Beispiel #1
0
        private KMLRoot CreateKmlFeat() {
            KMLRoot kml = new KMLRoot();
            Folder fldr = new Folder("Test Folder");
            fldr.Add(new Folder("Sub Folder"));

            GroundOverlay g = new GroundOverlay();
            g.altitude = 100;
            g.altitudeMode = AltitudeMode.relativeToGround;
            g.color = Color.Blue;
            g.description = "Cool overlay";

            fldr.Add(g);
            kml.Feature = fldr;

            return kml;
        }
Beispiel #2
0
        private KMLRoot CreateKmlDoc() {
            KMLRoot kml = new KMLRoot();
            Placemark pm = new Placemark();
            pm.name = "foo";
            pm.Point = new KmlPoint(120, 45, 50);
            pm.Snippet = "foo is cool";
            pm.Snippet.maxLines = 1;

            Folder fldr = new Folder("Test Folder");

            kml.Document.Add(pm);
            kml.Document.Add(new Placemark());
            kml.Document.Add(fldr);

            return kml;
        }
        private void writeKML(string filename)
        {
            try
            {
                writeGPX(filename);
            }
            catch { }

            Color[] colours = { Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo, Color.Violet, Color.Pink };

            AltitudeMode altmode = AltitudeMode.absolute;

            if (MainV2.cs.firmware == MainV2.Firmwares.ArduCopter2)
            {
                altmode = AltitudeMode.relativeToGround; // because of sonar, this is both right and wrong. right for sonar, wrong in terms of gps as the land slopes off.
            }

            KMLRoot kml = new KMLRoot();
            Folder fldr = new Folder("Log");

            Style style = new Style();
            style.Id = "yellowLineGreenPoly";
            style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));

            PolyStyle pstyle = new PolyStyle();
            pstyle.Color = HexStringToColor("7f00ff00");
            style.Add(pstyle);

            kml.Document.AddStyle(style);

            int stylecode = 0xff;
            int g = -1;
            foreach (List<Point3D> poslist in position)
            {
                g++;
                if (poslist == null)
                    continue;

                LineString ls = new LineString();
                ls.AltitudeMode = altmode;
                ls.Extrude = true;
                //ls.Tessellate = true;

                Coordinates coords = new Coordinates();
                coords.AddRange(poslist);

                ls.coordinates = coords;

                Placemark pm = new Placemark();

                string mode = "";
                if (g < modelist.Count)
                    mode = modelist[g];

                pm.name = g + " Flight Path " + mode;
                pm.styleUrl = "#yellowLineGreenPoly";
                pm.LineString = ls;

                stylecode = colours[g % (colours.Length - 1)].ToArgb();

                Style style2 = new Style();
                Color color = Color.FromArgb(0xff, (stylecode >> 16) & 0xff, (stylecode >> 8) & 0xff, (stylecode >> 0) & 0xff);
                log.Info("colour " + color.ToArgb().ToString("X") + " " + color.ToKnownColor().ToString());
                style2.Add(new LineStyle(color, 4));

                pm.AddStyle(style2);

                fldr.Add(pm);
            }

            Folder planes = new Folder();
            planes.name = "Planes";
            fldr.Add(planes);

            Folder waypoints = new Folder();
            waypoints.name = "Waypoints";
            fldr.Add(waypoints);

            LineString lswp = new LineString();
            lswp.AltitudeMode = AltitudeMode.relativeToGround;
            lswp.Extrude = true;

            Coordinates coordswp = new Coordinates();

            foreach (PointLatLngAlt p1 in cmd)
            {
                coordswp.Add(new Point3D(p1.Lng, p1.Lat, p1.Alt));
            }

            lswp.coordinates = coordswp;

            Placemark pmwp = new Placemark();

            pmwp.name = "Waypoints";
            //pm.styleUrl = "#yellowLineGreenPoly";
            pmwp.LineString = lswp;

            waypoints.Add(pmwp);

            int a = 0;
            int l = -1;

