private int computeVal(int[,] matrix, int[,] prev, int row, int col, GeneSequence sequenceA, GeneSequence sequenceB)
{
// Get the two letters to compare.
char letterA = sequenceA.Sequence[row - 1];
char letterB = sequenceB.Sequence[col - 1];
int diagVal = letterA == letterB ? -3 : 1; // If they are the same, the diagonal score is -3, otherwise 1
int indelVal = 5;
// If the diagnoal score is the smallest of the three, store the DIAG value in the prev matrix and return the cost for the cell at matrix[row,col]
if (matrix[row - 1, col - 1] + diagVal <= matrix[row - 1, col] + indelVal && matrix[row - 1, col - 1] + diagVal <= matrix[row, col - 1] + indelVal)
{
prev[row, col] = DIAG;
return(matrix[row - 1, col - 1] + diagVal);
}
// Else if the indel score from above is the smallest, store the UP value in the prev matrix and return the cost
else if (matrix[row - 1, col] + indelVal < matrix[row - 1, col - 1] + diagVal && matrix[row - 1, col] + indelVal <= matrix[row, col - 1] + indelVal)
{
prev[row, col] = UP;
return(matrix[row - 1, col] + indelVal);
}
// Else the indel score from the left must be the smallest. Store it in prev and return the cost.
else
{
prev[row, col] = LEFT;
return(matrix[row, col - 1] + indelVal);
}
}
private void bandedAlg(int[,] matrix, int[,] prev, int rows, int cols, GeneSequence sequenceA, GeneSequence sequenceB)
{
if (Math.Abs(rows - cols) > 3)
{
matrix[rows - 1, cols - 1] = int.MaxValue;
return;
}
int i, j;
i = j = 0;
try
{
int maxD = rows > cols ? rows : cols;
for (i = 1; i < maxD; i++)
{
for (j = 0; j < 4; j++)
{
if (i + j < cols && i < rows)
{
matrix[i, i + j] = computeVal(matrix, prev, i, i + j, sequenceA, sequenceB);
}
if (i + j < rows && i < cols)
{
matrix[i + j, i] = computeVal(matrix, prev, i + j, i, sequenceA, sequenceB);
}
}
}
}
catch (IndexOutOfRangeException e)
{
Console.WriteLine("rows=" + rows + " cols=" + cols);
Console.WriteLine("i=" + i + " j=" + j);
}
}
private void bandedAlg(int[,] matrix, int[,] prev, int rows, int cols, GeneSequence sequenceA, GeneSequence sequenceB)
{
// If the difference is greater than 3, they cannot be aligned.
if (Math.Abs(rows - cols) > 3)
{
// Set the score cell to int.MaxValue to indicate that they weren't aligned.
matrix[rows - 1, cols - 1] = int.MaxValue;
return;
}
int i, j;
i = j = 0;
// Get the larger of the two out of the rows and columns. This is because we need to get to the bottom right.
int maxD = rows > cols ? rows : cols;
// This loop travels down the diagonal
for (i = 1; i < maxD; i++)
{
// This loop uses an offset to compute the cell on the diagonal, 3 to the right, and 3 below.
for (j = 0; j < 4; j++)
{
// Compute cell to the right
if (i + j < cols && i < rows)
{
matrix[i, i + j] = computeVal(matrix, prev, i, i + j, sequenceA, sequenceB);
}
// Compute cell below.
if (i + j < rows && i < cols)
{
matrix[i + j, i] = computeVal(matrix, prev, i + j, i, sequenceA, sequenceB);
}
}
}
}
public void WriteGeneSequence(GeneSequence geneSequence)
{
//writemessage("writing to database...");
try
{
// because the sequence can be so long, we need to use parameters
//string insertCommandString = "INSERT INTO DNA (Name, Sequence) VALUES (?, ?)";
string insertCommandString = "INSERT INTO DNA (Name, Sequence) VALUES (?, ?)";
//string insertCommandString = "INSERT INTO DNA VALUES (3, ?, ?)";
OleDbCommand insertCommand = new OleDbCommand(insertCommandString, m_accessConn);
ASCIIEncoding encoding = new ASCIIEncoding();
insertCommand.Parameters.Add(new OleDbParameter("name", geneSequence.Name));
//insertCommand.Parameters.Add(new OleDbParameter("name", encoding.GetBytes(geneSequence.Name.ToCharArray())));
int a = geneSequence.Name.Length;
//insertCommand.Parameters.Add(new OleDbParameter("sequence", geneSequence.Sequence.ToCharArray()));
insertCommand.Parameters.Add(new OleDbParameter("sequence", geneSequence.Sequence));
m_accessConn.Open();
insertCommand.ExecuteNonQuery();
}
/*catch (Exception e)
* {
* //writemessage("Error trying to write the results to the database");
* //writemessage(e.ToString());
* return;
* }*/
finally
{
m_accessConn.Close();
}
//writemessage("done writing to database. See the row in the tProblems table with problem = " + currentProblem + " to see what happened.");
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="resultTableSoFar">the table of alignment results that has been generated so far using pair-wise alignment</param>
/// <param name="rowInTable">this particular alignment problem will occupy a cell in this row the result table.</param>
/// <param name="columnInTable">this particular alignment will occupy a cell in this column of the result table.</param>
/// <returns>the alignment score for sequenceA and sequenceB. The calling function places the result in entry rowInTable,columnInTable
/// of the ResultTable</returns>
public int Score(GeneSequence sequenceA, GeneSequence sequenceB, ResultTable resultTableSoFar, int rowInTable, int columnInTable)
{
initialize(sequenceA, sequenceB);
for (int i = 1; i < height; i++)
{
for (int j = 1; j < width; j++)
{
int diagCellCost = 0;
if (X[j - 1] == Y[i - 1])
diagCellCost = CharsMatchCost;
else
diagCellCost = SubstitutionCost;
double topCell = prev[j] + InsertDeleteCost;
double leftCell = results[j - 1] + InsertDeleteCost;
double diagCell = prev[j - 1] + diagCellCost;
double min = Math.Min(topCell, Math.Min(diagCell, leftCell));
