// constructor
private SolutionEventHandlers(DTE dte, DTE2 dte2)
{
ThreadHelper.ThrowIfNotOnUIThread();
_dte = dte;
_dte2 = dte2;
myEvents = dte.Events;
myDocumentEvents = dte.Events.DocumentEvents;
myDocumentEvents.DocumentOpened += (doc) =>
{
// The outer delegate is synchronous, but kicks off async work via a method that accepts an async delegate.
_ = ThreadHelper.JoinableTaskFactory.RunAsync(async delegate
{
await myDocumentEvents_DocumentOpenedAsync(doc);
});
};
myDocumentEvents.DocumentSaved += (doc) =>
{
// The outer delegate is synchronous, but kicks off async work via a method that accepts an async delegate.
_ = ThreadHelper.JoinableTaskFactory.RunAsync(async delegate
{
await myDocumentEvents_DocumentSavedAsync(doc);
});
};
CSharpProjectItemsEvents = (ProjectItemsEvents)dte.Events.GetObject("CSharpProjectItemsEvents");
CSharpProjectItemsEvents.ItemRenamed += CSharpItemRenamed;
myEvents.SolutionEvents.Opened += SolutionEvents_Opened;
_VSOutputWindow = new VSOutputWindow(_dte2);
}
public void BindEvents()
{
EnvDTE.Events events = m_applicationObject.Events;
m_solutionEvents = (EnvDTE.SolutionEvents)events.SolutionEvents;
m_buildEvents = (EnvDTE.BuildEvents)events.BuildEvents;
m_dteEvents = (EnvDTE.DTEEvents)events.DTEEvents;
m_debuggerEvents = (EnvDTE.DebuggerEvents)events.DebuggerEvents;
m_solutionEvents.AfterClosing += new _dispSolutionEvents_AfterClosingEventHandler(this.AfterClosing);
m_solutionEvents.BeforeClosing += new _dispSolutionEvents_BeforeClosingEventHandler(this.BeforeClosing);
m_solutionEvents.Opened += new _dispSolutionEvents_OpenedEventHandler(this.Opened);
m_solutionEvents.ProjectAdded += new _dispSolutionEvents_ProjectAddedEventHandler(this.ProjectAdded);
m_solutionEvents.ProjectRemoved += new _dispSolutionEvents_ProjectRemovedEventHandler(this.ProjectRemoved);
m_solutionEvents.ProjectRenamed += new _dispSolutionEvents_ProjectRenamedEventHandler(this.ProjectRenamed);
m_solutionEvents.QueryCloseSolution += new _dispSolutionEvents_QueryCloseSolutionEventHandler(this.QueryCloseSolution);
m_solutionEvents.Renamed += new _dispSolutionEvents_RenamedEventHandler(this.Renamed);
m_buildEvents.OnBuildBegin += new _dispBuildEvents_OnBuildBeginEventHandler(this.OnBuildBegin);
m_buildEvents.OnBuildDone += new _dispBuildEvents_OnBuildDoneEventHandler(this.OnBuildDone);
m_buildEvents.OnBuildProjConfigBegin += new _dispBuildEvents_OnBuildProjConfigBeginEventHandler(this.OnBuildProjConfigBegin);
m_buildEvents.OnBuildProjConfigDone += new _dispBuildEvents_OnBuildProjConfigDoneEventHandler(this.OnBuildProjConfigDone);
m_dteEvents.ModeChanged += new _dispDTEEvents_ModeChangedEventHandler(this.DTEModeChanged);
m_debuggerEvents.OnEnterRunMode += new _dispDebuggerEvents_OnEnterRunModeEventHandler(DebuggerOnEnterRunMode);
m_debuggerEvents.OnEnterDesignMode += new _dispDebuggerEvents_OnEnterDesignModeEventHandler(DebuggerOnEnterDesignMode);
}
/// <summary>Initialization of the package; this method is called right after the package is sited, so this is the place where you can put all the initialization code that rely on services provided by VisualStudio.</summary>
protected override void Initialize()
{
try
{
Trace.WriteLine(string.Format(CultureInfo.CurrentCulture, "Entering Initialize() of: {0}", this.ToString()));
base.Initialize();
// Add our command handlers for menu (commands must exist in the .vsct file)
OleMenuCommandService mcs = GetService(typeof(IMenuCommandService)) as OleMenuCommandService;
if (mcs != null)
{
// Create the command for the tool window
CommandID toolwndCommandID = new CommandID(GuidList.guidSpiraExplorerCmdSet, (int)PkgCmdIDList.cmdViewExplorerWindow);
MenuCommand menuToolWin = new MenuCommand(ShowToolWindow, toolwndCommandID);
mcs.AddCommand(menuToolWin);
}
//Attach to the environment to get events..
