private void tcDeviceSet_SelectedIndexChanged(object sender, EventArgs e)
{
int iSeletedIndex;
iSeletedIndex = tcDeviceSet.SelectedIndex;
switch (iSeletedIndex)
{
default: break;
case 1: gbJogUnit.Parent = pnJog1; break;
case 2: gbJogUnit.Parent = pnJog2; break;
case 3: gbJogUnit.Parent = pnJog3; break;
case 4: gbJogUnit.Parent = pnJog4; break;
case 5: gbJogUnit.Parent = pnJog5; break;
}
UpdateDevInfo(true);
UpdateDevOptn(true);
//LoadTrayMask(OM.GetCrntDev());
PM.UpdatePstn(true);
PM.Load(OM.GetCrntDev());
}
private void btSave_Click(object sender, EventArgs e)
{
string sText = ((Button)sender).Text;
Log.Trace(sFormText + sText + " Button Clicked", ti.Frm);
//Check Running Status.
if (SEQ._bRun)
{
Log.ShowMessage("Warning", "Can't Save during Autorunning!");
return;
}
if (Log.ShowMessageModal("Confirm", "Are you Sure?") != DialogResult.Yes)
{
return;
}
((Button)sender).Enabled = false;
UpdateComOptn(false);
OM.SaveCmnOptn();
UpdateEqpOptn(false);
OM.SaveEqpOptn();
//비전 결과 색 이름 표기
SetDisp(ri.RLT1); SetDisp(ri.RLT2); SetDisp(ri.RLT3);
SetDisp(ri.WRK1); SetDisp(ri.WRK2); SetDisp(ri.WRK3);
SetDisp(ri.PSTB);
SetDisp(ri.SPC);
((Button)sender).Enabled = true;
}
public void ShowPage(int _iPageIdx)
{
FrmDeviceSet.UpdateDevInfo(true);
PM.UpdatePstn(true);
PM.Load(OM.GetCrntDev());
switch (_iPageIdx)
{
case 0: FrmOperation.Show(); break;
case 1: FrmDevice.Show(); break;
case 2: /*FrmMacro .Show();*/ break;
case 3: FrmOption.Show();
FrmOption.bUpdate = true; break;
case 4: FrmSPC.Show(); break;
//FrmSPC .ShowUpdate(); break;
case 5: SM.SetDllMainWin(ref pnBase); break;
default: FrmOperation.Show(); break;
}
}
private void tmUpdate_Tick(object sender, EventArgs e)
{
tmUpdate.Enabled = false;
lbCrntDevice.Text = OM.GetCrntDev();
//Download 버튼 활성화 조건(나중에 확인 진섭)
if (SEQ._iSeqStat == EN_SEQ_STAT.Stop || SEQ._iSeqStat == EN_SEQ_STAT.Error)
{
btDownload.Enabled = true;
}
//접근레벨에 따른 Setting 버튼 활성화
int iLevel = (int)FormPassword.GetLevel();
switch (iLevel)
{
case (int)EN_LEVEL.Operator: btSetting.Enabled = false; break;
case (int)EN_LEVEL.Engineer: btSetting.Enabled = true; break;
case (int)EN_LEVEL.Master: btSetting.Enabled = true; break;
default: break;
}
tmUpdate.Enabled = true;
}
private void SaveJobFile(string _sDevice)
{
string sCommandPath = "C:\\Data\\VisnJobChange.ini";
CIniFile IniCommandSave = new CIniFile(sCommandPath);
IniCommandSave.Save("JobChange", "Device", OM.GetCrntDev());
}
//FormMain FrmMain;
public FormOption(Panel _pnBase)
{
