private void ServiceHelper_ServiceStarted(object sender, EventArgs e)
{
// Initialize config.
ConfigurationFile config = ConfigurationFile.Current;
CategorizedSettingsElementCollection settings = config.Settings["SystemSettings"];
// Connect to source.
m_source = new TcpClient();
m_source.ConnectionString = string.Format("Server={0}", settings["Source"].Value);
m_source.ConnectionAttempt += SourceClient_ConnectionAttempt;
m_source.ConnectionEstablished += SourceClient_ConnectionEstablished;
m_source.ConnectionTerminated += SourceClient_ConnectionTerminated;
m_source.ReceiveDataComplete += SourceClient_ReceiveDataComplete;
m_source.ConnectAsync();
m_serviceHelper.ServiceComponents.Add(m_source);
// Connect to target.
m_targets = new List<TcpClient>();
foreach (string item in settings["Target"].Value.Replace(',', ';').Split(';'))
{
TcpClient target = new TcpClient();
target.ConnectionString = string.Format("Server={0}", item.Trim());
target.ConnectionAttempt += TargetClient_ConnectionAttempt;
target.ConnectionEstablished += TargetClient_ConnectionEstablished;
target.ConnectionTerminated += TargetClient_ConnectionTerminated;
target.ReceiveDataException += TargetClient_ReceiveDataException;
target.ConnectAsync();
m_serviceHelper.ServiceComponents.Add(target);
}
}
private TcpClient InitializeTcpClient()
{
TcpClient remotingClient;
remotingClient = new TcpClient();
remotingClient.ConnectionString = "Server=localhost:8500";
remotingClient.IgnoreInvalidCredentials = true;
remotingClient.PayloadAware = true;
remotingClient.PersistSettings = true;
remotingClient.SettingsCategory = "RemotingClient";
remotingClient.Initialize();
return remotingClient;
}
/// <summary>
/// Initializes <see cref="DataSubscriber"/>.
/// </summary>
public override void Initialize()
{
base.Initialize();
Dictionary<string, string> settings = Settings;
string setting;
OperationalModes operationalModes;
CompressionModes compressionModes;
int metadataSynchronizationTimeout;
double interval;
int bufferSize;
// Setup connection to data publishing server with or without authentication required
if (settings.TryGetValue("requireAuthentication", out setting))
RequireAuthentication = setting.ParseBoolean();
// See if user has opted for different operational modes
if (settings.TryGetValue("operationalModes", out setting) && Enum.TryParse(setting, true, out operationalModes))
OperationalModes = operationalModes;
// Set the security mode if explicitly defined
if (!settings.TryGetValue("securityMode", out setting) || !Enum.TryParse(setting, true, out m_securityMode))
m_securityMode = SecurityMode.None;
// Apply gateway compression mode to operational mode flags
if (settings.TryGetValue("compressionModes", out setting) && Enum.TryParse(setting, true, out compressionModes))
CompressionModes = compressionModes;
if (settings.TryGetValue("useZeroMQChannel", out setting))
m_useZeroMQChannel = setting.ParseBoolean();
// TODO: Remove this exception when CURVE is enabled in GSF ZeroMQ library
if (m_useZeroMQChannel && m_securityMode == SecurityMode.TLS)
throw new ArgumentException("CURVE security settings are not yet available for GSF ZeroMQ client channel.");
// Settings specific to Gateway security
if (m_securityMode == SecurityMode.Gateway)
{
if (!settings.TryGetValue("sharedSecret", out m_sharedSecret) || string.IsNullOrWhiteSpace(m_sharedSecret))
throw new ArgumentException("The \"sharedSecret\" setting must be defined when using Gateway security mode.");
if (!settings.TryGetValue("authenticationID", out m_authenticationID) || string.IsNullOrWhiteSpace(m_authenticationID))
throw new ArgumentException("The \"authenticationID\" setting must be defined when using Gateway security mode.");
}
// Settings specific to Transport Layer Security
if (m_securityMode == SecurityMode.TLS)
{
if (!settings.TryGetValue("localCertificate", out m_localCertificate) || !File.Exists(m_localCertificate))
m_localCertificate = GetLocalCertificate();
if (!settings.TryGetValue("remoteCertificate", out m_remoteCertificate) || !RemoteCertificateExists())