this._EnvironEvents = Business.StaticFuncs.GetEnvironment.Events;
this._SolEvents = Business.StaticFuncs.GetEnvironment.Events.SolutionEvents;
if (this._EnvironEvents != null && this._SolEvents != null)
{
this._SolEvents.Opened += new EnvDTE._dispSolutionEvents_OpenedEventHandler(SolutionEvents_Opened);
this._SolEvents.AfterClosing += new EnvDTE._dispSolutionEvents_AfterClosingEventHandler(SolutionEvents_AfterClosing);
this._SolEvents.Renamed += new EnvDTE._dispSolutionEvents_RenamedEventHandler(SolutionEvents_Renamed);
}
}
catch (Exception ex)
{
Logger.LogMessage(ex, "Initialize()");
MessageBox.Show(StaticFuncs.getCultureResource.GetString("app_General_UnexpectedError"), StaticFuncs.getCultureResource.GetString("app_General_ApplicationShortName"), MessageBoxButton.OK, MessageBoxImage.Error);
}
}
/// <summary>
/// Method for creating and writting to a debug window
/// </summary>
/// <param name="application"></param>
/// <param name="message"></param>
public void WriteToOutputWindow(DTE2 application, string message)
{
try
{
EnvDTE.Events events = application.Events;
OutputWindow outputWindow = (OutputWindow)application.Windows.Item(Constants.vsWindowKindOutput).Object;
// Find the "Test Pane" Output window pane; if it doesn't exist,
// create it.
OutputWindowPane pane = null;
try
{
pane = outputWindow.OutputWindowPanes.Item("Format SQL");
}
catch
{
pane = outputWindow.OutputWindowPanes.Add("Format SQL");
}
// Show the Output window and activate the new pane.
outputWindow.Parent.AutoHides = false;
outputWindow.Parent.Activate();
pane.Activate();
// Add a line of text to the new pane.
pane.OutputString(message + "\r\n");
}
catch
{
//MessageBox.Show(message, "T-SQL Tidy Error");
}
}
/// <summary>Implements the OnConnection method of the IDTExtensibility2 interface. Receives notification that the Add-in is being loaded.</summary>
/// <param term='application'>Root object of the host application.</param>
/// <param term='connectMode'>Describes how the Add-in is being loaded.</param>
/// <param term='addInInst'>Object representing this Add-in.</param>
/// <seealso class='IDTExtensibility2' />
public void OnConnection(object application, ext_ConnectMode connectMode, object addInInst, ref Array custom)
{
_applicationObject = (DTE2)application;
_addInInstance = (AddIn)addInInst;
// Retrieve the event objects from the automation model.
EnvDTE.Events events = _applicationObject.Events;
// Send event messages to the Output window.
