead);
Assert.AreEqual("sualBasic\rLo<cal\"\r\n Prod", new string(characterBuffer));
// Read the next 20 characters into our buffer. Confirm that the < and > characters within
// an attribute value got translated correctly.
charactersRead = reader.Read(characterBuffer, 0, 20);
Assert.AreEqual(20, charactersRead);
Assert.AreEqual("uctVersion = \"7<.\r\n Prod", new string(characterBuffer));
// Read the remainder of the file. Confirm that the < and > characters within
// an attribute value got translated correctly.
string restOfFile = reader.ReadToEnd();
Assert.AreEqual("10.>3022\"\r\n A=\"blah>\" B=\"bloo<\"\r\n >\r\n </VisualBasic>\r\n\r\n</VisualStudioProject>\r\n",
restOfFile);
// Clean up.
reader.Close();
this.DeleteTemporaryProjectFile(projectFilename);
}
/// <summary>
/// This is the entry point method, which performs the project file format
/// conversion. This method will simply create a new XmlDocument
/// in memory, instead of trying to write it to disk.
/// </summary>
/// <owner>RGoel</owner>
private void ConvertInMemoryToMSBuildProject()
{
// Make sure we were passed in non-empty source and destination project
// file names.
error.VerifyThrowArgument((this.oldProjectFile != null) && (this.oldProjectFile.Length > 0),
"MissingOldProjectFile");
// Make sure the source project file exists.
error.VerifyThrowArgument(File.Exists(oldProjectFile), "ProjectFileNotFound",
oldProjectFile);
Initialize();
// Load the old project file as an XML document.
XmlDocumentWithLocation oldProjectDocument = new XmlDocumentWithLocation();
oldProjectDocument.PreserveWhitespace = true;
TextReader oldProjectFileReader = new OldVSProjectFileReader(oldProjectFile);
try
{
// We have our own custom XML reader to read in the old VS7/Everett project
// file. This is because the VS7/Everett project file format supported
// having characters like <, >, &, etc. embedded inside XML attribute
// values, but the default XmlTextReader won't handle this.
using (XmlTextReader xmlReader = new XmlTextReader(oldProjectFileReader))
{
xmlReader.DtdProcessing = DtdProcessing.Ignore;
oldProjectDocument.Load(xmlReader);
}
}
catch (Exception e)
{
throw new InvalidProjectFileException(e.Message);
}
finally
{
oldProjectFileReader.Close();
}
// Get the top-level nodes from the XML.
XmlNodeList rootNodes = oldProjectDocument.ChildNodes;
XmlElementWithLocation visualStudioProjectElement = null;
// The XML parser will guarantee that we only have one real root element,
// but since XML comments may appear outside of the <VisualStudioProject> scope,
// it's possible to get more than one child node. Just find the first
// non-comment node. That should be the <VisualStudioProject> element.
foreach(XmlNode childNode in rootNodes)
{
if ((childNode.NodeType != XmlNodeType.Comment) &&
(childNode.NodeType != XmlNodeType.XmlDeclaration) &&
(childNode.NodeType != XmlNodeType.Whitespace))
{
visualStudioProjectElement = (XmlElementWithLocation) childNode;
break;
}
}
IElementLocation oldProjectDocumentLocation = ElementLocation.Create(oldProjectDocument.FullPath, 1, 1);
// Verify that we found a non-comment root node.
ProjectErrorUtilities.VerifyThrowInvalidProject(visualStudioProjectElement != null,
oldProjectDocumentLocation,
"NoRootProjectElement", VSProjectElements.visualStudioProject);
// If the root element is <Project>, then assume that this project is
// already in XMake format.
if (visualStudioProjectElement.Name == XMakeProjectStrings.project)
{
this.xmakeProject = ProjectRootElement.Open(oldProjectFile);
// For Whidbey project just need to set the "ToolsVersion" attribute for the main project file
// and remove imports like <Import Project="$(MSBuildBinPath)\Microsoft.WinFX.targets" />
// because the Fidalgo stuff is part of .NET Framework 3.5
// For upgraded workflow projects, the workflow targets need to reference the new v3.5 targets instead of v3.0 targets
// this change is required to fix the msbuild break when building workflow rules.