throw new ArgumentException("The \"remoteCertificate\" setting must be defined and certificate file must exist when using TLS security mode.");
if (!settings.TryGetValue("validPolicyErrors", out setting) || !Enum.TryParse(setting, out m_validPolicyErrors))
m_validPolicyErrors = SslPolicyErrors.None;
if (!settings.TryGetValue("validChainFlags", out setting) || !Enum.TryParse(setting, out m_validChainFlags))
m_validChainFlags = X509ChainStatusFlags.NoError;
if (settings.TryGetValue("checkCertificateRevocation", out setting) && !string.IsNullOrWhiteSpace(setting))
m_checkCertificateRevocation = setting.ParseBoolean();
else
m_checkCertificateRevocation = true;
}
// Check if measurements for this connection should be marked as "internal" - i.e., owned and allowed for proxy
if (settings.TryGetValue("internal", out setting))
m_internal = setting.ParseBoolean();
// Check if user has explicitly defined the ReceiveInternalMetadata flag
if (settings.TryGetValue("receiveInternalMetadata", out setting))
ReceiveInternalMetadata = setting.ParseBoolean();
// Check if user has explicitly defined the ReceiveExternalMetadata flag
if (settings.TryGetValue("receiveExternalMetadata", out setting))
ReceiveExternalMetadata = setting.ParseBoolean();
// Check if user has defined a meta-data synchronization timeout
if (settings.TryGetValue("metadataSynchronizationTimeout", out setting) && int.TryParse(setting, out metadataSynchronizationTimeout))
m_metadataSynchronizationTimeout = metadataSynchronizationTimeout;
// Check if user has defined a flag for using a transaction during meta-data synchronization
if (settings.TryGetValue("useTransactionForMetadata", out setting))
m_useTransactionForMetadata = setting.ParseBoolean();
// Check if user wants to request that publisher use millisecond resolution to conserve bandwidth
if (settings.TryGetValue("useMillisecondResolution", out setting))
m_useMillisecondResolution = setting.ParseBoolean();
// Check if user wants to request that publisher remove NaN from the data stream to conserve bandwidth
if (settings.TryGetValue("requestNaNValueFilter", out setting))
m_requestNaNValueFilter = setting.ParseBoolean();
// Check if user has defined any meta-data filter expressions
if (settings.TryGetValue("metadataFilters", out setting))
m_metadataFilters = setting;
// Define auto connect setting
if (settings.TryGetValue("autoConnect", out setting))
{
m_autoConnect = setting.ParseBoolean();
if (m_autoConnect)
m_autoSynchronizeMetadata = true;
}
// Define the maximum allowed exceptions before resetting the connection
if (settings.TryGetValue("allowedParsingExceptions", out setting))
m_allowedParsingExceptions = int.Parse(setting);
// Define the window of time over which parsing exceptions are tolerated
if (settings.TryGetValue("parsingExceptionWindow", out setting))
m_parsingExceptionWindow = Ticks.FromSeconds(double.Parse(setting));
// Check if synchronize meta-data is explicitly enabled or disabled
if (settings.TryGetValue("synchronizeMetadata", out setting))
m_autoSynchronizeMetadata = setting.ParseBoolean();
// Define data loss interval
if (settings.TryGetValue("dataLossInterval", out setting) && double.TryParse(setting, out interval))
DataLossInterval = interval;
// Define buffer size
if (!settings.TryGetValue("bufferSize", out setting) || !int.TryParse(setting, out bufferSize))
bufferSize = ClientBase.DefaultReceiveBufferSize;
if (settings.TryGetValue("useLocalClockAsRealTime", out setting))
m_useLocalClockAsRealTime = setting.ParseBoolean();
if (m_autoConnect)
{
// Connect to local events when automatically engaging connection cycle
ConnectionAuthenticated += DataSubscriber_ConnectionAuthenticated;
MetaDataReceived += DataSubscriber_MetaDataReceived;
// Update output measurements to include "subscribed" points
UpdateOutputMeasurements(true);
}
else if (m_autoSynchronizeMetadata)
{
// Output measurements do not include "subscribed" points,
// but should still be filtered if applicable
TryFilterOutputMeasurements();
}
if (m_securityMode != SecurityMode.TLS)