OutputWindow outputWindow = (OutputWindow)_applicationObject.Windows.Item(Constants.vsWindowKindOutput).Object;
//Constants.vsWindowKindMainWindow;
outputWindowPane = outputWindow.OutputWindowPanes.Add("DTE Event Information");
// Retrieve the event objects from the automation model.
events.SelectionEvents.OnChange += new _dispSelectionEvents_OnChangeEventHandler(this.SelectionEvents_OnChange);
events.get_CommandEvents("{00000000-0000-0000-0000-000000000000}", 0).AfterExecute += new _dispCommandEvents_AfterExecuteEventHandler(this.AfterExecuteEventHandler);
winEvents =
(EnvDTE.WindowEvents)events.get_WindowEvents(null);
// Connect to each delegate exposed from each object
// retrieved above.
winEvents.WindowActivated += new
_dispWindowEvents_WindowActivatedEventHandler
(this.WindowActivated);
winEvents.WindowClosing += new
_dispWindowEvents_WindowClosingEventHandler
(this.WindowClosing);
winEvents.WindowCreated += new
_dispWindowEvents_WindowCreatedEventHandler
(this.WindowCreated);
winEvents.WindowMoved += new
_dispWindowEvents_WindowMovedEventHandler
(this.WindowMoved);
}
public void OnConnection(object app, Extensibility.ext_ConnectMode mode, object addin, ref System.Array custom)
{
appobj_ = (_DTE)app;
addin_ = (AddIn)addin;
EnvDTE.Events events = appobj_.Events;
events_ = (EnvDTE.WindowEvents)events.get_WindowEvents();
handler_ = new _dispWindowEvents_WindowActivatedEventHandler(this.OnWindowActivated);
events_.WindowActivated += handler_;
}
private Root(DTE dte)
{
_dte = dte;
myEvents = dte.Events;
myDocumentEvents = dte.Events.DocumentEvents;
myDocumentEvents.DocumentSaved += myDocumentEvents_DocumentSaved;
myDocumentEvents.DocumentOpened += MyDocumentEvents_DocumentOpened;
CSharpProjectItemsEvents = (ProjectItemsEvents)dte.Events.GetObject("CSharpProjectItemsEvents");
CSharpProjectItemsEvents.ItemRenamed += CSharpItemRenamed;
}
public void ensureDTE()
{
if (_dte == null)
{
_dte = (DTE2)GetService(typeof(DTE));
_dteEvents = _dte.Events;
_buildEvents = _dteEvents.BuildEvents;
_buildEvents.OnBuildBegin += BeforeBuild;
}
}
public static void Initialize(IServiceProvider serviceProvider)
{
applicationObject = serviceProvider.GetService(typeof(SDTE)) as EnvDTE80.DTE2;//EnvDTE80.DTE2;
//Need to keep strong reference to _events and _documentEvents otherwise they will be garbage collected
_events = applicationObject.Events;
_documentEvents = _events.DocumentEvents;
_documentEvents.DocumentSaved += OnDocumentSaved;
_documentEvents.DocumentClosing += OnDocumentClosing;
}
// constructor
private SolutionEventHandlers(DTE dte, DTE2 dte2)
{
_dte = dte;
_dte2 = dte2;
myEvents = dte.Events;
myDocumentEvents = dte.Events.DocumentEvents;
myDocumentEvents.DocumentSaved += myDocumentEvents_DocumentSaved;
CSharpProjectItemsEvents = (ProjectItemsEvents)dte.Events.GetObject("CSharpProjectItemsEvents");
CSharpProjectItemsEvents.ItemRenamed += CSharpItemRenamed;
myEvents.SolutionEvents.Opened += SolutionEvents_Opened;
_VSOutputWindow = new VSOutputWindow(_dte2);
}
// constructor
private Root(DTE dte)
{
_dte = dte;
myEvents = dte.Events;
myDocumentEvents = dte.Events.DocumentEvents;
myDocumentEvents.DocumentSaved += myDocumentEvents_DocumentSaved;
myDocumentEvents.DocumentOpened += MyDocumentEvents_DocumentOpened;
CSharpProjectItemsEvents = (ProjectItemsEvents)dte.Events.GetObject("CSharpProjectItemsEvents");
CSharpProjectItemsEvents.ItemRenamed += CSharpItemRenamed;
myEvents.SolutionEvents.Opened += SolutionEvents_Opened;
myEvents.BuildEvents.OnBuildBegin += BuildEvents_OnBuildBegin;
}
public void OnConnection(object application, Extensibility.ext_ConnectMode connectMode, object addInInst, ref System.Array custom)
{
applicationObject = (_DTE)application;
addInInstance = (AddIn)addInInst;
// Add code for How-To.
