public void Save(object part_unit, object part_owner, string station, string key)
{
//Insert ProductInfo InfoType='VGA'
if (part_unit == null)
{
throw new ArgumentNullException();
}
if (part_owner == null)
{
throw new ArgumentNullException();
}
var product = (Product)part_owner;
Session session = SessionManager.GetInstance.GetSession(product.ProId, Session.SessionType.Product);
if (session == null)
{
throw new InstanceNotFoundException("Can not get Session instance from SessionManager!");
}
//var product_info = new ProductInfo();
//product_info.InfoType = "VGA";
//product.ProductInfoes.Add(product_info);
product.SetExtendedProperty("VGA", ((PartUnit)part_unit).Sn.Trim(), session.Editor);
IProductRepository product_repository = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
product_repository.Update(product, session.UnitOfWork);
var mb_repository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
IMB mb = mb_repository.Find(((PartUnit)part_unit).Sn.Trim());
if (mb != null)
{
//PCA..PCBStatus.Station = 32
mb.MBStatus.Station = "32";
mb.MBStatus.Status = MBStatusEnum.Pass;
//记录MB Log Insert PCA..PCBLog WC=３２
MBLog mb_log = new MBLog(0, mb.Sn, mb.Model, "32", (int) MBStatusEnum.Pass, session.Line, session.Editor,new DateTime());
mb.AddLog(mb_log);
mb_repository.Update(mb, session.UnitOfWork);
//IProductRepository product_repository = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
product_repository.Update(product, session.UnitOfWork);
// if (product.IsCDSI)
// {
// SpecialDetInfo item = new SpecialDetInfo{snoId = product.ProId,tp = "CDSI",sno1 = product.MAC,cdt = new DateTime(),id = 0,udt = new DateTime()};
// product_repository.InsertSpecialDet(item);
// }
}
}
/// <summary>
/// 扫描9999，结束工作流
/// 如果没有Defect，即defectCodeList为null或cout为0
/// 将Session.AddValue(Session.SessionKeys.HasDefect,false)
/// 否则Session.AddValue(Session.SessionKeys.HasDefect,true)
/// </summary>
/// <param name="mbsno">mbsno</param>
/// <param name="defectCodeList">defectCodeList</param>
public string save(string LotNo, String strCMD, string editor, string line, string customer)
{
logger.Debug("(PCAOQCInputImpl)save start,"
+ " LotNo: " + LotNo
+ " KeyCode:" + strCMD);
FisException ex;
List<string> erpara = new List<string>();
IMBRepository iMBRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
string returnstring = "OK";
try
{
if (strCMD == "LOCK") //Update Lot.Status=3
{
LotInfo setLotInfo = new LotInfo();
LotInfo conLotInfo = new LotInfo();
conLotInfo.lotNo = LotNo;
setLotInfo.status = "3";
setLotInfo.editor = editor;
setLotInfo.udt = DateTime.Now;
iMBRepository.UpdateLotInfo(setLotInfo, conLotInfo);
}
else if (strCMD == "UNLOCK") //Update Lot.Status=2
{
LotInfo setLotInfo = new LotInfo();
LotInfo conLotInfo = new LotInfo();
conLotInfo.lotNo = LotNo;
setLotInfo.status = "2";
setLotInfo.editor = editor;
setLotInfo.udt = DateTime.Now;
iMBRepository.UpdateLotInfo(setLotInfo, conLotInfo);
}
else if (strCMD == "UNDO")
{
UnitOfWork uow = new UnitOfWork();
// Update Lot.Status=4
LotInfo setLotInfo = new LotInfo();
LotInfo conLotInfo = new LotInfo();
conLotInfo.lotNo = LotNo;
setLotInfo.status = "4";
setLotInfo.editor = editor;
setLotInfo.udt = DateTime.Now;
iMBRepository.UpdateLotInfoDefered(uow,setLotInfo, conLotInfo);
//Update PCBStatus where PCBNo in PCBLot.PCBNo and PCBLot.Status=1 and LotNo=#LotNo Station=10 Status=1
PcblotInfo conupPcblot = new PcblotInfo();
conupPcblot.lotNo= LotNo;
conupPcblot.status = "1";
IList<PcblotInfo> upPcblotLst = new List<PcblotInfo>();
upPcblotLst = iMBRepository.GetPcblotInfoList(conupPcblot);
if ((upPcblotLst == null) || (upPcblotLst.Count == 0))
{
}
else
{
for (int i = 0; i < upPcblotLst.Count; i++)
{
IMB mb = iMBRepository.Find(upPcblotLst[i].pcbno);
if (mb != null)
{
mb.MBStatus.Station = "10";
mb.MBStatus.Status = MBStatusEnum.Pass;
mb.MBStatus.Editor = editor;
mb.MBStatus.Udt = DateTime.Now;
//记录MB Log Insert PCBLog Station=’31A’ Status=’0’ PdLine=‘UNDO
MBLog mb_log = new MBLog(0, mb.Sn, mb.Model, "31A", (int)MBStatusEnum.Fail, "UNDO", editor, new DateTime());
mb.AddLog(mb_log);
iMBRepository.Update(mb, uow);
}
}
}
// Update PCBLot.Status=0
PcblotInfo conPcblot = new PcblotInfo();
PcblotInfo setPcblot = new PcblotInfo();
conPcblot.lotNo = LotNo;
setPcblot.status = "0";
iMBRepository.UpdatePCBLotInfoDefered(uow, setPcblot, conPcblot);
uow.Commit();
}
else if (strCMD == "PASS")
{
// 若当前Lot.Status=’3’，则报错：“该Lot已锁定，请解锁后再做放行”
LotInfo conLotInfo = new LotInfo();
conLotInfo.lotNo = LotNo;
IList<LotInfo> getLotInfo = iMBRepository.GetlotInfoList(conLotInfo);
if (getLotInfo[0].status == "3")
{
erpara.Add(LotNo);
ex = new FisException("CHK319", erpara); //该Lot已锁定，请解锁后再做放行！
throw ex;
}
// 获取LotSetting.FailQty(先用PdLine检索，若不存在，再用’ALL’检索，若不存在，则报错：“请IE维护LotSetting”)
LotSettingInfo conlotSetting = new LotSettingInfo();
int failQtyforLine = 0;
conlotSetting.line = getLotInfo[0].line;
conlotSetting.type = getLotInfo[0].type;
IList<LotSettingInfo> LotSettinglst = iMBRepository.GetLotSettingInfoList(conlotSetting);
if ((LotSettinglst == null) || (LotSettinglst.Count == 0))
{
conlotSetting = new LotSettingInfo();
conlotSetting.line = "ALL";
conlotSetting.type = getLotInfo[0].type;
LotSettinglst = iMBRepository.GetLotSettingInfoList(conlotSetting);
if ((LotSettinglst == null) || (LotSettinglst.Count == 0))
{
//报错：“请与IE联系，维护 Lot 相关设置”
List<string> errpara = new List<string>();
errpara.Add(LotNo);
ex = new FisException("CHK278", errpara);
throw ex;
}
else
{
failQtyforLine = LotSettinglst[0].failQty;
}
}
else
{
failQtyforLine = LotSettinglst[0].failQty;
}
// 获取当前Lot的PCBLot.Status=0的数量@CNT，
//若@CNT大于或者等于LotSetting.FailQty，则Update Lot.Status=3，并提示：“该Lot抽检失败的数量过多，已被锁定”；
PcblotInfo conpassPcblot = new PcblotInfo();
conpassPcblot.lotNo = LotNo;
conpassPcblot.status = "0";
IList<PcblotInfo> passPcblotLst = new List<PcblotInfo>();
int pcbfailCount = 0;
passPcblotLst = iMBRepository.GetPcblotInfoList(conpassPcblot);
if ((passPcblotLst == null) || (passPcblotLst.Count == 0))
{
pcbfailCount = 0;
}
else
{
pcbfailCount = passPcblotLst.Count;
}
//int pcbfailCount = passPcblotLst.Count;
if (pcbfailCount >= failQtyforLine)
{
LotInfo setfailLotInfo = new LotInfo();
LotInfo confailLotInfo = new LotInfo();
confailLotInfo.lotNo = LotNo;
setfailLotInfo.status = "3";
setfailLotInfo.editor = editor;
setfailLotInfo.udt = DateTime.Now;
iMBRepository.UpdateLotInfo(setfailLotInfo, confailLotInfo);
List<string> errpara = new List<string>();
errpara.Add(LotNo);
ex = new FisException("CHK318", errpara);//该Lot抽检失败的数量过多，已被锁定
throw ex;
}
else
{
//Update Lot.Status=9；
UnitOfWork uof = new UnitOfWork();
LotInfo setfailLotInfo = new LotInfo();
LotInfo confailLotInfo = new LotInfo();
confailLotInfo.lotNo = LotNo;
setfailLotInfo.status = "9";
setfailLotInfo.editor = editor;
setfailLotInfo.udt = DateTime.Now;
iMBRepository.UpdateLotInfoDefered(uof,setfailLotInfo, confailLotInfo);
// Update PCBStatus where PCBNo in PCBLot.PCBNo and PCBLot.Status=1 (Station=31 and Status=1)；
// Insert PCBLog (Station=31 and Status=1)
//UpdatePCBStatus(PCBStatusInfo setValue, PCBStatusInfo condition)
PcblotInfo conupPcblot = new PcblotInfo();
conupPcblot.lotNo = LotNo;
conupPcblot.status = "1";
IList<PcblotInfo> upPcblotLst = new List<PcblotInfo>();
upPcblotLst = iMBRepository.GetPcblotInfoList(conupPcblot);
if ((upPcblotLst == null) || (upPcblotLst.Count == 0))
{
}
else
{
for (int i = 0; i < upPcblotLst.Count; i++)
{
IMB mb = iMBRepository.Find(upPcblotLst[i].pcbno);
if (mb != null)
{
//UC Update
//Update PCBStatus where PCBNo in PCBLot.PCBNo and PCBLot.Status=1 and
//Station=31A and Status=1【2012-6-20】 (Station=31 and Status=1)；
if ((mb.MBStatus.Station == "31A") && (mb.MBStatus.Status == MBStatusEnum.Pass))
{
mb.MBStatus.Station = "31";
mb.MBStatus.Status = MBStatusEnum.Pass;
mb.MBStatus.Editor = editor;
mb.MBStatus.Udt = DateTime.Now;
//记录MB Log Insert PCBLog (Station=31 and Status=1)
MBLog mb_log = new MBLog(0, mb.Sn, mb.Model, "31", (int)MBStatusEnum.Pass, line, editor, new DateTime());
mb.AddLog(mb_log);
iMBRepository.Update(mb, uof);
}
}
}
}
uof.Commit();
}
}
return returnstring;
}
catch (FisException e)
{
logger.Error(e.mErrmsg);
throw e;
}
catch (Exception e)
{
logger.Error(e.Message);
throw e;
}
finally
{
logger.Debug("(PCAOQCInputImpl)save end,"
+ " LotNo: " + LotNo
+ " KeyCode:" + strCMD);
}
}
/// <summary>
/// 添加日志。
