private static Envelopes LoadEVP1FromStream(EndianBinaryReader reader, long chunkStart)
{
Envelopes envelopes = new Envelopes();
ushort numEnvelopes = reader.ReadUInt16();
reader.ReadUInt16(); // Padding
// numEnvelope many uint8 - each one describes how many bones belong to this index.
uint boneCountOffset = reader.ReadUInt32();
// "sum over all bytes in boneCountOffset many shorts (index into some joint stuff? into matrix table?)"
uint indexDataOffset = reader.ReadUInt32();
// Bone Weights (as many floats here as there are ushorts at indexDataOffset)
uint weightOffset = reader.ReadUInt32();
// Matrix Table (3x4 float array) - Inverse Bind Pose
uint boneMatrixOffset = reader.ReadUInt32();
// - Is this the number of bones which influence the vert?
reader.BaseStream.Position = chunkStart + boneCountOffset;
for (int b = 0; b < numEnvelopes; b++)
envelopes.numBonesAffecting.Add(reader.ReadByte());
// ???
reader.BaseStream.Position = chunkStart + indexDataOffset;
for (int m = 0; m < envelopes.numBonesAffecting.Count; m++)
{
for (int j = 0; j < envelopes.numBonesAffecting[m]; j++)
{
envelopes.indexRemap.Add(reader.ReadUInt16());
}
}
// Bone Weights
reader.BaseStream.Position = chunkStart + weightOffset;
for (int w = 0; w < envelopes.numBonesAffecting.Count; w++)
{
for (int j = 0; j < envelopes.numBonesAffecting[w]; j++)
{
envelopes.weights.Add(reader.ReadSingle());
}
}
// Inverse Bind Pose Matrices
reader.BaseStream.Position = chunkStart + boneMatrixOffset;
for (int w = 0; w < numEnvelopes; w++)
{
Matrix3x4 matrix = new Matrix3x4();
for (int j = 0; j < 3; j++)
{
for (int k = 0; k < 4; k++)
matrix[j, k] = reader.ReadSingle();
}
envelopes.inverseBindPose.Add(matrix);
}
return envelopes;
}
public void Load(EndianBinaryReader stream)
{
if (stream == null || stream.BaseStream.Length == 0)
throw new ArgumentException("Null or empty stream specified", "stream");
// Read the header
byte entryCount = stream.ReadByte();
stream.Skip(3); // Unknown Constants (0x5E, 0, 0x61)
// Offset to the first entry (realistically it's right after the header and always 0x8
int offsetToFirstEntry = stream.ReadInt32();
// Load categories and their entries.
stream.BaseStream.Position = offsetToFirstEntry;
for(int i = 0; i < entryCount; i++)
{
Category category = new Category();
category.Load(stream);
Categories.Add(category);
}
}
public void Load(EndianBinaryReader stream)
{
long streamPos = stream.BaseStream.Position;
DisplayName = Encoding.GetEncoding("shift-jis").GetString(stream.ReadBytesUntil(0));
stream.BaseStream.Position = streamPos + 0x21;
MapName = Encoding.GetEncoding("shift-jis").GetString(stream.ReadBytesUntil(0));
stream.BaseStream.Position = streamPos + 0x29;
RoomIndex = stream.ReadByte();
SpawnIndex = stream.ReadByte();
LayerIndex = (Layer)stream.ReadByte();
}
private static void LoadSHP1SectionFromFile(MeshVertexAttributeHolder vertexData, Mesh j3dMesh, EndianBinaryReader reader, long chunkStart)
{
short batchCount = reader.ReadInt16();
short padding = reader.ReadInt16();
int batchOffset = reader.ReadInt32();
int unknownTableOffset = reader.ReadInt32(); // Another one of those 0->(n-1) counters. I think all sections have it? Might be part of the way they used inheritance to write files.
int alwaysZero = reader.ReadInt32(); Trace.Assert(alwaysZero == 0);
int attributeOffset = reader.ReadInt32();
int matrixTableOffset = reader.ReadInt32();
int primitiveDataOffset = reader.ReadInt32();
int matrixDataOffset = reader.ReadInt32();
int packetLocationOffset = reader.ReadInt32();
// Batches can have different attributes (ie: some have pos, some have normal, some have texcoords, etc.) they're split by batches,
// where everything in the batch uses the same set of vertex attributes. Each batch then has several packets, which are a collection
// of primitives.
for (int b = 0; b < batchCount; b++)
{
MeshBatch meshBatch = new MeshBatch();
j3dMesh.SubMeshes.Add(meshBatch);
int overallVertexCount = 0;
meshBatch.PrimitveType = OpenTK.Graphics.OpenGL.PrimitiveType.TriangleStrip; // HackHack, this varies per primitive.