            Model lastmodel = null;

            foreach (Data mod in flightdata)
            {
                l++;
                if (mod.model.Location.latitude == 0)
                    continue;

                if (lastmodel != null)
                {
                    if (lastmodel.Location.Equals(mod.model.Location))
                    {
                        continue;
                    }
                }
                Placemark pmplane = new Placemark();
                pmplane.name = "Plane " + a;

                pmplane.visibility = false;

                Model model = mod.model;
                model.AltitudeMode = altmode;
                model.Scale.x = 2;
                model.Scale.y = 2;
                model.Scale.z = 2;

                try
                {
                    pmplane.description = @"<![CDATA[
              <table>
                <tr><td>Roll: " + model.Orientation.roll + @" </td></tr>
                <tr><td>Pitch: " + model.Orientation.tilt + @" </td></tr>
                <tr><td>Yaw: " + model.Orientation.heading + @" </td></tr>
                <tr><td>WP dist " + mod.ntun[2] + @" </td></tr>
                <tr><td>tar bear " + mod.ntun[3] + @" </td></tr>
                <tr><td>nav bear " + mod.ntun[4] + @" </td></tr>
                <tr><td>alt error " + mod.ntun[5] + @" </td></tr>
              </table>
            ]]>";
                }
                catch { }

                try
                {

                    pmplane.Point = new KmlPoint((float)model.Location.longitude, (float)model.Location.latitude, (float)model.Location.altitude);
                    pmplane.Point.AltitudeMode = altmode;

                    Link link = new Link();
                    link.href = "block_plane_0.dae";

                    model.Link = link;

                    pmplane.Model = model;

                    planes.Add(pmplane);
                }
                catch { } // bad lat long value

                lastmodel = mod.model;

                a++;
            }

            kml.Document.Add(fldr);

            kml.Save(filename);

            // create kmz - aka zip file

            FileStream fs = File.Open(filename.Replace(".log.kml", ".kmz"), FileMode.Create);
            ZipOutputStream zipStream = new ZipOutputStream(fs);
            zipStream.SetLevel(9); //0-9, 9 being the highest level of compression
            zipStream.UseZip64 = UseZip64.Off; // older zipfile

            // entry 1
            string entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
            ZipEntry newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            byte[] buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();

            File.Delete(filename);

            filename = Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + "block_plane_0.dae";

            // entry 2
            entryName = ZipEntry.CleanName(Path.GetFileName(filename)); // Removes drive from name and fixes slash direction
            newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();

            zipStream.IsStreamOwner = true;	// Makes the Close also Close the underlying stream
            zipStream.Close();

            positionindex = 0;
            modelist.Clear();
            flightdata.Clear();
            position = new List<Core.Geometry.Point3D>[200];
            cmd.Clear();
        }
Beispiel #4
0
        public void writeKML(string filename)
        {
            try
            {
                writeGPX(filename);

                writeRinex(filename);
            }
            catch
            {
            }

            Color[] colours =
            {
                Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo,
                Color.Violet, Color.Pink
            };

            AltitudeMode altmode = AltitudeMode.absolute;

            KMLRoot kml = new KMLRoot();
            Folder fldr = new Folder("Log");

            Style style = new Style();
            style.Id = "yellowLineGreenPoly";
            style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));

            Style style1 = new Style();
            style1.Id = "spray";
            style1.Add(new LineStyle(HexStringToColor("4c0000ff"), 0));
            style1.Add(new PolyStyle() {Color = HexStringToColor("4c0000ff")});

            PolyStyle pstyle = new PolyStyle();
            pstyle.Color = HexStringToColor("7f00ff00");
            style.Add(pstyle);

            kml.Document.AddStyle(style);
            kml.Document.AddStyle(style1);

            int stylecode = 0xff;
            int g = -1;
            foreach (List<Point3D> poslist in position)
            {
                g++;
                if (poslist == null)
                    continue;

