Beispiel #1
0
 public void LoadUI(InstallSetup setup)
 {
     chkIgnoreWarnings.Checked = setup.AcceptVersionWarningsChangedScripts && setup.AcceptVersionWarningsNewScripts;
     chkSkipNormalize.Checked  = setup.SkipNormalize;
     chkUseTransaction.Checked = setup.UseTransaction;
     chkUseHash.Checked        = setup.UseHash;
 }
Beispiel #2
0
 public void SaveUI(InstallSetup setup)
 {
     setup.AcceptVersionWarningsChangedScripts = chkIgnoreWarnings.Checked;
     setup.AcceptVersionWarningsNewScripts     = chkIgnoreWarnings.Checked;
     setup.SkipNormalize  = chkSkipNormalize.Checked;
     setup.UseTransaction = chkUseTransaction.Checked;
     setup.UseHash        = chkUseHash.Checked;
 }
Beispiel #3
0
        /// <summary>
        /// Performs an install of a database
        /// </summary>
        public void Install(InstallSetup setup)
        {
            if (setup.InstallStatus == InstallStatusConstants.Create)
            {
                //Conection cannot reference an existing database
                if (SqlServers.TestConnectionString(setup.ConnectionString))
                {
                    throw new Exception("The connection string references an existing database.");
                }

                //The new database name must be specified
                if (string.IsNullOrEmpty(setup.NewDatabaseName))
                {
                    throw new Exception("A new database name was not specified.");
                }

                //The connection string and the new database name must be the same
                var builder = new System.Data.SqlClient.SqlConnectionStringBuilder(setup.ConnectionString);
                if (builder.InitialCatalog.ToLower() != setup.NewDatabaseName.ToLower())
                {
                    throw new Exception("A new database name does not match the specified connection string.");
                }

                SqlServers.CreateDatabase(setup);
            }
            else if (setup.InstallStatus == InstallStatusConstants.Upgrade)
            {
                //The connection string must reference an existing database
                if (!SqlServers.TestConnectionString(setup.ConnectionString))
                {
                    throw new Exception("The connection string does not reference a valid database.");
                }
            }

            try
            {
                UpgradeInstaller.UpgradeDatabase(setup);
            }
            catch (InvalidSQLException ex)
            {
                var sb = new StringBuilder();
                sb.AppendLine();
                sb.AppendLine("BEGIN ERROR SQL");
                sb.AppendLine(ex.SQL);
                sb.AppendLine("END ERROR SQL");
                sb.AppendLine();
                System.Diagnostics.Debug.WriteLine(sb.ToString());
                UpgradeInstaller.LogError(ex, sb.ToString());
                throw;
            }
            catch (Exception ex)
            {
                throw;
            }
        }
Beispiel #4
0
        private bool IdentifyDatabaseConnectionString(InstallSetup setup)
        {
            var F = new IdentifyDatabaseForm(setup);

            if (F.ShowDialog() == DialogResult.OK)
            {
                this.Action   = F.Action;
                this.Settings = F.Settings;
                return(true);
            }
            return(false);
        }
Beispiel #5
0
 /// <summary>
 /// Returns the upgrade script for the specified database
 /// </summary>
 public string GetScript(InstallSetup setup)
 {
     if (string.IsNullOrEmpty(setup.ConnectionString) && setup.Version == null)
     {
         throw new Exception("The connection string must be set.");
     }
     if (setup.SkipSections == null)
     {
         setup.SkipSections = new List <string>();
     }
     return(UpgradeInstaller.GetScript(setup));
 }
Beispiel #6
0
        public IdentifyDatabaseForm(InstallSetup setup)
            : this()
        {
            this.Settings = new InstallSettings();
            _setup        = setup;
            this.InstallSettingsUI1.LoadUI(setup);

            cmdCancel.Click += new EventHandler(cmdCancel_Click);
            cmdOK.Click     += new EventHandler(cmdOK_Click);
            cboConnectionDatabaseName.DropDown             += cboConnectionDatabaseName_DropDown;
            cboConnectionServerName.DropDown               += ServerName_DropDown;
            cboCreationServerName.DropDown                 += ServerName_DropDown;
            buttonCreationRefresh.Click                    += buttonCreationRefresh_Click;
            optConnectionUserPassword.CheckedChanged       += optConnectionUserPassword_CheckedChanged;
            radioButtonCreationUserPassword.CheckedChanged += radioButtonCreationUserPassword_CheckedChanged;
            optCreationIntegratedSecurity.CheckedChanged   += optCreationIntegratedSecurity_CheckedChanged;
            cmdViewHistory.Click += cmdViewHistory_Click;
            buttonConnectionTestConnection.Click           += buttonConnectionTestConnection_Click;
            optConnectionIntegratedSecurity.CheckedChanged += optConnectionIntegratedSecurity_CheckedChanged;
            buttonConnectionRefresh.Click += buttonConnectionRefresh_Click;

