internal static ISCSIPDU GetSCSIDataOutResponsePDU(SCSIDataOutPDU request, ISCSITarget target, SessionParameters session, ConnectionParameters connection)
{
string connectionIdentifier = StateObject.GetConnectionIdentifier(session, connection);
TransferEntry transfer = connection.GetTransferEntry(request.TargetTransferTag);
if (transfer == null)
{
ISCSIServer.Log("[{0}][GetSCSIDataOutResponsePDU] Invalid TargetTransferTag {1}", connectionIdentifier, request.TargetTransferTag);
RejectPDU reject = new RejectPDU();
reject.InitiatorTaskTag = request.InitiatorTaskTag;
reject.Reason = RejectReason.InvalidPDUField;
reject.Data = ByteReader.ReadBytes(request.GetBytes(), 0, 48);
return(reject);
}
ushort LUN = (ushort)request.LUN;
Disk disk = target.Disks[LUN];
uint offset = request.BufferOffset;
uint totalLength = (uint)transfer.CommandDataBuffer.Length;
// Store segment (we only execute the command after receiving all of its data)
Array.Copy(request.Data, 0, transfer.CommandDataBuffer, offset, request.DataSegmentLength);
ISCSIServer.Log(String.Format("[{0}][GetSCSIDataOutResponsePDU] Buffer offset: {1}, Total length: {2}", connectionIdentifier, offset, totalLength));
if (offset + request.DataSegmentLength == totalLength)
{
// Last Data-out PDU
ISCSIServer.Log("[{0}][GetSCSIDataOutResponsePDU] Last Data-out PDU", connectionIdentifier);
byte[] scsiResponse;
SCSIStatusCodeName status = target.ExecuteCommand(transfer.CommandBytes, request.LUN, transfer.CommandDataBuffer, out scsiResponse);
SCSIResponsePDU response = new SCSIResponsePDU();
response.InitiatorTaskTag = request.InitiatorTaskTag;
response.Status = status;
response.Data = scsiResponse;
connection.RemoveTransfer(request.TargetTransferTag);
return(response);
}
else
{
// Send R2T
ReadyToTransferPDU response = new ReadyToTransferPDU();
response.InitiatorTaskTag = request.InitiatorTaskTag;
response.TargetTransferTag = request.TargetTransferTag;
response.R2TSN = transfer.NextR2NSN;
response.BufferOffset = offset + request.DataSegmentLength; // where we left off
response.DesiredDataTransferLength = Math.Min((uint)connection.TargetMaxRecvDataSegmentLength, totalLength - response.BufferOffset);
transfer.NextR2NSN++;
return(response);
}
}
public void AddTarget(ISCSITarget target)
{
lock (Lock)
{
int index = IndexOfTarget(target.TargetName);
if (index >= 0)
{
throw new ArgumentException("A target with the same iSCSI Target Name already exists");
}
m_targets.Add(target);
}
}
public void RemoveSession(ISCSISession session, SessionTerminationReason reason)
{
lock (m_activeSessions)
{
int index = GetSessionIndex(session.InitiatorName, session.ISID, session.TSIH);
if (index >= 0)
{
ISCSITarget target = m_activeSessions[index].Target;
if (target != null)
{
target.NotifySessionTermination(session.InitiatorName, session.ISID, reason);
}
m_activeSessions.RemoveAt(index);
}
}
}
private LoginResponseStatusName SetUpNormalSession(LoginRequestPDU request, string targetName, ConnectionParameters connection)
{
ISCSISession session = connection.Session;
session.IsDiscovery = false;
// If there's an existing session between this initiator and the target, we should terminate the
// old session before reinstating a new iSCSI session in its place.