                /*
                List<PointLatLngAlt> pllalist = new List<PointLatLngAlt>();

                foreach (var point in poslist)
                {
                    pllalist.Add(new PointLatLngAlt(point.Y, point.X, point.Z, ""));
                }

                var ans = Utilities.LineOffset.GetPolygon(pllalist, 2);



                while (ans.Count > 0)
                {
                    var first = ans[0];
                    var second = ans[1];
                    var secondlast = ans[ans.Count - 2];
                    var last = ans[ans.Count-1];

                    ans.Remove(first);
                    ans.Remove(last);

                    var polycoords = new BoundaryIs();

                    polycoords.LinearRing = new LinearRing();

                    polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(second.Lng, second.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(secondlast.Lng, secondlast.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(last.Lng, last.Lat, 1));
                    polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));

                    //if (!IsClockwise(polycoords.LinearRing.Coordinates))
                      //  polycoords.LinearRing.Coordinates.Reverse();

                    Polygon kmlpoly = new Polygon() { AltitudeMode = AltitudeMode.relativeToGround, Extrude = false, OuterBoundaryIs = polycoords };

                    Placemark pmpoly = new Placemark();
                    pmpoly.Polygon = kmlpoly;
                    pmpoly.name = g + " test";
                    pmpoly.styleUrl = "#spray";

                    fldr.Add(pmpoly);
                }
                */
                LineString ls = new LineString();
                ls.AltitudeMode = altmode;
                ls.Extrude = true;
                //ls.Tessellate = true;

                Coordinates coords = new Coordinates();
                coords.AddRange(poslist);

                ls.coordinates = coords;

                Placemark pm = new Placemark();

                string mode = "";
                if (g < modelist.Count)
                    mode = modelist[g];

                pm.name = g + " Flight Path " + mode;
                pm.styleUrl = "#yellowLineGreenPoly";
                pm.LineString = ls;

                stylecode = colours[g%(colours.Length - 1)].ToArgb();

                Style style2 = new Style();
                Color color = Color.FromArgb(0xff, (stylecode >> 16) & 0xff, (stylecode >> 8) & 0xff,
                    (stylecode >> 0) & 0xff);
                log.Info("colour " + color.ToArgb().ToString("X") + " " + color.ToKnownColor().ToString());
                style2.Add(new LineStyle(color, 4));


                pm.AddStyle(style2);

                fldr.Add(pm);
            }

            Placemark pmPOS = new Placemark();
            pmPOS.name = "POS Message";
            pmPOS.LineString = new LineString();
            pmPOS.LineString.coordinates = new Coordinates();
            Point3D lastPoint3D = new Point3D();
            PointLatLngAlt lastplla = PointLatLngAlt.Zero;
            foreach (var item in PosLatLngAlts)
            {
                var newpoint = new Point3D(item.Lng, item.Lat, item.Alt);

                if (item.GetDistance(lastplla) < 0.1 &&
                    lastPoint3D.Z >= (newpoint.Z - 0.3) &&
                    lastPoint3D.Z <= (newpoint.Z + 0.3))
                    continue;

                pmPOS.LineString.coordinates.Add(newpoint);
                lastPoint3D = newpoint;
                lastplla = item;
                if (pmPOS.LineString.coordinates.Count > 20000)
                {
                    //add current
                    pmPOS.AddStyle(style);
                    fldr.Add(pmPOS);

                    // create new
                    pmPOS = new Placemark();
                    pmPOS.name = "POS Message - extra";
                    pmPOS.LineString = new LineString();
                    pmPOS.LineString.coordinates = new Coordinates();
                    lastPoint3D = new Point3D();
                    lastplla = PointLatLngAlt.Zero;
                }
            }
            pmPOS.AddStyle(style);
            fldr.Add(pmPOS);

            Folder planes = new Folder();
            planes.name = "Planes";
            fldr.Add(planes);

