protected override void OnMouseMove(object sender, MouseEventArgs e)
{
base.OnMouseMove(sender, e);
GridVector2 WorldPosition = Parent.ScreenToWorld(e.X, e.Y);
//Check if we should start a rectangle
if (e.Button == MouseButtons.Left && oldMouse.Button != MouseButtons.Left)
{
this.rectangle = new GridRectangle(WorldPosition, 0, 0);
}
else if (e.Button == MouseButtons.Left)
{
if (WorldPosition.Y < this.rectangle.Bottom)
this.rectangle.Bottom = WorldPosition.Y;
else
this.rectangle.Top = WorldPosition.Y;
if (WorldPosition.X < this.rectangle.Left)
this.rectangle.Left = WorldPosition.X;
else
this.rectangle.Right = WorldPosition.X;
}
//If the mouse was released we stop drawing rectangle
else if (e.Button != MouseButtons.Left && oldMouse.Button == MouseButtons.Left)
{
this.CommandActive = false;
}
}
public GridTransform(SerializationInfo info, StreamingContext context)
{
_mapPoints = info.GetValue("_mapPoints", typeof(MappingGridVector2[])) as MappingGridVector2[];
_TriangleIndiciesCache = info.GetValue("_TriangleIndiciesCache", typeof(int[])) as int[];
_CachedMappedBounds = (GridRectangle)info.GetValue("_CachedMappedBounds", typeof(GridRectangle));
_CachedControlBounds = (GridRectangle)info.GetValue("_CachedControlBounds", typeof(GridRectangle));
LastModified = info.GetDateTime("LastModified");
}
public override TilePyramid VisibleTiles(GridRectangle VisibleBounds, double DownSample)
{
int roundedDownsample = NearestAvailableLevel(DownSample);
GridQuad VisibleQuad = null;
//Add any corners of the VisibleBounds that we can transform to the list of points
List<MappingGridVector2> VisiblePoints = VisibleBoundsCorners(VolumeTransform, VisibleBounds);
if (VisiblePoints.Count != 4)
{
//If we can't map all four corners then add all the points from the transform falling inside the visible rectangle or
//connected to those points by an edge
List<MappingGridVector2> listTransformPoints = this.VolumeTransform.IntersectingControlRectangle(VisibleBounds, true);
VisiblePoints.AddRange(listTransformPoints);
}
else
{
VisiblePoints.Sort(new MappingGridVector2SortByMapPoints());
VisibleQuad = new GridQuad(VisiblePoints[0].MappedPoint,
VisiblePoints[1].MappedPoint,
VisiblePoints[2].MappedPoint,
VisiblePoints[3].MappedPoint);
}
//OK, transform all points falling inside the section border
//Starting with low-res tiles, add tiles to the list until we reach desired resolution
//List<Tile> TilesToDraw = new List<Tile>();
TilePyramid TilesToDraw = new TilePyramid(VisibleBounds);
if (VisiblePoints.Count < 3)
return TilesToDraw;
GridRectangle SectionBorder = MappingGridVector2.CalculateMappedBounds(VisiblePoints.ToArray());
int iLevel = AvailableLevels.Length - 1;
int level = AvailableLevels[iLevel];
do
{
List<Tile> newTiles = RecursiveVisibleTiles(VisibleBounds,
SectionBorder,
VisibleQuad,
level
//PORT: AsynchTextureLoad
);
//Insert at the beginning so we overwrite earlier tiles with poorer resolution
TilesToDraw.AddTiles(level, newTiles.ToArray());
iLevel--;
if (iLevel >= 0)
level = AvailableLevels[iLevel];
}
while (level >= roundedDownsample && iLevel >= 0);
// Trace.WriteLine("Drawing " + TilesToDraw.Count.ToString() + " Tiles", "VolumeModel");
return TilesToDraw;
}
public static int[] Triangulate(GridVector2[] points, GridRectangle bounds)
{
double WidthMargin = bounds.Width;
double HeightMargin = bounds.Height;
GridVector2[] BoundingPoints = new GridVector2[] { new GridVector2(bounds.Left - WidthMargin, bounds.Bottom - HeightMargin),
new GridVector2(bounds.Right + WidthMargin, bounds.Bottom - HeightMargin),
new GridVector2(bounds.Left - WidthMargin, bounds.Top + HeightMargin),
new GridVector2(bounds.Right + WidthMargin, bounds.Top + HeightMargin)};
return Delaunay.Triangulate(points, BoundingPoints);
}
public ScreenshotForm(GridRectangle myRect, double Downsample, int Z)
{
this._Z = Z;
this.Rect = myRect;
ViewerDownsample = Downsample;
if (ScreenshotForm.UseViewerDownsampleChecked)
this.Downsample = Downsample;
else
this.Downsample = ScreenshotForm.LastDownsampleValue;
InitializeComponent();
}
public void TestGridRectangle()
{
GridRectangle rectA = new GridRectangle(10, 50, 20, 40);
bool success = rectA.Contains(new GridVector2(10, 20));
Debug.Assert(success);
success = rectA.Contains(new GridVector2(50, 40));
Debug.Assert(success);
success = rectA.Contains(rectA.Center);
Debug.Assert(success);
GridRectangle rectBOverlaps = new GridRectangle(5, 15, 10, 21);