ISCSISession existingSession = m_sessionManager.FindSession(session.InitiatorName, request.ISID, targetName);
if (existingSession != null)
{
Log(Severity.Verbose, "[{0}] Terminating old session with target: {1}", connection.ConnectionIdentifier, targetName);
List <ConnectionState> existingConnections = m_connectionManager.GetSessionConnections(existingSession);
foreach (ConnectionState existingConnection in existingConnections)
{
m_connectionManager.ReleaseConnection(existingConnection);
}
m_sessionManager.RemoveSession(existingSession, SessionTerminationReason.ImplicitLogout);
}
// We use m_targets.Lock to synchronize between the login logic and the target removal logic.
lock (m_targets.Lock)
{
ISCSITarget target = m_targets.FindTarget(targetName);
if (target != null)
{
if (!target.AuthorizeInitiator(session.InitiatorName, session.ISID, connection.InitiatorEndPoint))
{
Log(Severity.Warning, "[{0}] Initiator was not authorized to access {1}", connection.ConnectionIdentifier, targetName);
return(LoginResponseStatusName.AuthorizationFailure);
}
session.Target = target;
}
else
{
Log(Severity.Warning, "[{0}] Initiator requested an unknown target: {1}", connection.ConnectionIdentifier, targetName);
return(LoginResponseStatusName.NotFound);
}
}
return(LoginResponseStatusName.Success);
}
public void AddTarget(ISCSITarget target)
{
m_targets.AddTarget(target);
}
internal static List <ISCSIPDU> GetSCSIResponsePDU(SCSICommandPDU command, ISCSITarget target, SessionParameters session, ConnectionParameters connection)
{
// We return either SCSIResponsePDU or List<SCSIDataInPDU>
List <ISCSIPDU> responseList = new List <ISCSIPDU>();
string connectionIdentifier = StateObject.GetConnectionIdentifier(session, connection);
if (command.Write && command.DataSegmentLength < command.ExpectedDataTransferLength)
{
uint transferTag = session.GetNextTransferTag();
// Store segment (we only execute the command after receiving all of its data)
byte[] commandDataBuffer = new byte[command.ExpectedDataTransferLength];
Array.Copy(command.Data, 0, commandDataBuffer, 0, command.DataSegmentLength);
// Send R2T
ReadyToTransferPDU response = new ReadyToTransferPDU();
response.InitiatorTaskTag = command.InitiatorTaskTag;
response.R2TSN = 0; // R2Ts are sequenced per command and must start with 0 for each new command;
response.TargetTransferTag = transferTag;
response.BufferOffset = command.DataSegmentLength;
response.DesiredDataTransferLength = Math.Min((uint)connection.TargetMaxRecvDataSegmentLength, command.ExpectedDataTransferLength - response.BufferOffset);
connection.AddTransfer(transferTag, command.CommandDescriptorBlock, commandDataBuffer, 1);
responseList.Add(response);
return(responseList);
}
byte[] scsiResponse;
SCSIStatusCodeName status = target.ExecuteCommand(command.CommandDescriptorBlock, command.LUN, command.Data, out scsiResponse);
if (!command.Read || status != SCSIStatusCodeName.Good)
{
// RFC 3720: if the command is completed with an error, then the response and sense data MUST be sent in a SCSI Response PDU
SCSIResponsePDU response = new SCSIResponsePDU();
response.InitiatorTaskTag = command.InitiatorTaskTag;
response.Status = status;
response.Data = scsiResponse;
if (command.Read)
{
EnforceExpectedDataTransferLength(response, command.ExpectedDataTransferLength);
}
responseList.Add(response);
}
else if (scsiResponse.Length <= connection.InitiatorMaxRecvDataSegmentLength)
{
SCSIDataInPDU response = new SCSIDataInPDU();
response.InitiatorTaskTag = command.InitiatorTaskTag;
response.Status = status;
response.StatusPresent = true;
response.Final = true;
response.Data = scsiResponse;
EnforceExpectedDataTransferLength(response, command.ExpectedDataTransferLength);
responseList.Add(response);
}
else // we have to split the response to multiple Data-In PDUs