/// </summary>
/// <param name="log">日志对象</param>
public void AddLog(MBLog log)
{
if (log == null)
return;
lock (_syncObj_logs)
{
if (this._logs == null)
{
this._logs = new List<MBLog>();
}
object naught = this.MBLogs;
if (this._logs.Contains(log))
return;
log.Tracker = this._tracker.Merge(log.Tracker);
this._logs.Add(log);
this._tracker.MarkAsAdded(log);
this._tracker.MarkAsModified(this);
}
}
/// <summary>
/// Save MB for RCTO MB Change
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
MB currentMB = CurrentSession.GetValue(Session.SessionKeys.MB) as MB;
string currentNewMBSno = CurrentSession.GetValue(Session.SessionKeys.MBSN) as string;
//2012-9-7, Jessica Liu
string oldMBSno = currentMB.Sn;
if (currentMB == null)
{
throw new NullReferenceException("MB in session is null");
}
bool isMatch = false;
PCBStatusInfo tempPCBStatusInfo = new PCBStatusInfo();
PCBStatusInfo tempCond = new PCBStatusInfo();
IMBRepository CurrentRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
IList<MBLog> MBLogList = CurrentRepository.GetMBLog(currentMB.Sn, "1A", 1);
if (MBLogList != null && MBLogList.Count > 0)
{
IList<Repair> tempRepairLst = CurrentRepository.GetPcbRepairList(currentMB.Sn, "15");
if (tempRepairLst != null && tempRepairLst.Count > 0)
{
isMatch = false;
}
else
{
isMatch = true;
/* 2012-9-7, Jessica Liu, UC变更：Save时，满足条件I不再进行Station=10的设置
//update PCBStatus(PCBNo=@NewMBSN, Station=10, Editor, Udt; Condition: PCBNo=@MBSN)
tempPCBStatusInfo.station = "10";
*/
}
IList<TestLog> lstalltestlog = CurrentRepository.GetPCBTestLogListFromPCBTestLogByType(currentMB.Sn, 1, "M/B");
if (lstalltestlog != null && lstalltestlog.Count > 0)
{
isMatch = true;
}
else
{
isMatch = true;
//update PCBStatus(PCBNo=@NewMBSN, Station=10, Editor, Udt; Condition: PCBNo=@MBSN)
tempPCBStatusInfo.station = "10";
}
}
else
{
if (currentMB.MBStatus.Station == "10" || currentMB.MBStatus.Station == "15" || currentMB.MBStatus.Station == "31")
{
isMatch = true;
//update PCBStatus(PCBNo=@NewMBSN, Station=10, Editor, Udt; Condition: PCBNo=@MBSN)
tempPCBStatusInfo.station = "10";
}
}
if (isMatch)
{
//update PCB（PCBNo=@NewMBSN, Udt; Codition: PCBNo=@MBSN）
PcbEntityInfo tempPcbInfo = new PcbEntityInfo();
tempPcbInfo.pcbno = currentNewMBSno;
PcbEntityInfo cond = new PcbEntityInfo();
cond.pcbno = currentMB.Sn;
CurrentRepository.UpdatePcb(tempPcbInfo, cond);
//update PCBInfo(PCBNo=@NewMBSN, Editor, Udt; Condition: PCBNo=@MBSN)
IMES.FisObject.PCA.MB.MBInfo tempMBInfo = new IMES.FisObject.PCA.MB.MBInfo();
tempMBInfo.PCBID = currentNewMBSno;
tempMBInfo.Editor = this.Editor;
tempMBInfo.Udt = DateTime.Now;
IMES.FisObject.PCA.MB.MBInfo MBCond = new IMES.FisObject.PCA.MB.MBInfo();
MBCond.PCBID = currentMB.Sn;
CurrentRepository.UpdatePcbInfo(tempMBInfo, MBCond);
//update PCBStatus(PCBNo=@NewMBSN, Station=10, Editor, Udt; Condition: PCBNo=@MBSN)
//或update PCBStatus(PCBNo=@NewMBSN, Editor, Udt; Condition: PCBNo=@MBSN)
tempPCBStatusInfo.pcbno = currentNewMBSno;
tempPCBStatusInfo.editor = this.Editor;
tempPCBStatusInfo.udt = DateTime.Now;
tempCond.pcbno = currentMB.Sn;
CurrentRepository.UpdatePCBStatus(tempPCBStatusInfo, tempCond);
//Insert PCBInfo （PCBNo=@NewMBSN；InfoType=’RCTOChange’；InfoValue=@MBSN）
IMES.FisObject.PCA.MB.MBInfo mbctInfo = new IMES.FisObject.PCA.MB.MBInfo(
0,
currentNewMBSno,
"RCTOChange",
currentMB.Sn,
this.Editor,
DateTime.Now,
DateTime.Now);
//2012-9-7, Jessica Liu
//currentMB.AddMBInfo(mbctInfo);
CurrentRepository.AddMBInfoesDefered(CurrentSession.UnitOfWork, new IMES.FisObject.PCA.MB.MBInfo[] { mbctInfo });
//Insert PCBLog（PCBNo=@NewMBSN; Station=PCBStatus.Station; Line=[Select Line]; Status=1）
//line = string.IsNullOrEmpty(this.Line) ? currentMB.MBStatus.Line : this.Line;
//ITC-1428-0027, Jessica Liu, 2012-9-12
string currentStation = "";
if (string.IsNullOrEmpty(tempPCBStatusInfo.station))
{
currentStation = currentMB.MBStatus.Station;
}
else
{
currentStation = tempPCBStatusInfo.station;
}
var mbLog = new MBLog(
0,
currentNewMBSno,
currentMB.Model,
//ITC-1428-0027, Jessica Liu, 2012-9-12
//currentMB.MBStatus.Station,
currentStation,
1,
this.Line, //line,
this.Editor,
DateTime.Now);
//2012-9-7, Jessica Liu
//currentMB.AddLog(mbLog);
CurrentRepository.AddMBLogsDefered(CurrentSession.UnitOfWork, new MBLog[] { mbLog });
CurrentRepository.Update(currentMB, CurrentSession.UnitOfWork);
}
else
{
throw new FisException("CHK944", new string[] { }); //流程错误，请确定MB的状态!
}
//2012-9-7, Jessica Liu
CurrentSession.AddValue(Session.SessionKeys.PrintLogName, "RCTO MB Label");
CurrentSession.AddValue(Session.SessionKeys.PrintLogBegNo, currentNewMBSno);
CurrentSession.AddValue(Session.SessionKeys.PrintLogEndNo, currentNewMBSno);
CurrentSession.AddValue(Session.SessionKeys.PrintLogDescr, oldMBSno);
return base.DoExecute(executionContext);
}
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
try
{
IRepairTarget repairTarget = GetRepairTarget();
RepairDefect defect;
defect = (RepairDefect)CurrentSession.GetValue(Session.SessionKeys.CurrentRepairdefect);
IPartRepository partRep = RepositoryFactory.GetInstance().GetRepository<IPartRepository, IPart>();
IProductRepository productRep = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
IProduct product = (IProduct)CurrentSession.GetValue(Session.SessionKeys.Product);
//bool bSearch = false;
bool bLCMType = false;
//IList<IProductPart> productParts = product.ProductParts;
IList<IProductPart> productParts = (IList<IProductPart>)CurrentSession.GetValue(ExtendSession.SessionKeys.ProductPart);
bool isReleaseMB = (bool)CurrentSession.GetValue(ExtendSession.SessionKeys.ReleaseMB);
bool isReleasePart = (bool)CurrentSession.GetValue(ExtendSession.SessionKeys.ReleasePart);
CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, "");
if (isReleaseMB) //MB
{
CurrentSession.AddValue(Session.SessionKeys.OldMB, product.PCBID);
product.PCBID = "";
defect.PartType = "MB";
product.PCBModel = null;
product.MAC = null;
product.UUID = null;
product.MBECR = null;
product.CVSN = null;
//解綁MB要同時解綁 BATT
//20110615 只要有换MB/LCM/Battery三者中任意一个，都需要把机器原来结合的MB/LCM/Battery解掉，然后重BoardInput(40)站重流
foreach (ProductPart part in productParts)
{
//if (part.Value.Trim() == defect.OldPartSno.Trim())
// {
//CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, part.PartType);
/*if (part.PartType.Trim() == "BATT")
{
product.RemovePart(part.Value, part.PartID);
break;
}*/
//}
product.RemovePart(part.Value, part.PartID); // Dean 20110715 解綁MB要同時解綁 BATT/LCM1/LCM2
}
CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, "MB");
}
else if (isReleasePart)
{
// Dean 20110715 解綁LCM1/LCM2/BATT 要同時解綁MB，並且還是更新PCBStatus=30
var mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
var mb = mbRepository.Find(product.PCBID);
if (mb == null)
{
var ex = new FisException("SFC001", new string[] { mb.Sn });
throw ex;
}
var PCBStatus = new MBStatus(mb.Sn, "30", MBStatusEnum.Pass, this.Editor, mb.MBStatus.Line, mb.MBStatus.Cdt, DateTime.Now);
mb.MBStatus = PCBStatus;
mbRepository.Update(mb, CurrentSession.UnitOfWork);
var mbLog = new MBLog(
0,
mb.Sn,
mb.Model,
"30",
1,
mb.MBStatus.Line,
this.Editor,
DateTime.Now);
mb.AddLog(mbLog);
mbRepository.Update(mb, CurrentSession.UnitOfWork);
product.PCBID = "";
product.PCBModel = null;
product.MAC = null;
product.UUID = null;
product.MBECR = null;
product.CVSN = null;
foreach (ProductPart part in productParts)
{
if (part.Value.Trim() == defect.OldPartSno.Trim())
{
CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, part.PartType);
//if (part.PartType != "MB" && part.PartType != "")
/*if (part.PartType.Trim() == "LCM1" || part.PartType.Trim() == "LCM2")
{
bLCMType = true;
}
else if (part.PartType.Trim() == "BATT")//先解到BATT本身的
{
product.RemovePart(part.Value, part.PartID);
}
break;*/
foreach (ProductPart part1 in productParts)
{
product.RemovePart(part1.Value, part1.PartID);// Dean 20110715 解綁LCM1/LCM2要同時解綁 BATT/LCM1/LCM2
}
break;
}
}
//remove LCM1 & LCM2
/*if (bLCMType)
{
foreach (ProductPart part in productParts)
{
//if (part.PartType === "LCM1" || part.PartType == "LCM2")//若是LCM1/LCM2/BATT，要同時解綁
//解綁LCM1或LCM2要同時解綁LCM1/LCM2/BATT(若是LCM1/LCM2/BATT，要同時解綁)
if (part.PartType.Trim() != "MB" && part.PartType != "")
{
product.RemovePart(part.Value, part.PartID);
}
}
}*/
}
#region original 20110527
//if (defect.OldPartSno.Trim() != "") //MB/LCM1/LCM2
//{
// //MB