{
if (m_useZeroMQChannel)
{
// Create a new ZeroMQ Dealer
ZeroMQClient commandChannel = new ZeroMQClient();
// Initialize default settings
commandChannel.PersistSettings = false;
commandChannel.MaxConnectionAttempts = 1;
commandChannel.ReceiveBufferSize = bufferSize;
commandChannel.SendBufferSize = bufferSize;
// Assign command channel client reference and attach to needed events
CommandChannel = commandChannel;
}
else
{
// Create a new TCP client
TcpClient commandChannel = new TcpClient();
// Initialize default settings
commandChannel.PayloadAware = true;
commandChannel.PersistSettings = false;
commandChannel.MaxConnectionAttempts = 1;
commandChannel.ReceiveBufferSize = bufferSize;
commandChannel.SendBufferSize = bufferSize;
// Assign command channel client reference and attach to needed events
CommandChannel = commandChannel;
}
}
else
{
if (m_useZeroMQChannel)
{
// Create a new ZeroMQ Dealer with CURVE security enabled
ZeroMQClient commandChannel = new ZeroMQClient();
// Initialize default settings
commandChannel.PersistSettings = false;
commandChannel.MaxConnectionAttempts = 1;
commandChannel.ReceiveBufferSize = bufferSize;
commandChannel.SendBufferSize = bufferSize;
// TODO: Parse certificate and pass keys to ZeroMQClient for CURVE security
// Assign command channel client reference and attach to needed events
CommandChannel = commandChannel;
}
else
{
// Create a new TLS client and certificate checker
TlsClient commandChannel = new TlsClient();
SimpleCertificateChecker certificateChecker = new SimpleCertificateChecker();
// Set up certificate checker
certificateChecker.TrustedCertificates.Add(new X509Certificate2(FilePath.GetAbsolutePath(m_remoteCertificate)));
certificateChecker.ValidPolicyErrors = m_validPolicyErrors;
certificateChecker.ValidChainFlags = m_validChainFlags;
// Initialize default settings
commandChannel.PayloadAware = true;
commandChannel.PersistSettings = false;
commandChannel.MaxConnectionAttempts = 1;
commandChannel.CertificateFile = FilePath.GetAbsolutePath(m_localCertificate);
commandChannel.CheckCertificateRevocation = m_checkCertificateRevocation;
commandChannel.CertificateChecker = certificateChecker;
commandChannel.ReceiveBufferSize = bufferSize;
commandChannel.SendBufferSize = bufferSize;
// Assign command channel client reference and attach to needed events
CommandChannel = commandChannel;
}
}
// Get proper connection string - either from specified command channel or from base connection string
if (settings.TryGetValue("commandChannel", out setting))
m_commandChannel.ConnectionString = setting;
else
m_commandChannel.ConnectionString = ConnectionString;
// Get logging path, if any has been defined
if (settings.TryGetValue("loggingPath", out setting))
{
setting = FilePath.GetDirectoryName(FilePath.GetAbsolutePath(setting));
if (Directory.Exists(setting))
m_loggingPath = setting;
else
OnStatusMessage("WARNING: Logging path \"{0}\" not found, defaulting to \"{1}\"...", setting, FilePath.GetAbsolutePath(""));
}
// Initialize data gap recovery processing, if requested
if (settings.TryGetValue("dataGapRecovery", out setting))
{
// Make sure setting exists to allow user to by-pass phasor data source validation at startup
ConfigurationFile configFile = ConfigurationFile.Current;
CategorizedSettingsElementCollection systemSettings = configFile.Settings["systemSettings"];
CategorizedSettingsElement dataGapRecoveryEnabledSetting = systemSettings["DataGapRecoveryEnabled"];
// See if this node should process phasor source validation
if ((object)dataGapRecoveryEnabledSetting == null || dataGapRecoveryEnabledSetting.ValueAsBoolean())
{
// Example connection string for data gap recovery:
// dataGapRecovery={enabled=true; recoveryStartDelay=10.0; minimumRecoverySpan=0.0; maximumRecoverySpan=3600.0}
Dictionary<string, string> dataGapSettings = setting.ParseKeyValuePairs();
if (dataGapSettings.TryGetValue("enabled", out setting) && setting.ParseBoolean())
{
// Remove dataGapRecovery connection setting from command channel connection string, if defined there.
