/// <summary>
///
/// </summary>
/// <param name="geometry"></param>
/// <param name="beWriter"></param>
protected void WriteFeatureHeader(Geometry geometry, BigEndianBinaryWriter beWriter)
{
// Write record number (big endian)
beWriter.WriteIntBE((int)++recordCounter);
// Write content length (big endian)
int contentLength = shapeWriter.GetBytesLength(geometry);
beWriter.WriteIntBE((int)(contentLength / 2)); // Write length in 16 bit words!
}
/// <summary>
///
/// </summary>
/// <param name="geometry"></param>
/// <param name="leWriter"></param>
/// <param name="beWriter"></param>
protected void Write(Geometry geometry, BinaryWriter leWriter, BigEndianBinaryWriter beWriter)
{
WriteFeatureHeader(geometry, beWriter);
if (geometry is Point)
shapeWriter.Write(geometry as Point, leWriter);
else if (geometry is LineString)
shapeWriter.Write(geometry as LineString, leWriter);
else if (geometry is Polygon)
shapeWriter.Write(geometry as Polygon, leWriter);
else if (geometry is MultiPoint)
shapeWriter.Write(geometry as MultiPoint, leWriter);
else if (geometry is MultiLineString)
shapeWriter.Write(geometry as MultiLineString, leWriter);
else if (geometry is MultiPolygon)
shapeWriter.Write(geometry as MultiPolygon, leWriter);
else throw new NotSupportedException("Unsupported Geometry implementation:" + geometry.GetType());
}
/// <summary>
/// Writes a shapefile header to the given stream;
/// </summary>
/// <param name="file">The binary writer to use.</param>
public void Write(BigEndianBinaryWriter file)
{
if (file == null)
{
throw new ArgumentNullException("file");
}
if (_fileLength == -1)
{
throw new InvalidOperationException("The header properties need to be set before writing the header record.");
}
int pos = 0;
file.WriteIntBE(_fileCode);
pos += 4;
for (int i = 0; i < 5; i++)
{
file.WriteIntBE(0); //Skip unused part of header
pos += 4;
}
file.WriteIntBE(_fileLength);
pos += 4;
file.Write(_version);
pos += 4;
file.Write(int.Parse(Enum.Format(typeof(ShapeGeometryTypes), _shapeType, "d")));
pos += 4;
// Write the bounding box
file.Write(_bounds.MinX);
file.Write(_bounds.MinY);
file.Write(_bounds.MaxX);
file.Write(_bounds.MaxY);
pos += 8 * 4;
// Skip remaining unused bytes
for (int i = 0; i < 4; i++)
{
file.Write(0.0); // Skip unused part of header
pos += 8;
}
}
/// <summary>
/// Writes an homogeneus <c>GometryCollection</c> into a binary stream.
/// </summary>
/// <param name="geometries"></param>
/// <param name="stream"></param>
protected void Write(GeometryCollection geometries, Stream stream)
{
if (!geometries.IsHomogeneous)
throw new ArgumentException("Shapefile does contain only geometries of th esame type!");
// Init counter
recordCounter = 0;
using (BigEndianBinaryWriter beWriter = new BigEndianBinaryWriter(stream))
{
using (BinaryWriter leWriter = new BinaryWriter(stream))
{
// Evaluate stream length
int fileLength = 0;
foreach (Geometry geometry in geometries.Geometries)
fileLength += (shapeWriter.GetBytesLength(geometry) + 8); // 12 is the length of record header
fileLength += 100; // Add main header
WriteHeaderFile(geometries, leWriter, beWriter, (int)(fileLength / 2)); // Write length in 16 bit words!
foreach (Geometry geometry in geometries.Geometries)
Write(geometry, leWriter, beWriter);
}
}
}
/// <summary>
/// Writes a shapefile to disk.
/// </summary>
/// <remarks>
/// Assumes the type given for the first geometry is the same for all subsequent geometries.
/// For example, is, if the first Geometry is a Multi-polygon/ Polygon, the subsequent geometies are
/// Muli-polygon/ polygon and not lines or points.
/// The dbase file for the corresponding shapefile contains one column called row. It contains
/// the row number.
/// </remarks>
/// <param name="filename">The filename to write to (minus the .shp extension).</param>
/// <param name="geometryCollection">The GeometryCollection to write.</param>
public void Write(string filename, IGeometryCollection geometryCollection)
{
System.IO.FileStream shpStream = new System.IO.FileStream(filename + ".shp", System.IO.FileMode.Create);
System.IO.FileStream shxStream = new System.IO.FileStream(filename + ".shx", System.IO.FileMode.Create);
BigEndianBinaryWriter shpBinaryWriter = new BigEndianBinaryWriter(shpStream);
BigEndianBinaryWriter shxBinaryWriter = new BigEndianBinaryWriter(shxStream);
// assumes
ShapeHandler handler = Shapefile.GetShapeHandler(Shapefile.GetShapeType(geometryCollection.Geometries[0]));
IGeometry body;
int numShapes = geometryCollection.NumGeometries;
// calc the length of the shp file, so it can put in the header.