            //Turn off features for Azure
            //if (SqlServers.DatabaseVersion != SqlServers.SQLServerTypeConstants.SQLAzure)
            //  tabControlChooseDatabase.TabPages.Remove(tabPageAzureCopy);

            this.Settings.Load();
            if (this.Settings.IsLoaded)
            {
                chkSaveSettings.Checked = true;

                //Tab Upgrade
                cboConnectionServerName.Text            = this.Settings.PrimaryServer;
                optConnectionIntegratedSecurity.Checked = this.Settings.PrimaryUseIntegratedSecurity;
                optConnectionUserPassword.Checked       = !optConnectionIntegratedSecurity.Checked;
                txtConnectionUserName.Text     = this.Settings.PrimaryUserName;
                txtConnectionPassword.Text     = this.Settings.PrimaryPassword;
                cboConnectionDatabaseName.Text = this.Settings.PrimaryDatabase;

                //Tab Create
                cboCreationServerName.Text              = this.Settings.PrimaryServer;
                txtCreationDatabaseName.Text            = this.Settings.PrimaryDatabase;
                optCreationIntegratedSecurity.Checked   = this.Settings.PrimaryUseIntegratedSecurity;
                radioButtonCreationUserPassword.Checked = !optCreationIntegratedSecurity.Checked;
                txtCreationUserName.Text = this.Settings.PrimaryUserName;
                txtCreationPassword.Text = this.Settings.PrimaryPassword;
                txtDiskPath.Text         = this.Settings.DiskPath;

                //Tab Azure Copy
                azureCopyControl1.LoadSettings(this.Settings);
            }
            this.UpdateLogin();
        }
Beispiel #7
0
        /// <summary />
        private void UIInstall(InstallSetup setup)
        {
            if (IdentifyDatabaseConnectionString(setup))
            {
                setup.ConnectionString = this.Settings.GetPrimaryConnectionString();
                setup.InstallStatus    = InstallStatusConstants.Upgrade;

                if (this.Action == ActionTypeConstants.Create)
                {
                    setup.InstallStatus = InstallStatusConstants.Create;
                    UpgradeInstaller.UpgradeDatabase(setup);
                }
                else if (this.Action == ActionTypeConstants.Upgrade)
                {
                    UpgradeInstaller.UpgradeDatabase(setup);
                }
                else if (this.Action == ActionTypeConstants.AzureCopy)
                {
                    UpgradeInstaller.AzureCopyDatabase(this.Settings);
                }
            }
        }
Beispiel #8
0
        private bool CreateDatabase()
        {
            var error         = false;
            var connectString = SqlServers.BuildConnectionString(optCreationIntegratedSecurity.Checked, string.Empty, cboCreationServerName.Text, txtCreationUserName.Text, txtCreationPassword.Text);

            if (SqlServers.TestConnectionString(connectString) && SqlServers.HasCreatePermissions(connectString))
            {
                if (!string.IsNullOrWhiteSpace(txtDiskPath.Text) && !Directory.Exists(txtDiskPath.Text))
                {
                    error = true;
                    MessageBox.Show("The specified disk path does not exist.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
                    return(error);
                }

                try
                {
                    var setup = new InstallSetup()
                    {
                        MasterConnectionString = connectString,
                        NewDatabaseName        = txtCreationDatabaseName.Text,
                        DiskPath = txtDiskPath.Text.Trim(),
                    };
                    SqlServers.CreateDatabase(setup);
                }
                catch (Exception ex)
                {
                    error = true;
                    System.Diagnostics.Debug.WriteLine(ex.ToString());
                    MessageBox.Show("Could not create database." + Environment.NewLine + ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
                }
            }
            else
            {
                error = true;
                MessageBox.Show("The account does not have permissions to create a database on this server.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
            }
            return(error);
        }
Beispiel #9
0
        public void Run(InstallSettings settings)
        {
            //STEPS TO COPY DATABASE TO AZURE
            //1. Verify that target is a blank database
            //2. Execute only tables schemas with no defaults, relations, etc
            //3. Copy data with BCP one table at a time
            //4. Run full installer on the target database

