public static IDisposable LaunchAndConnectToPrinterEmulator(this AutomationRunner testRunner, string make = "Airwolf 3D", string model = "HD", bool runSlow = false)
{
// Load the TestEnv config
var config = TestAutomationConfig.Load();
// Create the printer
MatterControlUtilities.AddAndSelectPrinter(testRunner, make, model);
Emulator emulator = new Emulator();
emulator.PortName = config.Printer;
emulator.RunSlow = runSlow;
emulator.Startup();
// edit the com port
SystemWindow containingWindow;
var editButton = testRunner.GetWidgetByName("Edit Printer Button", out containingWindow);
testRunner.Delay(() => editButton.Enabled, 5); // Wait until the edit button is ready to click it. Ensures the printer is loaded.
testRunner.ClickByName("Edit Printer Button", 3);
testRunner.ClickByName("Serial Port Dropdown", 3);
testRunner.ClickByName(config.MCPort + " Menu Item", 5);
testRunner.ClickByName("Cancel Wizard Button");
// connect to the created printer
testRunner.ClickByName("Connect to printer button", 2);
testRunner.WaitForName("Disconnect from printer button", 5);
return(emulator);
}
public static async Task RunTest(
AutomationTest testMethod,
string staticDataPathOverride = null,
double maxTimeToRun = 60,
QueueTemplate queueItemFolderToAdd = QueueTemplate.None,
int overrideWidth = -1,
int overrideHeight = -1,
string defaultTestImages = null)
{
// Walk back a step in the stack and output the callers name
StackTrace st = new StackTrace(false);
Debug.WriteLine("\r\n ***** Running automation test: {0} {1} ", st.GetFrames().Skip(1).First().GetMethod().Name, DateTime.Now);
if (staticDataPathOverride == null)
{
// Popping one directory above MatterControl, then back down into MatterControl ensures this works in MCCentral as well and MatterControl
staticDataPathOverride = TestContext.CurrentContext.ResolveProjectPath(5, "MatterControl", "StaticData");
}
#if DEBUG
string outputDirectory = "Debug";
#else
string outputDirectory = "Release";
#endif
Environment.CurrentDirectory = TestContext.CurrentContext.ResolveProjectPath(5, "MatterControl", "bin", outputDirectory);
#if !__ANDROID__
// Set the static data to point to the directory of MatterControl
StaticData.Instance = new FileSystemStaticData(staticDataPathOverride);
#endif
// Popping one directory above MatterControl, then back down into MatterControl ensures this works in MCCentral as well and MatterControl
MatterControlUtilities.OverrideAppDataLocation(TestContext.CurrentContext.ResolveProjectPath(5, "MatterControl"));
if (queueItemFolderToAdd != QueueTemplate.None)
{
string queueTemplateDirectory = queueItemFolderToAdd.ToString();
MatterControlUtilities.AddItemsToQueue(queueTemplateDirectory);
}
if (defaultTestImages == null)
{
defaultTestImages = TestContext.CurrentContext.ResolveProjectPath(4, "Tests", "TestData", "TestImages");
}
UserSettings.Instance.set(UserSettingsKey.ThumbnailRenderingMode, "orthographic");
//GL.HardwareAvailable = false;
MatterControlApplication matterControlWindow = MatterControlApplication.CreateInstance(overrideWidth, overrideHeight);
var config = TestAutomationConfig.Load();
// Extract mouse speed from config
AutomationRunner.TimeToMoveMouse = config.TimeToMoveMouse;
await AutomationRunner.ShowWindowAndExecuteTests(matterControlWindow, testMethod, maxTimeToRun, defaultTestImages, config.AutomationInputType);
}
public static Emulator LaunchAndConnectToPrinterEmulator(this AutomationRunner testRunner, string make = "Airwolf 3D", string model = "HD", bool runSlow = false)
{
SystemWindow systemWindow;
testRunner.GetWidgetByName("Hardware Tab", out systemWindow, 10);
// make sure we wait for MC to be up and running
testRunner.WaitforDraw(systemWindow);
// Load the TestEnv config
var config = TestAutomationConfig.Load();
// Override the heat up time
Emulator.DefaultHeatUpTime = config.HeatupTime;
// Override the temp stabilization time
WaitForTempStream.WaitAfterReachTempTime = config.TempStabilizationTime;
// Create the printer
testRunner.AddAndSelectPrinter(make, model);
// Force the configured printer to use the emulator driver
ApplicationController.Instance.ActivePrinter.Settings.SetValue("driver_type", "Emulator");
// edit the com port
testRunner.SwitchToPrinterSettings();
var serialPortDropDown = testRunner.GetWidgetByName("com_port Field", out _, 1);
testRunner.WaitFor(() => serialPortDropDown.Enabled); // Wait until the serialPortDropDown is ready to click it. Ensures the printer is loaded.