InitializeComponent();
this.TopLevel = false;
this.Parent = _pnBase;
//FrmMain = _FrmMain;
//파일 버전, 수정한날짜 보여줄때 필요한 부분
string sExeFolder = System.Reflection.Assembly.GetExecutingAssembly().GetName().CodeBase;
string FileName = Path.GetFileName(sExeFolder);
FileInfo File = new FileInfo(FileName);
//파일 버전 보여주는 부분
string sFileVersion = System.Windows.Forms.Application.ProductVersion;
lbVer.Text = "Ver " + sFileVersion;
//수정한 날짜 보여주는 부분
double Age = File.LastWriteTime.ToOADate();
string Date = DateTime.FromOADate(Age).ToString("''yyyy'_ 'M'_ 'd'_ 'tt' 'h': 'm''");
lbDate.Text = Date;
UpdateComOptn(true);
OM.LoadCmnOptn();
}
public void ShowPage(int _iPageIdx)
{
FrmDeviceSet.UpdateDevInfo(true);
FrmDeviceSet.UpdateDevOptn(true);
PM.UpdatePstn(true);
PM.Load(OM.GetCrntDev());
switch (_iPageIdx)
{
case 0: FrmOperation.Show(); break;
case 1: break;
case 2: FrmDevice.Show(); break;
case 3: FrmOption.Show(); break;
case 4: FrmSPC.FormInit();
FrmSPC.Show(); break;
case 5: SML.SetDllMainWin(ref pnBase); break;
default: FrmOperation.Show(); break;
}
}
public FormOption(Panel _pnBase)
{
InitializeComponent();
this.TopLevel = false;
this.Parent = _pnBase;
UpdateComOptn(true);
UpdateEqpOptn(true);
OM.LoadCmnOptn();
//Scable Setting
this.Dock = DockStyle.Fill;
int _iWidth = _pnBase.Width;
int _iHeight = _pnBase.Height;
const int iWidth = 1280;
const int iHeight = 863;
float widthRatio = _iWidth / (float)iWidth; // this.ClientSize.Width;//1280f;
float heightRatio = _iHeight / (float)iHeight; //.ClientSize.Height; //863f ;
SizeF scale = new SizeF(widthRatio, heightRatio);
//this.Scale(scale);
foreach (Control control in this.Controls)
{
control.Scale(scale);
//control.Font = new Font("Verdana", control.Font.SizeInPoints * heightRatio * widthRatio);
}
}
private bool DeviceChange(string _sDevName)
{
bool bRet = true;
if (!OM.LoadJobFile(_sDevName))
{
return(false);
}
SEQ.Visn.SendJobChange(_sDevName);
PM.Load(_sDevName);
CConfig Config = new CConfig();
string sExeFolder = System.AppDomain.CurrentDomain.BaseDirectory;
string sDevOptnPath = sExeFolder + "JobFile\\" + _sDevName + "\\TrayMask.ini";
Config.Load(sDevOptnPath, CConfig.EN_CONFIG_FILE_TYPE.ftIni);
DM.ARAY[ri.MASK].Load(Config, true);
CDelayTimer TimeOut = new CDelayTimer();
TimeOut.Clear();
while (!SEQ.Visn.GetSendCycleEnd(VisnCom.vs.JobChange))
{
Thread.Sleep(1);
if (TimeOut.OnDelay(8000))
{
Log.ShowMessage("Vision", "Device Change TimeOut");
bRet = false;
break;
}
}
PM.UpdatePstn(true);
DM.ARAY[ri.SPLR].SetMaxColRow(1, 1);