            //1. Verify that target is a blank database
            if (!this.TargetIsBlank(settings))
            {
                throw new Exception("The target database must be empty!");
            }

            //2. Execute only tables schemas and PK with no defaults, relations, etc
            Assembly assem = Assembly.GetExecutingAssembly();

            string[] resourceNames = assem.GetManifestResourceNames();
            var      resourceName  = resourceNames.FirstOrDefault(x => x.EndsWith(".Create_Scripts.Generated.CreateSchema.sql"));

            if (string.IsNullOrEmpty(resourceName))
            {
                throw new Exception("Could not find the 'CreateSchema.sql' resource!");
            }

            var scripts = SqlServers.ReadSQLFileSectionsFromResource(resourceName, new InstallSetup());

            SqlConnection connection = null;

            try
            {
                connection = new SqlConnection(settings.GetCloudConnectionString());
                connection.Open();

                ////Create version table
                //var sb = new StringBuilder();
                //sb.AppendLine("if not exists(select * from sysobjects where name = '__nhydrateschema' and xtype = 'U')");
                //sb.AppendLine("BEGIN");
                //sb.AppendLine("CREATE TABLE [__nhydrateschema] (");
                //sb.AppendLine("[dbVersion] [varchar] (50) NOT NULL,");
                //sb.AppendLine("[LastUpdate] [datetime] NOT NULL,");
                //sb.AppendLine("[ModelKey] [uniqueidentifier] NOT NULL,");
                //sb.AppendLine("[History] [text] NOT NULL");
                //sb.AppendLine(")");
                //sb.AppendLine("--PRIMARY KEY FOR TABLE");
                //sb.AppendLine("if not exists(select * from sysobjects where name = '__pk__nhydrateschema' and xtype = 'PK')");
                //sb.AppendLine("ALTER TABLE [__nhydrateschema] WITH NOCHECK ADD CONSTRAINT [__pk__nhydrateschema] PRIMARY KEY CLUSTERED ([ModelKey])");
                //sb.AppendLine("END");
                //var command2 = new SqlCommand(sb.ToString(), connection);
                //command2.ExecuteNonQuery();

                foreach (string sql in scripts)
                {
                    if (
                        sql.Contains("--CREATE TABLE") ||
                        sql.Contains("--CREATE AUDIT TABLE") ||
                        sql.StartsWith("--APPEND AUDIT") ||
                        sql.StartsWith("--PRIMARY KEY FOR TABLE"))
                    {
                        var command = new SqlCommand(sql, connection);
                        command.ExecuteNonQuery();
                    }
                }
            }
            catch (Exception ex)
            {
                throw;
            }
            finally
            {
                if (connection != null)
                {
                    connection.Close();
                }
            }

            //3. Copy data with BCP one table at a time
            this.CopyData(settings);

            //4. Run full installer on the target database
            var setup = new InstallSetup()
            {
                ConnectionString = settings.GetCloudConnectionString(),
                InstallStatus    = InstallStatusConstants.Upgrade,
            };

            UpgradeInstaller.UpgradeDatabase(setup);
        }
Beispiel #10
0
        /// <summary>
        /// Performs an install of a database
        /// </summary>
        public override void Install(System.Collections.IDictionary stateSaver)
        {
            base.Install(stateSaver);

            var commandParams = GetCommandLineParameters();

            var paramUICount = 0;
            var setup        = new InstallSetup();

            if (commandParams.Count > 0)
            {
                if (commandParams.ContainsKey(PARAMKEYS_SHOWSQL))
                {
                    if (commandParams[PARAMKEYS_SHOWSQL].ToLower() == "true" || commandParams[PARAMKEYS_SHOWSQL].ToLower() == "1" || commandParams[PARAMKEYS_SHOWSQL].ToLower() == string.Empty)
                    {
                        setup.ShowSql = true;
                    }
                    else if (commandParams[PARAMKEYS_SHOWSQL].ToLower() == "false" || commandParams[PARAMKEYS_SHOWSQL].ToLower() == "0")
                    {
                        setup.ShowSql = false;
                    }
                    else
                    {
                        throw new Exception("The /" + PARAMKEYS_SHOWSQL + " parameter must be set to 'true or false'.");
                    }
                    paramUICount++;
                }