results[j] = min;
}
currentRow++;
SwapArrays();
}
return (int)prev[width - 1];
}
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
// ********* these are placeholder assignments that you'll replace with your code *******
score = 0;
alignment[0] = "";
alignment[1] = "";
// ***************************************************************************************
if (!banded)
{
unrestrictedAlgorithm(ref score, ref alignment, ref sequenceA, ref sequenceB);
}
else
{
bandedAlgorithm(ref score, ref alignment, ref sequenceA, ref sequenceB);
}
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
/**
* This function creates the alignments for both sequences using the previous pointers array
* Time Complexity: O(n) where n is the length of the larger sequence because it the best alignment
* is as long as the length of the longest sequence
* Space Complexity: O(n) where n is the length of the larger sequence as it creates a string as long as it
*/
void createAlignments(ref string[] alignment, ref directions[,] prev, ref GeneSequence sequenceA, ref GeneSequence sequenceB,
ref int lengthOfSequenceA, ref int lengthOfSequenceB)
{
int rowIterator = lengthOfSequenceA, columnIterator = lengthOfSequenceB;
StringBuilder first = new StringBuilder(), second = new StringBuilder();
while (rowIterator != 0 || columnIterator != 0)
{
if (prev[rowIterator, columnIterator] == directions.DIAGONAL) // match/sub
{
first.Insert(0, sequenceA.Sequence[rowIterator - 1]);
second.Insert(0, sequenceB.Sequence[columnIterator - 1]);
rowIterator--;
columnIterator--;
}
else if (prev[rowIterator, columnIterator] == directions.LEFT) //insert
{
first.Insert(0, '-');
second.Insert(0, sequenceB.Sequence[columnIterator - 1]);
columnIterator--;
}
else // delete
{
first.Insert(0, sequenceA.Sequence[rowIterator - 1]);
second.Insert(0, '-');
rowIterator--;
}
}
// Limiting the length of the string to 100 if it exceeds it
alignment[0] = first.ToString().Substring(0, Math.Min(first.Length, 100));
alignment[1] = second.ToString().Substring(0, Math.Min(second.Length, 100));
}
private GeneSequence[] loadFile(string fileName)
{
StreamReader reader = new StreamReader(fileName);
string input = "";
try
{
input = reader.ReadToEnd();
}
catch
{
Console.WriteLine("Error Parsing File...");
return(null);
}
finally
{
reader.Close();
}
GeneSequence[] temp = new GeneSequence[NUMBER_OF_SEQUENCES];
string[] inputLines = input.Split('\r');
for (int i = 0; i < NUMBER_OF_SEQUENCES; i++)
{
string[] line = inputLines[i].Replace("\n", "").Split('#');
temp[i] = new GeneSequence(line[0], line[1]);
}
return(temp);
}
private void dataGridViewResults_CellMouseClick(object sender, DataGridViewCellMouseEventArgs e)
{
GeneSequence seqA = m_sequences[e.ColumnIndex];
GeneSequence seqB = m_sequences[e.RowIndex];
String[] results = processor.extractSolution(seqA, seqB);
String outputMessage = String.Format("Output Console: {0}= MATCH, {1}= SUB, {2}= INDEL",
processor.MATCH_CHAR, processor.SUB_CHAR, processor.INDEL_CHAR);
String outputText = String.Format("{0}\r\nGene Alignment for Cell (Row:{1}, Col:{2})\r\nA: {3}\r\n {4}\r\nB: {5}",
outputMessage,
e.RowIndex + 1,
e.ColumnIndex + 1,
processor.formatSequence(results[0], MaxToDisplay),
processor.formatSequence(results[2], MaxToDisplay),
processor.formatSequence(results[1], MaxToDisplay));
String sideText = String.Format("\r\n\r\nA: {0}\r\n\r\nB: {1}\r\n\r\nA: {2}\r\n\r\nB: {3}",
seqA.Name,
seqB.Name,
processor.formatSequence(seqA.Sequence, 15),
processor.formatSequence(seqB.Sequence, 15));
sideBar.Text = sideText;
outputConsole.Text = outputText;
}
/**
* This function creates the alignments for both sequences using the previous pointers array
* Time Complexity: O(n) where n is the length of the larger sequence because it the best alignment
* is as long as the length of the longest sequence
* Space Complexity: O(n) where n is the length of the larger sequence as it creates a string as long as it
*/
void createAlignments(ref string[] alignment, ref directions[,] prev, ref GeneSequence sequenceA, ref GeneSequence sequenceB,
ref int lengthOfSequenceA, ref int lengthOfSequenceB)
{
int rowIterator = lengthOfSequenceA, columnIterator = lengthOfSequenceB;
StringBuilder first = new StringBuilder(), second = new StringBuilder();
while (rowIterator != 0 || columnIterator != 0)
{
if (prev[rowIterator, columnIterator] == directions.DIAGONAL) // match/sub
{
first.Insert(0, sequenceA.Sequence[rowIterator - 1]);
second.Insert(0, sequenceB.Sequence[columnIterator - 1]);
rowIterator--;
columnIterator--;
}
else if (prev[rowIterator, columnIterator] == directions.LEFT) //insert
{
first.Insert(0, '-');
second.Insert(0, sequenceB.Sequence[columnIterator - 1]);
columnIterator--;
}
else // delete
{
first.Insert(0, sequenceA.Sequence[rowIterator - 1]);
second.Insert(0, '-');
rowIterator--;
}
}
// Limiting the length of the string to 100 if it exceeds it
alignment[0] = first.ToString().Substring(0, Math.Min(first.Length, 100));
alignment[1] = second.ToString().Substring(0, Math.Min(second.Length, 100));
}
public String[] extractSolution(GeneSequence sequenceA, GeneSequence sequenceB)
{
// initialize arrays and strings and first row
initialize(sequenceA, sequenceB);
// initialize table to store each row
List <int[]> resultTable = new List <int[]>(charA.Length + 1);
resultTable.Add(resultRow);