// Initialize all the variables that contain the events we're looking for.
// Get the events object that contains information about all of the
// extensibility events.
m_Events = ((DTE)(application)).Events;
// Initialize a variable to track SolutionEvents
m_SolutionEvents = m_Events.SolutionEvents;
// Initialize a variable to track BuildEvents
m_BuildEvents = m_Events.BuildEvents;
m_BuildEvents.OnBuildBegin += new _dispBuildEvents_OnBuildBeginEventHandler(m_BuildEvents_OnBuildBegin);
m_SolutionEvents.AfterClosing += new _dispSolutionEvents_AfterClosingEventHandler(m_SolutionEvents_AfterClosing);
m_SolutionEvents.Opened += new _dispSolutionEvents_OpenedEventHandler(m_SolutionEvents_Opened);
m_SolutionEvents.ProjectAdded += new _dispSolutionEvents_ProjectAddedEventHandler(m_SolutionEvents_ProjectAdded);
m_SolutionEvents.ProjectRemoved += new _dispSolutionEvents_ProjectRemovedEventHandler(m_SolutionEvents_ProjectRemoved);
m_SolutionEvents.ProjectRenamed += new _dispSolutionEvents_ProjectRenamedEventHandler(m_SolutionEvents_ProjectRenamed);
}
/// <summary>
/// Registers handlers for the Activated and Closing events from the text window.
/// </summary>
public void AddWindowEvents()
{
_events = (EnvDTE80.Events2)_dte.Events;
_windowsEvents = (EnvDTE.WindowEvents)_events.get_WindowEvents(null);
_windowsEvents.WindowActivated += new EnvDTE._dispWindowEvents_WindowActivatedEventHandler(windowsEvents_WindowActivated);
_windowsEvents.WindowClosing += new EnvDTE._dispWindowEvents_WindowClosingEventHandler(windowsEvents_WindowClosing);
}
/// <summary>
/// Registers handlers for certain solution events.
/// </summary>
public void AddSolutionEvents()
{
_events = (EnvDTE80.Events2)_dte.Events;
_solnEvents = (EnvDTE.SolutionEvents)_events.SolutionEvents;
_solnEvents.QueryCloseSolution += new _dispSolutionEvents_QueryCloseSolutionEventHandler(solnEvents_QueryCloseSolution);
_solnEvents.Opened += new _dispSolutionEvents_OpenedEventHandler(solnEvents_Opened);
}
protected override async System.Threading.Tasks.Task InitializeAsync(CancellationToken cancellationToken, IProgress <ServiceProgressData> progress)
{
await ThreadHelper.JoinableTaskFactory.SwitchToMainThreadAsync();
App.Initialize(GetDialogPage(typeof(OptionsPage)) as OptionsPage);
Instance = this;
//var componentModel = (IComponentModel)GetService(typeof(SComponentModel));
// Add our command handlers for menu (commands must exist in the .vsct file)
if (await GetServiceAsync(typeof(IMenuCommandService)) is OleMenuCommandService menuCommandService)
{
// //var mainMenu = new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet, (int)PkgCmdIDList.CmdidMainMenu);
// //var founded = menuCommandService.FindCommand(mainMenu);
// //if (founded == null)
// //{
// // var menuCommand2 = new OleMenuCommand(null, mainMenu);