            Folder waypoints = new Folder();
            waypoints.name = "Waypoints";
            fldr.Add(waypoints);


            LineString lswp = new LineString();
            lswp.AltitudeMode = AltitudeMode.relativeToGround;
            lswp.Extrude = true;

            Coordinates coordswp = new Coordinates();

            foreach (PointLatLngAlt p1 in cmd)
            {
                if (p1.Lng == 0 && p1.Lat == 0)
                    continue;

                coordswp.Add(new Point3D(p1.Lng, p1.Lat, p1.Alt));
            }

            lswp.coordinates = coordswp;

            Placemark pmwp = new Placemark();

            pmwp.name = "Waypoints";
            //pm.styleUrl = "#yellowLineGreenPoly";
            pmwp.LineString = lswp;

            if (coordswp.Count > 0)
                waypoints.Add(pmwp);

            int a = 0;
            int l = -1;

            Model lastmodel = null;

            foreach (Data mod in flightdata)
            {
                l++;
                if (mod.model.Location.latitude == 0)
                    continue;

                if (lastmodel != null)
                {
                    if (lastmodel.Location.Equals(mod.model.Location))
                    {
                        continue;
                    }
                }
                Placemark pmplane = new Placemark();
                pmplane.name = "Plane " + a;

                pmplane.visibility = false;

                Model model = mod.model;
                model.AltitudeMode = altmode;
                model.Scale.x = 2;
                model.Scale.y = 2;
                model.Scale.z = 2;

                try
                {
                    pmplane.description = @"<![CDATA[
              <table>
                <tr><td>Roll: " + model.Orientation.roll + @" </td></tr>
                <tr><td>Pitch: " + model.Orientation.tilt + @" </td></tr>
                <tr><td>Yaw: " + model.Orientation.heading + @" </td></tr>
                <tr><td>WP dist " + mod.ntun[2] + @" </td></tr>
				<tr><td>tar bear " + mod.ntun[3] + @" </td></tr>
				<tr><td>nav bear " + mod.ntun[4] + @" </td></tr>
				<tr><td>alt error " + mod.ntun[5] + @" </td></tr>
              </table>
            ]]>";
                }
                catch
                {
                }

                try
                {
                    pmplane.Point = new KmlPoint((float) model.Location.longitude, (float) model.Location.latitude,
                        (float) model.Location.altitude);
                    pmplane.Point.AltitudeMode = altmode;

                    Link link = new Link();
                    link.href = "block_plane_0.dae";

                    model.Link = link;

                    pmplane.Model = model;

                    planes.Add(pmplane);
                }
                catch
                {
                } // bad lat long value

                lastmodel = mod.model;

                a++;
            }

            kml.Document.Add(fldr);

            kml.Save(filename);

            // create kmz - aka zip file

            FileStream fs = File.Open(filename.ToLower().Replace(".log.kml", ".kmz").Replace(".bin.kml", ".kmz"),
                FileMode.Create);
            ZipOutputStream zipStream = new ZipOutputStream(fs);
            zipStream.SetLevel(9); //0-9, 9 being the highest level of compression
            zipStream.UseZip64 = UseZip64.Off; // older zipfile

            // entry 1
            string entryName = ZipEntry.CleanName(Path.GetFileName(filename));
                // Removes drive from name and fixes slash direction
            ZipEntry newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            byte[] buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();

            File.Delete(filename);

            filename = Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar +
                       "block_plane_0.dae";

            // entry 2
            entryName = ZipEntry.CleanName(Path.GetFileName(filename));
                // Removes drive from name and fixes slash direction
            newEntry = new ZipEntry(entryName);
            newEntry.DateTime = DateTime.Now;

            zipStream.PutNextEntry(newEntry);