// calculate each additional row (and save it for backtrace)
for (int i = 0; i < charA.Length; i++)
{
resultTable.Add(computeNextRow(resultTable[i], charA[i], charB));
}
// compute back trace and generate final strings
StringBuilder buildA = new StringBuilder();
StringBuilder buildB = new StringBuilder();
StringBuilder buildC = new StringBuilder();
int row = charA.Length;
int col = charB.Length;
// while index pointers to string a (row) and string b (column) aren't at zero figure out last operation
while (row != 0 || col != 0)
{
if (resultTable[row][col] == resultTable[row][col - 1] + INDEL)
{
buildA.Append('-');
buildB.Append(charB[--col]);
buildC.Append(INDEL_CHAR);
}
else if (resultTable[row][col] == resultTable[row - 1][col] + INDEL)
{
buildA.Append(charA[--row]);
buildB.Append('-');
buildC.Append(INDEL_CHAR);
}
else if (resultTable[row][col] == resultTable[row - 1][col - 1] + MATCH ||
resultTable[row][col] == resultTable[row - 1][col - 1] + SUB)
{
buildA.Append(charA[--row]);
buildB.Append(charB[--col]);
buildC.Append(charB[col] == charA[row] ? MATCH_CHAR : SUB_CHAR);
}
else
{
throw new ArgumentException();
}
}
String[] results = new String[3];
results[0] = reverseString(buildA.ToString());
results[1] = reverseString(buildB.ToString());
results[2] = reverseString(buildC.ToString());
return(results);
}
/// <summary>
/// This is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="resultTableSoFar">the table of alignment results that has been generated so far using pair-wise alignment</param>
/// <param name="rowInTable">this particular alignment problem will occupy a cell in this row the result table.</param>
/// <param name="columnInTable">this particular alignment will occupy a cell in this column of the result table.</param>
/// <returns>the alignment score for sequenceA and sequenceB. The calling function places the result in entry rowInTable,columnInTable
/// of the ResultTable</returns>
public int Align(GeneSequence sequenceA, GeneSequence sequenceB, ResultTable resultTableSoFar, int rowInTable, int columnInTable)
{
if((columnInTable - rowInTable) < 0)
{
return 0;
}
Grid grid = new Grid(sequenceA.Sequence, sequenceB.Sequence, true, MaxCharactersToAlign);
return grid.CalculateScoreSolution();
}
private void unrestricted(int[,] matrix, int[,] prev, int rows, int cols, GeneSequence sequenceA, GeneSequence sequenceB)
{
for (int i = 1; i < rows; i++)
{
for (int j = 1; j < cols; j++)
{
matrix[i, j] = computeVal(matrix, prev, i, j, sequenceA, sequenceB);
}
}
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the display appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
int sub = MaxCharactersToAlign;
if (sequenceA.Sequence.Length < sub)
{
sub = sequenceA.Sequence.Length;
}
int sub2 = MaxCharactersToAlign;
if (sequenceB.Sequence.Length < sub2)
{
sub2 = sequenceB.Sequence.Length;
}
// ********* these are placeholder assignments that you'll replace with your code *******
score = int.MaxValue;
alignment[0] = "No Alignment Possible";
alignment[1] = "No Alignment Possible";
EditDistance editor;
if (banded)
{
if (Math.Abs(sub2 - sub) > Bandwidth)
{
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
editor = new EditDistance(sequenceA.Sequence.Substring(0, sub), sequenceB.Sequence.Substring(0, sub2));
editor.setupBanded();
//Console.WriteLine(editor.toString());
alignment = editor.bandedResults();
//Console.WriteLine(editor.toString());
score = editor.value();
}
else
{
editor = new EditDistance(sequenceA.Sequence.Substring(0, sub), sequenceB.Sequence.Substring(0, sub2));
editor.setupUnbanded();
alignment = editor.results();
score = editor.value();
}
// ***************************************************************************************
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
private void unrestricted(int[,] matrix, int[,] prev, int rows, int cols, GeneSequence sequenceA, GeneSequence sequenceB)
{
// For every cell from top left to bottom right, compute the value. Compute by row.
for (int i = 1; i < rows; i++)
{
for (int j = 1; j < cols; j++)
{
matrix[i, j] = computeVal(matrix, prev, i, j, sequenceA, sequenceB);
}
}
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="resultTableSoFar">the table of alignment results that has been generated so far using pair-wise alignment</param>
/// <param name="rowInTable">this particular alignment problem will occupy a cell in this row the result table.</param>
/// <param name="columnInTable">this particular alignment will occupy a cell in this column of the result table.</param>
/// <returns>the alignment score for sequenceA and sequenceB. The calling function places the result in entry rowInTable,columnInTable
/// of the ResultTable</returns>
public int Align(GeneSequence sequenceA, GeneSequence sequenceB, ResultTable resultTableSoFar, int rowInTable, int columnInTable)
{
// Only fill in above the diagonal
if (rowInTable <= columnInTable)
{
return(0);
}
string a = sequenceA.Sequence;
string b = sequenceB.Sequence;
int m = Math.Min(a.Length, MaxCharactersToAlign);
int n = Math.Min(b.Length, MaxCharactersToAlign);
int[][] E = new int[2][];
E[0] = new int[MaxCharactersToAlign + 1];
E[1] = new int[MaxCharactersToAlign + 1];
// Initialize first row with cost of indels
for (int j = 0; j <= n; j++)
{
E[0][j] = 5 * j;
}
int previous = 0;
int active = 1;
for (int i = 1; i <= m; i++)