                if (commandParams.Any(x => PARAMKEYS_TRAN.Contains(x.Key)))
                {
                    setup.UseTransaction = GetSetting(commandParams, PARAMKEYS_TRAN, true);
                    paramUICount++;
                }

                if (commandParams.ContainsKey(PARAMKEYS_SKIPNORMALIZE))
                {
                    setup.SkipNormalize = true;
                    paramUICount++;
                }

                if (commandParams.ContainsKey(PARAMKEYS_HASH))
                {
                    if (commandParams[PARAMKEYS_HASH].ToLower() == "true" || commandParams[PARAMKEYS_HASH].ToLower() == "1" || commandParams[PARAMKEYS_HASH].ToLower() == string.Empty)
                    {
                        setup.UseHash = true;
                    }
                    else if (commandParams[PARAMKEYS_HASH].ToLower() == "false" || commandParams[PARAMKEYS_HASH].ToLower() == "0")
                    {
                        setup.UseHash = false;
                    }
                    else
                    {
                        throw new Exception("The /" + PARAMKEYS_HASH + " parameter must be set to 'true or false'.");
                    }
                    paramUICount++;
                }

                if (commandParams.ContainsKey(PARAMKEYS_CHECKONLY))
                {
                    setup.CheckOnly = true;
                    paramUICount++;
                }

                if (commandParams.ContainsKey(PARAMKEYS_QUIET))
                {
                    setup.SuppressUI = true;
                    paramUICount++;
                }

                //Setup trace if need be. If showing SQL then auto trace on
                if (commandParams.ContainsKey(PARAMKEYS_TRACE) || setup.ShowSql)
                {
                    var trc = new System.Diagnostics.TextWriterTraceListener(Console.Out);
                    System.Diagnostics.Debug.Listeners.Add(trc);
                    paramUICount++;
                }

                if (commandParams.ContainsKey(PARAMKEYS_VERSIONWARN))
                {
                    if (commandParams[PARAMKEYS_VERSIONWARN].ToLower() == "all")
                    {
                        setup.AcceptVersionWarningsChangedScripts = true;
                        setup.AcceptVersionWarningsNewScripts     = true;
                    }
                    else if (commandParams[PARAMKEYS_VERSIONWARN].ToLower() == "none")
                    {
                        setup.AcceptVersionWarningsChangedScripts = false;
                        setup.AcceptVersionWarningsNewScripts     = false;
                    }
                    else if (commandParams[PARAMKEYS_VERSIONWARN].ToLower() == "new")
                    {
                        setup.AcceptVersionWarningsNewScripts = true;
                    }
                    else if (commandParams[PARAMKEYS_VERSIONWARN].ToLower() == "changed")
                    {
                        setup.AcceptVersionWarningsChangedScripts = true;
                    }
                    else
                    {
                        throw new Exception("The /" + PARAMKEYS_VERSIONWARN + " parameter must be set to 'all, none, new, or changed'.");
                    }
                    paramUICount++;
                }

                if (GetSetting(commandParams, PARAMKEYS_HELP, false))
                {
                    ShowHelp();
                    return;
                }

                //Try to drop database
                if (commandParams.Any(x => PARAMKEYS_DROP.Contains(x.Key)))
                {
                    var masterConnectionString = GetSetting(commandParams, PARAMKEYS_MASTERDB, string.Empty);
                    var dbname = commandParams.Where(x => PARAMKEYS_NEWNAME.Contains(x.Key)).Select(x => x.Value).FirstOrDefault();
                    if (commandParams.Count == 3 && !string.IsNullOrEmpty(masterConnectionString))
                    {
                        if (!DropDatabase(dbname, masterConnectionString))
                        {
                            throw new Exception("The database '" + dbname + "' could not dropped.");
                        }
                        System.Diagnostics.Debug.WriteLine("Database successfully dropped.");
                        return;
                    }
                    throw new Exception("Invalid drop database configuration.");
                }

                setup.ConnectionString       = GetSetting(commandParams, PARAMKEYS_APPDB, string.Empty);
                setup.MasterConnectionString = GetSetting(commandParams, PARAMKEYS_MASTERDB, string.Empty);
                if (GetSetting(commandParams, PARAMKEYS_UPGRADE, setup.IsUpgrade))
                {
                    setup.InstallStatus = InstallStatusConstants.Upgrade;
                }
                if (commandParams.Any(x => PARAMKEYS_CREATE.Contains(x.Key)))
                {
                    setup.InstallStatus = InstallStatusConstants.Create;
                }