            // Zip the file in buffered chunks
            // the "using" will close the stream even if an exception occurs
            buffer = new byte[4096];
            using (FileStream streamReader = File.OpenRead(filename))
            {
                StreamUtils.Copy(streamReader, zipStream, buffer);
            }
            zipStream.CloseEntry();


            zipStream.IsStreamOwner = true; // Makes the Close also Close the underlying stream
            zipStream.Close();

            positionindex = 0;
            modelist.Clear();
            flightdata.Clear();
            position = new List<Core.Geometry.Point3D>[200];
            cmd.Clear();
        }
        public void PlatformBehaviorToKML()
        {
            var jaxOpsArea = new GeoArray(new Geo(29.3590, -79.2195),
                                          new Geo(31.1627, -79.2195),
                                          new Geo(31.1627, -81.2789),
                                          new Geo(30.1627, -81.2789),
                                          new Geo(29.3590, -80.8789),
                                          new Geo(29.3590, -79.2195));

            var platform = new Platform
            {
                PlatformName = "Test Platform",
                Perimeter = jaxOpsArea,
                Depth = 0,
                IsRandom = true,
                TrackType = TrackType.PerimeterBounce,
                Sources = new ObservableList<Source>(),
                Speed = 20,
            };
            var source = new Source
            {
                SourceName = "Test Source",
                Modes = new ObservableList<Mode>(),
                Platform = platform,
            };
            platform.Sources.Add(source);
            var mode = new Mode
            {
                ModeName = "Test Mode",
                PulseInterval = new TimeSpan(0, 0, 0, 10),
                PulseLength = new TimeSpan(0, 0, 0, 0, 500),
                Depth = 5,
                HighFrequency = 1000,
                LowFrequency = 1000,
                DepressionElevationAngle = 10,
                VerticalBeamWidth = 90,
                SourceLevel = 200,
                Source = source,
            };
            source.Modes.Add(mode);

            var behavior = new PlatformBehavior(platform, new TimeSpan(0, 0, 0, 1), 86400);
#if true
            var kml = new KMLRoot();
            var folder = new Folder("Jacksonville");
            jaxOpsArea.Placemark.name = "Jacksonville OpArea";
            jaxOpsArea.Placemark.Snippet = "The operational area";
            jaxOpsArea.Placemark.Snippet.maxLines = 1;
            folder.Add(jaxOpsArea.Placemark);

#if true
            var timeStep = 0;
            foreach (var state in behavior.PlatformStates)
            {
                if (timeStep % 100 == 0)
                {
                    state.PlatformLocation.Location.Placemark.name = string.Format("TimeStep {0}", timeStep);
                    folder.Add(state.PlatformLocation.Location.Placemark);
                }
                timeStep++;
            }
#else
            result.Placemark.name = "Platform track";
            result.Placemark.Snippet = "The track of the platform";
            result.Placemark.Snippet.maxLines = 1;
            result.Placemark.Geometry.AltitudeMode = AltitudeMode.clampedToGround;
            folder.Add(result.Placemark);
#endif

            kml.Document.Add(folder);

            var savePath = Path.Combine(System.Environment.GetFolderPath(System.Environment.SpecialFolder.MyDocuments), "Platform Behavior Tests", "PlatformBehavior.kml");
            Debug.WriteLine("Saving KML...");
            kml.Save(savePath);
#endif
        }
        public void PerimeterBounceToKML()
        {
            var jaxOpsArea = new GeoArray(
                new Geo(29.3590, -79.2195),
                new Geo(31.1627, -79.2195),
                new Geo(31.1627, -81.2789),
                new Geo(30.1627, -81.2789),
                new Geo(29.3590, -80.8789),
                new Geo(29.3590, -79.2195));

            var kml = new KMLRoot();
            var folder = new Folder("Jacksonville");
            jaxOpsArea.Placemark.name = "Jacksonville OpArea";
            jaxOpsArea.Placemark.Snippet = "The operational area";
            jaxOpsArea.Placemark.Snippet.maxLines = 1;
            folder.Add(jaxOpsArea.Placemark);