{
for (int j = 0; j <= n; j++)
{
var indels = E[previous][j] + 5;
if (j == 0)
{
// If first element, only have one option
E[active][j] = indels;
}
else
{
// Get the minimum cost from the two available indels and the diagonal match/sub
indels = Math.Min(E[active][j - 1] + 5, indels);
var diff = (a[i - 1] == b[j - 1]) ? -3 : 1;
E[active][j] = Math.Min(indels, E[previous][j - 1] + diff);
}
}
// Swap active and previous (new active will get overwritten)
active = (active == 0) ? 1 : 0;
previous = (previous == 0) ? 1 : 0;
}
// Return last element in last filled row
return(E[previous][n]);
}
private void initialize(GeneSequence sequenceA, GeneSequence sequenceB)
{
// grab first 5000 (or all if less than 5000) characters of each sequence
charA = formatSequence(sequenceA.Sequence, MaxCharactersToAlign).ToCharArray();
charB = formatSequence(sequenceB.Sequence, MaxCharactersToAlign).ToCharArray();
resultRow = new int[charB.Length + 1];
// initialize bottom row with costs for INDEL
for (int i = 0; i < resultRow.Length; i++)
{
resultRow[i] = i * INDEL;
}
}
public int Align(GeneSequence sequenceA, GeneSequence sequenceB)
{
// initialize arrays and strings and first row
initialize(sequenceA, sequenceB);
// calculate each additional row
for (int i = 0; i < charA.Length; i++)
resultRow = computeNextRow(resultRow, charA[i], charB);
// return score
return resultRow[resultRow.Length - 1];
}
//Above are functions dealing with the alignment, below are functions dealing with the extraction
public String[] extractSequences(GeneSequence sequenceA, GeneSequence sequenceB)
{
// set up backtrace
initializeSequencing(sequenceA, sequenceB);
// initialize table to store each row
List <int[]> resultTable = new List <int[]>(charA.Length + 1);
resultTable.Add(resultRow);
// calculate individual table
for (int i = 0; i < charA.Length; i++) //recalculates the table in O(n^2) time as before in scoring algorithm
{
resultTable.Add(createNextRow(resultTable[i], charA[i], charB));
}
// initialize stringholders
StringBuilder one = new StringBuilder();
StringBuilder two = new StringBuilder();
int row = charA.Length;
int col = charB.Length;
// backtrace strings
// creates the string in reverse order as it traverses from the end to the beginning only going through those on the final path
while (row != 0 || col != 0)
{
if (resultTable[row][col] == resultTable[row][col - 1] + INDEL)
{
one.Append('-');
two.Append(charB[--col]);
}
else if (resultTable[row][col] == resultTable[row - 1][col] + INDEL)
{
one.Append(charA[--row]);
two.Append('-');
}
else if (resultTable[row][col] == resultTable[row - 1][col - 1] + MATCH ||
resultTable[row][col] == resultTable[row - 1][col - 1] + SUB)
{
one.Append(charA[--row]);
two.Append(charB[--col]);
}
else
{
throw new ArgumentException();
}
}
String[] results = new String[2];
results[0] = reverseString(one.ToString());
results[1] = reverseString(two.ToString());
return(results);
}
public String[] extractSolution(GeneSequence sequenceA, GeneSequence sequenceB)
{
// initialize arrays and strings and first row
initialize(sequenceA, sequenceB);
// initialize table to store each row
List<int[]> resultTable = new List<int[]>(charA.Length + 1);
resultTable.Add(resultRow);
// calculate each additional row (and save it for backtrace)
for (int i = 0; i < charA.Length; i++)
resultTable.Add(computeNextRow(resultTable[i], charA[i], charB));
// compute back trace and generate final strings
StringBuilder buildA = new StringBuilder();
StringBuilder buildB = new StringBuilder();
StringBuilder buildC = new StringBuilder();
int row = charA.Length;
int col = charB.Length;
// while index pointers to string a (row) and string b (column) aren't at zero figure out last operation
while (row != 0 || col != 0)
{
if (resultTable[row][col] == resultTable[row][col - 1] + INDEL)
{
buildA.Append('-');
buildB.Append(charB[--col]);
buildC.Append(INDEL_CHAR);
}
else if (resultTable[row][col] == resultTable[row - 1][col] + INDEL)
{
buildA.Append(charA[--row]);
buildB.Append('-');
buildC.Append(INDEL_CHAR);
}
else if (resultTable[row][col] == resultTable[row - 1][col - 1] + MATCH ||
resultTable[row][col] == resultTable[row - 1][col - 1] + SUB)
{
buildA.Append(charA[--row]);
buildB.Append(charB[--col]);
buildC.Append(charB[col] == charA[row] ? MATCH_CHAR : SUB_CHAR);
}
else
throw new ArgumentException();
}
String[] results = new String[3];
results[0] = reverseString(buildA.ToString());
results[1] = reverseString(buildB.ToString());
results[2] = reverseString(buildC.ToString());
return results;
}
//Sets up the array with the initial values for sequencing
private void initializeSequencing(GeneSequence sequenceA, GeneSequence sequenceB)
{
// grabs first 5000 characters of the sequences to evaluate
charA = stringLimit(sequenceA.Sequence, MaxCharactersToAlign).ToCharArray();
charB = stringLimit(sequenceB.Sequence, MaxCharactersToAlign).ToCharArray();
resultRow = new int[charB.Length + 1];
// initialize result row with costs for INDEL
for (int i = 0; i < resultRow.Length; i++)
{
resultRow[i] = i * INDEL;
}
}
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////// Unrestricted Algorithm ////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
* This function performs the unrestricted algorithm on the two sequences using dynamic programming to come up with
* the best alignment for both.