int shpLength = 50;
for (int i = 0; i < numShapes; i++)
{
body = (IGeometry) geometryCollection.Geometries[i];
shpLength += 4; // length of header in WORDS
shpLength += handler.GetLength(body); // length of shape in WORDS
}
int shxLength = 50 + (4*numShapes);
// write the .shp header
ShapefileHeader shpHeader = new ShapefileHeader();
shpHeader.FileLength = shpLength;
// get envelope in external coordinates
IEnvelope env = geometryCollection.EnvelopeInternal;
IEnvelope bounds = ShapeHandler.GetEnvelopeExternal(geometryFactory.PrecisionModel, env);
shpHeader.Bounds = bounds;
// assumes Geometry type of the first item will the same for all other items
// in the collection.
shpHeader.ShapeType = Shapefile.GetShapeType(geometryCollection.Geometries[0]);
shpHeader.Write(shpBinaryWriter);
// write the .shx header
ShapefileHeader shxHeader = new ShapefileHeader();
shxHeader.FileLength = shxLength;
shxHeader.Bounds = shpHeader.Bounds;
// assumes Geometry type of the first item will the same for all other items in the collection.
shxHeader.ShapeType = Shapefile.GetShapeType(geometryCollection.Geometries[0]);
shxHeader.Write(shxBinaryWriter);
// write the individual records.
int _pos = 50; // header length in WORDS
for (int i = 0; i < numShapes; i++)
{
body = geometryCollection.Geometries[i];
int recordLength = handler.GetLength(body);
shpBinaryWriter.WriteIntBE(i+1);
shpBinaryWriter.WriteIntBE(recordLength);
shxBinaryWriter.WriteIntBE(_pos);
shxBinaryWriter.WriteIntBE(recordLength);
_pos += 4; // length of header in WORDS
handler.Write(body, shpBinaryWriter, geometryFactory);
_pos += recordLength; // length of shape in WORDS
}
shxBinaryWriter.Flush();
shxBinaryWriter.Close();
shpBinaryWriter.Flush();
shpBinaryWriter.Close();
// WriteDummyDbf(filename + ".dbf", numShapes);
}
/// <summary>
///
/// </summary>
/// <param name="geometries"></param>
/// <param name="beWriter">Big Endian Writer</param>
/// <param name="leWriter">Little Endian Endian Writer</param>
/// <param name="streamLength"></param>
protected void WriteHeaderFile(GeometryCollection geometries, BinaryWriter leWriter, BigEndianBinaryWriter beWriter, int streamLength)
{
// Write stub value for FileCode (big endian)
beWriter.WriteIntBE((int)9994);
// Write stub values for unused (big endian)
beWriter.WriteIntBE((int)0);
beWriter.WriteIntBE((int)0);
beWriter.WriteIntBE((int)0);
beWriter.WriteIntBE((int)0);
beWriter.WriteIntBE((int)0);
// Write stub value for Length (big endian)
beWriter.WriteIntBE((int)streamLength);
// Write version
leWriter.Write((int)1000);
// Write ShapeTipe
leWriter.Write((int)GetShapeType((Geometry)geometries.Geometries[0]));
// Write values for boundingbox
Envelope envelope = (Envelope)geometries.EnvelopeInternal;
leWriter.Write((double)envelope.MinX);
leWriter.Write((double)envelope.MinY);
leWriter.Write((double)envelope.MaxX);
leWriter.Write((double)envelope.MaxY);
leWriter.Write((double)0);
leWriter.Write((double)0);
leWriter.Write((double)0);
leWriter.Write((double)0);
}
/// <summary>
/// Writes a shapefile to disk.
/// </summary>
/// <remarks>
/// Assumes the type given for the first geometry is the same for all subsequent geometries.
/// For example, is, if the first Geometry is a Multi-polygon/ Polygon, the subsequent geometies are
/// Muli-polygon/ polygon and not lines or points.
/// The dbase file for the corresponding shapefile contains one column called row. It contains
/// the row number.
/// </remarks>
/// <param name="filename">The filename to write to (minus the .shp extension).</param>
/// <param name="geometryCollection">The GeometryCollection to write.</param>
public void Write(string filename, IGeometryCollection geometryCollection)
{
System.IO.FileStream shpStream = new System.IO.FileStream(filename + ".shp", System.IO.FileMode.Create);
System.IO.FileStream shxStream = new System.IO.FileStream(filename + ".shx", System.IO.FileMode.Create);
BigEndianBinaryWriter shpBinaryWriter = new BigEndianBinaryWriter(shpStream);
BigEndianBinaryWriter shxBinaryWriter = new BigEndianBinaryWriter(shxStream);
// assumes
ShapeHandler handler = Shapefile.GetShapeHandler(Shapefile.GetShapeType(geometryCollection.Geometries[0]));
IGeometry body;
int numShapes = geometryCollection.NumGeometries;
// calc the length of the shp file, so it can put in the header.