// // menuCommandService.AddCommand(menuCommand2);
// // menuCommand2.BeforeQueryStatus += MenuCommand2_BeforeQueryStatus;
// // menuCommand2.Visible = false;
// //}
var menuCommand = new OleMenuCommand(CallWebFileToggle, new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet, (int)PkgCmdIDList.CmdidWebFileToggle));
menuCommand.BeforeQueryStatus += MenuCommand_BeforeQueryStatus;
menuCommandService.AddCommand(menuCommand);
menuCommandService.AddCommand(new MenuCommand(CallFixtureFileToggle,
new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet,
(int)PkgCmdIDList.CmdidFixtureFileToggle)));
menuCommandService.AddCommand(new MenuCommand(CallFileFinder,
new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet,
(int)PkgCmdIDList.CmdidFileFinder)));
menuCommandService.AddCommand(new MenuCommand(CallMemberFinder,
new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet,
(int)PkgCmdIDList.CmdidMemberFinder)));
menuCommandService.AddCommand(new MenuCommand(CallCssFinder,
new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet,
(int)PkgCmdIDList.CmdidCSSFinder)));
menuCommandService.AddCommand(new MenuCommand(CallGotoNextFoundItem,
new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet,
(int)PkgCmdIDList.CmdidGotoNextFoundItem)));
menuCommandService.AddCommand(new MenuCommand(CallGotoPreviousFoundItem,
new CommandID(GuidList.GuidGeeksProductivityToolsCmdSet,
(int)PkgCmdIDList.CmdidGotoPreviousFoundItem)));
}
SetCommandBindings();
// Hook up event handlers
events = App.DTE.Events;
docEvents = events.DocumentEvents;
solEvents = events.SolutionEvents;
solEvents.Opened += delegate { App.Initialize(GetDialogPage(typeof(OptionsPage)) as OptionsPage); };
// //ServiceCreatorCallback callback = new ServiceCreatorCallback(CreateService);
// //((IServiceContainer)this).AddService(typeof(SMyService), callback);
}
/// <summary>实现 IDTExtensibility2 接口的 OnConnection 方法。接收正在加载外接程序的通知。</summary>
/// <param term='application'>宿主应用程序的根对象。</param>
/// <param term='connectMode'>描述外接程序的加载方式。</param>
/// <param term='addInInst'>表示此外接程序的对象。</param>
/// <seealso class='IDTExtensibility2' />
public void OnConnection(object application, ext_ConnectMode connectMode, object addInInst, ref Array custom)
{
_applicationObject = (DTE2)application;
_addInInstance = (AddIn)addInInst;
OutputWindow outputWindow = (OutputWindow)_applicationObject.Windows.Item(Constants.vsWindowKindOutput).Object;
bool bbuildok = true;
try
{
m_OutputWindowPane = outputWindow.OutputWindowPanes.Item("生成");
}
catch
{
//我们试图查找“工具”一词的本地化版本，但未能找到。
// 默认值为 en-US 单词，该值可能适用于当前区域性。
bbuildok = false;
}
if (!bbuildok)
{
try
{
m_OutputWindowPane = outputWindow.OutputWindowPanes.Item("Build");
}
catch
{
//我们试图查找“工具”一词的本地化版本，但未能找到。
// 默认值为 en-US 单词，该值可能适用于当前区域性。
bbuildok = false;
}
}
// Register for the various build events taht we're hooking in to