* Time Complexity: O(nm) where n is the length of the first sequence and m is the length of the second sequence. This
* is because the algorithm iterates over all cells in the array of n x m
* Space Complexity: O(nm) where n is the length of the first sequence and m is the length of the second sequence. This
* is because the algorithm creates an array of n x m
*/
void unrestrictedAlgorithm(ref int score, ref string[] alignment, ref GeneSequence sequenceA, ref GeneSequence sequenceB)
{
// Limiting the lengths of the sequences to the max characters to align
int lengthOfSequenceA = Math.Min(sequenceA.Sequence.Length, MaxCharactersToAlign);
int lengthOfSequenceB = Math.Min(sequenceB.Sequence.Length, MaxCharactersToAlign);
// Create two arrays to hold the intermediate values and the alignment details
int[,] values = new int[lengthOfSequenceA + 1, lengthOfSequenceB + 1];
directions[,] prev = new directions[lengthOfSequenceA + 1, lengthOfSequenceB + 1];
// first fill first row and column with cost of inserts/deletes
fillStartCells(ref values, ref prev, lengthOfSequenceA, lengthOfSequenceB, false);
// Now iterate through the rest of the cells filling out the min value for each
for (int row = 1; row < lengthOfSequenceA + 1; row++)
{
for (int column = 1; column < lengthOfSequenceB + 1; column++)
{
// Compute values for each direction
int costOfTop_Delete = values[row - 1, column] + 5;
int costOfLeft_Insert = values[row, column - 1] + 5;
// Compute cost of moving from diagonal depending on whether the letters match
int costOfMovingFromDiagonal = (sequenceA.Sequence[row - 1] == sequenceB.Sequence[column - 1]) ? -3 : 1;
int costOfDiagonal = values[row - 1, column - 1] + costOfMovingFromDiagonal;
// value of cell would be the minimum cost out of the three directions
int costOfMin = Math.Min(costOfTop_Delete, Math.Min(costOfLeft_Insert, costOfDiagonal));
values[row, column] = costOfMin;
// Store the direction
if (costOfMin == costOfDiagonal)
{
prev[row, column] = directions.DIAGONAL;
}
else if (costOfMin == costOfLeft_Insert)
{
prev[row, column] = directions.LEFT;
}
else
{
prev[row, column] = directions.TOP;
}
}
}
// score would be value of the last cell
score = values[lengthOfSequenceA, lengthOfSequenceB];
// Create the alignments
createAlignments(ref alignment, ref prev, ref sequenceA, ref sequenceB, ref lengthOfSequenceA, ref lengthOfSequenceB);
}
public int Align(GeneSequence sequenceA, GeneSequence sequenceB)
{
// initialize arrays and strings and first row
initialize(sequenceA, sequenceB);
// calculate each additional row
for (int i = 0; i < charA.Length; i++)
{
resultRow = computeNextRow(resultRow, charA[i], charB);
}
// return score
return(resultRow[resultRow.Length - 1]);
}
public void initialize(GeneSequence aSequence, GeneSequence bSequence)
{
X = aSequence.Sequence;
Y = bSequence.Sequence;
setDimensions();
prev = new double[width];
results = new double[width];
for (int i = 1; i < width; ++i)
results[i] = InsertDeleteCost * i;
currentRow++;
SwapArrays();
}
public dpRows(GeneSequence aSequence, GeneSequence bSequence)
{
X = aSequence.Sequence;
Y = bSequence.Sequence;
setDimensions();
prev = new double[width];
results = new double[width];
for (int i = 1; i < width; ++i)
this.SetCell(i, InsertDeleteCost * i);
currentRow++;
this.SwapArrays();
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
alignment[0] = alignment[1] = "";
int maxLengthVal = banded ? 15001 : MaxCharactersToAlign;
// If the sequences are longer than the desired alignment length, align only the desired amount.
int rows = maxLengthVal < sequenceA.Sequence.Length + 1? maxLengthVal : sequenceA.Sequence.Length + 1;
int cols = maxLengthVal < sequenceB.Sequence.Length + 1? maxLengthVal : sequenceB.Sequence.Length + 1;
// Create the cost matrix and the matrix used to track the path.
int[,] matrix = new int[rows, cols];
int[,] prev = new int[rows, cols];
initializeMatrices(matrix, prev, rows, cols);
// If it's not banded, do the unrestriced algorithm. Otherwise do banded.
if (!banded)
{
unrestricted(matrix, prev, rows, cols, sequenceA, sequenceB);
}
else
{
bandedAlg(matrix, prev, rows, cols, sequenceA, sequenceB);
}
// The score is stored in the last cell.
score = matrix[rows - 1, cols - 1];
// Find the alignment strings by using the path stored in prev
findAlignments(alignment, prev, rows, cols, score, sequenceA.Sequence, sequenceB.Sequence);
// If the strings are too long to display, just display 100 characters.
if (alignment[0].Length > 100)
{
alignment[0] = alignment[0].Substring(0, 100);
}
if (alignment[1].Length > 100)
{
alignment[1] = alignment[1].Substring(0, 100);
}
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
public GenomeSequencer(GeneSequence sequenceA, GeneSequence sequenceB, int maxSize)
{
//sequence A will the the "top" word, so it will be the columns
//sequence B will be the "side" word, so it will be the rows
this.sequenceA = sequenceA;
this.sequenceB = sequenceB;
rowSize = Math.Min(maxSize, sequenceB.Sequence.Length) + 1; //add one to add base case row and column
colSize = Math.Min(maxSize, sequenceA.Sequence.Length) + 1;
//set up the sequencer arrays to be the size of the sequences to be used when calculating the cost of the sequences
int alength = sequenceA.Sequence.Length;
int blength = sequenceB.Sequence.Length;// used for debugging
initializeAlignmentCost();
initializePreviousMatrix();
}
private void dataGridViewResults_CellClick(object sender, DataGridViewCellEventArgs e)
{
GeneSequence sequenceA = this.m_sequences[e.ColumnIndex];
GeneSequence sequenceB = this.m_sequences[e.RowIndex];
String[] results = processor.extractSequences(sequenceA, sequenceB);
String outputText = "Output Console:";
outputText += "\r\nCell (";
outputText += (e.RowIndex + 1) + ", ";
outputText += (e.ColumnIndex + 1) + ")";
outputText += "\r\nSequence A: " + processor.stringLimit(results[0], 100);
outputText += "\r\nSequence B: " + processor.stringLimit(results[1], 100);
outputConsole.Text = outputText;
}
public dpTable(GeneSequence aSequence, GeneSequence bSequence)
{
X = aSequence.Sequence;
Y = bSequence.Sequence;
setDimensions();
results = new node[width, height];
this.SetCell(0, 0, 0, "start");
for (int i = 1; i < width; ++i)
this.SetCell(i, 0, indel * i, "left");
for (int j = 1; j < height; ++j)
this.SetCell(0, j, indel * j, "top");
}
public Algo(GeneSequence sequenceA, GeneSequence sequenceB, bool banded, int size)
{
seqA = sequenceA;
seqB = sequenceB;
this.banded = banded;
this.sizeRow = size + 1;
this.sizeCol = size + 1;
if (this.sizeRow > sequenceA.Sequence.Length)
{
this.sizeRow = sequenceA.Sequence.Length;
this.sizeRow++;
}
if (this.sizeCol > sequenceB.Sequence.Length)
{
this.sizeCol = sequenceB.Sequence.Length;
this.sizeCol++;
}
prev = new char[this.sizeRow, this.sizeCol];
dis = new int[this.sizeRow, this.sizeCol];
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
// ********* these are placeholder assignments that you'll replace with your code *******
GenomeSequencer genomeSequencer = new GenomeSequencer(sequenceA, sequenceB, MaxCharactersToAlign);
score = genomeSequencer.calculateSequenceCost(banded);
//score = 0;
alignment[0] = "";
alignment[1] = "";
// ***************************************************************************************
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
//Dictionary<string, int> previouslyCalculatedValues = new Dictionary<string, int>();
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="resultTableSoFar">the table of alignment results that has been generated so far using pair-wise alignment</param>
/// <param name="rowInTable">this particular alignment problem will occupy a cell in this row the result table.</param>
/// <param name="columnInTable">this particular alignment will occupy a cell in this column of the result table.</param>
/// <returns>the alignment score for sequenceA and sequenceB. The calling function places the result in entry rowInTable,columnInTable
/// of the ResultTable</returns>
public int Align(GeneSequence sequenceA, GeneSequence sequenceB, ResultTable resultTableSoFar, int rowInTable, int columnInTable)
{
// a place holder computation. You'll want to implement your code here.
