/// <summary>
/// Initializes a new instance of the LastPatchInstallationSummary
/// class.
/// </summary>
/// <param name="status">The overall success or failure status of the
/// operation. It remains "InProgress" until the operation completes.
/// At that point it will become "Failed", "Succeeded", or
/// "CompletedWithWarnings.". Possible values include: 'InProgress',
/// 'Failed', 'Succeeded', 'CompletedWithWarnings'</param>
/// <param name="installationActivityId">The activity ID of the
/// operation that produced this result. It is used to correlate across
/// CRP and extension logs.</param>
/// <param name="maintenanceWindowExceeded">Describes whether the
/// operation ran out of time before it completed all its intended
/// actions</param>
/// <param name="rebootStatus">The reboot status of the machine after
/// the patch operation. It will be in "NotNeeded" status if reboot is
/// not needed after the patch operation. "Required" will be the status
/// once the patch is applied and machine is required to reboot.
/// "Started" will be the reboot status when the machine has started to
/// reboot. "Failed" will be the status if the machine is failed to
/// reboot. "Completed" will be the status once the machine is rebooted
/// successfully. Possible values include: 'NotNeeded', 'Required',
/// 'Started', 'Failed', 'Completed'</param>
/// <param name="notSelectedPatchCount">The number of all available
/// patches but not going to be installed because it didn't match a
/// classification or inclusion list entry.</param>
/// <param name="excludedPatchCount">The number of all available
/// patches but excluded explicitly by a customer-specified exclusion
/// list match.</param>
/// <param name="pendingPatchCount">The number of all available patches
/// expected to be installed over the course of the patch installation
/// operation.</param>
/// <param name="installedPatchCount">The count of patches that
/// successfully installed.</param>
/// <param name="failedPatchCount">The count of patches that failed
/// installation.</param>
/// <param name="startTime">The UTC timestamp when the operation
/// began.</param>
/// <param name="lastModifiedTime">The UTC timestamp when the operation
/// began.</param>
/// <param name="startedBy">The person or system account that started
/// the operation</param>
/// <param name="error">The errors that were encountered during
/// execution of the operation. The details array contains the list of
/// them.</param>
public LastPatchInstallationSummary(PatchOperationStatus status = default(PatchOperationStatus), string installationActivityId = default(string), bool?maintenanceWindowExceeded = default(bool?), RebootStatus rebootStatus = default(RebootStatus), int?notSelectedPatchCount = default(int?), int?excludedPatchCount = default(int?), int?pendingPatchCount = default(int?), int?installedPatchCount = default(int?), int?failedPatchCount = default(int?), System.DateTime?startTime = default(System.DateTime?), System.DateTime?lastModifiedTime = default(System.DateTime?), string startedBy = default(string), ApiError error = default(ApiError))
{
Status = status;
InstallationActivityId = installationActivityId;
MaintenanceWindowExceeded = maintenanceWindowExceeded;
RebootStatus = rebootStatus;
NotSelectedPatchCount = notSelectedPatchCount;
ExcludedPatchCount = excludedPatchCount;
PendingPatchCount = pendingPatchCount;
InstalledPatchCount = installedPatchCount;
FailedPatchCount = failedPatchCount;
StartTime = startTime;
LastModifiedTime = lastModifiedTime;
StartedBy = startedBy;
Error = error;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the
/// VirtualMachineAssessPatchesResultInner class.
/// </summary>
/// <param name="status">The overall success or failure status of the
/// operation. It remains "InProgress" until the operation completes.