EnvDTE.Events events = _applicationObject.Events;
m_BuildEvents = (EnvDTE.BuildEvents)events.BuildEvents;
m_BuildEvents.OnBuildProjConfigBegin += new _dispBuildEvents_OnBuildProjConfigBeginEventHandler(OnBuildProjConfigBegin);
m_BuildEvents.OnBuildProjConfigDone += new _dispBuildEvents_OnBuildProjConfigDoneEventHandler(OnBuildProjConfigDone);
m_BuildEvents.OnBuildBegin += new _dispBuildEvents_OnBuildBeginEventHandler(this.OnBuildBegin);
m_BuildEvents.OnBuildDone += new _dispBuildEvents_OnBuildDoneEventHandler(this.OnBuildDone);
m_envcfgs = new ThkEnvCfgs();
if (m_envcfgs.LoadConfig())
{
ThkEnvConfig enc = m_envcfgs.GetCurEnvConfig();
if (enc != null)
{
//if (m_OutputWindowPane != null)
//{
// m_OutputWindowPane.OutputString("现在开始自动设置配置信息中的环境变量\n");
//}
ThkEnvCfgItem[] encitems = enc.EnvConfigItems;
foreach (ThkEnvCfgItem ci in encitems)
{
if (ci.EnvCfgFlatform == null || ci.EnvCfgFlatform.Length == 0 || ci.EnvCfgFlatform == "全部" || ci.EnvCfgFlatform == "")
{
Environment.SetEnvironmentVariable(ci.EnvCfgItem, ci.EnvCfgValue, EnvironmentVariableTarget.Process);
//if (m_OutputWindowPane !=null)
//{
// m_OutputWindowPane.OutputString(ci.EnvCfgItem + ":" + ci.EnvCfgValue+"\n");
//}
}
}
}
else
{
MessageBox.Show("获取配置中的环境变量信息失败");
}
}
else
{
MessageBox.Show("加载配置变量配置文件失败");
}
{
string path = System.Environment.CurrentDirectory;
Assembly myAssembly = Assembly.GetEntryAssembly();
if (myAssembly == null)
{
myAssembly = Assembly.GetExecutingAssembly();
}
if (myAssembly != null)
{
path = myAssembly.Location;
DirectoryInfo dr = new DirectoryInfo(path);
path = dr.Parent.FullName; //当前目录的上一级目录
}
Environment.SetEnvironmentVariable("THK_VS_ADDIN_PATH", path, EnvironmentVariableTarget.Process);
}
//debug
ThkVCDirSet vcset = m_envcfgs.GetVCConfig();
if (vcset != null && vcset.EnvConfigItems.Length < 2)
{
//vcset.AddVcConfig("VC6", @"D:\develop\VS60\VC98\", "");
//vcset.AddVcConfig("VC2003", @"D:\develop\vs2002\Vc7\", "");
//vcset.AddVcConfig("VC2003", @"D:\develop\vs2003\Vc7\", "");
//vcset.AddVcConfig("VC2005", @"D:\develop\vs2005\Vc\", "");
//vcset.AddVcConfig("VC2008", @"D:\develop\vs2008\Vc\", "");
//vcset.AddVcConfig("VC2010", @"D:\develop\vs2010\Vc\", "");
//vcset.AddVcConfig("VC2012", @"D:\develop\vs2012\Vc\", "");
//vcset.AddVcConfig("VC2013", @"D:\develop\vs2013\Vc\", "");
//m_envcfgs.SaveConfig();
}
//end of debug
if (connectMode == ext_ConnectMode.ext_cm_CommandLine || connectMode == ext_ConnectMode.ext_cm_AfterStartup || connectMode == ext_ConnectMode.ext_cm_UISetup ||
connectMode == ext_ConnectMode.ext_cm_Startup)
{
object[] contextGUIDS = new object[] { };
Commands2 commands = (Commands2)_applicationObject.Commands;
string toolsMenuName;
try
{
//若要将此命令移动到另一个菜单，则将“工具”一词更改为此菜单的英文版。
// 此代码将获取区域性，将其追加到菜单名中，然后将此命令添加到该菜单中。
// 您会在此文件中看到全部顶级菜单的列表
// CommandBar.resx.