//string key = sequenceA.Sequence.ToString() + sequenceB.Sequence.ToString();
//if (previouslyCalculatedValues.ContainsKey(key))
// return previouslyCalculatedValues[key];
// set up algorithm
initializeSequencing(sequenceA, sequenceB);
// calculate each additional row
//Overall time complexity of this part is O(n^2) and space complexity is O(n)
for (int i = 0; i < charA.Length; i++) // will go through the length of our frist sequence array size 0-5000 O(n)
{
resultRow = createNextRow(resultRow, charA[i], charB); //O(n)
}
// return score
//previouslyCalculatedValues.Add(key,resultRow[resultRow.Length - 1]);
return(resultRow[resultRow.Length - 1]);
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(Tuple<int,int> cell, GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
// ********* these are placeholder assignments that you'll replace with your code *******
string a = sequenceA.Sequence.Substring(0, sequenceA.Sequence.Length < MaxCharactersToAlign ? sequenceA.Sequence.Length : MaxCharactersToAlign);
string b = sequenceB.Sequence.Substring(0, sequenceB.Sequence.Length < MaxCharactersToAlign ? sequenceB.Sequence.Length : MaxCharactersToAlign);
DynamicProgramming dp = new DynamicProgramming(cell, a, b, banded);
score = dp.getScore();
alignment[0] = dp.getResultA();
alignment[1] = dp.getResultB();
// ***************************************************************************************
result.Update(score,alignment[0],alignment[1]); // bundling your results into the right object type
return(result);
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
alignment[0] = alignment[1] = "";
int maxLengthVal = banded ? 15001 : MaxCharactersToAlign;
int rows = maxLengthVal < sequenceA.Sequence.Length + 1? maxLengthVal : sequenceA.Sequence.Length + 1;
int cols = maxLengthVal < sequenceB.Sequence.Length + 1? maxLengthVal : sequenceB.Sequence.Length + 1;
int[,] matrix = new int[rows, cols];
int[,] prev = new int[rows, cols];
initializeMatrices(matrix, prev, rows, cols);
if (!banded)
{
unrestricted(matrix, prev, rows, cols, sequenceA, sequenceB);
}
else
{
bandedAlg(matrix, prev, rows, cols, sequenceA, sequenceB);
}
score = matrix[rows - 1, cols - 1];
findAlignments(alignment, prev, rows, cols, score, sequenceA.Sequence, sequenceB.Sequence);
if (alignment[0].Length > 100)
{
alignment[0] = alignment[0].Substring(0, 100);
}
if (alignment[1].Length > 100)
{
alignment[1] = alignment[1].Substring(0, 100);
}
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
Algo algo = new Algo(sequenceA, sequenceB, false, 5000);
algo.RunAlgo();
algo.CalcStrings();
//algo.PrintArray();
// ********* these are placeholder assignments that you'll replace with your code *******
score = algo.GetScore();
alignment[0] = algo.GetRowString();
alignment[1] = algo.GetColString();
// ***************************************************************************************
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(Tuple <int, int> cell, GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
// ********* these are placeholder assignments that you'll replace with your code *******
string a = sequenceA.Sequence.Substring(0, sequenceA.Sequence.Length < MaxCharactersToAlign ? sequenceA.Sequence.Length : MaxCharactersToAlign);
string b = sequenceB.Sequence.Substring(0, sequenceB.Sequence.Length < MaxCharactersToAlign ? sequenceB.Sequence.Length : MaxCharactersToAlign);
DynamicProgramming dp = new DynamicProgramming(cell, a, b, banded);
score = dp.getScore();
alignment[0] = dp.getResultA();
alignment[1] = dp.getResultB();
// ***************************************************************************************
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
private int computeVal(int[,] matrix, int[,] prev, int row, int col, GeneSequence sequenceA, GeneSequence sequenceB)
{
char letterA = sequenceA.Sequence[row - 1];
char letterB = sequenceB.Sequence[col - 1];
int diagVal = letterA == letterB ? -3 : 1;
int indelVal = 5;
if (matrix[row - 1, col - 1] + diagVal <= matrix[row - 1, col] + indelVal && matrix[row - 1, col - 1] + diagVal <= matrix[row, col - 1] + indelVal)
{
prev[row, col] = DIAG;
return(matrix[row - 1, col - 1] + diagVal);
}
else if (matrix[row - 1, col] + indelVal < matrix[row - 1, col - 1] + diagVal && matrix[row - 1, col] + indelVal <= matrix[row, col - 1] + indelVal)
{
prev[row, col] = UP;
return(matrix[row - 1, col] + indelVal);
}
else
{
prev[row, col] = LEFT;
return(matrix[row, col - 1] + indelVal);
}
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
MyAligner aligner = new MyAligner(sequenceA.Sequence, sequenceB.Sequence, banded, MaxCharactersToAlign);
;
aligner.ExecuteAlignment();
// ********* these are placeholder assignments that you'll replace with your code *******
score = aligner.GetCost();
alignment[0] = aligner.GetAlignedSequenceA();
alignment[1] = aligner.GetAlignedSequenceB();
// ***************************************************************************************
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return(result);
}
public GeneSequence[] ReadGeneSequences(int max)
{
GeneSequence[] result;
try
{
m_accessConn.Open();
// Find number of problems
OleDbCommand countSequencesCommand = new OleDbCommand("SELECT MAX(ID) FROM DNA", m_accessConn);
int sequenceCount = (int)countSequencesCommand.ExecuteScalar();
if (sequenceCount < max)
{
result = new GeneSequence[sequenceCount];
}
else
{
result = new GeneSequence[max];
}
// TODO: LIMIT the number of entries returned
OleDbCommand selectCommand = new OleDbCommand("SELECT TOP " + result.Length + " * FROM DNA ", m_accessConn);
OleDbDataReader reader = selectCommand.ExecuteReader();
for (int i = 0; reader.Read() && i < result.Length; ++i)
{
result[i] = new GeneSequence(reader.GetString(1), reader.GetString(2));
}
}
finally
{
m_accessConn.Close();
}
return(result);
}
public GeneSequence[] ReadGeneSequences(int max)
{
GeneSequence[] result;
try
{
m_accessConn.Open();
// Find number of problems
OleDbCommand countSequencesCommand = new OleDbCommand("SELECT MAX(ID) FROM DNA", m_accessConn);
int sequenceCount = (int)countSequencesCommand.ExecuteScalar();
if (sequenceCount < max)
result = new GeneSequence[sequenceCount];
else
result = new GeneSequence[max];
// TODO: LIMIT the number of entries returned
OleDbCommand selectCommand = new OleDbCommand("SELECT TOP " + result.Length + " * FROM DNA ", m_accessConn);