// if (defect.OldPart.Trim() != "" && product.PCBModel.Trim() == defect.OldPart.Trim() ||
// defect.OldPartSno.Trim() != "" && product.PCBID.Trim() == defect.OldPartSno.Trim())
// {
// //Dean 20110516 即當Faulty Part NO ,Faulty Part Sn 和Product_Part中的數據不匹配
// if (defect.OldPart.Trim() != "" && defect.OldPartSno.Trim() != "")
// {
// if (product.PCBModel == defect.OldPart.Trim() &&
// product.PCBID.Trim() == defect.OldPartSno.Trim())
// {
// CurrentSession.AddValue(Session.SessionKeys.OldMB, product.PCBID);
// product.PCBID = "";
// defect.PartType = "MB";
// product.PCBModel = null;
// product.MAC = null;
// product.UUID = null;
// product.MBECR = null;
// product.CVSN = null;
// CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, "MB");
// //bSearch = true;
// }
// else//兩個都有欄，但不匹配的ErrorMessage
// {
// List<string> errpara = new List<string>();
// errpara.Add(defect.OldPartSno);
// FisException e = new FisException("MAT010", errpara);
// e.stopWF = false;
// throw e;
// }
// }
// else //only sn check
// {
// CurrentSession.AddValue(Session.SessionKeys.OldMB, product.PCBID);
// product.PCBID = "";
// defect.PartType = "MB";
// product.PCBModel = null;
// product.MAC = null;
// product.UUID = null;
// product.MBECR = null;
// product.CVSN = null;
// CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, "MB");
// //bSearch = true;
// }
// }
// else//LCM1/LCM2
// {
// foreach (ProductPart part in productParts)
// {
// if (defect.OldPart.Trim() != "" && part.PartID.Trim() == defect.OldPart.Trim() ||
// defect.OldPartSno.Trim() != "" && part.Value.Trim() == defect.OldPartSno.Trim())
// {
// //Dean 20110516 即當Faulty Part NO ,Faulty Part Sn 和Product_Part中的數據不匹配
// if (defect.OldPart.Trim() != "" && defect.OldPartSno.Trim() != "")
// {
// if (part.PartID == defect.OldPart.Trim() &&
// part.Value.Trim() == defect.OldPartSno.Trim())
// {
// //product.RemovePart(part.Value, part.PartID);
// defect.PartType = part.PartType;
// CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, part.PartType);
// if (part.PartType == "LCM1" || part.PartType=="LCM2")
// {
// bLCMType = true;
// }
// else
// {
// product.RemovePart(part.Value, part.PartID);
// }
// //if (!RemoveLCM1 && part.PartType == "LCM1") RemoveLCM1 = true;
// //if (!RemoveLCM2 && part.PartType == "LCM2") RemoveLCM2 = true;
// bSearch = true;
// break;
// }
// else //兩個都有欄，但不匹配的ErrorMessage
// {
// List<string> errpara = new List<string>();
// errpara.Add(defect.OldPartSno);
// FisException e = new FisException("MAT010", errpara);
// e.stopWF = false;
// throw e;
// }
// }
// else //only sn check
// {
// //product.RemovePart(part.Value, part.PartID);
// defect.PartType = part.PartType;
// CurrentSession.AddValue(ExtendSession.SessionKeys.PartType, part.PartType);
// if (part.PartType == "LCM1" || part.PartType == "LCM2")
// {
// bLCMType = true;
// }
// else
// {
// product.RemovePart(part.Value, part.PartID);
// }
// bSearch = true;
// //if (!RemoveLCM1 && part.PartType == "LCM1") RemoveLCM1 = true;
// //if (!RemoveLCM2 && part.PartType == "LCM2") RemoveLCM2 = true;
// break;
// }
// }
// }
// if (!bSearch)
// {
// List<string> errpara = new List<string>();
// errpara.Add(defect.OldPart);
// FisException e = new FisException("CHK027", errpara);
// e.stopWF = false;
// throw e;
// //throw new FisException("CHK027", errpara);
// }
// else if (bLCMType)
// {
// foreach (ProductPart part in productParts)
// {
// if (part.PartType == "LCM1" || part.PartType == "LCM2")
// {
// product.RemovePart(part.Value, part.PartID);
// }
// /*if (RemoveLCM1 || RemoveLCM2)
// {
// if ((RemoveLCM1 && part.PartType == "LCM2") ||
// (RemoveLCM2 & part.PartType == "LCM1"))
// {
// product.RemovePart(part.Value, part.PartID);
// }
// }*/
// }
// }
// }
// #region Remark
// /*if (!bSearch)
// {
// List<string> errpara = new List<string>();
// errpara.Add(defect.OldPart);
// FisException e = new FisException("CHK027", errpara);
// e.stopWF = false;
// throw e;
// //throw new FisException("CHK027", errpara);
// }
// else
// {
// foreach (ProductPart part in productParts)
// {
// if (part.PartType == "LCM1" || part.PartType == "LCM2")
// {
// product.RemovePart(part.Value, part.PartID);
// }
// }
// }*/
//#endregion
//}
//oldPart=partRep.GetPartByPartNo(defect.OldPartSno);
//if (oldPart == null)//Dean 20110427
//{
// List<string> errpara = new List<string>();
// errpara.Add(defect.OldPart);
// throw new FisException("CHK027", errpara);
//}
//if (string.Compare(FaRepairStation, Station, true) == 0)
//{
// if (string.Compare(oldPart.Type, "MB", true) == 0)
// {
// IMBRepository imr = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
// IProduct tempProduct = ((IProduct)repairTarget);
// //update Product table
// tempProduct.PCBID = null;
// //PCBModel, MAC, UUID, MBECR, CVSN 2010-03
// tempProduct.PCBModel = null;
// tempProduct.MAC = null;
// tempProduct.UUID = null;
// tempProduct.MBECR = null;
// tempProduct.CVSN = null;
// }
// else if (string.Compare(oldPart.Type, "LCM1", true) == 0 || string.Compare(oldPart.Type, "LCM2", true) == 0)
// {
// List<string> partTypeList = new List<string> {"LCM1", "LCM2"};
// productRep.DeleteProductPartByPartTypeDefered(CurrentSession.UnitOfWork, ((IProduct)repairTarget).ProId, partTypeList);
// }
//}
#endregion original 20110527
if (isReleaseMB ||isReleasePart)
productRep.Update(product, CurrentSession.UnitOfWork);
return base.DoExecute(executionContext);
}
catch (FisException ex)
{
throw;
}
}
/// <summary>
/// 找到DISMANTLE Process，得到对应的Release Type，解除绑定关系
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
List<string> erpara = new List<string>();
var currentProduct = (IProduct)CurrentSession.GetValue(Session.SessionKeys.Product);
IProductRepository productRepository = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
//更新PCBStatus信息
//bug:ITC-1268-0006
//reason:先进行mb的处理
//MB则通过Product.PCBID找到PCBNO
var mbsn = currentProduct.PCBID.Trim();
if (!string.IsNullOrEmpty(mbsn))
{
//MB状态修改为30 站
IMBRepository mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
IMB mb = mbRepository.Find(mbsn);
if (mb == null)
{
var ex1 = new FisException("SFC001", new string[] { mbsn });
throw ex1;
}
string line = string.IsNullOrEmpty(this.Line) ? mb.MBStatus.Line : this.Line;
//var mbLog = new MBLog(0, mb.Sn, mb.Model, "30", 1, line, this.Editor, DateTime.Now);
var mbLog = new MBLog(0, mb.Sn, mb.Model, "DM", 1, line, this.Editor, DateTime.Now);
mb.AddLog(mbLog);
//2012/3/15 For MB ：Update PCA..PCBStatus.Station=30->15
//mb.MBStatus.Station = "30";
mb.MBStatus.Station = "15";
//DEBUG:ITC-1360-0105 update status =1
mb.MBStatus.Status = MBStatusEnum.Pass;
mb.MBStatus.Editor = this.Editor;
//mb.MBStatus.Udt = DateTime.Now;
mbRepository.Update(mb, CurrentSession.UnitOfWork);
}
//DEBUG ITC-1360-0403
// 如果是VGA 则通过ProductInfo ProductID=PRDID# ValueType=’VGA’找到
IList<IMES.FisObject.FA.Product.ProductInfo> infos = new List<IMES.FisObject.FA.Product.ProductInfo>();
infos = currentProduct.ProductInfoes;
var mbsnforVGA = "";
foreach (IMES.FisObject.FA.Product.ProductInfo iInfo in infos)
{
if (iInfo.InfoType.Trim().ToUpper() == "VGA")
{
mbsnforVGA = iInfo.InfoValue.Trim();
break;
}
}
if (!string.IsNullOrEmpty(mbsnforVGA))
{
//MB状态修改为30 站
IMBRepository mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
IMB mbVGA = mbRepository.Find(mbsnforVGA);
if (mbVGA == null)
{
var ex1 = new FisException("SFC001", new string[] { mbsnforVGA });
throw ex1;
}
string line = string.IsNullOrEmpty(this.Line) ? mbVGA.MBStatus.Line : this.Line;
//var mbLog = new MBLog(0, mb.Sn, mb.Model, "30", 1, line, this.Editor, DateTime.Now);
var mbLog = new MBLog(0, mbVGA.Sn, mbVGA.Model, "DM", 1, line, this.Editor, DateTime.Now);
mbVGA.AddLog(mbLog);
//2012/3/15 For VGA ：Update PCA..PCBStatus.Station=30
mbVGA.MBStatus.Station = "30";
//DEBUG:ITC-1360-0105 update status =1
mbVGA.MBStatus.Status = MBStatusEnum.Pass;
mbVGA.MBStatus.Editor = this.Editor;
//mb.MBStatus.Udt = DateTime.Now;
mbRepository.Update(mbVGA, CurrentSession.UnitOfWork);
}
//更新Product表，将初始化Product表的剩余字段(供travel card用的)字段保留，其余都清空
//MO,Model,ProductID,ECR字段不清空
// Update set is null Product.PCBID/PCBModel/MBECR /MAC /CVSN
currentProduct.PCBID = "";
currentProduct.PCBModel = "";
currentProduct.MBECR = "";
currentProduct.MAC = "";
//new del currentProduct.UUID = "";
currentProduct.CVSN = "";
currentProduct.CUSTSN = "";
//currentProduct.BIOS = ""; why?