            GeoArray result = null;
            while (result == null)
            {
                try
                {
                    result = jaxOpsArea.PerimeterBounce(null, double.NaN, 1e8);
                }
                catch (PerimeterBounceException ex)
                {
                    Debug.WriteLine(ex.Message);
                    Debug.WriteLine("PerimeterBounce failed, retrying...");
                }
            }
            var startLocation = result[0];
            startLocation.Placemark.name = "Start location";
            startLocation.Placemark.Snippet = "The start of the track";
            startLocation.Placemark.Snippet.maxLines = 1;
            startLocation.Placemark.AddStyle(new IconStyle(System.Drawing.Color.Green) { Icon = new Icon() { href = @"http://www.clker.com/cliparts/q/y/S/n/A/V/green-pin-th.png" } });
            folder.Add(startLocation.Placemark);

            result.Placemark.name = "Platform track";
            result.Placemark.Snippet = "The track of the platform";
            result.Placemark.Snippet.maxLines = 1;
            result.Placemark.Geometry.AltitudeMode = AltitudeMode.clampedToGround;
            folder.Add(result.Placemark);

#if false
            var endPoint = result.Segments.Last()[1];
            if (!jaxOpsArea.Contains(endPoint))
            {
                var goodBounceSegment = result.Segments.ToArray()[result.Segments.Count() - 2];
                var goodBouncePoint = goodBounceSegment[0];
                var goodBounce = goodBouncePoint.Placemark;
                Debug.WriteLine("Test failed"); 
                goodBounce.name = string.Format("Last Good Bounce {0:000}", result.Segments.Count() - 1);
                Debug.WriteLine(goodBounce.name);
                goodBounce.Snippet = string.Format("Lat: {0:0.#####} Lon: {1:0.#####}", goodBouncePoint.Latitude, goodBouncePoint.Longitude);
                goodBounce.Snippet.maxLines = 1;
                folder.Add(goodBounce);

                goodBounceSegment.Placemark.name = "Last good bounce segment";
                goodBounceSegment.Placemark.AddStyle(new LineStyle(System.Drawing.Color.Red, 5));
                folder.Add(goodBounceSegment.Placemark);

                var badBouncePoint = goodBounceSegment[1];
                var badBounce = badBouncePoint.Placemark;
                badBounce.name = string.Format("Bad Bounce {0:000}", result.Segments.Count());
                badBounce.Snippet = string.Format("Lat: {0:0.#####} Lon: {1:0.#####}", badBouncePoint.Latitude, badBouncePoint.Longitude);
                badBounce.Snippet.maxLines = 1;
                folder.Add(badBounce);
            }
            else Debug.WriteLine("Test passed");
            var segments = result.Segments.ToArray();
            for (var segmentIndex = 0; segmentIndex < segments.Length; segmentIndex++)
            {
                var bounce = segments[segmentIndex][1].Placemark;
                bounce.name = string.Format("Bounce {0:000}", segmentIndex + 1);
                bounce.Snippet = string.Format("Lat: {0:0.#####} Lon: {1:0.#####}", segments[segmentIndex][1].Latitude, segments[segmentIndex][1].Longitude);
                bounce.Snippet.maxLines = 1;
                folder.Add(bounce);
            }
#endif

            var endLocation = result[result.Length - 1];
            endLocation.Placemark.name = "End location";
            endLocation.Placemark.Snippet = "The end of the track";
            endLocation.Placemark.Snippet.maxLines = 1;
            endLocation.Placemark.AddStyle(new IconStyle(System.Drawing.Color.Red) { Icon = new Icon { href = @"http://www.clker.com/cliparts/Z/x/U/0/B/3/red-pin-th.png" } });
            folder.Add(endLocation.Placemark);

            kml.Document.Add(folder);

            var savePath = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments), "Perimeter Bounce Tests", "PerimeterBounce.kml");
            Debug.WriteLine("Saving KML...");
            kml.Save(savePath);
        }