success = rectA.Intersects(rectBOverlaps);
Debug.Assert(success);
success = rectA.Contains(rectBOverlaps);
Debug.Assert(false == success);
GridRectangle rectCNoOverlap = new GridRectangle(5, 15, 10, 19);
success = rectA.Intersects(rectCNoOverlap);
Debug.Assert(false == success);
success = rectA.Contains(rectBOverlaps);
Debug.Assert(false == success);
GridRectangle rectDContained = new GridRectangle(15, 45, 25, 35);
success = rectA.Intersects(rectDContained);
Debug.Assert(success);
success = rectA.Contains(rectDContained);
Debug.Assert(success);
/*Scale the rectangle and test again*/
rectA.Scale(2);
Debug.Assert(-10.0 == rectA.Left &&
70 == rectA.Right &&
10 == rectA.Bottom &&
50 == rectA.Top);
/*Scale the rectangle and test again*/
rectA.Scale(0.5);
Debug.Assert(10.0 == rectA.Left &&
50 == rectA.Right &&
20 == rectA.Bottom &&
40 == rectA.Top);
}
public ICollection<Location_CanvasViewModel> GetLocations(GridRectangle bounds)
{
List<GridVector2> foundPoints;
List<Location_CanvasViewModel> foundLocations;
Locations.Intersect(bounds, out foundPoints, out foundLocations);
return foundLocations;
}
public bool Union(GridRectangle rect)
{
return this.Union(rect.LowerLeft) || this.Union(rect.UpperRight);
}
public static List<MappingGridVector2> ParseRotateTranslateAffineTransform(string[] parts,
float pixelSpacing,
int iFixedParameters,
int iVariableParameters,
GridRectangle MappedBounds,
GridRectangle ControlBounds)
{
//Find the dimensions of the grid
List<MappingGridVector2> mappings = new List<MappingGridVector2>();
/*
GridVector2[] Points = new GridVector2[4];
GridVector2[] mappedPoints = new GridVector2[4];
GridVector2[] ctrlPoints = new GridVector2[4];
Points[0] = new GridVector2(0, 0);
Points[1] = new GridVector2(MappedBounds.Width, 0);
Points[2] = new GridVector2(0, MappedBounds.Height);
Points[3] = new GridVector2(MappedBounds.Width, MappedBounds.Height);
ctrlPoints[0] = new GridVector2(0, 0);
ctrlPoints[1] = new GridVector2(ControlBounds.Width, 0);
ctrlPoints[2] = new GridVector2(0, ControlBounds.Height);
ctrlPoints[3] = new GridVector2(ControlBounds.Width, ControlBounds.Height);
Matrix mat = Matrix.Identity;
mat.M11 = System.Convert.ToSingle(parts[iVariableParameters + 2]);
mat.M12 = System.Convert.ToSingle(parts[iVariableParameters + 3]);
mat.M21 = System.Convert.ToSingle(parts[iVariableParameters + 4]);
mat.M22 = System.Convert.ToSingle(parts[iVariableParameters + 5]);
//Cheating: since the rotation matrix is
//[cos(t) -sin(t)]
//[sin(t) cos(t)]
//we just take the asin of the parameter to find the rotation value
// double theta = Math.Acos(System.Convert.ToSingle(parts[iVariableParameters + 2]));
//Matrix mat = Matrix.CreateRotationZ((float)theta);
mappedPoints[0] = Vector2.Transform(Points[0], mat);
mappedPoints[1] = Vector2.Transform(Points[1], mat);
mappedPoints[2] = Vector2.Transform(Points[2], mat);
mappedPoints[3] = Vector2.Transform(Points[3], mat);
Triangle controlOne = new Triangle(ctrlPoints[0], ctrlPoints[1], ctrlPoints[2]);
Triangle controlTwo = new Triangle(ctrlPoints[2], ctrlPoints[1], ctrlPoints[3]);
Triangle mappedOne = new Triangle(mappedPoints[0], mappedPoints[1], mappedPoints[2]);
Triangle mappedTwo = new Triangle(mappedPoints[2], mappedPoints[1], mappedPoints[3]);
mappings.Add(new MappingTriangle(controlOne, mappedOne));
mappings.Add(new MappingTriangle(controlTwo, mappedTwo));
*/
return mappings;
}
/// <summary>
/// Returns true if the passed rectangle is entirely inside this rectangle
/// </summary>
/// <param name="rect"></param>
/// <returns></returns>
public bool Contains(GridRectangle rect)
{
//Find out if rect is inside this rectangle
if (rect.Right <= this.Right &&
rect.Top <= this.Top &&
rect.Left >= this.Left &&
rect.Bottom >= this.Bottom)
return true;
return false;
}
/// <summary>
/// Returns true if the passed rectangle in inside or overlaps this rectangle
/// </summary>
/// <param name="rect"></param>
/// <returns></returns>
public bool Intersects(GridRectangle rect)
{
//Find out if the rectangles can't possibly intersect
if(rect.Right < this.Left ||
rect.Top < this.Bottom ||
rect.Left > this.Right ||
rect.Bottom > this.Top)
return false;
return true;
}
/// <summary>
/// Takes a capture and sends it to the clipboard
/// </summary>
protected Microsoft.Xna.Framework.Graphics.PackedVector.Byte4[] CaptureArea(GridRectangle Rect, float Downsample)