// We need to look on each primitive and convert them to trianglestrips, most are TS some are TF's.
// We re-use the list struct here to dynamically add paired pos/col/tex as we load them
// then we convert them into arrays for the MeshBatch afterwards.
MeshVertexAttributeHolder meshVertexData = new MeshVertexAttributeHolder();
// chunkStart + batchOffset gets you the position where the batches are listed
// 0x28 * b gives you the right batch - a batch is 0x28 in length
reader.BaseStream.Position = chunkStart + batchOffset + (0x28 * b);
long batchStart = reader.BaseStream.Position;
byte matrixType = reader.ReadByte();
Trace.Assert(reader.ReadByte() == 0xFF); // Padding
ushort packetCount = reader.ReadUInt16();
ushort batchAttributeOffset = reader.ReadUInt16();
ushort firstMatrixIndex = reader.ReadUInt16();
ushort firstPacketIndex = reader.ReadUInt16();
ushort unknownpadding = reader.ReadUInt16(); Trace.Assert(unknownpadding == 0xFFFF);
float boundingSphereDiameter = reader.ReadSingle();
Vector3 boundingBoxMin = new Vector3();
boundingBoxMin.X = reader.ReadSingle();
boundingBoxMin.Y = reader.ReadSingle();
boundingBoxMin.Z = reader.ReadSingle();
Vector3 boundingBoxMax = new Vector3();
boundingBoxMax.X = reader.ReadSingle();
boundingBoxMax.Y = reader.ReadSingle();
boundingBoxMax.Z = reader.ReadSingle();
// We need to figure out how many primitive attributes there are in the SHP1 section. This can differ from the number of
// attributes in the VTX1 section, as the SHP1 can also include things like PositionMatrixIndex, so the count can be different.
// This also varies *per batch* as not all batches will have the things like PositionMatrixIndex.
reader.BaseStream.Position = chunkStart + attributeOffset + batchAttributeOffset;
var batchAttributes = new List<ShapeAttribute>();
do
{
ShapeAttribute attribute = new ShapeAttribute();
attribute.ArrayType = (VertexArrayType)reader.ReadInt32();
attribute.DataType = (VertexDataType)reader.ReadInt32();
if (attribute.ArrayType == VertexArrayType.NullAttr)
break;
batchAttributes.Add(attribute);
} while (true);
for (ushort p = 0; p < packetCount; p++)
{
// Packet Location
reader.BaseStream.Position = chunkStart + packetLocationOffset;
reader.BaseStream.Position += (firstPacketIndex + p) * 0x8; // A Packet Location is 0x8 long, so we skip ahead to the right one.
int packetSize = reader.ReadInt32();
int packetOffset = reader.ReadInt32();
// Read the matrix data for this packet
reader.BaseStream.Position = chunkStart + matrixDataOffset + (firstMatrixIndex + p) * 0x08;
ushort matrixUnknown0 = reader.ReadUInt16();
ushort matrixCount = reader.ReadUInt16();
uint matrixFirstIndex = reader.ReadUInt32();
// Skip ahead to the actual data.
reader.BaseStream.Position = chunkStart + matrixTableOffset + (matrixFirstIndex * 0x2);
List<ushort> matrixTable = new List<ushort>();
for (int m = 0; m < matrixCount; m++)
{
matrixTable.Add(reader.ReadUInt16());
}
// Jump the read head to the location of the primitives for this packet.