//currentProduct.IMGVER = "";
//currentProduct.WMAC = "";
//currentProduct.IMEI = "";
//currentProduct.MEID = "";
//currentProduct.ICCID = "";
//currentProduct.COAID = "";
//new del currentProduct.PizzaID = "";
//new del currentProduct.UnitWeight = 0.0M;
//new del currentProduct.CartonSN = "";
//new del currentProduct.CartonWeight = 0.0M;
//new del currentProduct.DeliveryNo = "";
//new del currentProduct.PalletNo = "";
//currentProduct.HDVD = "";
//currentProduct.BLMAC = "";
//currentProduct.TVTuner = "";
productRepository.Update(currentProduct, CurrentSession.UnitOfWork);
//B.删除Product_Part表
productRepository.DeleteProductPartByProIdDefered(CurrentSession.UnitOfWork,currentProduct.ProId);
//C.删除ProductInfo表
productRepository.DeleteProductInfoByProIdDefered(CurrentSession.UnitOfWork, currentProduct.ProId);
return base.DoExecute(executionContext);
}
/// <summary>
/// 找到DISMANTLE Process，得到对应的Release Type，解除绑定关系
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
List<string> erpara = new List<string>();
var currentProduct = (IProduct)CurrentSession.GetValue(Session.SessionKeys.Product);
IProductRepository productRepository = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
//若Product.PCBID不为空，则Update PCBStatus Set Station=’31’ where PCBNo = Product.PCBID 注意，不更新Line
//Insert PCBLog 若Product.PCBID不为空，则插入PCBLog(Station=’38’ and Status=1 and Line = PCBStatus.Line)
var mbsn = currentProduct.PCBID.Trim();
if (!string.IsNullOrEmpty(mbsn))
{
IMBRepository mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
IMB mb = mbRepository.Find(mbsn);
if (mb == null)
{
var ex1 = new FisException("SFC001", new string[] { mbsn });
throw ex1;
}
string line = mb.MBStatus.Line;//string.IsNullOrEmpty(this.Line) ? mb.MBStatus.Line : this.Line;
//var mbLog = new MBLog(0, mb.Sn, mb.Model, "30", 1, line, this.Editor, DateTime.Now);
var mbLog = new MBLog(0, mb.Sn, mb.Model, "38", 1, line, this.Editor, DateTime.Now);
mb.AddLog(mbLog);
//2012/3/15 For MB ：Update PCA..PCBStatus.Station=30->15
//mb.MBStatus.Station = "30";
mb.MBStatus.Station = "31";
//DEBUG:ITC-1360-0105 update status =1 ???????UC??
mb.MBStatus.Status = MBStatusEnum.Pass;
mb.MBStatus.Editor = this.Editor;
mb.MBStatus.Udt = DateTime.Now; //update????
mbRepository.Update(mb, CurrentSession.UnitOfWork);
}
//Update Product Update PCBID, PCBModel, MAC, UUID, MBECR, CVSN, CUSTSN, ECR 为空
currentProduct.PCBID = "";
currentProduct.PCBModel = "";
currentProduct.MAC = "";
currentProduct.UUID ="";
currentProduct.MBECR = "";
//new del currentProduct.UUID = "";
currentProduct.CVSN = "";
currentProduct.CUSTSN = "";
currentProduct.ECR = "";
productRepository.Update(currentProduct, CurrentSession.UnitOfWork);
//B.删除Product_Part表
productRepository.DeleteProductPartByProIdDefered(CurrentSession.UnitOfWork,currentProduct.ProId);
//C.删除ProductInfo表
productRepository.DeleteProductInfoByProIdDefered(CurrentSession.UnitOfWork, currentProduct.ProId);
return base.DoExecute(executionContext);
}
/// <summary>
/// Bind pat to owner:
/// A.Product.PCBID=mb sn#
///B.需要修改MB 的PCA..PCBStatus.Station = 32
///C.记录MB Log Inert PCA..PCBLog
///D.将MB相关信息写入Product表:
///Product.PCBModel=PCA..PCB.PCBModelID
///Product. MAC =PCA..PCB. MAC
///Product. UUID =PCA..PCB. UUID
///Product. MBECR =PCA..PCB. ECR
/// </summary>
/// <param name="part">part</param>
/// <param name="owner">owner</param>
public override void BindTo(IProductPart part, IPartOwner owner)
{
// if (!part.ValueType.Equals(("SN")))
// {
// base.BindTo(part, owner);
// return;
// }
var product = (IProduct)owner;
Session session = SessionManager.GetInstance.GetSession(product.ProId, Session.SessionType.Product);
var productRepoistory = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
var mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
var mb = mbRepository.Find(part.Value);
string line = string.IsNullOrEmpty(session.Line) ? product.Status.Line : session.Line;
//A
product.PCBID = mb.Sn;
//B
var status = new MBStatus(mb.Key.ToString(), "32", MBStatusEnum.Pass , session.Editor, line, DateTime.Now, DateTime.Now);
mb.MBStatus = status;
//C
var mbLog = new MBLog(
0,
mb.Sn,
mb.Model,
"32",
1,
line,
session.Editor,
DateTime.Now);
mb.AddLog(mbLog);
//D
product.PCBModel = mb.Model;
product.MAC = mb.MAC;
product.UUID = mb.UUID;
product.MBECR = mb.ECR;
product.CVSN = mb.CVSN;
mbRepository.Update(mb, session.UnitOfWork);
productRepoistory.Update(product, session.UnitOfWork);
}
/// <summary>
///
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
Session session = CurrentSession;
ActivityCommonImpl utl = ActivityCommonImpl.Instance;
IMB parentMB = utl.IsNull<IMB>(session, Session.SessionKeys.MB);
IList<String> sbSNList = session.GetValue(ExtendSession.SessionKeys.SmallBoardSNList) as IList<string>;
if (sbSNList == null || sbSNList.Count == 0)
{
return base.DoExecute(executionContext);
}
IList<String> smallBoardPartNoList = utl.IsNull <IList<String>>(session, ExtendSession.SessionKeys.SmallBoardPartNoList) as IList<string>;
IList<String> smallBoardECRList = utl.IsNull <IList<String>>(session, ExtendSession.SessionKeys.SmallBoardECRList) as IList<string>;
string moNo = parentMB.SMTMO;
string custSn = string.Empty;
string custVer = string.Empty;
string cvsn = parentMB.Sn;
string uuid = string.Empty;
string mac = string.Empty;
string dateCode = session.GetValue(Session.SessionKeys.DCode) as string;
//string ecr = session.GetValue(Session.SessionKeys.ECR) as string;
//string iecVer = session.GetValue(Session.SessionKeys.IECVersion) as string;
var sbMBList = new List<IMB>();
session.AddValue(ExtendSession.SessionKeys.SmallBoardMBList, sbMBList);
IMBRepository mbRep = utl.mbRep;
IPrintLogRepository LogRep = RepositoryFactory.GetInstance().GetRepository<IPrintLogRepository, PrintLog>();
int index=0;
foreach (string sn in sbSNList)
{
string model = smallBoardPartNoList[index];
string[] ecrList = smallBoardECRList[index].Split(GlobalConstName.SlashChar);
string ecr = ecrList[0];
string iecVer = ecrList[1];
string[] sbSN = sn.Split(GlobalConstName.SlashChar);
MB mb = new MB(sbSN[0], moNo, custSn, model, dateCode, mac, uuid, ecr, iecVer, custVer, cvsn, DateTime.Now, DateTime.Now);
MBStatus mbStatus = new MBStatus(sbSN[0], this.Station, MBStatusEnum.Pass, this.Editor, this.Line, DateTime.Now, DateTime.Now);
mb.MBStatus = mbStatus;
MBLog newLog = new MBLog(0, mb.Sn, mb.Model, Station, 1, Line, Editor, DateTime.Now);
mb.AddLog(newLog);
if (this.IsSplitMB)
{
mb.SetExtendedProperty(ConstName.PCBInfo.ChildMBSN, sbSN[1], this.Editor);
}
else
{
mb.SetExtendedProperty(ConstName.PCBInfo.ChildMBSN, parentMB.Sn, this.Editor);
}
mb.SetExtendedProperty(ConstName.PCBInfo.ParentMBSN, parentMB.Sn, this.Editor);
mb.SetExtendedProperty(ConstName.PCBInfo.IsSmallBoard, ConstName.Letter.Y, this.Editor);
mbRep.Add(mb, session.UnitOfWork);
sbMBList.Add(mb);
var item = new PrintLog
{
Name = PrintLogName,
BeginNo = sn,
EndNo = sn,
Station = this.Station,
Cdt = DateTime.Now,
LabelTemplate = string.Empty,
Descr =string.Format(PrintLogDescr,mb.Sn, sbSN[1], sbSN[0]) ,
Editor = this.Editor
};
LogRep.Add(item, session.UnitOfWork);
IMES.FisObject.PCA.MB.MBInfo items = new IMES.FisObject.PCA.MB.MBInfo();
items.InfoType = ConstName.PCBInfo.ChildMBSN;
items.InfoValue = mb.Sn;
items.Editor = this.Editor;
parentMB.AddMBInfo(items);
index++;
}
return base.DoExecute(executionContext);
}
/// <summary>
/// save for Docking MB
/// </summary>
/// <param name="partUnit">part Unit</param>
/// <param name="partOwner">part owner</param>
/// <param name="station">station</param>
/// <param name="key">session key</param>
public void Save(object partUnit, object partOwner, string station, string key)
{
if (partUnit == null)
{
throw new ArgumentNullException();
}
if (partOwner == null)
{
throw new ArgumentNullException();
}
var product = (Product)partOwner;
product.PCBID = ((PartUnit)partUnit).Sn;
Session session = SessionManager.GetInstance.GetSession(product.ProId, Session.SessionType.Product);
if (session == null)
{
throw new InstanceNotFoundException("Can not get Session instance from SessionManager!");
}
var mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
IMB mb = mbRepository.Find(product.PCBID);
if (mb != null)