{
int bytesLeftToSend = scsiResponse.Length;
uint dataSN = 0;
while (bytesLeftToSend > 0)
{
int dataSegmentLength = Math.Min(connection.InitiatorMaxRecvDataSegmentLength, bytesLeftToSend);
int dataOffset = scsiResponse.Length - bytesLeftToSend;
SCSIDataInPDU response = new SCSIDataInPDU();
response.InitiatorTaskTag = command.InitiatorTaskTag;
if (bytesLeftToSend == dataSegmentLength)
{
// last Data-In PDU
response.Status = status;
response.StatusPresent = true;
response.Final = true;
}
response.BufferOffset = (uint)dataOffset;
response.DataSN = dataSN;
dataSN++;
response.Data = new byte[dataSegmentLength];
Array.Copy(scsiResponse, dataOffset, response.Data, 0, dataSegmentLength);
responseList.Add(response);
bytesLeftToSend -= dataSegmentLength;
}
}
return(responseList);
}
internal static LoginResponsePDU GetLoginResponsePDU(LoginRequestPDU request, List <ISCSITarget> availableTargets, SessionParameters session, ConnectionParameters connection, ref ISCSITarget target, GetNextTSIH GetNextTSIH)
{
LoginResponsePDU response = new LoginResponsePDU();
response.Transit = request.Transit;
response.Continue = false;
// The stage codes are:
// 0 - SecurityNegotiation
// 1 - LoginOperationalNegotiation
// 3 - FullFeaturePhase
response.CurrentStage = request.CurrentStage;
response.NextStage = request.NextStage;
response.VersionMax = request.VersionMax;
response.VersionActive = request.VersionMin;
response.ISID = request.ISID;
response.Status = LoginResponseStatusName.Success;
response.InitiatorTaskTag = request.InitiatorTaskTag;
if (request.TSIH == 0)
{
// For a new session, the request TSIH is zero,
// As part of the response, the target generates a TSIH.
session.TSIH = GetNextTSIH();
}
response.TSIH = session.TSIH;
if (request.Transit && request.Continue)
{
response.Status = LoginResponseStatusName.InitiatorError;
return(response);
}
else if (request.Continue)
{
response.Status = LoginResponseStatusName.Success;
return(response);
}
// RFC 3720: The login process proceeds in two stages - the security negotiation
// stage and the operational parameter negotiation stage. Both stages are optional
// but at least one of them has to be present.
bool firstLoginRequest = (!session.IsDiscovery && target == null);
if (firstLoginRequest)
{
string sessionType = request.LoginParameters.ValueOf("SessionType");
if (sessionType == "Discovery")
{
session.IsDiscovery = true;
}
else //sessionType == "Normal" or unspecified (default is Normal)
{
session.IsDiscovery = false;
// RFC 3720: For any connection within a session whose type is not "Discovery", the first Login Request MUST also include the TargetName key=value pair.
if (request.LoginParameters.ContainsKey("TargetName"))
{
string targetName = request.LoginParameters.ValueOf("TargetName");
int targetIndex = GetTargetIndex(availableTargets, targetName);
if (targetIndex >= 0)
{
target = availableTargets[targetIndex];
}
else
{
response.Status = LoginResponseStatusName.NotFound;
return(response);
}
}
else
{
response.Status = LoginResponseStatusName.InitiatorError;
return(response);
}
}
}
if (request.CurrentStage == 0)
{
response.LoginParameters.Add("AuthMethod", "None");
if (request.Transit)
{
if (request.NextStage == 3)
{
session.IsFullFeaturePhase = true;
}
else if (request.NextStage != 1)
{
response.Status = LoginResponseStatusName.InitiatorError;
}
}
}
else if (request.CurrentStage == 1)
{
UpdateOperationalParameters(request.LoginParameters, session, connection);
response.LoginParameters = GetLoginOperationalParameters(session, connection);
if (request.Transit)
{
if (request.NextStage == 3)
{
session.IsFullFeaturePhase = true;
}
else
{
response.Status = LoginResponseStatusName.InitiatorError;
}
}
}
else
{
// Not valid
response.Status = LoginResponseStatusName.InitiatorError;
}
return(response);
}