reader.BaseStream.Position = chunkStart + primitiveDataOffset + packetOffset;
int numVertexesAtPacketStart = meshVertexData.PositionMatrixIndexes.Count;
uint numPrimitiveBytesRead = 0;
while (numPrimitiveBytesRead < packetSize)
{
// Jump to the primitives
// Primitives
GXPrimitiveType type = (GXPrimitiveType)reader.ReadByte();
// Game pads the chunks out with zeros, so this is the signal for an early break;
if (type == 0 || numPrimitiveBytesRead >= packetSize)
break;
ushort vertexCount = reader.ReadUInt16();
meshBatch.PrimitveType = type == GXPrimitiveType.TriangleStrip ? OpenTK.Graphics.OpenGL.PrimitiveType.TriangleStrip : OpenTK.Graphics.OpenGL.PrimitiveType.TriangleFan;
//if (type != GXPrimitiveType.TriangleStrip)
//{
// WLog.Warning(LogCategory.ModelLoading, null, "Unsupported GXPrimitiveType {0}", type);
//}
numPrimitiveBytesRead += 0x3; // Advance us by 3 for the Primitive header.
for (int v = 0; v < vertexCount; v++)
{
meshVertexData.Indexes.Add(overallVertexCount);
overallVertexCount++;
// Iterate through the attribute types. I think the actual vertices are stored in interleaved format,
// ie: there's say 13 vertexes but those 13 vertexes will have a pos/color/tex index listed after it
// depending on the overall attributes of the file.
for (int attrib = 0; attrib < batchAttributes.Count; attrib++)
{
// Jump to primitive location
//reader.BaseStream.Position = chunkStart + primitiveDataOffset + numPrimitiveBytesRead + packetOffset;
// Now that we know how big the vertex type is stored in (either a Signed8 or a Signed16) we can read that much data
// and then we can use that index and index into
int val = 0;
uint numBytesRead = 0;
switch (batchAttributes[attrib].DataType)
{
case VertexDataType.Signed8:
val = reader.ReadByte();
numBytesRead = 1;
break;
case VertexDataType.Signed16:
val = reader.ReadInt16();
numBytesRead = 2;
break;
default:
WLog.Warning(LogCategory.ModelLoading, null, "Unknown Batch Index Type: {0}", batchAttributes[attrib].DataType);
break;
}
// Now that we know what the index is, we can retrieve it from the appropriate array
// and stick it into our vertex. The J3D format removes all duplicate vertex attributes
// so we need to re-duplicate them here so that we can feed them to a PC GPU in a normal fashion.
switch (batchAttributes[attrib].ArrayType)
{
case VertexArrayType.Position:
meshVertexData.Position.Add(vertexData.Position[val]);
break;
case VertexArrayType.PositionMatrixIndex:
meshVertexData.PositionMatrixIndexes.Add(val);
break;
case VertexArrayType.Normal:
meshVertexData.Normal.Add(vertexData.Normal[val]);
break;
case VertexArrayType.Color0:
meshVertexData.Color0.Add(vertexData.Color0[val]);
break;
case VertexArrayType.Color1:
meshVertexData.Color1.Add(vertexData.Color1[val]);
break;
case VertexArrayType.Tex0:
meshVertexData.Tex0.Add(vertexData.Tex0[val]);
break;
case VertexArrayType.Tex1:
meshVertexData.Tex1.Add(vertexData.Tex1[val]);
break;
case VertexArrayType.Tex2:
meshVertexData.Tex2.Add(vertexData.Tex2[val]);
break;
case VertexArrayType.Tex3:
meshVertexData.Tex3.Add(vertexData.Tex3[val]);
break;
case VertexArrayType.Tex4:
meshVertexData.Tex4.Add(vertexData.Tex4[val]);
break;
case VertexArrayType.Tex5:
meshVertexData.Tex5.Add(vertexData.Tex5[val]);
break;
case VertexArrayType.Tex6:
meshVertexData.Tex6.Add(vertexData.Tex6[val]);
break;
case VertexArrayType.Tex7:
meshVertexData.Tex7.Add(vertexData.Tex7[val]);
break;
default:
WLog.Warning(LogCategory.ModelLoading, null, "Unsupported attribType {0}", batchAttributes[attrib].ArrayType);
break;
}
numPrimitiveBytesRead += numBytesRead;
}
// Gonna try a weird hack, where if the mesh doesn't have PMI values, we're going to use just use the packet index into the matrixtable
// so that all meshes always have PMI values, to abstract out the ones that don't seem to (but still have matrixtable) junk. It's a guess
// here.