{
//Product
// PCBID: MBSN
// PCBModel: PCB.PCBModelID
// MAC: PCB.MAC
// UUID: PCB.UUID
// MBECR: PCB.ECR
// CVSN: PCB.CVSN
product.PCBModel = mb.PCBModelID;
product.MAC = mb.MAC;
product.MBECR = mb.ECR;
if (!string.IsNullOrEmpty(mb.CVSN))
{
product.CVSN = mb.CVSN;
}
product.UUID = mb.UUID;
/*
//ProductInfo表
//InfoType=‘IECECR’
//InfoValue= PCB. IECECR
product.SetExtendedProperty("IECECR", mb.IECVER, session.Editor);
//ValueType=‘EEPROM’
//InfoValue= PCBInfo.Value(ValueType=‘EEPROM’)
object eeprom = mb.GetExtendedProperty("EEPROM");
if (eeprom != null)
{
product.SetExtendedProperty("EEPROM", eeprom, session.Editor);
}
//InfoType=’MBCT’
//InfoValue= PCBInfo.Value(ValueType=‘MBCT’)
object mbct = mb.GetExtendedProperty("MBCT");
if (mbct != null)
{
product.SetExtendedProperty("MBCT", mbct, session.Editor);
}
*/
///PCBStatus
/// PCBStatus.Station=’32’
/// PCBStatus.Status=1
///
#region record previous PCB Status
//IProductRepository productRepository = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
//System.Data.DataTable preStatus = CreateProductStatusTb();
//preStatus.Rows.Add(mb.Sn,
// mb.MBStatus.Station,
// mb.MBStatus.Status == MBStatusEnum.Pass ? 1 : 0,
// "",
// mb.MBStatus.Line,
// mb.MBStatus.TestFailCount,
// mb.MBStatus.Editor,
// //mb.MBStatus.Udt.ToString("yyyy-MM-dd HH:mm:ss.fff")
// mb.MBStatus.Udt
// );
//System.Data.DataTable curStatus = CreateProductStatusTb();
//curStatus.Rows.Add(mb.Sn,
// "32",
// 1,
// "",
// session.Line,
// mb.MBStatus.TestFailCount,
// session.Editor,
// //DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss.fff")
// DateTime.Now
// );
//SqlParameter para1 = new SqlParameter("PreStatus", System.Data.SqlDbType.Structured);
//para1.Direction = System.Data.ParameterDirection.Input;
//para1.Value = preStatus;
//SqlParameter para2 = new SqlParameter("Status", System.Data.SqlDbType.Structured);
//para2.Direction = System.Data.ParameterDirection.Input;
//para2.Value = curStatus;
//productRepository.ExecSpForNonQueryDefered(session.UnitOfWork,
// IMES.Infrastructure.Repository._Schema.SqlHelper.ConnectionString_PCA,
// "IMES_UpdatePCBStatus",
// para1,
// para2);
#endregion
#region recode PCBStatusEx for table structure
//IMES.DataModel.TbProductStatus preStatus = new IMES.DataModel.TbProductStatus()
//{
// ProductID = mb.Sn,
// Line = mb.MBStatus.Line,
// ReworkCode = string.Empty,
// TestFailCount = mb.MBStatus.TestFailCount,
// Station = mb.MBStatus.Station,
// Status = (int)mb.MBStatus.Status,
// Editor = mb.MBStatus.Editor,
// Udt = mb.MBStatus.Udt
//};
IList<TbProductStatus> preStatusList = mbRepository.GetMBStatus(new List<string>() { mb.Sn });
mbRepository.UpdatePCBPreStationDefered(session.UnitOfWork,
preStatusList);
#endregion
mb.MBStatus.Station = "32";
mb.MBStatus.Status = MBStatusEnum.Pass;
var mbLog = new MBLog(0, mb.Sn, mb.Model, "32", (int)MBStatusEnum.Pass, mb.MBStatus.Line, session.Editor,
new DateTime());
mb.AddLog(mbLog);
mbRepository.Update(mb, session.UnitOfWork);
//IProductRepository productRepository = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
//productRepository.Update(product, session.UnitOfWork);
/*
var setValue = new ProductPart();
var condition = new ProductPart();
if (!string.IsNullOrEmpty(mb.CVSN))
{
setValue.PartSn = mb.CVSN;
condition.CheckItemType = "CPU";
condition.ProductID = product.ProId;
productRepository.UpdateProductPartDefered(session.UnitOfWork, setValue, condition);
}
if (product.IsCDSI)
{
var item = new SpecialDetInfo { snoId = product.ProId, tp = "CDSI", sno1 = product.MAC, cdt = new DateTime(), id = 0, udt = new DateTime() };
productRepository.InsertSpecialDet(item);
// logger.Debug(" IMES.CheckItemModule.MB.Filter.SaveModule.Save Time : " + new DateTime());
}
*/
}
}
/// <summary>
///
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
var CurrentMB = (MB)CurrentSession.GetValue(Session.SessionKeys.MB);
string ecr = CurrentSession.GetValue(Session.SessionKeys.ECR) as string;
string iecVer = CurrentSession.GetValue(Session.SessionKeys.IECVersion) as string;
CurrentMB.ECR = ecr;
CurrentMB.IECVER = iecVer;
string mac = CurrentSession.GetValue(Session.SessionKeys.MAC) as string;
if (!string.IsNullOrEmpty(mac))
{
CurrentMB.MAC = mac;
}
string dateCode = CurrentSession.GetValue(Session.SessionKeys.DCode) as string;
if (!string.IsNullOrEmpty(dateCode))
{
CurrentMB.DateCode = dateCode;
}
IMBRepository mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
string eep = CurrentSession.GetValue(Session.SessionKeys.EEP) as string;
if (!string.IsNullOrEmpty(eep))
{
IMES.FisObject.PCA.MB.MBInfo eepInfo = new IMES.FisObject.PCA.MB.MBInfo(0, CurrentMB.Sn, "EEPROM", eep, Editor, DateTime.Now, DateTime.Now);
CurrentMB.AddMBInfo(eepInfo);
}
string mbct = CurrentSession.GetValue(Session.SessionKeys.MBCT) as string;
if (!string.IsNullOrEmpty(mbct))
{
IMES.FisObject.PCA.MB.MBInfo mbctInfo = new IMES.FisObject.PCA.MB.MBInfo(0, CurrentMB.Sn, "MBCT", mbct, Editor, DateTime.Now, DateTime.Now);
CurrentMB.AddMBInfo(mbctInfo);
FruDetInfo newFruDet = new FruDetInfo();
newFruDet.sno = mbct;
newFruDet.snoId = CurrentMB.Sn;
newFruDet.tp = "VC";
newFruDet.editor = Editor;
newFruDet.cdt = DateTime.Now;
newFruDet.udt = newFruDet.cdt;
mbRepository.InsertFruDetInfoDefered(CurrentSession.UnitOfWork, newFruDet);
MBLog newCTLog = new MBLog(0, CurrentMB.Sn, CurrentMB.Model, "SH", 1, "SA SHIPPING LABEL", Editor, DateTime.Now);
CurrentMB.AddLog(newCTLog);
}
mbRepository.Update(CurrentMB, CurrentSession.UnitOfWork);
return base.DoExecute(executionContext);
}
/// <summary>
/// Update SMTMO
/// Insert MoDismantleLog
/// 删除PCB，更新PCBStatus，Insert PCB Log
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
//FisException ex;
//List<string> erpara = new List<string>();
IList<string> mbsnlist = (List<string>)CurrentSession.GetValue(Session.SessionKeys.MBNOList);
if (mbsnlist != null && mbsnlist.Count > 0)
{
IMBRepository mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
//// Update SMTMO
IMBMORepository mbmoRepository = RepositoryFactory.GetInstance().GetRepository<IMBMORepository, IMBMO>();
IMBMO mbmoObject = (IMBMO)CurrentSession.GetValue(Session.SessionKeys.MBMO);
mbmoObject.PrintedQty = mbmoObject.PrintedQty - mbsnlist.Count;
CurrentSession.AddValue(Session.SessionKeys.MBMO, mbmoObject);
mbmoRepository.Update(mbmoObject, CurrentSession.UnitOfWork);
// Insert MoDismantleLog
// Delete PCB/PCBStatus
var disReason = CurrentSession.GetValue(Session.SessionKeys.Reason).ToString();
IList<MODismantleLog> modislogs = new List<MODismantleLog>();
IList<IMB> mbs = new List<IMB>();
IList<MBStatus> mbstatuslist=new List<MBStatus>();
IList<MBLog> mbloglist = new List<MBLog>();
foreach (string mbsno in mbsnlist)
{
IMB mbobject = mbRepository.Find(mbsno);
MODismantleLog modisObject = new MODismantleLog(mbsno, "SMTMo", mbobject.SMTMO, disReason, this.Editor, DateTime.Now, 0);
MBStatus mbstatus = new MBStatus(mbsno, this.Station, MBStatusEnum.Pass, this.Editor, this.Line, DateTime.Now, DateTime.Now);
MBLog mblog = new MBLog(0, mbsno, mbobject.Model, this.Station, 1, this.Line, this.Editor, DateTime.Now);
modislogs.Add(modisObject);
mbs.Add(mbobject);
mbstatuslist.Add(mbstatus);
mbloglist.Add(mblog);
}
IMODismantleLogRepository modismRepository = RepositoryFactory.GetInstance().GetRepository<IMODismantleLogRepository, MODismantleLog>();
modismRepository.AddBatchDefered(CurrentSession.UnitOfWork, modislogs);
mbRepository.RemoveBatchDefered(CurrentSession.UnitOfWork, mbs);
//<Gao Yongbo> 修改为只删除PCB，更新PCBStatus，Insert PCB Log
mbRepository.UpdateMBStatusBatchDefered(CurrentSession.UnitOfWork, mbstatuslist);
mbRepository.AddMBLogBatchDefered(CurrentSession.UnitOfWork, mbloglist);
}
# region "old"
// // 针对[Start MB SNo]，[End MB SNo] 范围内的每一个MB SNo，都要进行如下操作：
// // Update SMTMO
// //PrintQty ITC-1103-0148
// IMBMO mbmoObject = (IMBMO)CurrentSession.GetValue(Session.SessionKeys.MBMO);
// mbmoObject.PrintedQty = mbmoObject.PrintedQty - 1;
// CurrentSession.AddValue(Session.SessionKeys.MBMO, mbmoObject);
// mbmoRepository.Update(mbmoObject, CurrentSession.UnitOfWork);
// // Insert MoDismantleLog
// //参考方法：
// //INSERT MoDismantleLog SELECT PCBNo,'SMTMo',SMTMO,@reason,@Editor,GETDATE() FROM PCB (nolock) WHERE PCBNo = @mbsno