{
Debug.Assert((Rect.Width / Downsample) < 4096 && (Rect.Height / Downsample) < 4096);
Debug.Assert(this.PaintCallRefCount == 0);
// Vector3 OriginalCameraLookAt = this.Camera.LookAt;
//float OriginalCameraDistance = this.CameraDistance;
// Rectangle OriginalVisibleRect = this.VisibleScreenRect;
int Width = (int)Math.Round(Rect.Width / Downsample);
int Height = (int)Math.Round(Rect.Height / Downsample);
Microsoft.Xna.Framework.Graphics.PackedVector.Byte4[] data = new Microsoft.Xna.Framework.Graphics.PackedVector.Byte4[Width * Height];
try
{
// Initialize our RenderTarget
ScreenshotRenderTarget = new RenderTarget2D(Device,
Width,
Height,
false,
SurfaceFormat.Color,
DepthFormat.Depth24Stencil8);
Device.SetRenderTarget(ScreenshotRenderTarget);
bool OldAsynchTextureLoad = AsynchTextureLoad;
AsynchTextureLoad = false;
// Draw(Downsample);
AsynchTextureLoad = OldAsynchTextureLoad;
Device.SetRenderTarget(null);
data = new Microsoft.Xna.Framework.Graphics.PackedVector.Byte4[ScreenshotRenderTarget.Width * ScreenshotRenderTarget.Height];
ScreenshotRenderTarget.GetData<Microsoft.Xna.Framework.Graphics.PackedVector.Byte4>(data);
// Draw();
}
finally
{
Device.SetRenderTarget(null);
if (ScreenshotRenderTarget != null)
{
ScreenshotRenderTarget.Dispose();
ScreenshotRenderTarget = null;
}
// this.CameraLookAt = OriginalCameraLookAt;
// this.CameraDistance = OriginalCameraDistance;
}
return data;
}
protected override void OnMouseMove(object sender, MouseEventArgs e)
{
//Figure out if we are starting a rectangle
if (e.Button == MouseButtons.Left && this.CommandActive)
{
GridVector2 NewPosition = Parent.ScreenToWorld(e.X, e.Y);
double Width = NewPosition.X - Origin.X;
double Height = NewPosition.Y - Origin.Y;
if (Width != 0 && Height != 0)
{
MyRect = new GridRectangle(Origin, Width, Height);
this.Color = Color.Red;
this.Parent.Refresh();
}
}
base.OnMouseMove(sender, e);
}
/// <summary>
/// Allocates a new quad tree based on the current section parameters
/// </summary>
public static GridRectangle SectionBounds(Viking.UI.Controls.SectionViewerControl Parent, int SectionNumber)
{
GridRectangle bounds = new GridRectangle();
//Figure out the new boundaries for our quad-tree
if(!Parent.Section.VolumeViewModel.SectionViewModels.ContainsKey(SectionNumber))
return new GridRectangle();
SectionViewModel SectionView = Parent.Section.VolumeViewModel.SectionViewModels[SectionNumber];
bounds = Parent.SectionBounds(SectionView.section);
if (SectionView.ReferenceSectionAbove != null)
{
bounds = GridRectangle.Union(bounds, Parent.SectionBounds(SectionView.ReferenceSectionAbove));
}
if (SectionView.ReferenceSectionBelow != null)
{
bounds = GridRectangle.Union(bounds, Parent.SectionBounds(SectionView.ReferenceSectionBelow));
}
return bounds;
}
/// <summary>
/// Maps the provided visible bounds in volume space back to section space with the provided transform.
/// </summary>
/// <param name="transform"></param>
/// <param name="VisibleBounds"></param>
/// <returns></returns>
protected List<MappingGridVector2> VisibleBoundsCorners(Geometry.Transforms.TransformBase transform, GridRectangle VisibleBounds)
{
List<MappingGridVector2> listBoundCorners = new List<MappingGridVector2>(4);
//Add any corners of the VisibleBounds that we can transform to the list of points
bool transformSuccess = false;
GridVector2 TLowerLeft;
GridVector2 TLowerRight;
GridVector2 TUpperLeft;
GridVector2 TUpperRight;
transformSuccess = transform.TryInverseTransform(VisibleBounds.LowerLeft, out TLowerLeft);
if(transformSuccess)
listBoundCorners.Add(new MappingGridVector2(VisibleBounds.LowerLeft, TLowerLeft));
//Add any corners of the VisibleBounds that we can transform to the list of points
transformSuccess = transform.TryInverseTransform(VisibleBounds.LowerRight, out TLowerRight);
if(transformSuccess)
listBoundCorners.Add(new MappingGridVector2(VisibleBounds.LowerRight, TLowerRight));
transformSuccess = transform.TryInverseTransform(VisibleBounds.UpperLeft, out TUpperLeft);
if(transformSuccess)
listBoundCorners.Add(new MappingGridVector2(VisibleBounds.UpperLeft, TUpperLeft));
transformSuccess = transform.TryInverseTransform(VisibleBounds.UpperRight, out TUpperRight);
if(transformSuccess)
listBoundCorners.Add(new MappingGridVector2(VisibleBounds.UpperRight, TUpperRight));
return listBoundCorners;
}
/// <summary>
/// Returns all points inside the requested region.