/// At that point it will become "Failed", "Succeeded", or
/// "CompletedWithWarnings.". Possible values include: 'InProgress',
/// 'Failed', 'Succeeded', 'CompletedWithWarnings'</param>
/// <param name="assessmentActivityId">The activity ID of the operation
/// that produced this result. It is used to correlate across CRP and
/// extension logs.</param>
/// <param name="rebootPending">The overall reboot status of the VM. It
/// will be true when partially installed patches require a reboot to
/// complete installation but the reboot has not yet occurred.</param>
/// <param name="criticalAndSecurityPatchCount">The number of critical
/// or security patches that have been detected as available and not
/// yet installed.</param>
/// <param name="otherPatchCount">The number of all available patches
/// excluding critical and security.</param>
/// <param name="startDateTime">The UTC timestamp when the operation
/// began.</param>
/// <param name="patches">The list of patches that have been detected
/// as available for installation.</param>
/// <param name="error">The errors that were encountered during
/// execution of the operation. The details array contains the list of
/// them.</param>
public VirtualMachineAssessPatchesResultInner(PatchOperationStatus status = default(PatchOperationStatus), string assessmentActivityId = default(string), bool?rebootPending = default(bool?), int?criticalAndSecurityPatchCount = default(int?), int?otherPatchCount = default(int?), System.DateTime?startDateTime = default(System.DateTime?), IList <VirtualMachineSoftwarePatchProperties> patches = default(IList <VirtualMachineSoftwarePatchProperties>), ApiError error = default(ApiError))
{
Status = status;
AssessmentActivityId = assessmentActivityId;
RebootPending = rebootPending;
CriticalAndSecurityPatchCount = criticalAndSecurityPatchCount;
OtherPatchCount = otherPatchCount;
StartDateTime = startDateTime;
Patches = patches;
Error = error;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the RollbackStatusInfo class.
/// </summary>
/// <param name="successfullyRolledbackInstanceCount">The number of
/// instances which have been successfully rolled back.</param>
/// <param name="failedRolledbackInstanceCount">The number of instances
/// which failed to rollback.</param>
/// <param name="rollbackError">Error details if OS rollback
/// failed.</param>
public RollbackStatusInfo(int?successfullyRolledbackInstanceCount = default(int?), int?failedRolledbackInstanceCount = default(int?), ApiError rollbackError = default(ApiError))
{
SuccessfullyRolledbackInstanceCount = successfullyRolledbackInstanceCount;
FailedRolledbackInstanceCount = failedRolledbackInstanceCount;
RollbackError = rollbackError;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the OperationStatusResponseInner
/// class.
/// </summary>
/// <param name="name">Operation ID</param>
/// <param name="status">Operation status</param>
/// <param name="startTime">Start time of the operation</param>
/// <param name="endTime">End time of the operation</param>
/// <param name="error">Api error</param>
public OperationStatusResponseInner(string name = default(string), string status = default(string), System.DateTime?startTime = default(System.DateTime?), System.DateTime?endTime = default(System.DateTime?), ApiError error = default(ApiError))
{
Name = name;
Status = status;
StartTime = startTime;
EndTime = endTime;
Error = error;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the LogAnalyticsOperationResultInner
/// class.
/// </summary>
/// <param name="name">Operation ID</param>
/// <param name="status">Operation status</param>
/// <param name="startTime">Start time of the operation</param>
/// <param name="endTime">End time of the operation</param>
/// <param name="error">Api error</param>
/// <param name="properties">LogAnalyticsOutput</param>
public LogAnalyticsOperationResultInner(string name = default(string), string status = default(string), System.DateTime?startTime = default(System.DateTime?), System.DateTime?endTime = default(System.DateTime?), ApiError error = default(ApiError), LogAnalyticsOutput properties = default(LogAnalyticsOutput))
: base(name, status, startTime, endTime, error)
{
Properties = properties;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the RollingUpgradeStatusInfoInner
/// class.
/// </summary>
/// <param name="policy">The rolling upgrade policies applied for this
/// upgrade.</param>
/// <param name="runningStatus">Information about the current running
/// state of the overall upgrade.</param>
/// <param name="progress">Information about the number of virtual
/// machine instances in each upgrade state.</param>
/// <param name="error">Error details for this upgrade, if there are
/// any.</param>
public RollingUpgradeStatusInfoInner(string location, string id = default(string), string name = default(string), string type = default(string), IDictionary <string, string> tags = default(IDictionary <string, string>), RollingUpgradePolicy policy = default(RollingUpgradePolicy), RollingUpgradeRunningStatus runningStatus = default(RollingUpgradeRunningStatus), RollingUpgradeProgressInfo progress = default(RollingUpgradeProgressInfo), ApiError error = default(ApiError))
: base(location, id, name, type, tags)
{
Policy = policy;
RunningStatus = runningStatus;
Progress = progress;
Error = error;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the
/// UpgradeOperationHistoricalStatusInfoProperties class.