DM.ARAY[ri.IDXR].SetMaxColRow(OM.DevInfo.iTRAY_PcktCntX, OM.DevInfo.iTRAY_PcktCntY);
DM.ARAY[ri.IDXF].SetMaxColRow(OM.DevInfo.iTRAY_PcktCntX, OM.DevInfo.iTRAY_PcktCntY);
DM.ARAY[ri.PCKR].SetMaxColRow(1, 1);
DM.ARAY[ri.TRYF].SetMaxColRow(OM.DevInfo.iTRAY_PcktCntX, OM.DevInfo.iTRAY_PcktCntY);
DM.ARAY[ri.TRYG].SetMaxColRow(OM.DevInfo.iTRAY_PcktCntX, OM.DevInfo.iTRAY_PcktCntY);
DM.ARAY[ri.OUTZ].SetMaxColRow(1, 1);
DM.ARAY[ri.STCK].SetMaxColRow(1, OM.DevInfo.iTRAY_StackingCnt);
DM.ARAY[ri.BARZ].SetMaxColRow(1, 1);
DM.ARAY[ri.INSP].SetMaxColRow(1, OM.DevInfo.iTRAY_PcktCntY);
DM.ARAY[ri.PSTC].SetMaxColRow(1, 1);
DM.ARAY[ri.MASK].SetMaxColRow(OM.DevInfo.iTRAY_PcktCntX, OM.DevInfo.iTRAY_PcktCntY);
DM.ARAY[ri.TRYF].SetStat(cs.Empty);
DM.ARAY[ri.TRYG].SetStat(cs.Good);
DM.ARAY[ri.STCK].SetStat(cs.Empty);
DM.ARAY[ri.INSP].SetStat(cs.Good);
DM.ARAY[ri.IDXR].SetMask(DM.ARAY[ri.MASK]);
DM.ARAY[ri.IDXF].SetMask(DM.ARAY[ri.MASK]);
DM.ARAY[ri.TRYF].SetMask(DM.ARAY[ri.MASK]);
DM.ARAY[ri.TRYG].SetMask(DM.ARAY[ri.MASK]);
return(bRet);
}
private void btSave_Click(object sender, EventArgs e)
{
string sText = ((Button)sender).Text;
Log.Trace(sFormText + sText + " Button Clicked", ti.Frm);
UpdateMstOptn(false);
OM.SaveMstOptn();
}
public FormLotOpen()
{
InitializeComponent();
tbSelDevice.Text = OM.GetCrntDev();
tbLotNo.Text = "";
tbLotNo.Focus();
}
public static void Init()
{
SML.TPara Para;
Para.sParaFolderPath = Directory.GetCurrentDirectory() + "\\Util\\";
Para.iWidth = 1280;
Para.iHeight = 863;
Para.bTabHides = new bool[6];
Para.bUseErrPic = true;
Para.iCntErr = 60;
Para.iCntDIn = 32;
Para.iCntDOut = 32;
Para.iCntCylinder = 9;
Para.iCntMotr = 3;
Para.eLanSel = EN_LAN_SEL.English;
Para.eDio = EN_DIO_SEL.AXL;
Para.eMotors = new EN_MOTR_SEL[Para.iCntMotr];
Para.eMotors[0] = EN_MOTR_SEL.AXL;
Para.eMotors[1] = EN_MOTR_SEL.AXL;
Para.eMotors[2] = EN_MOTR_SEL.AXL;
SML.Init(Para);
DM.Init();
OM.Init();
LOT.Init();
SPC.Init();
PM.Init(PM.PstnCnt);
MainThread.Priority = ThreadPriority.Highest;
//MainThread.Priority = ThreadPriority.Normal;
MainThread.Start();
m_tmToStop = new CDelayTimer();
m_tmToStrt = new CDelayTimer();
m_tmFlickOn = new CDelayTimer();
m_tmFlickOff = new CDelayTimer();
m_tmCloseDoor = new CDelayTimer();
m_tmTemp = new CDelayTimer();
m_bBtnReset = false;
m_bBtnStart = false;
m_bBtnStop = false;
m_bBtnAir = false;
m_bRun = false;
m_bRunEdge = false;
m_bFlick = false;
m_iStep = EN_SEQ_STEP.Idle;
m_iSeqStat = EN_SEQ_STAT.Stop;
//Run End Buzzer.