int shpLength = 50;
for (int i = 0; i < numShapes; i++)
{
body = (IGeometry)geometryCollection.Geometries[i];
shpLength += 4; // length of header in WORDS
shpLength += handler.GetLength(body); // length of shape in WORDS
}
int shxLength = 50 + (4 * numShapes);
// write the .shp header
ShapefileHeader shpHeader = new ShapefileHeader();
shpHeader.FileLength = shpLength;
// get envelope in external coordinates
IEnvelope env = geometryCollection.EnvelopeInternal;
IEnvelope bounds = ShapeHandler.GetEnvelopeExternal(geometryFactory.PrecisionModel, env);
shpHeader.Bounds = bounds;
// assumes Geometry type of the first item will the same for all other items
// in the collection.
shpHeader.ShapeType = Shapefile.GetShapeType(geometryCollection.Geometries[0]);
shpHeader.Write(shpBinaryWriter);
// write the .shx header
ShapefileHeader shxHeader = new ShapefileHeader();
shxHeader.FileLength = shxLength;
shxHeader.Bounds = shpHeader.Bounds;
// assumes Geometry type of the first item will the same for all other items in the collection.
shxHeader.ShapeType = Shapefile.GetShapeType(geometryCollection.Geometries[0]);
shxHeader.Write(shxBinaryWriter);
// write the individual records.
int _pos = 50; // header length in WORDS
for (int i = 0; i < numShapes; i++)
{
body = geometryCollection.Geometries[i];
int recordLength = handler.GetLength(body);
shpBinaryWriter.WriteIntBE(i + 1);
shpBinaryWriter.WriteIntBE(recordLength);
shxBinaryWriter.WriteIntBE(_pos);
shxBinaryWriter.WriteIntBE(recordLength);
_pos += 4; // length of header in WORDS
handler.Write(body, shpBinaryWriter, geometryFactory);
_pos += recordLength; // length of shape in WORDS
}
shxBinaryWriter.Flush();
shxBinaryWriter.Close();
shpBinaryWriter.Flush();
shpBinaryWriter.Close();
// WriteDummyDbf(filename + ".dbf", numShapes);
}
/// <summary>
/// Writes a shapefile header to the given stream;
/// </summary>
/// <param name="file">The binary writer to use.</param>
public void Write(BigEndianBinaryWriter file)
{
if (file == null)
throw new ArgumentNullException("file");
if (_fileLength==-1)
throw new InvalidOperationException("The header properties need to be set before writing the header record.");
int pos = 0;
file.WriteIntBE(_fileCode);
pos += 4;
for (int i = 0; i < 5; i++)
{
file.WriteIntBE(0);//Skip unused part of header
pos += 4;
}
file.WriteIntBE(_fileLength);
pos += 4;
file.Write(_version);
pos += 4;
file.Write(int.Parse(Enum.Format(typeof(ShapeGeometryType), _shapeType, "d")));
pos += 4;
// Write the bounding box
file.Write(_bounds.MinX);
file.Write(_bounds.MinY);
file.Write(_bounds.MaxX);
file.Write(_bounds.MaxY);
pos += 8 * 4;
// Skip remaining unused bytes
for (int i = 0; i < 4; i++)
{
file.Write(0.0); // Skip unused part of header
pos += 8;
}
}
/// <summary>
///
/// </summary>
/// <param name="geometry"></param>
/// <param name="beWriter"></param>
protected void WriteFeatureHeader(Geometry geometry, BigEndianBinaryWriter beWriter)
{
// Write record number (big endian)
beWriter.WriteIntBE((int)++recordCounter);
// Write content length (big endian)
int contentLength = shapeWriter.GetBytesLength(geometry);
beWriter.WriteIntBE((int)(contentLength / 2)); // Write length in 16 bit words!
}
/// <summary>
///
/// </summary>
/// <param name="geometries"></param>
/// <param name="beWriter">Big Endian Writer</param>
/// <param name="leWriter">Little Endian Endian Writer</param>
/// <param name="streamLength"></param>
protected void WriteHeaderFile(GeometryCollection geometries, BinaryWriter leWriter, BigEndianBinaryWriter beWriter, int streamLength)
{
// Write stub value for FileCode (big endian)
beWriter.WriteIntBE((int) 9994);
// Write stub values for unused (big endian)
beWriter.WriteIntBE((int) 0);
beWriter.WriteIntBE((int) 0);
beWriter.WriteIntBE((int) 0);
beWriter.WriteIntBE((int) 0);
beWriter.WriteIntBE((int) 0);
// Write stub value for Length (big endian)
beWriter.WriteIntBE((int) streamLength);
// Write version
leWriter.Write((int) 1000);
// Write ShapeTipe
leWriter.Write((int) GetShapeType((Geometry) geometries.Geometries[0]));
// Write values for boundingbox
Envelope envelope = (Envelope) geometries.EnvelopeInternal;
leWriter.Write((double) envelope.MinX);
leWriter.Write((double) envelope.MinY);
leWriter.Write((double) envelope.MaxX);
leWriter.Write((double) envelope.MaxY);
leWriter.Write((double) 0);
leWriter.Write((double) 0);
leWriter.Write((double) 0);
leWriter.Write((double) 0);
}