/// If include adjacent is set to true we include points with an edge that crosses the border of the requested rectangle
/// </summary>
/// <param name="gridRect"></param>
/// <returns></returns>
private List<MappingGridVector2> IntersectingRectangle(GridRectangle gridRect,
QuadTree<List<MappingGridTriangle>> PointTree)
{
List<GridVector2> Points;
List<List<MappingGridTriangle>> ListofListTriangles;
List<MappingGridVector2> MappingPointList= null;
if (gridRect.Contains(PointTree.Border))
{
MappingPointList = new List<MappingGridVector2>(_mapPoints);
return MappingPointList;
}
PointTree.Intersect(gridRect, out Points, out ListofListTriangles);
bool[] Added = new bool[_mapPoints.Length];
MappingPointList = new List<MappingGridVector2>(Points.Count * 2);
List<List<MappingGridTriangle>> MappingTriangleList = new List<List<MappingGridTriangle>>(Points.Count * 2);
//Add all the unique points bordering the requested rectangle
for (int iPoint = 0; iPoint < Points.Count; iPoint++)
{
List<MappingGridTriangle> FoundTriangleList = ListofListTriangles[iPoint];
for (int iTri = 0; iTri < FoundTriangleList.Count; iTri++)
{
MappingGridTriangle Triangle = FoundTriangleList[iTri];
if (!Added[Triangle.N1])
{
Added[Triangle.N1] = true;
MappingPointList.Add(this._mapPoints[Triangle.N1]);
MappingTriangleList.Add(this._TriangleList[Triangle.N1]);
}
if (!Added[Triangle.N2])
{
Added[Triangle.N2] = true;
MappingPointList.Add(this._mapPoints[Triangle.N2]);
MappingTriangleList.Add(this._TriangleList[Triangle.N1]);
}
if (!Added[Triangle.N3])
{
Added[Triangle.N3] = true;
MappingPointList.Add(this._mapPoints[Triangle.N3]);
MappingTriangleList.Add(this._TriangleList[Triangle.N1]);
}
}
}
return MappingPointList;
}
/// <summary>
/// Takes two transforms and transforms the control grid of this section into the control grid space of the passed transfrom. Requires control section
/// of this transform to match mapped section of adding transform
/// </summary>
public void Add(GridTransform transform)
{
//We can't map if we don't have a triangle
if (transform.mapPoints.Length < 3)
return;
//Temp: Ensure we know the edges
this.CalculateEdges();
transform.BuildDataStructures();
//Reset boundaries since they will be changed
_CachedControlBounds = new GridRectangle(double.MinValue, double.MinValue, 0, 0);
_CachedMappedBounds = new GridRectangle(double.MinValue, double.MinValue, 0, 0);
List<AddTransformThreadObj> threadObjList = new List<AddTransformThreadObj>();
List<ManualResetEvent> doneEvents = new List<ManualResetEvent>();
List<MappingGridVector2> newPoints = new List<MappingGridVector2>(mapPoints.Length);
#if DEBUG
List<GridVector2> mapPointList = new List<GridVector2>(newPoints.Count);
#endif
// Trace.WriteLine("Starting with " + mapPoints.Length + " points", "Geometry");
// List<MappingGridVector2> newPoints = new List<MappingGridVector2>();
// Trace.WriteLine("Started GridTransform.Add with " + mapPoints.Length.ToString() + " points", "Geometry");
//Search all mapping triangles and update control points, if they fall outside the grid then discard the triangle
const int PointsPerThread = 4;
for (int iPoint = 0; iPoint < this.mapPoints.Length; iPoint += PointsPerThread )
{
//Create a series of points for the thread to process so they aren't constantly hitting the queue lock looking for new work.