OleDbDataReader reader = selectCommand.ExecuteReader();
for (int i = 0; reader.Read() && i < result.Length; ++i)
{
result[i] = new GeneSequence(reader.GetString(1), reader.GetString(2));
}
}
finally
{
m_accessConn.Close();
}
return result;
}
public void WriteGeneSequence(GeneSequence geneSequence)
{
//writemessage("writing to database...");
try
{
// because the sequence can be so long, we need to use parameters
//string insertCommandString = "INSERT INTO DNA (Name, Sequence) VALUES (?, ?)";
string insertCommandString = "INSERT INTO DNA (Name, Sequence) VALUES (?, ?)";
//string insertCommandString = "INSERT INTO DNA VALUES (3, ?, ?)";
OleDbCommand insertCommand = new OleDbCommand(insertCommandString, m_accessConn);
ASCIIEncoding encoding = new ASCIIEncoding();
insertCommand.Parameters.Add(new OleDbParameter("name", geneSequence.Name));
//insertCommand.Parameters.Add(new OleDbParameter("name", encoding.GetBytes(geneSequence.Name.ToCharArray())));
int a = geneSequence.Name.Length;
//insertCommand.Parameters.Add(new OleDbParameter("sequence", geneSequence.Sequence.ToCharArray()));
insertCommand.Parameters.Add(new OleDbParameter("sequence", geneSequence.Sequence));
m_accessConn.Open();
insertCommand.ExecuteNonQuery();
}
/*catch (Exception e)
{
//writemessage("Error trying to write the results to the database");
//writemessage(e.ToString());
return;
}*/
finally
{
m_accessConn.Close();
}
//writemessage("done writing to database. See the row in the tProblems table with problem = " + currentProblem + " to see what happened.");
}
private GeneSequence[] loadFile(string fileName)
{
StreamReader reader = new StreamReader(fileName);
string input = "";
try
{
input = reader.ReadToEnd();
}
catch
{
Console.WriteLine("Error Parsing File...");
return null;
}
finally
{
reader.Close();
}
GeneSequence[] temp = new GeneSequence[NUMBER_OF_SEQUENCES];
string[] inputLines = input.Split('\r');
for (int i = 0; i < NUMBER_OF_SEQUENCES; i++)
{
string[] line = inputLines[i].Replace("\n","").Split('#');
temp[i] = new GeneSequence(line[0], line[1]);
}
return temp;
}
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////// Banded Algorithm //////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
* This function performs the banded algorithm on the two sequences using dynamic programming to come up with
* the best alignment for both. The band is set to whatever the distance is. Currently it is d = 3 which makes the
* bandwidth equals 2d+1 = 7.
* Time Complexity: O(n+m) where n is the length of the first sequence and m is the length of the second sequence. This
* is because the algorithm iterates over a specific number of cells for each row and column. As we don't
* care about constants, the time would depend on the length of sequence A and B. Meaning each time
* the array size is increased by a row or a column, we have to compute those bandwidth number of cells
* again, so it is O(n+m).
* Space Complexity: O(nm) where n is the length of the first sequence and m is the length of the second sequence. This
* is because the algorithm creates an array of n x m
*/
void bandedAlgorithm(ref int score, ref string[] alignment, ref GeneSequence sequenceA, ref GeneSequence sequenceB)
{
// Limiting the lengths of the sequences to the max characters to align
int lengthOfSequenceA = Math.Min(sequenceA.Sequence.Length, MaxCharactersToAlign);
int lengthOfSequenceB = Math.Min(sequenceB.Sequence.Length, MaxCharactersToAlign);
// Create two arrays to hold the intermediate values and the alignment details
int[,] values = new int[lengthOfSequenceA + 1, lengthOfSequenceB + 1];
directions[,] prev = new directions[lengthOfSequenceA + 1, lengthOfSequenceB + 1];
// first fill first row and column with cost of inserts/deletes
fillStartCells(ref values, ref prev, lengthOfSequenceA, lengthOfSequenceB, true);
int columnStart = 1;
bool alignmentFound = false;
int row = 1;
int column = columnStart;
// Now iterate through the rest of the cells filling out the min value for each
for (row = 1; row < lengthOfSequenceA + 1; row++)
{
for (column = columnStart; column < lengthOfSequenceB + 1; column++)
{
if ((distance + row) < column)
{
break;
}
// Compute values for each direction
int costOfTop_Delete = values[row - 1, column] + 5;
if ((distance + row) == column)
{
costOfTop_Delete = int.MaxValue;
}
int costOfLeft_Insert = values[row, column - 1] + 5;
if ((distance + column) == row)
{
costOfLeft_Insert = int.MaxValue;
}
// Compute cost of moving from diagonal depending on whether the letters match
int costOfMovingFromDiagonal = (sequenceA.Sequence[row - 1] == sequenceB.Sequence[column - 1]) ? -3 : 1;
int costOfDiagonal = values[row - 1, column - 1] + costOfMovingFromDiagonal;
// value of cell would be the minimum cost out of the three directions
int costOfMin = Math.Min(costOfDiagonal, Math.Min(costOfLeft_Insert, costOfTop_Delete));
values[row, column] = costOfMin;
// Store the direction
if (costOfMin == costOfDiagonal)
{
prev[row, column] = directions.DIAGONAL;
}
else if (costOfMin == costOfLeft_Insert)
{
prev[row, column] = directions.LEFT;
}
else
{
prev[row, column] = directions.TOP;
}
if (column == lengthOfSequenceB && row == lengthOfSequenceA)
alignmentFound = true;
}
if (row > distance)
columnStart++;
}
// score would be value of the last cell
if (alignmentFound)
{
score = values[lengthOfSequenceA, lengthOfSequenceB];
// Create the alignments
createAlignments(ref alignment, ref prev, ref sequenceA, ref sequenceB,
ref lengthOfSequenceA, ref lengthOfSequenceB);
}
else {
score = int.MaxValue;
alignment[0] = "No Alignment Possible";
alignment[1] = "No Alignment Possible";
}
}
private void initialize(GeneSequence sequenceA, GeneSequence sequenceB)
{
// grab first 5000 (or all if less than 5000) characters of each sequence
charA = formatSequence(sequenceA.Sequence, MaxCharactersToAlign).ToCharArray();
charB = formatSequence(sequenceB.Sequence, MaxCharactersToAlign).ToCharArray();
resultRow = new int[charB.Length + 1];
// initialize bottom row with costs for INDEL
for (int i = 0; i < resultRow.Length; i++)
resultRow[i] = i * INDEL;
}
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////// Unrestricted Algorithm ////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/**
* This function performs the unrestricted algorithm on the two sequences using dynamic programming to come up with
* the best alignment for both.