// IMODismantleLogRepository modismRepository = RepositoryFactory.GetInstance().GetRepository<IMODismantleLogRepository, MODismantleLog>();
// //(string pcbNo, string tp, string smtMo, string reason, string editor, DateTime cdt, int id)
//var disReason=CurrentSession .GetValue(Session.SessionKeys.Reason).ToString();
// MODismantleLog modisObject = new MODismantleLog(mbSn, "SMTMo",mbobject.SMTMO,disReason,this.Editor,DateTime.Now,0);
// modismRepository.Add(modisObject, CurrentSession.UnitOfWork);
// // Delete PCB/PCBStatus
// //由于投产的MB 不允许进行Dismantle，因此，没有必要清理PCB_Parts
// mbRepository.Remove(mbobject, CurrentSession.UnitOfWork);
# endregion
return base.DoExecute(executionContext);
}
/// <summary>
/// write MB LOG
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
string station = this.Station;
if (!string.IsNullOrEmpty(ManualStation))
{
string mStation = CurrentSession.GetValue(ManualStation) as string;
if (mStation != null)
{
station = mStation;
}
}
int status = this.IsPass ? 1 : 0;
if (station == "CL")
{
status = 2;
}
string line = default(string);
var mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
if (IsSingle)
{
var mb = CurrentSession.GetValue(Session.SessionKeys.MB) as IMB;
if (mb == null)
{
throw new NullReferenceException("MB in session is null");
}
line = string.IsNullOrEmpty(this.Line) ? mb.MBStatus.Line : this.Line;
if (!string.IsNullOrEmpty(this.LineSuffix))
{
line = line + LineSuffix;
}
var mbLog = new MBLog(
0,
mb.Sn,
mb.Model,
station,
status,
line,
this.Editor,
DateTime.Now);
mb.AddLog(mbLog);
mbRepository.Update(mb, CurrentSession.UnitOfWork);
CurrentSession.AddValue(Session.SessionKeys.MBLog, mbLog);
}
else
{
var mbList = CurrentSession.GetValue(Session.SessionKeys.MBList) as IList<IMB>;
if (mbList == null)
{
throw new NullReferenceException("MBList in session is null");
}
foreach (var mb in mbList)
{
line = string.IsNullOrEmpty(this.Line) ? mb.MBStatus.Line : this.Line;
var mbLog = new MBLog(
0,
mb.Sn,
mb.Model,
station,
status,
line,
this.Editor,
DateTime.Now);
mb.AddLog(mbLog);
mbRepository.Update(mb, CurrentSession.UnitOfWork);
}
}
return base.DoExecute(executionContext);
}
/// <summary>
/// 刷mbsno，调用该方法启动工作流，根据输入mbsno获取Lot
/// 返回MNSB LIST
/// </summary>
/// <param name="mbsno">mbsno</param>
/// <param name="editor">editor</param>
/// <param name="station">station</param>
/// <param name="customer">customer</param>
/// <param name="curMBInfo">curMBInfo</param>
/// <returns>model</returns>
public ArrayList inputMBSnoORLotNo(string InputStr, string InputType, string editor, string station, string customer)
{
logger.Debug("(PCAOQCInputImpl)Input MBSN or LotNo start:" + InputStr + "editor:" + editor + "station:" + station + "customer:" + customer);
FisException ex;
List<string> erpara = new List<string>();
ArrayList retLst = new ArrayList();
IMBRepository iMBRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
string LotNO = "";
ArrayList lstRet = new ArrayList();
try
{
//若刷入数据为MBSN，获取MBSN的所在LotNo（PCBLot.LotNo where PCBNo=@MBSN and Status=1），
// 则不存在记录，则报错：“该MBSN未组Lot”
if (InputType == "MBSN")
{
PcblotInfo conPcblot = new PcblotInfo();
conPcblot.pcbno = InputStr;
conPcblot.status = "1";
IList<PcblotInfo> pcblotLstA = new List<PcblotInfo>();
pcblotLstA = iMBRepository.GetPcblotInfoList(conPcblot);
if ((pcblotLstA == null) || (pcblotLstA.Count == 0))
{
erpara.Add(InputStr);
ex = new FisException("CHK312", erpara); //该MBSN未组Lot
throw ex;
}
if (pcblotLstA.Count==1)
{
LotNO = pcblotLstA[0].lotNo;
}
else
{
var pcblotLst =
from item in pcblotLstA
orderby item.cdt descending
select item;
foreach (PcblotInfo tmpNode in pcblotLst)
{
LotNO = tmpNode.lotNo;
break;
}
}
}
else
{
LotNO = InputStr;
}
string sessionKey = LotNO;
//2、 获取LotNo的详细信息(Lot.* where Lot.LotNo=@LotNo)；若Lot信息不存在，则报错：“该Lot不存在”
LotInfo conLotInfo = new LotInfo();
conLotInfo.lotNo = LotNO;
IList<LotInfo> getLotInfo = iMBRepository.GetlotInfoList(conLotInfo);
if ((getLotInfo == null) || (getLotInfo.Count == 0))
{
erpara.Add(LotNO);
ex = new FisException("CHK313", erpara); //该Lot不存在
throw ex;
}
//若Lot.Status=’0’，则报错：“Lot没有组合完成”；
if (getLotInfo[0].status == "0")
{
erpara.Add(LotNO);
ex = new FisException("CHK314", erpara); //Lot没有组合完成
throw ex;
}
//若Lot.Status=’4’，则报错：“该Lot已解散”；
if (getLotInfo[0].status == "4")
{
erpara.Add(LotNO);
ex = new FisException("CHK315", erpara); //该Lot已解散
throw ex;
}
//若Lot.Status=’9’，则报错：“该Lot已经通过OQC”
if (getLotInfo[0].status == "9")
{
erpara.Add(LotNO);
ex = new FisException("CHK316", erpara); //该Lot已经通过OQC
throw ex;
}
//4、 Update Lot Status
//若Lot.Status=1，则Update Lot.Status=2；
//Update PCBStatus(where PCBNo in PCBLot.PCBNo and Status=1 and LotNo=@LotNo)；
UnitOfWork uow = new UnitOfWork();
if (getLotInfo[0].status.Trim() == "1")
{
LotInfo setLotInfo = new LotInfo();
conLotInfo = new LotInfo();
conLotInfo.lotNo = getLotInfo[0].lotNo;
//conLotInfo.type = strType;
//setLotInfo.qty = retlot[0].qty + 1;//1;//setValue.Qty赋1，其他按需要赋值即可
setLotInfo.status = "2";
setLotInfo.editor = editor;
setLotInfo.udt = DateTime.Now;
//itemRepository.UpdateLotInfoDefered(CurrentSession.UnitOfWork, setLotInfo, conLotInfo);
iMBRepository.UpdateLotInfoDefered(uow, setLotInfo, conLotInfo);
//}
//DEBUG Mantis 1009(itc-1414-0224)
//update PCBStatus,PCBLog ->条件也要： Lot.Status=1
//Update PCBStatus：Station=’31A’Status=’1’
//Insert PCBLog
//Insert PCBLog：Station=’31A’Status=’1’
PcblotInfo conPcblot4 = new PcblotInfo();
//conPcblot = new PcblotInfo();
conPcblot4.lotNo= LotNO;
conPcblot4.status = "1";
IList<PcblotInfo>pcblotLst4 = new List<PcblotInfo>();
pcblotLst4 = iMBRepository.GetPcblotInfoList(conPcblot4);
if ((pcblotLst4 == null) || (pcblotLst4.Count == 0))
{
}
else
{
for (int i = 0; i < pcblotLst4.Count; i++)
{
IMB mb = iMBRepository.Find(pcblotLst4[i].pcbno);
if (mb != null)
{
mb.MBStatus.Station = "31A";
mb.MBStatus.Status = MBStatusEnum.Pass;
mb.MBStatus.Editor = editor;
mb.MBStatus.Udt = DateTime.Now;
//记录MB Log
MBLog mb_log = new MBLog(0, mb.Sn, mb.Model, "31A", (int) MBStatusEnum.Pass,
getLotInfo[0].line, editor, new DateTime());
mb.AddLog(mb_log);
iMBRepository.Update(mb, uow);
}
}
}
}
uow.Commit();
//5、重新获取Lot信息，并显示LotNo Line[Line.Descr] Type PCS = Qty Status[2：OQC In；3：Locked]
conLotInfo = new LotInfo();
conLotInfo.lotNo = LotNO;
IList<LotInfo> ReturnLotInfo = iMBRepository.GetlotInfoList(conLotInfo);
ILineRepository lineRepository = RepositoryFactory.GetInstance().GetRepository<ILineRepository, Line>();
Line lineInfo = lineRepository.Find(ReturnLotInfo[0].line);
if (lineInfo == null)
{
erpara.Add(sessionKey);
ex = new FisException("CHK317", erpara); //该PCB %1 没有PdLine，请确认！
throw ex;
}
string lotLineinfo = ReturnLotInfo[0].line.Trim() + "[" +lineInfo.Descr.Trim() + "]";
string strStatus="";
if (ReturnLotInfo[0].status == "2")
{
strStatus = "OQC In";
}
else if (ReturnLotInfo[0].status == "3")
{
strStatus = "Locked";
}
//Old--获取PCBLot信息，并显示PCBLot.PCBNo where LotNo=@LotNo and Status=1
//PcblotInfo RtnconPcblot = new PcblotInfo();
//RtnconPcblot.lotNo = ReturnLotInfo[0].lotNo;
//RtnconPcblot.status = "1";
//IList<PcblotInfo> rtnpcblotLst = new List<PcblotInfo>();
//rtnpcblotLst = iMBRepository.GetPcblotInfoList(RtnconPcblot);
//IList<string> mbsnList = new List<string>();
//foreach (PcblotInfo pcblotnode in rtnpcblotLst)
//{
// mbsnList.Add(pcblotnode.pcbno.Trim());
//}
//UC Update
// 获取LotSetting.CheckQty(先用PdLine检索，若不存在，再用’ALL’检索，若不存在，则报错：“请IE维护LotSetting”)，
//若[Checked Qty]>=LotSetting.CheckQty，---则执行[4 Save Data] PASS分支:界面初始时不自动处理
var checkQtyforLine = 0;
LotSettingInfo conlotSetting = new LotSettingInfo();
conlotSetting.line = ReturnLotInfo[0].line;
//add type
conlotSetting.type = ReturnLotInfo[0].type;
IList<LotSettingInfo> LotSettinglst = iMBRepository.GetLotSettingInfoList(conlotSetting);
if ((LotSettinglst == null) || (LotSettinglst.Count == 0))
{
conlotSetting = new LotSettingInfo();
conlotSetting.line = "ALL";
conlotSetting.type = ReturnLotInfo[0].type;
LotSettinglst = iMBRepository.GetLotSettingInfoList(conlotSetting);
if ((LotSettinglst == null) || (LotSettinglst.Count == 0))
{
//报错：“请与IE联系，维护 Lot 相关设置”
List<string> errpara = new List<string>();
//errpara.Add(currenMB.Sn);