List<int> listPoints = new List<int>(PointsPerThread);
for (int iAddPoint = iPoint; iAddPoint < iPoint + PointsPerThread; iAddPoint++)
{
//Don't add if the point is out of range
if (iAddPoint >= this.mapPoints.Length)
break;
listPoints.Add(iAddPoint);
}
//MappingGridVector2 mapPoint = mapPoints[iPoint];
AddTransformThreadObj AddThreadObj = new AddTransformThreadObj(listPoints.ToArray(), this, transform);
doneEvents.Add(AddThreadObj.DoneEvent);
threadObjList.Add(AddThreadObj);
/*
MappingGridVector2 UnmappedPoint = mapPoints[iPoint];
MappingGridTriangle mapTri = transform.GetTransform(mapPoints[iPoint].ControlPoint);
if (mapTri != null)
{
GridVector2 newControl = mapTri.Transform(UnmappedPoint.ControlPoint);
newPoints.AddRange(new MappingGridVector2[] { new MappingGridVector2(newControl, UnmappedPoint.MappedPoint) });
List<MappingGridVector2> sortPoints = new List<MappingGridVector2>(newPoints);
sortPoints.Sort();
for (int i = 1; i < sortPoints.Count; i++)
{
Debug.Assert(sortPoints[i - 1].ControlPoint != sortPoints[i].ControlPoint);
}
}
else
{
//In this case we need to test each edge connecting this point to other points.
//newPoints = new MappingGridVector2[0];
for(int i = 0; i < TriangleIndicies.Length; i += 3)
{
if(TriangleIndicies[i] == iPoint)
{
int[] EdgesIndicies = Array.Find<int>(this.TriangleIndicies, iPoint);
}
*/
//For single threaded debug, comment out threadpool and uncomment AddThreadObj.ThreadPoolCallback line
ThreadPool.QueueUserWorkItem(AddThreadObj.ThreadPoolCallback);
// AddThreadObj.ThreadPoolCallback(null);
//newPoints.AddRange(AddThreadObj.newPoints);
//newPoints.Sort();
#if false
for (int iTest = 1; iTest < newPoints.Count; iTest++)
{
Debug.Assert(newPoints[iTest - 1].ControlPoint != newPoints[iTest].ControlPoint);
}
for (int iMap = 0; iMap < AddThreadObj.newPoints.Length; iMap++)
{
mapPointList.Add(AddThreadObj.newPoints[iMap].MappedPoint);
}
mapPointList.Sort();
for (int iMap = 1; iMap < mapPointList.Count; iMap++)
{
Debug.Assert(GridVector2.Distance(mapPointList[iMap], mapPointList[iMap - 1]) > Global.epsilon);
}
#endif
}
//Wait for the threads to finish processing. There is a 64 handle limit for WaitAll so we wait on one at a time
foreach (ManualResetEvent doneEvent in doneEvents)
doneEvent.WaitOne();
newPoints.Clear();
foreach(AddTransformThreadObj obj in threadObjList)
{
if(obj.newPoints != null)
newPoints.AddRange(obj.newPoints);
}
// Trace.WriteLine("Mapped " + newPoints.Count + " points", "Geometry");
#if false
mapPointList.Clear();
for (int iMap = 0; iMap < newPoints.Count; iMap++)
{
mapPointList.Add(newPoints[iMap].MappedPoint);
}
mapPointList.Sort();
for (int iMap = 1; iMap < mapPointList.Count; iMap++)
{
Debug.Assert(GridVector2.Distance(mapPointList[iMap], mapPointList[iMap - 1]) > Global.epsilon);
}
#endif
//Remove duplicates: In the case that a line on the warpingGrid passes through a point on the fixedGrid then both ends of the line will map the point and we will get a duplicate
newPoints.Sort();
int iCompareStart = 0;
for (int iTest = 1; iTest < newPoints.Count; iTest++)
{
// Debug.Assert(newPoints[iTest - 1].ControlPoint != newPoints[iTest].ControlPoint);
//This is slow, but even though we sort on the X axis it doesn't mean a point that is not adjacent to the point on the list isn't too close
for (int jTest = iCompareStart; jTest < iTest; jTest++)
{
if (GridVector2.Distance(newPoints[jTest].ControlPoint, newPoints[iTest].ControlPoint) <= Global.Epsilon)
{
newPoints.RemoveAt(iTest);
iTest--;
break;
}
//Optimization, since the array is sorted we don't need to compare points once a point is distant enough
if (newPoints[iTest].ControlPoint.X - newPoints[jTest].ControlPoint.X > Global.Epsilon)
{
iCompareStart = jTest;
}
}
}
// Trace.WriteLine("Ended with " + newPoints.Count + " points", "Geometry");
this.mapPoints = newPoints.ToArray();
//Edges are build on mapPoints, so we need to remove them so they'll be recalculates
_edges = null;
//Other datastructures are dependent on edges, so minimize memory will delete them
MinimizeMemory();
// Trace.WriteLine("Finished GridTransform.Add with " + newPoints.Count.ToString() + " points", "Geometry");
//Check whether these have been set yet or if I don't need to clear them again
this.ControlSection = transform.ControlSection;