m_bRunEnd = false;
m_Part[(int)pi.IDX] = IDX;
}
public static void Close()
{
MainThread.Abort();
MainThread.Join();
SM.Close();
OM.Close();
LOT.Close();
SPC.Close();
}
private void btSetting_Click(object sender, EventArgs e) //DeviceSet Form 띄움
{
this.Hide();
FrmMain.FrmDeviceSet.Show();
FrmMain.FrmDeviceSet.UpdateDevOptn(true);
FrmMain.FrmDeviceSet.UpdateDevInfo(true);
PM.UpdatePstn(true);
PM.Load(OM.GetCrntDev());
}
public FormOption(Panel _pnBase)
{
InitializeComponent();
this.TopLevel = false;
this.Parent = _pnBase;
UpdateComOptn(true);
UpdateEqpOptn(true);
OM.LoadCmnOptn();
}
public FormLotOpen()
{
InitializeComponent();
tbSelDevice.Text = OM.GetCrntDev();
tbLotNo.Text = "";
tbEmployeeID.Text = SM.FrmLogOn.GetId();
tbLotNo.Focus();
}
private void lbOption1_DoubleClick(object sender, EventArgs e)
{
int iBtnTag = Convert.ToInt32(((Label)sender).Tag);
switch (iBtnTag)
{
default: break;
//case 1: OM.CmnOptn.bIgnrDoor = !OM.CmnOptn.bIgnrDoor ; break;
//case 2: OM.CmnOptn.bVisnSkip = !OM.CmnOptn.bVisnSkip ; break;
//case 3: OM.CmnOptn.bMrkingSkip = !OM.CmnOptn.bMrkingSkip ; break;
}
OM.SaveCmnOptn();
}
private void btSetting_Click(object sender, EventArgs e) //DeviceSet Form 띄움
{
string sText = ((Button)sender).Text;
Log.Trace(sFormText + sText + " Button Clicked", ti.Frm);
this.Hide();
FrmMain.FrmDeviceSet.Show();
FrmMain.FrmDeviceSet.UpdateDevInfo(true);
PM.UpdatePstn(true);
PM.Load(OM.GetCrntDev());
}
public FormLotOpen()
{
InitializeComponent();
tbSelDevice.Text = OM.GetCrntDev();
tbLotNo.Text = "";
tbEmployeeID.Text = ""; //20180125 SML.FrmLogOn.GetId();
tbMaterialNo.Text = "";
tbLotAlias.Text = "";
tbLotNo.Focus();
}
private void btRename_Click(object sender, EventArgs e)
{
string sText = ((Button)sender).Text;
Log.Trace(sFormText + sText + " Button Clicked", ForContext.Frm);
if (tbFromName.Text == "")
{
//Log.ShowMessage("Error", "선택된 JOB FILE 이름이 없습니다.");
Log.ShowMessage("Error", "The selected JOB FILE name is missing.");
return;
}
if (tbToName.Text == "")
{
//Log.ShowMessage("Error", "입력된 JOB FILE 이름이 없습니다.");
Log.ShowMessage("Error", "Enter JOB FILE name is missing.");
return;
}
string sFromPath;
string sToPath;
sFromPath = Application.StartupPath + "\\JobFile\\" + tbFromName.Text;
sToPath = Application.StartupPath + "\\JobFile\\" + tbToName.Text;
DirectoryInfo di = new DirectoryInfo(sToPath);
if (di.Exists == false)
{
//if (Log.ShowMessageModal("Confirm", "잡파일 이름을 변경하시겠습니까?") != DialogResult.Yes) return;
if (Log.ShowMessageModal("Confirm", "Do you want to change the JOB FILE Name?") != DialogResult.Yes)
{
return;
}
RenameFolder(sFromPath, sToPath);
}
if (di.Exists == true)
{
//Log.ShowMessage("Warning", "같은 이름의 JOB FILE이 존재합니다.");
Log.ShowMessage("Warning", "File with the same name exists.");
return;
}
OM.SetCrntDev(tbToName.Text);
DispDevice();
//Trace Log.
