Beispiel #1
0
        static void MainSub()
        {
            //AppDomain.CurrentDomain.AssemblyResolve += AssemblyResolverHelper.AssemblyResolveHandler;

            //var projectFilePath = NDEPEND_PROJECT_FILE_PATH.ToAbsoluteFilePath();
            //Console.WriteLine("*** Load NDepend Project from {" + projectFilePath.ToString() + @"}***");

            // 0) Creates a NDependServicesProvider object
            var ndependServicesProvider = new NDependServicesProvider();


            // 1) obtain some VS solution or project file path
            var visualStudioManager = ndependServicesProvider.VisualStudioManager;
            ICollection <IAbsoluteFilePath> vsSlnOrProjFilePaths;
            IntPtr ownerWindowHandle = Process.GetCurrentProcess().MainWindowHandle; // get a non IntPtr.Zero owner Window Handle. If you are in a System.Console try this

            visualStudioManager.ShowDialogSelectVisualStudioSolutionsOrProjects(ownerWindowHandle, out vsSlnOrProjFilePaths);
            // Could also use:  visualStudioManager.GetMostRecentlyUsedVisualStudioSolutionOrProject() can also be used


            // 2) obtains assemblies file path to analyze
            var assembliesFilePath = (from vsSlnOrProjFilePath in vsSlnOrProjFilePaths
                                      from assembliesFilePathTmp in visualStudioManager.GetAssembliesFromVisualStudioSolutionOrProject(vsSlnOrProjFilePath)
                                      select assembliesFilePathTmp).Distinct().ToArray();

            // 3) gets or create a IProject object
            var projectManager = ndependServicesProvider.ProjectManager;
            //var path = NDepend.Path.PathHelpers.ToAbsoluteFilePath(@"C:\projetos\estudoipt\dapperdotnet\dapper-dot-net\");
            //IProject project = projectManager.CreateBlankProject(assembliesFilePath.FirstOrDefault(), "metricsproject");
            IProject project = projectManager.CreateTemporaryProject(assembliesFilePath, TemporaryProjectMode.Temporary);
            // Or, to get a IProject object, could also use
            //   projectManager.CreateBlankProject()  to create a persisten project
            //   and then project.CodeToAnalyze.SetApplicationAssemblies()
            //   and then projectManager.SaveProject(project); o save the project file
            //
            // Or, to get an existing IProject object, could also use
            //    projectManager.ShowDialogChooseAnExistingProject(out project)
            // Or programmatically list most recently used NDepend projects on this machine through
            //    projectManager.GetMostRecentlyUsedProjects()


            // 4) gets an IAnalysisResult object from the IProject object
            IAnalysisResult analysisResult = project.RunAnalysis();  // *** This particular method works only with a Build Machine license ***
                                                                     //  Or  project.RunAnalysisAndBuildReport()  // *** This particular method works only with a Build Machine license ***

            // Or, to get a IAnalysisResult object, first gets a IAnalysisResultRef object, that represents a reference to a persisted IAnalysisResult object
            //    project.TryGetMostRecentAnalysisResultRef() or project.GetAvailableAnalysisResultsRefs() or project.GetAvailableAnalysisResultsRefsGroupedPerMonth()
            // and then analysisResultRef.Load()


            // 5) gets a ICodeBase object from the IAnalysisResult object
            ICodeBase codeBase = analysisResult.CodeBase;

            // Or eventually a ICompareContext object if you wish to analyze diff
            // codeBase.CreateCompareContextWithOlder(olderCodeBase)


            Calculator.ICalculate calc = new Calculator.NumberOfChildren();
            var result = calc.Calculate(codeBase);

            IMetricPrinter m = new ExcelPrinter();

            m.Print("NumberOfChildren", result);

            calc   = new Calculator.CouplingBetweenObjectClasses();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("CouplingBetweenObject", result);

            calc   = new Calculator.DepthOfInheritanceTree();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("DepthOfInheritanceTree", result);

            calc   = new Calculator.LackOfCohesionInMethods();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("LackOfCohesionInMethods", result);

            calc   = new Calculator.ResponseForAClass();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("ResponseForAClass", result);

            calc   = new Calculator.WeightedMethodsPerClass();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("WeightedMethodsPerClass", result);
            // 6) use the code model API to query code and do develop any algorithm you need!
            // For example here we are looking for complex methods

            /*var complexMethods = (from m in codeBase.Application.Methods
             *                    where m.ILCyclomaticComplexity > 1
             *                    orderby m.ILCyclomaticComplexity descending
             *                    select m).ToArray();
             * if (complexMethods.Length == 0) { return; }
             * Console.WriteLine("Press a key to show the " + complexMethods.Length + " most complex methods");
             * Console.ReadKey();
             * foreach (var m in complexMethods)
             * {
             *  Console.WriteLine(m.FullName + " has a IL cyclomatic complexity of " + m.ILCyclomaticComplexity);
             * }
             *
             *
             * // 7) eventually lets the user opens source file declaration
             * if (complexMethods.First().SourceFileDeclAvailable)
             * {
             *  var mostComplexMethod = complexMethods.First();
             *  Console.WriteLine("Press a key to open the source code decl of the most complex method?");
             *  Console.ReadKey();
             *  mostComplexMethod.TryOpenSource();
             *  // Eventually use ExtensionMethodsTooling.TryCompareSourceWith(NDepend.CodeModel.ISourceFileLine,NDepend.CodeModel.ISourceFileLine)
             *  // to compare 2 different versions of a code element
             * }*/
        }
Beispiel #2
0
        static void MainSub()
        {
            //AppDomain.CurrentDomain.AssemblyResolve += AssemblyResolverHelper.AssemblyResolveHandler;