}
private void btnOK_Click(object sender, EventArgs e)
{
double ROIWidth = (double)this.numWidth.Value * this.Downsample;
double ROIHeight = (double)this.numHeight.Value * this.Downsample;
this.Rect = new GridRectangle(new GridVector2((double)this.numX.Value - ROIWidth / 2,
(double)this.numY.Value - ROIHeight / 2),
ROIWidth,
ROIHeight);
ScreenshotForm.LastDownsampleValue = this.Downsample;
this.IncludeOverlays = this.checkOverlays.Checked;
//Write down the filename and remove the automatically appended number if needed
ScreenshotForm.LastFileNamePrefix = System.IO.Path.GetFileNameWithoutExtension(textFilename.Text);
string CaptureNumberString = "_" + ScreenshotForm.NextCaptureNumber.ToString("d03");
if (ScreenshotForm.LastFileNamePrefix.EndsWith(CaptureNumberString))
{
int i = ScreenshotForm.LastFileNamePrefix.LastIndexOf(CaptureNumberString);
ScreenshotForm.LastFileNamePrefix = ScreenshotForm.LastFileNamePrefix.Remove(i);
}
ScreenshotForm.LastFileNamePrefix = System.IO.Path.GetDirectoryName(textFilename.Text) +
System.IO.Path.DirectorySeparatorChar +
ScreenshotForm.LastFileNamePrefix;
ScreenshotForm.NextCaptureNumber++;
this.DialogResult = DialogResult.OK;
this.Close();
//Try to create a descriptive text file matching the image name
try
{
string dirname = System.IO.Path.GetDirectoryName(this.Filename);
string basename = System.IO.Path.GetFileNameWithoutExtension(this.Filename);
string MetaFilename = System.IO.Path.Combine(dirname, basename + ".txt");
using (System.IO.StreamWriter textFile = System.IO.File.CreateText(MetaFilename))
{
double X = this.Rect.Left;
double Y = this.Rect.Bottom;
textFile.WriteLine("Filename:\t" + Filename);
textFile.WriteLine("X: " + X.ToString() + "\tY: " + Y.ToString() + "\tZ: " + this._Z.ToString());
textFile.WriteLine("Width: " + Rect.Width.ToString() + "\tHeight: " + Rect.Height.ToString());
textFile.WriteLine("Downsample: " + Downsample.ToString());
}
}
catch (Exception except)
{
MessageBox.Show("Error creating meta-data file for screen capture:\n" + except.Message, "Error");
}
}
/// <summary>
/// Returns true if the specified tile is visible
/// </summary>
/// <param name="iX"></param>
/// <param name="iY"></param>
/// <returns></returns>
private GridRectangle TileBorder(int iX, int iY, int Downsample)
{
GridRectangle TileBorder;
double Width = this.TileSizeX * Downsample;
double Height = this.TileSizeY * Downsample;
double X = iX * Width;
double Y = iY * Height;
TileBorder = new GridRectangle(X, X+Width, Y, Y+Height);
return TileBorder;
}
private List<Tile> RecursiveVisibleTiles(
GridRectangle VolumeVisibleBounds,
GridRectangle SectionVisibleBounds,
GridQuad VisibleQuad,
int roundedDownsample)
{
GridInfo gridInfo = LevelToGridInfo[roundedDownsample];
int ScaledTileSizeX = this.TileSizeX * roundedDownsample;
int ScaledTileSizeY = this.TileSizeX * roundedDownsample;
//Figure out which grid locations are visible
int iMinX = (int)Math.Floor(SectionVisibleBounds.Left / ScaledTileSizeX);
int iMinY = (int)Math.Floor(SectionVisibleBounds.Bottom / ScaledTileSizeY);
int iMaxX = (int)Math.Ceiling(SectionVisibleBounds.Right / ScaledTileSizeX);
int iMaxY = (int)Math.Ceiling(SectionVisibleBounds.Top / ScaledTileSizeY);
iMinX = iMinX < 0 ? 0 : iMinX;
iMinY = iMinY < 0 ? 0 : iMinY;
iMaxX = iMaxX > gridInfo.GridXDim ? gridInfo.GridXDim : iMaxX;
iMaxY = iMaxY > gridInfo.GridYDim ? gridInfo.GridYDim : iMaxY;
int ExpectedTileCount = (iMaxX - iMinX) * (iMaxY - iMinY);
List<Tile> TilesToDraw = new List<Tile>(ExpectedTileCount);
for (int iX = iMinX; iX < iMaxX; iX++)
{
for (int iY = iMinY; iY < iMaxY; iY++)
{
//Figure out if the tile would be visible
GridRectangle tileBorder = TileBorder(iX, iY, roundedDownsample);
if (tileBorder.Intersects(SectionVisibleBounds) == false)
continue;
//If we have a visble quad see if the tile intersects that too
if (VisibleQuad != null)
{
if (VisibleQuad.Contains(tileBorder) == false)
continue;
}
string UniqueID = Tile.CreateUniqueKey(Section.Number, "Grid to Volume", Name, roundedDownsample, this.TileTextureFileName(iX, iY));
// Trace.WriteLine(TextureFileName, "VolumeModel");
Tile tile = Global.TileCache.Fetch(UniqueID);
if (tile == null)
{
//First create a new tile
int MipMapLevels = 1; //No mip maps