//Log.Trace("JobFile", (tbToName.Text + " is Maked by Rename"));
SaveDeviceLog(3, tbFromName.Text, tbToName.Text);
}
private void FormLotOpen_VisibleChanged(object sender, EventArgs e)
{
this.Left = 0;
this.Top = 0;
tbSelDevice.Text = OM.GetCrntDev();
tbEmployeeID.Text = ""; //LOT.CrntLotData.sEmployeeID ; //20180125 SML.FrmLogOn.GetId();
tbLotNo.Text = ""; //"HZ7170CU.98";
tbMaterialNo.Text = ""; //"11082611";
tbLotAlias.Text = ""; //"5R-ebxD68-0";
tbLotNo.Focus();
lbConDB.Visible = false;
}
private void btSave_Click(object sender, EventArgs e)
{
Log.Trace("SAVE", "Clicked");
if (Log.ShowMessageModal("Confirm", "Are you Sure?") != DialogResult.Yes)
{
return;
}
UpdateDevInfo(false);
UpdateNodePos(false);
UpdateDevOptn(false);
if (WorkDistanceCal() > 200)
{
Log.ShowMessage("Warring", "작업길이 최대치를 넘어갔습니다.");
return;
}
if (WorkDistanceCal() > OM.MstOptn.dMAXWorkDist && !OM.DevOptn.bShiftWork)
{
if (Log.ShowMessageModal("Warring", "Used ShiftWork ?") != DialogResult.Yes)
{
return;
}
cbshiftWork.Checked = true;
Refresh();
}
OM.SaveDevInfo(OM.GetCrntDev().ToString());
OM.SaveNodePos(OM.GetCrntDev().ToString());
OM.SaveDevOptn(OM.GetCrntDev().ToString());
pbLine.Refresh();
PM.UpdatePstn(false);
PM.Save(OM.GetCrntDev());
tbWorkDist.Text = OM.DevOptn.dWorkDist.ToString();
tbWorkDist2.Text = OM.DevOptn.dWorkDist.ToString();
//DM.ARAY[(int)ri.REAR ].SetMaxColRow(OM.DevInfo.iRearColCnt , OM.DevInfo.iRearRowCnt );
//DM.ARAY[(int)ri.FRNT ].SetMaxColRow(OM.DevInfo.iFrntColCnt , OM.DevInfo.iFrntRowCnt );
OM.SaveEqpOptn();
}
public FormMaster()
{
InitializeComponent();
//Input ListView
lvSequence.Clear();
lvSequence.View = View.Details;
lvSequence.FullRowSelect = true;
lvSequence.MultiSelect = true;
lvSequence.GridLines = true;
lvSequence.Columns.Add("Eabled", 60, HorizontalAlignment.Left);
lvSequence.Columns.Add("Part Name", 90, HorizontalAlignment.Left);
lvSequence.Columns.Add("ToSTart", 60, HorizontalAlignment.Left);
lvSequence.Columns.Add("Seq", 60, HorizontalAlignment.Left);
lvSequence.Columns.Add("Cycle", 60, HorizontalAlignment.Left);
lvSequence.Columns.Add("ToStop", 60, HorizontalAlignment.Left);
lvSequence.Columns.Add("Home", 60, HorizontalAlignment.Left);
ListViewItem [] liInput = new ListViewItem [(int)pi.MAX_PART];
for (int i = 0; i < (int)pi.MAX_PART; i++)
{
liInput[i] = new ListViewItem("");
liInput[i].SubItems.Add(SEQ.m_Part[i].GetPartName());
liInput[i].SubItems.Add("");
liInput[i].SubItems.Add("");
liInput[i].SubItems.Add("");
liInput[i].SubItems.Add("");
liInput[i].SubItems.Add("");
liInput[i].UseItemStyleForSubItems = false;
lvSequence.Items.Add(liInput[i]);
cbPart[i] = new CheckBox();
cbPart[i].Text = "";
cbPart[i].Size = new System.Drawing.Size(13, 13);
lvSequence.Controls.Add(cbPart[i]);
cbPart[i].Left = 15;
cbPart[i].Top = iLvHeadHeight + iLvCellHeight * i;
}