testRunner.ClickByName("com_port Field");
testRunner.ClickByName("Emulator Menu Item");
// connect to the created printer
testRunner.ClickByName("Connect to printer button");
testRunner.WaitForName("Disconnect from printer button");
// Access through static instance must occur after Connect has occurred and the port has spun up
Emulator.Instance.RunSlow = runSlow;
return(Emulator.Instance);
}
public static Process LaunchAndConnectToPrinterEmulator(AutomationRunner testRunner, bool runSlow = false, string make = "Airwolf 3D", string model = "HD")
{
// Load the TestEnv config
var config = TestAutomationConfig.Load();
// Create the printer
MatterControlUtilities.AddAndSelectPrinter(testRunner, make, model);
var process = new Process();
process.StartInfo = new ProcessStartInfo()
{
FileName = "python",
Arguments = string.Format("{0} {1}{2}",
StaticData.Instance.MapPath("../PrinterEmulator.py"),
config.Printer,
runSlow ? " slow" : ""),
WindowStyle = ProcessWindowStyle.Minimized
};
process.Start();
// edit the com port
testRunner.ClickByName("Edit Printer Button");
testRunner.Wait(2);
testRunner.ClickByName("Com Port Dropdown");
testRunner.ClickByName(config.MCPort + " Menu Item", 1);
testRunner.ClickByName("Cancel Wizard Button");
// connect to the created printer
testRunner.ClickByName("Connect to printer button", 2);
testRunner.Wait(2);
return(process);
}
public static async Task RunTest(
AutomationTest testMethod,
string staticDataPathOverride = null,
double maxTimeToRun = 60,
QueueTemplate queueItemFolderToAdd = QueueTemplate.None,
int overrideWidth = -1,
int overrideHeight = -1,
string defaultTestImages = null)
{
// Walk back a step in the stack and output the callers name
//StackTrace st = new StackTrace(false);
//Debug.WriteLine("\r\n ***** Running automation test: {0} {1} ", st.GetFrames().Skip(1).First().GetMethod().Name, DateTime.Now);
if (staticDataPathOverride == null)
{
// Popping one directory above MatterControl, then back down into MatterControl ensures this works in MCCentral as well and MatterControl
staticDataPathOverride = TestContext.CurrentContext.ResolveProjectPath(5, "MatterControl", "StaticData");
}
#if DEBUG
string outputDirectory = "Debug";
#else
string outputDirectory = "Release";
#endif
Environment.CurrentDirectory = TestContext.CurrentContext.ResolveProjectPath(5, "MatterControl", "bin", outputDirectory);
// Override the default SystemWindow type without config.json
AggContext.Config.ProviderTypes.SystemWindowProvider = "MatterHackers.Agg.UI.OpenGLWinformsWindowProvider, agg_platform_win32";
#if !__ANDROID__
// Set the static data to point to the directory of MatterControl
AggContext.StaticData = new FileSystemStaticData(staticDataPathOverride);
#endif
// Popping one directory above MatterControl, then back down into MatterControl ensures this works in MCCentral as well and MatterControl
MatterControlUtilities.OverrideAppDataLocation(TestContext.CurrentContext.ResolveProjectPath(5, "MatterControl"));
if (queueItemFolderToAdd != QueueTemplate.None)
{
MatterControlUtilities.AddItemsToQueue(queueItemFolderToAdd.ToString());
}
if (defaultTestImages == null)
{
defaultTestImages = TestContext.CurrentContext.ResolveProjectPath(4, "Tests", "TestData", "TestImages");
}
UserSettings.Instance.set(UserSettingsKey.ThumbnailRenderingMode, "orthographic");
//GL.HardwareAvailable = false;
var config = TestAutomationConfig.Load();
if (config.UseAutomationDialogs)
{
AggContext.Config.ProviderTypes.DialogProvider = "MatterHackers.Agg.Platform.AutomationDialogProvider, GuiAutomation";
}
// Extract mouse speed from config
AutomationRunner.TimeToMoveMouse = config.TimeToMoveMouse;
AutomationRunner.UpDelaySeconds = config.MouseUpDelay;
// Automation runner must do as much as program.cs to spin up platform
string platformFeaturesProvider = "MatterHackers.MatterControl.WindowsPlatformsFeatures, MatterControl.Winforms";
AppContext.Platform = AggContext.CreateInstanceFrom <INativePlatformFeatures>(platformFeaturesProvider);
AppContext.Platform.ProcessCommandline();
var(width, height) = RootSystemWindow.GetStartupBounds();
rootSystemWindow = Application.LoadRootWindow(
overrideWidth == -1 ? width : overrideWidth,
overrideHeight == -1 ? height : overrideHeight);
OemSettings.Instance.ShowShopButton = false;
if (!config.UseAutomationMouse)
{
AutomationRunner.InputMethod = new WindowsInputMethods();
}
await AutomationRunner.ShowWindowAndExecuteTests(
rootSystemWindow,
testMethod,
maxTimeToRun,
defaultTestImages,
closeWindow : () =>
{
if (ApplicationController.Instance.ActivePrinter.Connection.CommunicationState == CommunicationStates.Printing)
{
ApplicationController.Instance.ActivePrinter.Connection.Disable();
}
rootSystemWindow.Close();
});
}