* Time Complexity: O(nm) where n is the length of the first sequence and m is the length of the second sequence. This
* is because the algorithm iterates over all cells in the array of n x m
* Space Complexity: O(nm) where n is the length of the first sequence and m is the length of the second sequence. This
* is because the algorithm creates an array of n x m
*/
void unrestrictedAlgorithm (ref int score, ref string[] alignment, ref GeneSequence sequenceA, ref GeneSequence sequenceB)
{
// Limiting the lengths of the sequences to the max characters to align
int lengthOfSequenceA = Math.Min(sequenceA.Sequence.Length, MaxCharactersToAlign);
int lengthOfSequenceB = Math.Min(sequenceB.Sequence.Length, MaxCharactersToAlign);
// Create two arrays to hold the intermediate values and the alignment details
int[,] values = new int[lengthOfSequenceA + 1, lengthOfSequenceB + 1];
directions[,] prev = new directions[lengthOfSequenceA + 1, lengthOfSequenceB + 1];
// first fill first row and column with cost of inserts/deletes
fillStartCells(ref values, ref prev, lengthOfSequenceA, lengthOfSequenceB, false);
// Now iterate through the rest of the cells filling out the min value for each
for (int row = 1; row < lengthOfSequenceA + 1; row++)
{
for (int column = 1; column < lengthOfSequenceB + 1; column++)
{
// Compute values for each direction
int costOfTop_Delete = values[row - 1, column] + 5;
int costOfLeft_Insert = values[row, column - 1] + 5;
// Compute cost of moving from diagonal depending on whether the letters match
int costOfMovingFromDiagonal = (sequenceA.Sequence[row - 1] == sequenceB.Sequence[column - 1]) ? -3 : 1;
int costOfDiagonal = values[row - 1, column - 1] + costOfMovingFromDiagonal;
// value of cell would be the minimum cost out of the three directions
int costOfMin = Math.Min(costOfTop_Delete, Math.Min(costOfLeft_Insert, costOfDiagonal));
values[row, column] = costOfMin;
// Store the direction
if (costOfMin == costOfDiagonal)
{
prev[row, column] = directions.DIAGONAL;
}
else if (costOfMin == costOfLeft_Insert)
{
prev[row, column] = directions.LEFT;
}
else
{
prev[row, column] = directions.TOP;
}
}
}
// score would be value of the last cell
score = values[lengthOfSequenceA, lengthOfSequenceB];
// Create the alignments
createAlignments(ref alignment, ref prev, ref sequenceA, ref sequenceB, ref lengthOfSequenceA, ref lengthOfSequenceB);
}
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="resultTableSoFar">the table of alignment results that has been generated so far using pair-wise alignment</param>
/// <param name="rowInTable">this particular alignment problem will occupy a cell in this row the result table.</param>
/// <param name="columnInTable">this particular alignment will occupy a cell in this column of the result table.</param>
/// <returns>the alignment score for sequenceA and sequenceB. The calling function places the result in entry rowInTable,columnInTable
/// of the ResultTable</returns>
public int Align(GeneSequence sequenceA, GeneSequence sequenceB, ResultTable resultTableSoFar, int rowInTable, int columnInTable)
{
// a place holder computation. You'll want to implement your code here.
return (Math.Abs(sequenceA.Sequence.Length - sequenceB.Sequence.Length));
}
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/// <summary>
/// this is the function you implement.
/// </summary>
/// <param name="sequenceA">the first sequence</param>
/// <param name="sequenceB">the second sequence, may have length not equal to the length of the first seq.</param>
/// <param name="banded">true if alignment should be band limited.</param>
/// <returns>the alignment score and the alignment (in a Result object) for sequenceA and sequenceB. The calling function places the result in the dispay appropriately.
///
public ResultTable.Result Align_And_Extract(GeneSequence sequenceA, GeneSequence sequenceB, bool banded)
{
ResultTable.Result result = new ResultTable.Result();
int score; // place your computed alignment score here
string[] alignment = new string[2]; // place your two computed alignments here
// ********* these are placeholder assignments that you'll replace with your code *******
score = 0;
alignment[0] = "";
alignment[1] = "";
// ***************************************************************************************
if (!banded)
unrestrictedAlgorithm(ref score, ref alignment, ref sequenceA, ref sequenceB);
else
bandedAlgorithm(ref score, ref alignment, ref sequenceA, ref sequenceB);
result.Update(score, alignment[0], alignment[1]); // bundling your results into the right object type
return (result);
}