var PropInput = lvSequence.GetType().GetProperty("DoubleBuffered", BindingFlags.Instance | BindingFlags.NonPublic);
PropInput.SetValue(lvSequence, true, null);
UpdateMstOptn(true);
OM.LoadMstOptn();
}
//public static List<double> lstTime ;
//static FileStream fs;
//static StreamWriter sw;
//static bool bFst ;
//static double dPreTime2;
//static public void SaveCsv(ref List<double> _lst,string _sPath = "")
//{
// string sPath1 = @"D:\" + _sPath + ".csv";
// string sPath2 = @"D:\TimeCheck.csv" ;
// if(!bFst)
// {
// fs = new FileStream(sPath1, FileMode.Append, FileAccess.Write);
// sw = new StreamWriter(fs, Encoding.UTF8);
// bFst = true;
// }
// string line = "";
// for(int i=0; i<_lst.Count; i++) {
// line += string.Format("{0:0.0000}",_lst[i]) + ",";
// }
// sw.WriteLine(line);
//}
//public static double GetTime()
//{
// double dCrntTime = CTimer.GetTime_us();
// double dTime = (dCrntTime - dPreTime2) / 1000.0;
// dPreTime2 = dCrntTime;
// return dTime;
//}
//SaveCsv(ref lstTime,sPath);
public static void Update()
{
//lstTime = new List<double>();
//string sPath = DateTime.Now.ToString("HHmmss");
double dPreTime = CTimer.GetTime_us();
double dCrntTime;
while (true)
{
dCrntTime = CTimer.GetTime_us();
m_dMainThreadCycleTime = (dCrntTime - dPreTime) / 1000.0;
dPreTime = dCrntTime;
Thread.Sleep(0);
//Motion Dll Update
SM.Update(m_iSeqStat);
//Part
for (int i = 0; i < (int)pi.MAX_PART; i++)
{
m_Part[i].Update();
}
//Inspection
InspectMainAir();
InspectEmergency();
InspectActuator();
InspectMotor();
InspectCrash();
InspectTemp();
//Update ErrorProc.
UpdateButton();
//Check Button.
UpdateSeqState();
//Update Motor State (Input)
MM.Update();
//SPC
SPC.Update(LOT.CrntLotData.sLotNo, OM.GetCrntDev(), m_iSeqStat, OM.EqpStat.bMaint);
//Vision Communication
VC.Update();
//SEQ.BarcordPrnt.Update();
}
}
public static void Update()
{
double dPreTime = CTimer.GetTime_us();
double dCrntTime;
while (true)
{
dCrntTime = CTimer.GetTime_us();
m_dMainThreadCycleTime = (dCrntTime - dPreTime) / 1000.0;
if (m_dMainThreadCycleTime > 2)
{
Log.Trace(m_dMainThreadCycleTime.ToString());
}
dPreTime = dCrntTime;
Thread.Sleep(1);
//Motion Dll Update
SM.Update(m_iSeqStat);
//Part
for (int i = 0; i < (int)pi.MAX_PART; i++)
{
m_Part[i].Update();
}
//Inspection
InspectMainAir();
InspectEmergency();
InspectActuator();
InspectMotor();
InspectCrash();
InspectTemp();
InspectLightGrid();
//Update ErrorProc.
UpdateButton();
//Check Button.
UpdateSeqState();
//Update Motor State (Input)
MM.Update();
//SPC
SPC.Update(LOT.GetLotNo(), OM.GetCrntDev(), m_iSeqStat, OM.EqpStat.bMaint);
}
}
private void btDelete_Click(object sender, EventArgs e)
{
string sText = ((Button)sender).Text;
Log.Trace(sFormText + sText + " Button Clicked", ForContext.Frm);
//Check None Name.
if (tbFromName.Text == "")
{ //아무것도 선택되지 않은 경우.