if (roundedDownsample == this.AvailableLevels[AvailableLevels.Length - 1])
MipMapLevels = 0; //Generate mipmaps for lowest res texture
//PORT: string TextureCacheFileName = TileCacheName(iX, iY, roundedDownsample);
int[] edges;
// Trace.WriteLine(TextureFileName, "VolumeModel");
PositionNormalTextureVertex[] verticies = CalculateVerticies(iX,
iY,
roundedDownsample,
out edges);
string TextureFileName = TileFullPath(iX, iY, roundedDownsample);
tile = Global.TileCache.ConstructTile(UniqueID,
verticies,
edges,
TextureFileName,
this.TileTextureCacheFileName(roundedDownsample, iX, iY),
//PORT: TextureCacheFileName,
this.Name,
roundedDownsample,
MipMapLevels);
}
TilesToDraw.Add(tile);
}
}
return TilesToDraw;
}
/// <summary>
/// Return all the line segments visible in the passed bounds
/// </summary>
/// <param name="bounds"></param>
/// <returns></returns>
public StructureLink[] VisibleStructureLinks(GridRectangle bounds)
{
StructureLink[] LinkList = StructureLinksSearch.GetValues(bounds);
return LinkList;
}
/// <summary>
/// This code was reverse engineered from original stos polynomial transform source
/// </summary>
/// <param name="parts"></param>
/// <param name="pixelSpacing"></param>
/// <param name="iFixedParameters"></param>
/// <param name="iVariableParameters"></param>
/// <param name="MappedBounds"></param>
/// <returns></returns>
public static List<MappingGridVector2> ParsePolyTransform(string[] parts, float pixelSpacing, int iFixedParameters, int iVariableParameters, GridRectangle MappedBounds)
{
List<MappingGridVector2> mappings = new List<MappingGridVector2>();
float MappedWidth = (float)MappedBounds.Width;
float MappedHeight = (float)MappedBounds.Height;
int numParams = System.Convert.ToInt32(parts[iVariableParameters +1]);
//Skip two so we skip the "vp 5" part of the file and our indicies line up with Paul's code
iFixedParameters += 2;
iVariableParameters += 2;
double uc = System.Convert.ToDouble(parts[iFixedParameters]);
double vc = System.Convert.ToDouble(parts[iFixedParameters + 1]);
double xmax = System.Convert.ToDouble(parts[iFixedParameters + 2]);
double ymax = System.Convert.ToDouble(parts[iFixedParameters + 3]);
uc = xmax / 2;
vc = ymax / 2;
double[] parameters = new double[numParams];
for(int iVP = 0; iVP < numParams; iVP++)
{
parameters[iVP] = System.Convert.ToDouble(parts[iVariableParameters + iVP]);
}
int gridHeight = 5;
int gridWidth = 5;
int NumPts = (int)(gridHeight * gridWidth);
GridVector2[] Points = new GridVector2[NumPts];
for (int iY = 0; iY < gridHeight; iY++)
{
for (int iX = 0; iX < gridWidth; iX++)
{
double u = (xmax / (double)(gridWidth-1)) * (double)iX;
double v = (ymax / (double)(gridHeight-1)) * (double)iY;
double A = (u - uc) / xmax;
double B = (v - vc) / ymax;
//For some reason I am off by a factor of two:
A *= 2;
B *= 2;
double[] P = new double[Dimensions + 1];
double[] Q = new double[Dimensions + 1];
for (int i = 0; i <= Dimensions; i++)
{
P[i] = Legendre.P[i](A);
Q[i] = Legendre.P[i](B);
}
double Sa = 0.0;
double Sb = 0.0;
for (int i = 0; i <= Dimensions; i++)
{
for (int j = 0; j <= i; j++)
{
int k = i - j;
double PjQk = P[j] * Q[k];
Sa += parameters[index_a(j, k)] * PjQk;
Sb += parameters[index_b(j, k)] * PjQk;
}
}
Points[(iY * gridWidth) + iX] = new GridVector2((xmax * Sa * pixelSpacing), (ymax * Sb * pixelSpacing));
}
}
for (int y = 0; y < gridHeight; y++)
{
for (int x = 0; x < gridWidth; x++)
{
int i = x + (y * gridWidth);
GridVector2 controlPoint = Points[i];
GridVector2 mappedPoint = CoordinateFromGridPos(x, y, gridWidth, gridHeight, MappedWidth, MappedHeight);
mappings.Add(new MappingGridVector2(controlPoint, mappedPoint));
}
}
return mappings;
}
public GridRectangle RenderTargetBounds()
{
if (Device == null)
return new GridRectangle(0, 0, 10, 10);
//For debugging
const int offset = 0;
//GridVector2 TopLeft = ScreenToWorld(offset, offset);
//GridVector2 BottomLeft = ScreenToWorld(offset, GraphicsDevice.Viewport.Height - offset);
//GridVector2 TopRight = ScreenToWorld(GraphicsDevice.Viewport.Width - offset, offset);
GridVector2 BottomLeft = Scene.ScreenToWorld(offset, Device.Viewport.Height - offset);
GridVector2 TopRight = Scene.ScreenToWorld(Device.Viewport.Width - offset, offset);
GridRectangle rect = new GridRectangle(BottomLeft, TopRight.X - BottomLeft.X, TopRight.Y - BottomLeft.Y);