if (batchAttributes.Find(x => x.ArrayType == VertexArrayType.PositionMatrixIndex) == null)
{
meshVertexData.PositionMatrixIndexes.Add(p);
}
}
// After we write a primitive, write a special null-terminator which signifies the GPU to do a primitive restart for the next tri-strip.
meshVertexData.Indexes.Add(0xFFFF);
}
// The Matrix Table is per-packet, so we need to reach into the the matrix table after processing each packet
// and transform the indexes. Yuck. Yay.
for (int j = numVertexesAtPacketStart; j < meshVertexData.PositionMatrixIndexes.Count; j++)
{
// Yes you divide this by 3. No, no one knows why. $20 to the person who figures out why.
meshBatch.drawIndexes.Add(matrixTable[meshVertexData.PositionMatrixIndexes[j] / 3]);
}
}
meshBatch.Vertices = meshVertexData.Position.ToArray();
meshBatch.Color0 = meshVertexData.Color0.ToArray();
meshBatch.Color1 = meshVertexData.Color1.ToArray();
meshBatch.TexCoord0 = meshVertexData.Tex0.ToArray();
meshBatch.TexCoord1 = meshVertexData.Tex0.ToArray();
meshBatch.TexCoord2 = meshVertexData.Tex0.ToArray();
meshBatch.TexCoord3 = meshVertexData.Tex0.ToArray();
meshBatch.TexCoord4 = meshVertexData.Tex0.ToArray();
meshBatch.TexCoord5 = meshVertexData.Tex0.ToArray();
meshBatch.TexCoord6 = meshVertexData.Tex0.ToArray();
meshBatch.TexCoord7 = meshVertexData.Tex0.ToArray();
meshBatch.Indexes = meshVertexData.Indexes.ToArray();
meshBatch.PositionMatrixIndexs = meshVertexData.PositionMatrixIndexes; // This should be obsolete as they should be transformed already.
}
}
public static ZUD FromStream(EndianBinaryReader reader)
{
/*=====================================================================
ZUD HEADER
=====================================================================*/
byte IDCharacter = reader.ReadByte();
byte IDWeapon = reader.ReadByte();
byte IDWeaponCategory = reader.ReadByte();
byte IDWeaponMaterial = reader.ReadByte();
byte IDShield = reader.ReadByte();
byte IDShieldMaterial = reader.ReadByte();
byte unknown = reader.ReadByte();
reader.SkipByte();
UInt32 ptrCharacterSHP = reader.ReadUInt32();
UInt32 lenCharacterSHP = reader.ReadUInt32();
UInt32 ptrWeaponWEP = reader.ReadUInt32();
UInt32 lenWeaponWEP= reader.ReadUInt32();
UInt32 ptrShieldWEP = reader.ReadUInt32();
UInt32 lenShieldWEP = reader.ReadUInt32();
UInt32 ptrCommonSEQ = reader.ReadUInt32();
UInt32 lenCommonSEQ = reader.ReadUInt32();
UInt32 ptrBattleSEQ = reader.ReadUInt32();
UInt32 lenBattleSEQ = reader.ReadUInt32();
/*=====================================================================
STREAM READER
=====================================================================*/
ZUD zud = new ZUD();
if (lenCharacterSHP != 0)
{
zud.Character = SHPLoader.FromStream(reader);
}
if (lenWeaponWEP != 0)
{
zud.HasWeapon = true;
reader.BaseStream.Seek(ptrWeaponWEP, System.IO.SeekOrigin.Begin);
zud.Weapon = WEPLoader.FromStream(reader);
}
if (lenShieldWEP != 0)
{
zud.HasShield = true;
reader.BaseStream.Seek(ptrShieldWEP, System.IO.SeekOrigin.Begin);
zud.Shield = WEPLoader.FromStream(reader);
}
if (lenCommonSEQ != 0)
{
zud.HasCommon = true;
reader.BaseStream.Seek(ptrCommonSEQ, System.IO.SeekOrigin.Begin);
zud.Common = SEQLoader.FromStream(reader, zud.Character);
}
if (lenBattleSEQ != 0)
{
zud.HasBattle = true;
reader.BaseStream.Seek(ptrBattleSEQ, System.IO.SeekOrigin.Begin);
zud.Battle = SEQLoader.FromStream(reader, zud.Character);
}
return zud;
}