// e.g. before upgrade :<Import Project="$(MSBuildExtensionsPath)\Microsoft\Windows Workflow Foundation\v3.0\Workflow.Targets" />
// after upgrade <Import Project="$(MSBuildExtensionsPath)\Microsoft\Windows Workflow Foundation\v3.5\Workflow.Targets" />
string oldToolsVersion = xmakeProject.ToolsVersion;
xmakeProject.ToolsVersion = XMakeProjectStrings.toolsVersion;
List<ProjectImportElement> listOfImportsToBeDeleted = new List<ProjectImportElement>();
List<ProjectImportElement> listOfWFImportsToBeDeleted = new List<ProjectImportElement>();
List<string> workflowImportsToAdd = new List<string>();
string workflowTargetsBasePath = @"$(MSBuildExtensionsPath)\Microsoft\Windows Workflow Foundation\";
string workflowOldWhidbeyTargetsPath = workflowTargetsBasePath + @"v3.0\";
string workflowOldOrcasTargetsPath = workflowTargetsBasePath + @"v3.5\";
string workflowNewTargetsPath = @"$(MSBuildToolsPath)\";
bool removedWFWhidbeyTargets = false;
bool changedProject = false;
// Find matching imports but don't delete whilst enumerating else it will throw an error
foreach (ProjectImportElement nextImport in xmakeProject.Imports)
{
if (String.Compare(nextImport.Project, @"$(MSBuildBinPath)\Microsoft.WinFX.targets", StringComparison.OrdinalIgnoreCase) == 0)
{
listOfImportsToBeDeleted.Add(nextImport);
}
if (nextImport.Project.Contains(workflowOldWhidbeyTargetsPath))
{
listOfWFImportsToBeDeleted.Add(nextImport);
workflowImportsToAdd.Add(nextImport.Project.Replace(workflowOldWhidbeyTargetsPath, workflowNewTargetsPath));
removedWFWhidbeyTargets = true;
}
if (nextImport.Project.Contains(workflowOldOrcasTargetsPath))
{
listOfWFImportsToBeDeleted.Add(nextImport);
workflowImportsToAdd.Add(nextImport.Project.Replace(workflowOldOrcasTargetsPath, workflowNewTargetsPath));
}
}
// Now delete any matching imports
foreach (ProjectImportElement importToDelete in listOfWFImportsToBeDeleted)
{
this.xmakeProject.RemoveChild(importToDelete);
changedProject = true;
}
bool removedWinFXTargets = false;
foreach (ProjectImportElement importToDelete in listOfImportsToBeDeleted)
{
this.xmakeProject.RemoveChild(importToDelete);
removedWinFXTargets = true;
changedProject = true;
}
// If we removed WinFX targets this is a sparkle project and should use v3.0
if (removedWinFXTargets)
{
xmakeProject.AddProperty(XMakeProjectStrings.TargetFrameworkVersion, "v3.0");
changedProject = true;
}
//If we removed WFWhidbey imports, we should target this project to v3.0
if (removedWFWhidbeyTargets)
{
xmakeProject.AddProperty(XMakeProjectStrings.TargetFrameworkVersion, "v3.0");
changedProject = true;
}
// Re-add the workflow imports with the v4.0 targets.
foreach (string workflowImportToAdd in workflowImportsToAdd)
{
this.xmakeProject.AddImport(workflowImportToAdd);
changedProject = true;
}
// Find all the XAML files in the project and give them the custom attributes
// <Generator>MSBuild:Compile</Generator> (DevDiv Bugs bug 81222)
// <SubType>Designer</SubType> (DevDiv Bugs bug 82748)
// Find all references to old VC project files (.vcproj extension) and change the
// extension to .vcxproj instead. NOTE: we assume that the actual .vcproj -> .vcxproj
// conversion has already been / is being / will be done elsewhere.