// This will prevent any recursive data gap recovery operations from being established:
Dictionary<string, string> connectionSettings = m_commandChannel.ConnectionString.ParseKeyValuePairs();
connectionSettings.Remove("dataGapRecovery");
connectionSettings.Remove("autoConnect");
connectionSettings.Remove("synchronizeMetadata");
connectionSettings.Remove("outputMeasurements");
// Note that the data gap recoverer will connect on the same command channel port as
// the real-time subscriber (TCP only)
m_dataGapRecoveryEnabled = true;
m_dataGapRecoverer = new DataGapRecoverer();
m_dataGapRecoverer.SourceConnectionName = Name;
m_dataGapRecoverer.DataSource = DataSource;
m_dataGapRecoverer.ConnectionString = string.Join("; ", $"autoConnect=false; synchronizeMetadata=false{(string.IsNullOrWhiteSpace(m_loggingPath) ? "" : "; loggingPath=" + m_loggingPath)}", dataGapSettings.JoinKeyValuePairs(), connectionSettings.JoinKeyValuePairs());
m_dataGapRecoverer.FilterExpression = this.OutputMeasurementKeys().Select(key => key.SignalID.ToString()).ToDelimitedString(';');
m_dataGapRecoverer.RecoveredMeasurements += m_dataGapRecoverer_RecoveredMeasurements;
m_dataGapRecoverer.StatusMessage += m_dataGapRecoverer_StatusMessage;
m_dataGapRecoverer.ProcessException += m_dataGapRecoverer_ProcessException;
m_dataGapRecoverer.Initialize();
}
else
{
m_dataGapRecoveryEnabled = false;
}
}
}
else
{
m_dataGapRecoveryEnabled = false;
}
// Register subscriber with the statistics engine
StatisticsEngine.Register(this, "Subscriber", "SUB");
StatisticsEngine.Calculated += (sender, args) => ResetMeasurementsPerSecondCounters();
Initialized = true;
}
/// <summary>
/// Initializes a new instance of the <see cref="RemoteOutputAdapter"/> class.
/// </summary>
public RemoteOutputAdapter()
{
m_historianPublisher = new TcpClient();
m_publisherWaitHandle = new ManualResetEvent(false);
m_port = DefaultHistorianPort;
m_payloadAware = DefaultPayloadAware;
m_conserveBandwidth = DefaultConserveBandwidth;
m_outputIsForArchive = DefaultOutputIsForArchive;
m_throttleTransmission = DefaultThrottleTransmission;
m_samplesPerTransmission = DefaultSamplesPerTransmission;
}
/// <summary>
/// Initializes a new instance of the <see cref="DataListener"/> class.
/// </summary>
public DataListener()
{
m_id = DefaultID;
m_server = DefaultServer;
m_port = DefaultPort;
m_protocol = DefaultProtocol;
m_connectToServer = DefaultConnectToServer;
m_cacheData = DefaultCacheData;
m_initializeData = DefaultInitializeData;
m_initializeDataTimeout = DefaultInitializeDataTimeout;
m_persistSettings = DefaultPersistSettings;
m_settingsCategory = DefaultSettingsCategory;
m_data = new List<IDataPoint>();
m_clientIDs = new ConcurrentDictionary<IClient, Guid>();
m_initializeWaitHandle = new AutoResetEvent(false);
m_parser = new PacketParser();
m_parser.DataParsed += PacketParser_DataParsed;
m_tcpClient = new TcpClient();
m_tcpClient.ConnectionAttempt += ClientSocket_ConnectionAttempt;
m_tcpClient.ConnectionEstablished += ClientSocket_ConnectionEstablished;
m_tcpClient.ConnectionTerminated += ClientSocket_ConnectionTerminated;
m_tcpClient.ReceiveDataComplete += ClientSocket_ReceiveDataComplete;
m_clientIDs.TryAdd(m_tcpClient, Guid.NewGuid());
m_udpClient = new UdpClient();
m_udpClient.ConnectionAttempt += ClientSocket_ConnectionAttempt;
m_udpClient.ConnectionEstablished += ClientSocket_ConnectionEstablished;
m_udpClient.ConnectionTerminated += ClientSocket_ConnectionTerminated;
m_udpClient.ReceiveDataComplete += ClientSocket_ReceiveDataComplete;
m_clientIDs.TryAdd(m_udpClient, Guid.NewGuid());
m_tcpServer = new TcpServer();
m_tcpServer.ServerStarted += ServerSocket_ServerStarted;
m_tcpServer.ServerStopped += ServerSocket_ServerStopped;
m_tcpServer.ReceiveClientDataComplete += ServerSocket_ReceiveClientDataComplete;
m_dataInitClient = new TcpClient();
m_dataInitClient.ConnectionString = "Server={0}:1003; interface=0.0.0.0";