            //var projectFilePath = NDEPEND_PROJECT_FILE_PATH.ToAbsoluteFilePath();
            //Console.WriteLine("*** Load NDepend Project from {" + projectFilePath.ToString() + @"}***");

            // 0) Creates a NDependServicesProvider object
            var ndependServicesProvider = new NDependServicesProvider();

            // 1) obtain some VS solution or project file path
            var visualStudioManager = ndependServicesProvider.VisualStudioManager;
            ICollection<IAbsoluteFilePath> vsSlnOrProjFilePaths;
            IntPtr ownerWindowHandle = Process.GetCurrentProcess().MainWindowHandle; // get a non IntPtr.Zero owner Window Handle. If you are in a System.Console try this
            visualStudioManager.ShowDialogSelectVisualStudioSolutionsOrProjects(ownerWindowHandle, out vsSlnOrProjFilePaths);
            // Could also use:  visualStudioManager.GetMostRecentlyUsedVisualStudioSolutionOrProject() can also be used

            // 2) obtains assemblies file path to analyze
            var assembliesFilePath = (from vsSlnOrProjFilePath in vsSlnOrProjFilePaths
                                      from assembliesFilePathTmp in visualStudioManager.GetAssembliesFromVisualStudioSolutionOrProject(vsSlnOrProjFilePath)
                                      select assembliesFilePathTmp).Distinct().ToArray();

            // 3) gets or create a IProject object
            var projectManager = ndependServicesProvider.ProjectManager;
            //var path = NDepend.Path.PathHelpers.ToAbsoluteFilePath(@"C:\projetos\estudoipt\dapperdotnet\dapper-dot-net\");
            //IProject project = projectManager.CreateBlankProject(assembliesFilePath.FirstOrDefault(), "metricsproject");
            IProject project = projectManager.CreateTemporaryProject(assembliesFilePath, TemporaryProjectMode.Temporary);
            // Or, to get a IProject object, could also use
            //   projectManager.CreateBlankProject()  to create a persisten project
            //   and then project.CodeToAnalyze.SetApplicationAssemblies()
            //   and then projectManager.SaveProject(project); o save the project file
            //
            // Or, to get an existing IProject object, could also use
            //    projectManager.ShowDialogChooseAnExistingProject(out project)
            // Or programmatically list most recently used NDepend projects on this machine through
            //    projectManager.GetMostRecentlyUsedProjects()

            // 4) gets an IAnalysisResult object from the IProject object
            IAnalysisResult analysisResult = project.RunAnalysis();  // *** This particular method works only with a Build Machine license ***
                                                                     //  Or  project.RunAnalysisAndBuildReport()  // *** This particular method works only with a Build Machine license ***

            // Or, to get a IAnalysisResult object, first gets a IAnalysisResultRef object, that represents a reference to a persisted IAnalysisResult object
            //    project.TryGetMostRecentAnalysisResultRef() or project.GetAvailableAnalysisResultsRefs() or project.GetAvailableAnalysisResultsRefsGroupedPerMonth()
            // and then analysisResultRef.Load()

            // 5) gets a ICodeBase object from the IAnalysisResult object
            ICodeBase codeBase = analysisResult.CodeBase;
            // Or eventually a ICompareContext object if you wish to analyze diff
            // codeBase.CreateCompareContextWithOlder(olderCodeBase)

            Calculator.ICalculate calc = new Calculator.NumberOfChildren();
            var result = calc.Calculate(codeBase);

            IMetricPrinter m = new ExcelPrinter();
            m.Print("NumberOfChildren",result);

            calc = new Calculator.CouplingBetweenObjectClasses();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("CouplingBetweenObject", result);

            calc = new Calculator.DepthOfInheritanceTree();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("DepthOfInheritanceTree", result);

            calc = new Calculator.LackOfCohesionInMethods();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("LackOfCohesionInMethods", result);

            calc = new Calculator.ResponseForAClass();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("ResponseForAClass", result);

            calc = new Calculator.WeightedMethodsPerClass();
            result = calc.Calculate(codeBase);

            m = new ExcelPrinter();
            m.Print("WeightedMethodsPerClass", result);
            // 6) use the code model API to query code and do develop any algorithm you need!
            // For example here we are looking for complex methods
            /*var complexMethods = (from m in codeBase.Application.Methods
                                  where m.ILCyclomaticComplexity > 1
                                  orderby m.ILCyclomaticComplexity descending
                                  select m).ToArray();
            if (complexMethods.Length == 0) { return; }
            Console.WriteLine("Press a key to show the " + complexMethods.Length + " most complex methods");
            Console.ReadKey();
            foreach (var m in complexMethods)
            {
                Console.WriteLine(m.FullName + " has a IL cyclomatic complexity of " + m.ILCyclomaticComplexity);
            }

            // 7) eventually lets the user opens source file declaration
            if (complexMethods.First().SourceFileDeclAvailable)
            {
                var mostComplexMethod = complexMethods.First();
                Console.WriteLine("Press a key to open the source code decl of the most complex method?");
                Console.ReadKey();
                mostComplexMethod.TryOpenSource();
                // Eventually use ExtensionMethodsTooling.TryCompareSourceWith(NDepend.CodeModel.ISourceFileLine,NDepend.CodeModel.ISourceFileLine)
                // to compare 2 different versions of a code element
            }*/
        }