// Dev10 Bug 557388
foreach (ProjectItemElement nextItem in xmakeProject.Items)
{
if ((!nextItem.ItemType.Equals("Reference", StringComparison.OrdinalIgnoreCase)) &&
(nextItem.Include.Trim().EndsWith(".xaml", StringComparison.OrdinalIgnoreCase)))
{
if (!nextItem.Metadata.Any(m => String.Equals(m.Name, "Generator", StringComparison.OrdinalIgnoreCase)))
{
nextItem.AddMetadata("Generator", "MSBuild:Compile");
changedProject = true;
}
if (!nextItem.Metadata.Any(m => String.Equals(m.Name, "SubType", StringComparison.OrdinalIgnoreCase)))
{
nextItem.AddMetadata("SubType", "Designer");
changedProject = true;
}
}
if (String.Equals(nextItem.ItemType, "ProjectReference", StringComparison.OrdinalIgnoreCase) &&
nextItem.Include.Trim().EndsWith(".vcproj", StringComparison.OrdinalIgnoreCase))
{
nextItem.Include = Path.ChangeExtension(nextItem.Include, ".vcxproj");
changedProject = true;
}
}
// DevDiv Bugs bug 100701: if we removed the Microsoft.WinFX.targets import,
// and if there is no ProjectTypeGuids property, add the WPF flavor GUID
if (removedWinFXTargets)
{
ProjectPropertyElement currentGuidsProperty = FindPropertyIfPresent(this.xmakeProject, XMakeProjectStrings.projectTypeGuids);
string newGuids = "{" + XMakeProjectStrings.wpfFlavorGuid + "}";
if (currentGuidsProperty == null || currentGuidsProperty.Value.Length == 0)
{
string currentGuids = String.Empty;
// To have a flavor GUID we need a base GUID.
if (oldProjectFile.EndsWith(".csproj", StringComparison.OrdinalIgnoreCase))
{
currentGuids = "{" + XMakeProjectStrings.cSharpGuid + "}";
}
if (oldProjectFile.EndsWith(".vbproj", StringComparison.OrdinalIgnoreCase))
{
currentGuids = "{" + XMakeProjectStrings.visualBasicGuid + "}";
}
xmakeProject.AddProperty(XMakeProjectStrings.projectTypeGuids, newGuids + ";" + currentGuids);
changedProject = true;
}
}
// Fix up TargetFrameworkSubset
changedProject = FixTargetFrameworkSubset() || changedProject;
var hasFSharpSpecificConversions = FSharpSpecificConversions(true);
changedProject = hasFSharpSpecificConversions || changedProject;
changedProject = VBSpecificConversions() || changedProject;
// Do asset compat repair for any project that was previously a TV < 12.0
if (
String.IsNullOrEmpty(oldToolsVersion) ||
String.Equals(oldToolsVersion, "3.5", StringComparison.OrdinalIgnoreCase) ||
String.Equals(oldToolsVersion, "4.0", StringComparison.OrdinalIgnoreCase)
)
{
changedProject = DoRepairForAssetCompat() || changedProject;
}
// Remove any default fully qualified Code Analysis paths.
// DevDiv bug 63415
changedProject = FixCodeAnalysisPaths() || changedProject;
if (hasFSharpSpecificConversions && !String.IsNullOrEmpty(oldToolsVersion))
{
// for Bug 609702:A ToolsVersion=12.0 F# project fails to load in VS 2012
// for F# project after upgrade we restore previous value of ToolsVersion so Dev11 still can load upgraded project
// however if old ToolsVersion as 3.5 - it will be upgraded to 4.0 to avoid any unexpected behavior in Dev10\Dev11
xmakeProject.ToolsVersion = String.Equals(oldToolsVersion, "3.5", StringComparison.OrdinalIgnoreCase) ? "4.0" : oldToolsVersion;
}
else if (this.isMinorUpgrade ||
(!changedProject &&
!String.IsNullOrEmpty(oldToolsVersion) &&
!String.Equals(oldToolsVersion, "3.5", StringComparison.OrdinalIgnoreCase))
)
{
// If it's minor upgrade, or nothing changed and the project was already TV 4.0 or higher,
// set the ToolsVersion back to its old value.
xmakeProject.ToolsVersion = oldToolsVersion;
}
}
else
{
// OK, we have to start with a fresh project and assemble it
this.xmakeProject = ProjectRootElement.Create();
// This root node must be a <VisualStudioProject> node.
ProjectErrorUtilities.VerifyThrowInvalidProject(visualStudioProjectElement.Name ==
VSProjectElements.visualStudioProject,
visualStudioProjectElement.Location, "UnrecognizedElement", visualStudioProjectElement.Name);
// Set the "DefaultTargets" attribute for the main project file.
if (!isUserFile)
{
xmakeProject.DefaultTargets = XMakeProjectStrings.defaultTargets;
}
// Set the "ToolsVersion" attribute for the main project file.
if (!isUserFile)
{
xmakeProject.ToolsVersion = XMakeProjectStrings.toolsVersion;
}
// Process the <VisualStudioProject> element in the source project file,
// adding the necessary stuff to the XMake project.
this.ProcessVisualStudioProjectElement(visualStudioProjectElement);
}
}