m_dataInitClient.PayloadAware = true;
m_dataInitClient.MaxConnectionAttempts = 10;
m_dataInitClient.ReceiveDataComplete += DataInitClient_ReceiveDataComplete;
}
/// <summary>
/// Create a communications client
/// </summary>
/// <remarks>
/// Note that typical connection string should be prefixed with a "protocol=tcp", "protocol=udp", "protocol=serial" or "protocol=file"
/// </remarks>
/// <returns>A communications client.</returns>
/// <param name="connectionString">Connection string for the client.</param>
public static IClient Create(string connectionString)
{
Dictionary<string, string> connectionSettings = connectionString.ParseKeyValuePairs();
IClient client;
string protocol;
if (connectionSettings.TryGetValue("protocol", out protocol))
{
connectionSettings.Remove("protocol");
StringBuilder settings = new StringBuilder();
foreach (string key in connectionSettings.Keys)
{
settings.Append(key);
settings.Append("=");
settings.Append(connectionSettings[key]);
settings.Append(";");
}
// Create a client instance for the specified protocol.
switch (protocol.Trim().ToLower())
{
case "tls":
client = new TlsClient(settings.ToString());
break;
case "tcp":
client = new TcpClient(settings.ToString());
break;
case "udp":
client = new UdpClient(settings.ToString());
break;
case "file":
client = new FileClient(settings.ToString());
break;
case "serial":
client = new SerialClient(settings.ToString());
break;
case "zeromq":
client = new ZeroMQClient(settings.ToString());
break;
default:
throw new ArgumentException(protocol + " is not a valid transport protocol");
}
// Apply client settings from the connection string to the client.
foreach (KeyValuePair<string, string> setting in connectionSettings)
{
PropertyInfo property = client.GetType().GetProperty(setting.Key);
if (property != null)
property.SetValue(client, Convert.ChangeType(setting.Value, property.PropertyType), null);
}
}
else
{
throw new ArgumentException("Transport protocol must be specified");
}
return client;
}
private TcpClient InitializeTcpClient(string connectionString)
{
Dictionary<string, string> settings;
string setting;
TcpClient remotingClient;
// Initialize remoting client socket.
remotingClient = new TcpClient();
remotingClient.ConnectionString = connectionString;
remotingClient.PayloadAware = true;
remotingClient.IgnoreInvalidCredentials = true;
remotingClient.MaxConnectionAttempts = -1;
// Parse connection string into key-value pairs
settings = connectionString.ParseKeyValuePairs();
// See if user wants to connect to remote service using integrated security
if (settings.TryGetValue("integratedSecurity", out setting) && !string.IsNullOrWhiteSpace(setting))
remotingClient.IntegratedSecurity = setting.ParseBoolean();
return remotingClient;
}
/// <summary>
/// Initializes <see cref="DataSubscriber"/>.
/// </summary>
public override void Initialize()
{
base.Initialize();
Dictionary<string, string> settings = Settings;
string setting;
double interval;
// Setup connection to data publishing server with or without authentication required
if (settings.TryGetValue("requireAuthentication", out setting))
m_requireAuthentication = setting.ParseBoolean();
else
m_requireAuthentication = false;
if (m_requireAuthentication)
{
if (!settings.TryGetValue("sharedSecret", out m_sharedSecret) && !m_sharedSecret.IsNullOrWhiteSpace())
throw new ArgumentException("The \"sharedSecret\" setting must defined when authentication is required.");
if (!settings.TryGetValue("authenticationID", out m_authenticationID) && !m_authenticationID.IsNullOrWhiteSpace())
throw new ArgumentException("The \"authenticationID\" setting must defined when authentication is required.");
}
// Check if synchronize metadata is disabled.
if (settings.TryGetValue("synchronizeMetadata", out setting))
m_synchronizeMetadata = setting.ParseBoolean();
else
m_synchronizeMetadata = true; // by default, we will always perform this.