/// </summary>
/// <param name="runningStatus">Information about the overall status of
/// the upgrade operation.</param>
/// <param name="progress">Counts of the VM's in each state.</param>
/// <param name="error">Error Details for this upgrade if there are
/// any.</param>
/// <param name="startedBy">Invoker of the Upgrade Operation. Possible
/// values include: 'Unknown', 'User', 'Platform'</param>
/// <param name="targetImageReference">Image Reference details</param>
/// <param name="rollbackInfo">Information about OS rollback if
/// performed</param>
public UpgradeOperationHistoricalStatusInfoProperties(UpgradeOperationHistoryStatus runningStatus = default(UpgradeOperationHistoryStatus), RollingUpgradeProgressInfo progress = default(RollingUpgradeProgressInfo), ApiError error = default(ApiError), UpgradeOperationInvoker?startedBy = default(UpgradeOperationInvoker?), ImageReferenceInner targetImageReference = default(ImageReferenceInner), RollbackStatusInfo rollbackInfo = default(RollbackStatusInfo))
{
RunningStatus = runningStatus;
Progress = progress;
Error = error;
StartedBy = startedBy;
TargetImageReference = targetImageReference;
RollbackInfo = rollbackInfo;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the RunCommandResultInner class.
/// </summary>
/// <param name="name">Operation ID</param>
/// <param name="status">Operation status</param>
/// <param name="startTime">Start time of the operation</param>
/// <param name="endTime">End time of the operation</param>
/// <param name="error">Api error</param>
/// <param name="output">Operation output data (raw JSON)</param>
public RunCommandResultInner(string name = default(string), string status = default(string), System.DateTime?startTime = default(System.DateTime?), System.DateTime?endTime = default(System.DateTime?), ApiError error = default(ApiError), object output = default(object))
: base(name, status, startTime, endTime, error)
{
Output = output;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the AvailablePatchSummary class.
/// </summary>
/// <param name="status">The overall success or failure status of the
/// operation. It remains "InProgress" until the operation completes.
/// At that point it will become "Failed", "Succeeded", or
/// "CompletedWithWarnings.". Possible values include: 'InProgress',
/// 'Failed', 'Succeeded', 'CompletedWithWarnings'</param>
/// <param name="assessmentActivityId">The activity ID of the operation
/// that produced this result. It is used to correlate across CRP and
/// extension logs.</param>
/// <param name="rebootPending">The overall reboot status of the VM. It
/// will be true when partially installed patches require a reboot to
/// complete installation but the reboot has not yet occurred.</param>
/// <param name="criticalAndSecurityPatchCount">The number of critical
/// or security patches that have been detected as available and not
/// yet installed.</param>
/// <param name="otherPatchCount">The number of all available patches
/// excluding critical and security.</param>
/// <param name="startTime">The UTC timestamp when the operation
/// began.</param>
/// <param name="lastModifiedTime">The UTC timestamp when the operation
/// began.</param>
/// <param name="error">The errors that were encountered during
/// execution of the operation. The details array contains the list of
/// them.</param>
public AvailablePatchSummary(PatchOperationStatus status = default(PatchOperationStatus), string assessmentActivityId = default(string), bool?rebootPending = default(bool?), int?criticalAndSecurityPatchCount = default(int?), int?otherPatchCount = default(int?), System.DateTime?startTime = default(System.DateTime?), System.DateTime?lastModifiedTime = default(System.DateTime?), ApiError error = default(ApiError))
{
Status = status;
AssessmentActivityId = assessmentActivityId;
RebootPending = rebootPending;
CriticalAndSecurityPatchCount = criticalAndSecurityPatchCount;
OtherPatchCount = otherPatchCount;
StartTime = startTime;
LastModifiedTime = lastModifiedTime;
Error = error;
CustomInit();
}