FisException ex1 = new FisException("CHK278", errpara);
throw ex1;
}
else
{
checkQtyforLine = LotSettinglst[0].checkQty;
}
}
else
{
checkQtyforLine = LotSettinglst[0].checkQty;
}
//======================================================================================
//UC Update 2012/07/03
//6、 获取PCBLot信息，并显示在[MBSN List]和[Checked Qty]( [Checked Qty]: Sum(Checked))
//参考方法：
//select a.PCBNo, ISNULL(b.Status,'0') as Checked from PCBLot a
// left Join PCBLotCheck b
// on a..PCBNo where LotNo = b.=@LotNo
// and a.PCBNo = b.PCBNo
// where a.LotNo=@LotNo and a.Status=1
// order by a.PCBNo
IList<string> mbsnList = new List<string>();
IList<string> checkedList = new List<string>();
DataTable PcbLotCheckedTable = iMBRepository.GetPcbNoAndCheckStatusList(ReturnLotInfo[0].lotNo, "1");
if (PcbLotCheckedTable == null)
{
//throw new FisException("CHM001", new string[] { model1 });
}
else
{
var pcbLotCheckedCount = PcbLotCheckedTable.Rows.Count;
for (int i = 0; i < pcbLotCheckedCount; i++)
{
mbsnList.Add(PcbLotCheckedTable.Rows[i][0] as string);
checkedList.Add(PcbLotCheckedTable.Rows[i][1] as string);
}
}
var pcblotcheck = new PcblotcheckInfo();
pcblotcheck.lotNo = LotNO;
pcblotcheck.status = "1";
var iCheckqty = iMBRepository.GetCountOfPcblotCheck(pcblotcheck);
var havePromptstr = "";
if (ReturnLotInfo[0].status !="2")
{
try
{
throw new FisException("CHK401", new List<string>());
}
catch (FisException ex1)
{
havePromptstr = ex1.mErrmsg;
}
}
lstRet.Add(ReturnLotInfo[0].lotNo); //0
lstRet.Add(lotLineinfo); //1
lstRet.Add(ReturnLotInfo[0].type); //2
lstRet.Add(ReturnLotInfo[0].qty); //3
lstRet.Add(strStatus); //4
lstRet.Add(mbsnList); //5
lstRet.Add(ReturnLotInfo[0].line); //6
lstRet.Add(checkedList); //7
lstRet.Add(checkQtyforLine); //8
lstRet.Add(iCheckqty); //9
lstRet.Add(havePromptstr); //10
return lstRet;
}
catch (FisException e)
{
logger.Error(e.mErrmsg, e);
throw new Exception(e.mErrmsg);
}
catch (Exception e)
{
logger.Error(e.Message, e);
throw new SystemException(e.Message);
}
finally
{
logger.Debug("(PCAOQCInputImpl)Input MBSN or LotNo end Input:" + InputStr + "editor:" + editor + "station:" + station + "customer:" + customer);
}
}
/// <summary>
///
/// </summary>
/// <param name="executionContext"></param>
/// <returns></returns>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
Session session = CurrentSession;
var CurrentMB = (MB)session.GetValue(Session.SessionKeys.MB);
string moNo = CurrentMB.SMTMO;
string model = CurrentMB.Model;
string custSn = string.Empty;
string custVer = string.Empty;
string cvsn = string.Empty;
string uuid = string.Empty;
bool IsRCTO = false;
if (session.GetValue(Session.SessionKeys.IsRCTO) != null)
{
IsRCTO = (bool)session.GetValue(Session.SessionKeys.IsRCTO);
}
string CheckCode = session.GetValue(Session.SessionKeys.CheckCode) as string;
string dateCode = session.GetValue(Session.SessionKeys.DCode) as string;
string ecr = session.GetValue(Session.SessionKeys.ECR) as string;
string iecVer = session.GetValue(Session.SessionKeys.IECVersion) as string;
var MACList = (IList<string>)session.GetValue(Session.SessionKeys.MACList);
var MBCTList = (IList<string>)session.GetValue(Session.SessionKeys.MBCTList);
var EEPList = (IList<string>)session.GetValue(Session.SessionKeys.EEPList);
var NewMBSnList = session.GetValue(Session.SessionKeys.MBNOList) as List<string>;
var MBNOList = session.GetValue(Session.SessionKeys.MBNOList) as List<string>;
if (IsRCTO && CheckCode !="R") {
MBNOList = session.GetValue(Session.SessionKeys.RCTOChildMBSnList) as List<string>;
}
var MBObjectList = new List<IMB>();
session.AddValue(Session.SessionKeys.MBList, MBObjectList);
IMBRepository mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
IPrintLogRepository LogRepository = RepositoryFactory.GetInstance().GetRepository<IPrintLogRepository, PrintLog>();
bool hasPCBVer = false;
if (session.GetValue(ExtendSession.SessionKeys.HasPCBVer) != null)
{
hasPCBVer = (bool)session.GetValue(ExtendSession.SessionKeys.HasPCBVer);
if (hasPCBVer)
{
custVer = (string)session.GetValue(ExtendSession.SessionKeys.PCBVer);
}
}
for (int i = 0; i < MBNOList.Count; i++)
{
string mac = string.Empty;
if (MACList != null)
{
mac = MACList[i];
}
MB mb = new MB(MBNOList[i], moNo, custSn, model, dateCode, mac, uuid, ecr, iecVer, custVer, cvsn, DateTime.Now, DateTime.Now);
MBStatus mbStatus = new MBStatus(MBNOList[i], this.Station, MBStatusEnum.Pass, this.Editor, this.Line, DateTime.Now, DateTime.Now);
mb.MBStatus = mbStatus;
if (IsRCTO && CheckCode != "R")
{
IMES.FisObject.PCA.MB.MBInfo RCTOChangeInfo = new IMES.FisObject.PCA.MB.MBInfo(0, mb.Sn, "RCTOChange", NewMBSnList[i], Editor, DateTime.Now, DateTime.Now);
mb.AddMBInfo(RCTOChangeInfo);
}
if (EEPList != null)
{
IMES.FisObject.PCA.MB.MBInfo eepInfo = new IMES.FisObject.PCA.MB.MBInfo(0, mb.Sn, "EEPROM", EEPList[i], Editor, DateTime.Now, DateTime.Now);
mb.AddMBInfo(eepInfo);
}
if (MBCTList != null)
{
IMES.FisObject.PCA.MB.MBInfo mbctInfo = new IMES.FisObject.PCA.MB.MBInfo(0, mb.Sn, "MBCT", MBCTList[i], Editor, DateTime.Now, DateTime.Now);
mb.AddMBInfo(mbctInfo);
FruDetInfo newFruDet = new FruDetInfo();
newFruDet.sno = MBCTList[i];
newFruDet.snoId = mb.Sn;
newFruDet.tp = "VC";
newFruDet.editor = Editor;
newFruDet.cdt = DateTime.Now;
newFruDet.udt = newFruDet.cdt;
mbRepository.InsertFruDetInfoDefered(session.UnitOfWork, newFruDet);
MBLog newCTLog = new MBLog(0, mb.Sn, mb.Model, "SH", 1, "SA SHIPPING LABEL", Editor, DateTime.Now);
mb.AddLog(newCTLog);
}
if (session.GetValue("IsPilotMOCheck") != null && (bool)session.GetValue("IsPilotMOCheck"))
{
string pilotmo = (string)session.GetValue(Session.SessionKeys.PilotMoNo);
mb.SetExtendedProperty(ConstName.PCBInfo.PilotMo, pilotmo, this.Editor);
}
mb.SetExtendedProperty(ConstName.PCBInfo.ParentMBSN, mb.Sn, this.Editor);
MBLog newLog = new MBLog(0, mb.Sn, mb.Model, Station, 1, Line, Editor, DateTime.Now);
mb.AddLog(newLog);
mbRepository.Add(mb, session.UnitOfWork);
MBObjectList.Add(mb);
var item = new PrintLog
{
Name = session.GetValue(Session.SessionKeys.PrintLogName).ToString(),
BeginNo = MBNOList[i],
EndNo = MBNOList[i],
Descr = session.GetValue(Session.SessionKeys.PrintLogDescr).ToString(),
Editor = this.Editor
};
LogRepository.Add(item, session.UnitOfWork);
IMES.FisObject.PCA.MB.MBInfo items = new IMES.FisObject.PCA.MB.MBInfo();
items.InfoType = ConstName.PCBInfo.ChildMBSN;
items.InfoValue = mb.Sn;
items.Editor = this.Editor;
CurrentMB.AddMBInfo(items);
}
return base.DoExecute(executionContext);
}
public string saveMB(string Inputstring, string editor, string station, string customer)
{
logger.Debug("(PCAOQCInputImpl)saveMB start Input:" + Inputstring + "editor:" + editor + "station:" + station + "customer:" + customer);
//FisException ex;
List<string> erpara = new List<string>();
ArrayList retLst = new ArrayList();
IMBRepository iMBRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
ArrayList lstRet = new ArrayList();
UnitOfWork uow = new UnitOfWork();
string returnstring = "OK";
try
{
IMB mb = iMBRepository.Find(Inputstring);
if (mb != null)
{
string preStation = mb.MBStatus.Station;
string status = (string)mb.MBStatus.Status.ToString();
string line = mb.MBStatus.Line;
if (preStation != "15")
{
string[] param = { Inputstring, status, preStation };
throw new FisException("SFC009", param);
}
mb.MBStatus.Station = "31A";
mb.MBStatus.Status = MBStatusEnum.Pass;
mb.MBStatus.Editor = editor;
mb.MBStatus.Udt = DateTime.Now;
//记录MB Log
MBLog mb_log = new MBLog(0, mb.Sn, mb.Model, "31A", (int)MBStatusEnum.Pass, line, editor, new DateTime());
mb.AddLog(mb_log);
iMBRepository.Update(mb, uow);
}
uow.Commit();
return returnstring;
}
catch (FisException e)
{
logger.Error(e.mErrmsg);
throw e;
}
catch (Exception e)
{
logger.Error(e.Message);
throw e;
}
finally
{
logger.Debug("(PCAOQCInputImpl)saveMB End Input:" + Inputstring + "editor:" + editor + "station:" + station + "customer:" + customer);
}
}
/// <summary>
/// 檢查QTime 及設定QTime Action
/// </summary>
protected internal override ActivityExecutionStatus DoExecute(ActivityExecutionContext executionContext)
{
Session session = CurrentSession;
ActivityCommonImpl utl = ActivityCommonImpl.Instance;