                if (commandParams.Any(x => PARAMKEYS_UPGRADE.Contains(x.Key)) && commandParams.Any(x => PARAMKEYS_CREATE.Contains(x.Key)))
                {
                    throw new Exception("You cannot specify both the create and update action.");
                }
                if (commandParams.Count(x => PARAMKEYS_NEWNAME.Contains(x.Key)) > 1)
                {
                    throw new Exception("The new database name was specified more than once.");
                }
                if (commandParams.Count(x => PARAMKEYS_MASTERDB.Contains(x.Key)) > 1)
                {
                    throw new Exception("The master database connection string was specified more than once.");
                }
                if (commandParams.Count(x => PARAMKEYS_APPDB.Contains(x.Key)) > 1)
                {
                    throw new Exception("The connection string was specified more than once.");
                }

                //Determine if calling as a script generator
                if (commandParams.ContainsKey(PARAMKEYS_SCRIPT))
                {
                    var scriptAction = commandParams[PARAMKEYS_SCRIPT].ToLower();
                    switch (scriptAction)
                    {
                    case "versioned":
                    case "unversioned":
                    case "create":
                        break;

                    default:
                        throw new Exception("The script action must be 'create', 'versioned', or 'unversioned'.");
                    }

                    if (!commandParams.ContainsKey(PARAMKEYS_SCRIPTFILE))
                    {
                        throw new Exception("The '" + PARAMKEYS_SCRIPTFILE + "' parameter must be set for script generation.");
                    }

                    var dumpFile = commandParams[PARAMKEYS_SCRIPTFILE];
                    if (!IsValidFileName(dumpFile))
                    {
                        throw new Exception("The '" + PARAMKEYS_SCRIPTFILE + "' parameter is not valid.");
                    }

                    var fileCreate = true;
                    if (commandParams.ContainsKey(PARAMKEYS_SCRIPTFILEACTION) && (commandParams[PARAMKEYS_SCRIPTFILEACTION] + string.Empty) == "append")
                    {
                        fileCreate = false;
                    }

                    if (File.Exists(dumpFile) && fileCreate)
                    {
                        File.Delete(dumpFile);
                        System.Threading.Thread.Sleep(500);
                    }

                    switch (scriptAction)
                    {
                    case "versioned":
                        if (commandParams.ContainsKey(PARAMKEYS_DBVERSION))
                        {
                            if (!GeneratedVersion.IsValid(commandParams[PARAMKEYS_DBVERSION]))
                            {
                                throw new Exception("The '" + PARAMKEYS_DBVERSION + "' parameter is not valid.");
                            }

                            setup.Version = new GeneratedVersion(commandParams[PARAMKEYS_DBVERSION]);
                        }
                        else
                        {
                            if (string.IsNullOrEmpty(setup.ConnectionString))
                            {
                                throw new Exception("Generation of versioned scripts requires a '" + PARAMKEYS_DBVERSION + "' parameter or valid connection string.");
                            }
                            else
                            {
                                var s = new nHydrateSetting();
                                s.Load(setup.ConnectionString);
                                setup.Version = new GeneratedVersion(s.dbVersion);
                            }
                        }

                        setup.InstallStatus = InstallStatusConstants.Upgrade;
                        File.AppendAllText(dumpFile, UpgradeInstaller.GetScript(setup));
                        break;

                    case "unversioned":
                        setup.InstallStatus = InstallStatusConstants.Upgrade;
                        setup.Version       = UpgradeInstaller._def_Version;
                        File.AppendAllText(dumpFile, UpgradeInstaller.GetScript(setup));
                        break;

                    case "create":
                        setup.InstallStatus = InstallStatusConstants.Create;
                        setup.Version       = new GeneratedVersion(-1, -1, -1, -1, -1);
                        File.AppendAllText(dumpFile, UpgradeInstaller.GetScript(setup));
                        break;
                    }

                    return;
                }

                //If we processed all parameters and they were UI then we need to show UI
                if ((paramUICount < commandParams.Count) || setup.SuppressUI)
                {
                    setup.NewDatabaseName = commandParams.Where(x => PARAMKEYS_NEWNAME.Contains(x.Key)).Select(x => x.Value).FirstOrDefault();
                    Install(setup);
                    return;
                }
            }

            UIInstall(setup);
        }