//Log.ShowMessage("Error", "선택된 JOB FILE 이름이 없습니다." );
Log.ShowMessage("Error", "The selected JOB FILE name is missing.");
return;
}
string sPath;
sPath = Application.StartupPath + "\\JobFile\\" + tbFromName.Text;
DirectoryInfo di = new DirectoryInfo(sPath);
if (di.Exists == true)
{
//if (Log.ShowMessageModal("Confirm", "선택된 JOB FILE을 삭제하시겠습니까?") != DialogResult.Yes) return;
if (Log.ShowMessageModal("Confirm", "Do you want to delete the selected JOB FILE?") != DialogResult.Yes)
{
return;
}
DeleteFolder(sPath);
}
if (tbFromName.Text == OM.GetCrntDev())
{
//Log.ShowMessage("Warning", "현재 사용중인 JOB FILE은 삭제할 수 없습니다." );
Log.ShowMessage("Warning", "JOB FILE currently in use cannot be deleted.");
return;
}
DispDevice();
//Trace Log.
//Log.Trace("JobFile", (tbFromName.Text + " is Deleted"));
SaveDeviceLog(4, tbFromName.Text);
//pbStatus.Minimum = 0;
//UserFile.GridSearchDir(ExtractFilePath(Application->ExeName) + "JobFile", sgDevice, 1, true); // 디렉토리 읽어와서 날짜와 알파벳 순으로 정렬
//sgDevice->Row = 0;
}
public static void Update()
{
double dPreTime = CTimer.GetTime_us();
double dCrntTime;
while (true)
{
dCrntTime = CTimer.GetTime_us();
m_dMainThreadCycleTime = (dCrntTime - dPreTime) / 1000.0;
dPreTime = dCrntTime;
Thread.Sleep(0);
SML.Update(m_iSeqStat);
//Part
for (int i = 0; i < (int)pi.MAX_PART; i++)
{
m_Part[i].Update();
}
//Inspection
InspectMainAir();
InspectEmergency();
InspectActuator();
InspectMotor();
InspectCrash();
InspectTemp();
InspectFlowMeter();
//Update ErrorProc.
UpdateButton();
//Check Button.
UpdateSeqState();
//Update Motor State (Input)
MM.Update();
//SPC
SPC.Update(LOT.CrntLotData.sEmployeeID, LOT.CrntLotData.sLotNo, OM.GetCrntDev(), m_iSeqStat, OM.EqpStat.bMaint);
//Vision Communication
Visn.Update();
SEQ.BarcordPrnt.Update();
}
}
private void btSavePosition_Click(object sender, EventArgs e)
{
string sText = ((Button)sender).Text;
Log.Trace(sFormText + sText + " Button Clicked", ForContext.Frm);
if (Log.ShowMessageModal("Confirm", "Are you Sure?") != DialogResult.Yes)
{
return;
}
PM.UpdatePstn(false);
PM.Save(OM.GetCrntDev());
PM.UpdatePstn(true);
Refresh();
}
private void btSave_Click(object sender, EventArgs e)
{
//Check Running Status.
if (SEQ._bRun)
{
Log.ShowMessage("Warning", "Can't Save during Autorunning!");
return;
}
if (Log.ShowMessageModal("Confirm", "Are you Sure?") != DialogResult.Yes)
{
return;
}
UpdateComOptn(false);
OM.SaveCmnOptn();
}
public static void Close()
{
MainThread.Abort();
MainThread.Join();
SM.Close();
OM.Close();
LOT.Close();
SPC.Close();
//for (int i = 1; i < (int)si.MAX_RS232; i++)
//{
// Com[i].PortClose();
//}
//ML.IO_SetY(yi.SSTG_HeaterOn,false);
//SEQ.Oracle.CloseDB();
}