IProductRepository prodRep = utl.prodRep; //RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
IMBRepository mbRep = utl.mbRep;
IQTimeRepository qTimeRep = RepositoryFactory.GetInstance().GetRepository<IQTimeRepository, QTime>();
ILineRepository lineRep = utl.lineRep; //RepositoryFactory.GetInstance().GetRepository<ILineRepository, Line>();
DateTime now=DateTime.MinValue;
#region 檢查 Product ,QTime及LineEx 設置資料，若無，則不做
string pdline = this.Line;
IProduct prod =null;
IMB mb =null;
string SN = null;
string modelName = null;
string familyName = null;
DateTime udt = DateTime.Now;
string preStation = null;
if (this.ProcessType == ProcessTypeEnum.Product)
{
prod = utl.IsNull<IProduct>(session,Session.SessionKeys.Product);
modelName = prod.Model;
SN = prod.ProductID;
familyName = prod.Family;
udt = prod.Status.Udt;
preStation = prod.Status.StationId.Trim();
if (string.IsNullOrEmpty(pdline))
{
pdline = prod.Status.Line;
if (string.IsNullOrEmpty(pdline))
{
IList<ProductStatusExInfo> preStatusList = prodRep.GetProductPreStation(new List<string> { prod.ProId });
if (preStatusList.Count > 0)
{
pdline = preStatusList[0].PreLine;
}
}
}
}
else
{
mb = utl.IsNull<IMB>(session, Session.SessionKeys.MB);
modelName = mb.Model;
SN = mb.Sn;
familyName = mb.Family;
udt = mb.MBStatus.Udt;
preStation = mb.MBStatus.Station;
if (string.IsNullOrEmpty(pdline))
{
pdline = mb.MBStatus.Line;
if (string.IsNullOrEmpty(pdline))
{
IList<PCBStatusExInfo> preStatusList = mbRep.GetPCBPreStation(new List<string> { mb.Sn });
if (preStatusList.Count > 0)
{
pdline = preStatusList[0].PreLine;
}
}
}
}
Line line = lineRep.Find(pdline);
if (prod==null ||
line == null ||
line.LineEx == null ||
string.IsNullOrEmpty(line.LineEx.AliasLine))
{
//throw new FisException();
return base.DoExecute(executionContext);
}
string aliasLine = line.LineEx.AliasLine;
//QTime qTime = qTimeRep.Find(new string[] { aliasLine, this.Station, prod.ProId });
QTime qTime = qTimeRep.GetPriorityQTime(aliasLine, this.Station, SN,modelName, familyName);
if (qTime == null )
{
return base.DoExecute(executionContext);
}
#endregion
#region 檢查QTime.StopTime,計算是否紀錄停線,不做DB事務
if (qTime != null && qTime.StopTime > 0)
{
LineStationLastProcessTime processTime= qTimeRep.GetLastProcessTime(aliasLine, this.Station);
if (processTime != null)
{
now = processTime.Now;
if (processTime.SpeedTime >= qTime.StopTime)
{
LineStationStopPeriodLog periodLog = new LineStationStopPeriodLog
{
Line = aliasLine,
Station = this.Station,
StartTime = processTime.ProcessTime,
EndTime = now,
Editor = this.Editor
};
qTimeRep.AddLineStationStopPeriodLog(periodLog);
}
}
// 沒有最後一次Process Time 不考慮Check TimeOut
else
{
now = SqlHelper.GetDateTime();
}
processTime = new LineStationLastProcessTime
{
Line = aliasLine,
Station = this.Station,
ProductID = SN,
ProcessTime = now,
Editor = this.Editor
};
qTimeRep.UpdateLineStationLastProcessTime(processTime);
//刪除過時的停線紀錄
qTimeRep.RemoveStationStopPeriodLog(aliasLine, this.Station, this.RemainLogDay);
}
#endregion
#region 檢查TimeOut ,計算是否QTime逾時並執行QTime Action
IUnitOfWork uow = new UnitOfWork();
bool isDoDefect = false;
bool isDoHoldStation = false;
string defectStation = this.Station;
int timeOut = 0;
//int stopTime = 0;
bool isCheckTimeOutStation = true;
bool isTimeOut = false;
//string preStation = prod.Status.StationId.Trim();
TestLog.TestLogStatus defectStatus = TestLog.TestLogStatus.Fail;
//檢查TimeOut例外站點
if (!string.IsNullOrEmpty(qTime.ExceptStation))
{
string[] exceptStations = qTime.ExceptStation.Split(Delimiter);
isCheckTimeOutStation = !exceptStations.Contains(preStation);
}
if (qTime != null && qTime.TimeOut > 0 &&
isCheckTimeOutStation)
{
if (now == DateTime.MinValue)
{
now = SqlHelper.GetDateTime();
}
//計算TimeOut
//IList<int> timeOutList = qTimeRep.CalLineStopTime(aliasLine, "69", prod.Status.Udt, now);
//stopTime = timeOutList[0];
//timeOut = (timeOutList[1] - timeOutList[0]) ;
IList<LineStopLogInfo> logs = qTimeRep.CalLineStopMillionSecond(aliasLine, this.Station, udt, now);
double stopMillionSecond = 0;
foreach( LineStopLogInfo item in logs)
{
stopMillionSecond = stopMillionSecond + (item.EndTime - item.StartTime).TotalMilliseconds;
}
timeOut = (int)(((now - udt).TotalMilliseconds - stopMillionSecond) / 1000);
// 判別有沒有TimeOut
if ((qTime.Category == QTimeCategoryEnum.Max && timeOut >= qTime.TimeOut) ||
(qTime.Category == QTimeCategoryEnum.Min && timeOut <= qTime.TimeOut))
{
isTimeOut = true;
if (!string.IsNullOrEmpty(qTime.DefectCode))
{
isDoDefect = true;
}
if (!string.IsNullOrEmpty(qTime.HoldStation))
{
defectStation = qTime.HoldStation;
defectStatus = (qTime.HoldStatus == QTimeStationStatusEnum.Fail ?
TestLog.TestLogStatus.Fail : TestLog.TestLogStatus.Pass);
isDoHoldStation = true;
}
}
//執行QTime Action
if (isDoDefect || isDoHoldStation)
{
if (this.ProcessType == ProcessTypeEnum.Product)
{
prod.UpdateStatus(new IMES.FisObject.FA.Product.ProductStatus()
{
Line = pdline,
ProId = SN,
TestFailCount = 0,
ReworkCode = string.Empty,
StationId = defectStation,
Status = (defectStatus == TestLog.TestLogStatus.Fail ?
StationStatus.Fail : StationStatus.Pass),
Editor = this.Editor,
Udt = now
});
IList<IMES.DataModel.TbProductStatus> stationList = prodRep.GetProductStatus(new List<string> { prod.ProId });
prodRep.UpdateProductPreStationDefered(uow, stationList);
#region write Productlog
ProductLog productLog = new ProductLog
{
Model = prod.Model,
Status = (defectStatus == TestLog.TestLogStatus.Fail ?
StationStatus.Fail : StationStatus.Pass),
Editor = this.Editor,
Line = pdline,
Station = defectStation,
Cdt = now
};
prod.AddLog(productLog);
}
else
{
MBStatus mbStatus= new MBStatus(SN, defectStation, (defectStatus == TestLog.TestLogStatus.Fail ?
MBStatusEnum.Fail : MBStatusEnum.Pass), this.Editor, pdline, now, now);
mb.MBStatus = mbStatus;
IList<TbProductStatus> preStatusList = mbRep.GetMBStatus(new List<string>() { SN });
mbRep.UpdatePCBPreStationDefered(uow,
preStatusList);
#region Write MBlog
var mbLog = new MBLog(
0,
mb.Sn,
mb.Model,
defectStation,
(defectStatus == TestLog.TestLogStatus.Fail ?
0 : 1),
pdline,
this.Editor,
now);
mb.AddLog(mbLog);
#endregion
}
#endregion
}
//unpack Pizza part
if (this.ProcessType == ProcessTypeEnum.Product &&
isDoHoldStation &&
defectStation == UnPizzaDefectStation)
{
utl.UnPack.unPackPizzaPart(session, uow, this.Editor);
utl.UnPack.unPackPAKProductPart(session, uow, this.Editor);
prodRep.DeleteProductPartByProductIDAndStationDefered(uow,
new List<string>() { SN },
UnpackPizzaStationList,
this.Editor);
}
if (isDoDefect)
{
#region add test log
string actionName = qTime.Category.ToString() + QTIMEName;
string errorCode = string.Empty;
string descr = string.Format(DefectDescrFormat, preStation, this.Station, timeOut.ToString()); //"PreStation:"+preStation+ "~CurStation:"+this.Station +"~TimeOut:"+ timeOut.ToString();
//TestLog testLog = new TestLog(0, prod.ProId, this.Line, "", defectStation, defectStatus, "", this.Editor, "PRD", DateTime.Now);
TestLog testLog = new TestLog(0, SN, pdline, string.Empty, defectStation, defectStatus, string.Empty,
actionName, errorCode, descr, this.Editor, DefectType, now);
if (this.ProcessType == ProcessTypeEnum.Product)
{
prod.AddTestLog(testLog);
//add defect
TestLogDefect defectItem = new TestLogDefect(0, 0, qTime.DefectCode, this.Editor, now);
testLog.AddTestLogDefect(defectItem);
}
else
{
mb.AddTestLog(testLog);
TestLogDefect defectItem = new TestLogDefect(0, 0, qTime.DefectCode, this.Editor, now);
testLog.AddTestLogDefect(defectItem);
}
#endregion
}
if (isDoDefect || isDoHoldStation)
{
if (this.ProcessType == ProcessTypeEnum.Product)
{
prodRep.Update(prod, uow);
}
else
{
mbRep.Update(mb, uow);
}
uow.Commit();
if (qTime.Category == QTimeCategoryEnum.Min)
{
int diffTime = (timeOut - qTime.TimeOut) / 60;
throw new FisException("CHK093", new string[] { diffTime.ToString() });
}
else
{
throw new FisException("QTM001", new string[] { SN, qTime.Category.ToString() + QTIMEName, timeOut.ToString() });
}
}
//Min QTime Warning message nothing to do
if (isTimeOut && qTime.Category == QTimeCategoryEnum.Min)
{
int diffTime = (timeOut - qTime.TimeOut) / 60;
throw new FisException("CHK093", new string[]{diffTime.ToString()});
}
}
#endregion
return base.DoExecute(executionContext);
}