return rect;
}
/// <summary>
/// Returns a rectangle bounding the passed rectangles
/// </summary>
/// <param name="A"></param>
/// <param name="B"></param>
/// <returns></returns>
public static GridRectangle Union(GridRectangle A, GridRectangle B)
{
double left = A.Left < B.Left ? A.Left : B.Left;
double right = A.Right > B.Right ? A.Right : B.Right;
double top = A.Top > B.Top ? A.Top : B.Top;
double bottom = A.Bottom < B.Bottom ? A.Bottom : B.Bottom;
return new GridRectangle(left, right, bottom, top);
}
private static List<Location_CanvasViewModel> FindVisibleLocations(ICollection<Location_CanvasViewModel> locations, GridRectangle VisibleBounds)
{
GridCircle VisibleCircle = new GridCircle(VisibleBounds.Center, GridVector2.Distance(VisibleBounds.Center, new GridVector2(VisibleBounds.Left, VisibleBounds.Top)));
List<Location_CanvasViewModel> listLocationsToDraw = new List<Location_CanvasViewModel>(locations.Count);
foreach (Location_CanvasViewModel loc in locations)
{
if (loc == null)
continue;
if (!loc.VolumePositionHasBeenCalculated)
continue;
//Find out if we should draw the location
if (loc.TypeCode == LocationType.CIRCLE)
{
if (VisibleCircle.Intersects(loc.VolumePosition, loc.Radius) == false)
continue;
}
else if (loc.TypeCode == LocationType.POINT)
{
if (VisibleBounds.Contains(loc.VolumePosition) == false)
continue;
}
else
{
Debug.Fail("Unknown location type");
}
Structure ParentStructure = loc.Parent;
if (ParentStructure == null)
continue;
if (ParentStructure.Type == null)
continue;
listLocationsToDraw.Add(loc);
}
return listLocationsToDraw;
}
protected override void OnMouseUp(object sender, MouseEventArgs e)
{
if (oldMouse != null)
{
if (oldMouse.Button == MouseButtons.Left && this.CommandActive)
{
GridVector2 NewPosition = Parent.ScreenToWorld(e.X, e.Y);
double Width = Math.Abs(NewPosition.X - Origin.X);
double Height = Math.Abs(NewPosition.Y - Origin.Y);
double X = Math.Min(Origin.X, NewPosition.X);
double Y = Math.Min(Origin.Y, NewPosition.Y);
MyRect = new GridRectangle(new GridVector2(X, Y), Width, Height);
Execute();
this.Parent.Refresh();
}
}
base.OnMouseUp(sender, e);
}
/// <summary>
/// Returns a set of tiles which should be rendered in the order returned
/// </summary>
/// <param name="VisibleBounds">Visible region of the section</param>
/// <returns></returns>
public abstract TilePyramid VisibleTiles(GridRectangle VisibleBounds,
double DownSample
//PORT: bool AsynchTextureLoad
);
public List<MappingGridVector2> IntersectingMappedRectangle(GridRectangle gridRect, bool IncludeAdjacent)
{
List<MappingGridVector2> foundPoints = IntersectingRectangle(gridRect, this.mapTriangles);
if (!IncludeAdjacent)
{
for (int i = 0; i < foundPoints.Count; i++)
{
if (!gridRect.Contains(foundPoints[i].MappedPoint))
{
foundPoints.RemoveAt(i);
i--;
}
}
}
return foundPoints;
}
public override TilePyramid VisibleTiles(GridRectangle VisibleBounds, double DownSample)
{
if (VolumeTransform != null)
{
GridQuad VisibleQuad = null;
//Add any corners of the VisibleBounds that we can transform to the list of points
List<MappingGridVector2> VisiblePoints = VisibleBoundsCorners(VolumeTransform, VisibleBounds);
if (VisiblePoints.Count == 4)
{
VisiblePoints.Sort(new MappingGridVector2SortByMapPoints());
VisibleQuad = new GridQuad(VisiblePoints[0].MappedPoint,
VisiblePoints[1].MappedPoint,
VisiblePoints[2].MappedPoint,
VisiblePoints[3].MappedPoint);
}
return VisibleTiles(VisibleBounds, VisibleQuad, DownSample);
}
else
{
return new TilePyramid(VisibleBounds);
}
}
/// <summary>
/// Use this to set points and triangles so we don't have to run the delaunay algorithm.
/// </summary>
/// <param name="points"></param>
/// <param name="triangleIndicies"></param>
public void SetPointsAndTriangles(MappingGridVector2[] points, int[] triangleIndicies)
{
#if DEBUG
//Check for duplicate points
for (int i = 1; i < points.Length; i++)
{
Debug.Assert(points[i - 1].ControlPoint != points[i].ControlPoint, "Duplicate Points found in transform. This breaks Delaunay.");
}
#endif
_mapPoints = points;
_TriangleIndiciesCache = triangleIndicies;
this._CachedMappedBounds = MappingGridVector2.CalculateMappedBounds(this.mapPoints);
this._CachedControlBounds = MappingGridVector2.CalculateControlBounds(this.mapPoints);
}