// Check if measurements for this connection should be marked as "internal" - i.e., owned and allowed for proxy
if (settings.TryGetValue("internal", out setting))
m_internal = setting.ParseBoolean();
// Check if we should be using the alternate binary format for communications with the publisher
if (settings.TryGetValue("operationalModes", out setting))
m_operationalModes = (OperationalModes)uint.Parse(setting);
// Check if user wants to request that publisher use millisecond resolution to conserve bandwidth
if (settings.TryGetValue("useMillisecondResolution", out setting))
m_useMillisecondResolution = setting.ParseBoolean();
// Define auto connect setting
if (settings.TryGetValue("autoConnect", out setting))
m_autoConnect = setting.ParseBoolean();
// Define data loss interval
if (settings.TryGetValue("dataLossInterval", out setting) && double.TryParse(setting, out interval))
DataLossInterval = interval;
if (m_autoConnect)
{
// Connect to local events when automatically engaging connection cycle
ConnectionAuthenticated += DataSubscriber_ConnectionAuthenticated;
MetaDataReceived += DataSubscriber_MetaDataReceived;
// If active measurements are defined, attempt to defined desired subscription points from there
if (DataSource != null && (object)DataSource.Tables != null && DataSource.Tables.Contains("ActiveMeasurements"))
{
try
{
// Filter to points associated with this subscriber that have been requested for subscription, are enabled and not owned locally
DataRow[] filteredRows = DataSource.Tables["ActiveMeasurements"].Select("Subscribed <> 0");
List<IMeasurement> subscribedMeasurements = new List<IMeasurement>();
MeasurementKey key;
Guid signalID;
foreach (DataRow row in filteredRows)
{
// Create a new measurement for the provided field level information
Measurement measurement = new Measurement();
// Parse primary measurement identifier
signalID = row["SignalID"].ToNonNullString(Guid.Empty.ToString()).ConvertToType<Guid>();
// Set measurement key if defined
if (MeasurementKey.TryParse(row["ID"].ToString(), signalID, out key))
measurement.Key = key;
// Assign other attributes
measurement.ID = signalID;
measurement.TagName = row["PointTag"].ToNonNullString();
measurement.Multiplier = double.Parse(row["Multiplier"].ToString());
measurement.Adder = double.Parse(row["Adder"].ToString());
subscribedMeasurements.Add(measurement);
}
if (subscribedMeasurements.Count > 0)
{
// Combine subscribed output measurement with any existing output measurement and return unique set
if (OutputMeasurements == null)
OutputMeasurements = subscribedMeasurements.ToArray();
else
OutputMeasurements = subscribedMeasurements.Concat(OutputMeasurements).Distinct().ToArray();
}
}
catch (Exception ex)
{
// Errors here may not be catastrophic, this simply limits the auto-assignment of input measurement keys desired for subscription
OnProcessException(new InvalidOperationException(string.Format("Failed to define subscribed measurements: {0}", ex.Message), ex));
}
}
}
// Create a new TCP client
TcpClient commandChannel = new TcpClient();
// Initialize default settings
commandChannel.ConnectionString = "server=localhost:6165";
commandChannel.PayloadAware = true;
commandChannel.PersistSettings = false;
commandChannel.MaxConnectionAttempts = 1;
// Assign command channel client reference and attach to needed events
this.CommandChannel = commandChannel;
// Get proper connection string - either from specified command channel
// or from base connection string
if (settings.TryGetValue("commandChannel", out setting))
commandChannel.ConnectionString = setting;
else
commandChannel.ConnectionString = ConnectionString;
// Register subscriber with the statistics engine
//StatisticsEngine.Register(this, "Subscriber", "SUB");
Initialized = true;
}
/// <summary>
/// Releases the unmanaged resources used by the <see cref="DataSubscriber"/> object and optionally releases the managed resources.
/// </summary>
/// <param name="disposing">true to release both managed and unmanaged resources; false to release only unmanaged resources.</param>
protected override void Dispose(bool disposing)
{
if (!m_disposed)
{
try
{
if (disposing)
{
DataLossInterval = 0.0D;
CommandChannel = null;
DataChannel = null;
DisposeLocalConcentrator();
}
}
finally
{
m_disposed = true; // Prevent duplicate dispose.
base.Dispose(disposing); // Call base class Dispose().
}
}
}