string resourceName;
ResourceManager resourceManager = new ResourceManager("ThkDevEnc.CommandBar", Assembly.GetExecutingAssembly());
CultureInfo cultureInfo = new CultureInfo(_applicationObject.LocaleID);
if (cultureInfo.TwoLetterISOLanguageName == "zh")
{
System.Globalization.CultureInfo parentCultureInfo = cultureInfo.Parent;
resourceName = String.Concat(parentCultureInfo.Name, "Tools");
}
else
{
resourceName = String.Concat(cultureInfo.TwoLetterISOLanguageName, "Tools");
}
toolsMenuName = resourceManager.GetString(resourceName);
if (toolsMenuName == null || toolsMenuName.Length == 0)
{
toolsMenuName = "工具";
}
}
catch
{
//我们试图查找“工具”一词的本地化版本，但未能找到。
// 默认值为 en-US 单词，该值可能适用于当前区域性。
toolsMenuName = "Tools";
}
//将此命令置于“工具”菜单上。
//查找 MenuBar 命令栏，该命令栏是容纳所有主菜单项的顶级命令栏:
Microsoft.VisualStudio.CommandBars.CommandBar menuBarCommandBar = ((Microsoft.VisualStudio.CommandBars.CommandBars)_applicationObject.CommandBars)["MenuBar"];
//在 MenuBar 命令栏上查找“工具”命令栏:
CommandBarControl toolsControl = menuBarCommandBar.Controls[toolsMenuName];
CommandBarPopup toolsPopup = (CommandBarPopup)toolsControl;
//如果希望添加多个由您的外接程序处理的命令，可以重复此 try/catch 块，
// 只需确保更新 QueryStatus/Exec 方法，使其包含新的命令名。
//////////////try
//////////////{
////////////// //将一个命令添加到 Commands 集合:
////////////// Command command = commands.AddNamedCommand2(_addInInstance, "ProUnlock", "解锁ProE插件", "Executes the command for ProUnlock", true, 59, ref contextGUIDS, (int)vsCommandStatus.vsCommandStatusSupported + (int)vsCommandStatus.vsCommandStatusEnabled, (int)vsCommandStyle.vsCommandStylePictAndText, vsCommandControlType.vsCommandControlTypeButton);
////////////// //将对应于该命令的控件添加到“工具”菜单:
////////////// if ((command != null) && (toolsPopup != null))
////////////// {
////////////// command.AddControl(toolsPopup.CommandBar, 1);
////////////// }
//////////////}
//////////////catch (System.ArgumentException)
//////////////{
////////////// //如果出现此异常，原因很可能是由于具有该名称的命令
////////////// // 已存在。如果确实如此，则无需重新创建此命令，并且
////////////// // 可以放心忽略此异常。
//////////////}
try
{
//将一个命令添加到 Commands 集合:
Command command = commands.AddNamedCommand2(_addInInstance, "ProeAttach", "调试ProE", "Executes the command for ThkDevEnc", true, 59, ref contextGUIDS, (int)vsCommandStatus.vsCommandStatusSupported + (int)vsCommandStatus.vsCommandStatusEnabled, (int)vsCommandStyle.vsCommandStylePictAndText, vsCommandControlType.vsCommandControlTypeButton);
//将对应于该命令的控件添加到“工具”菜单:
if ((command != null) && (toolsPopup != null))
{
command.AddControl(toolsPopup.CommandBar, 1);
}
}
catch (System.ArgumentException)
{
//如果出现此异常，原因很可能是由于具有该名称的命令
// 已存在。如果确实如此，则无需重新创建此命令，并且
// 可以放心忽略此异常。
}
try
{
//将一个命令添加到 Commands 集合:
Command command = commands.AddNamedCommand2(_addInInstance, "CatiaAttach", "调试Catia", "Executes the command for ThkDevEnc", true, 59, ref contextGUIDS, (int)vsCommandStatus.vsCommandStatusSupported + (int)vsCommandStatus.vsCommandStatusEnabled, (int)vsCommandStyle.vsCommandStylePictAndText, vsCommandControlType.vsCommandControlTypeButton);
//将对应于该命令的控件添加到“工具”菜单:
if ((command != null) && (toolsPopup != null))
{
command.AddControl(toolsPopup.CommandBar, 1);
}
}
catch (System.ArgumentException)
{
//如果出现此异常，原因很可能是由于具有该名称的命令
// 已存在。如果确实如此，则无需重新创建此命令，并且
// 可以放心忽略此异常。
}
try
{
//将一个命令添加到 Commands 集合:
Command command = commands.AddNamedCommand2(_addInInstance, "DevEnvCfg", "森科开发环境", "Executes the command for ThkDevEnc", true, 59, ref contextGUIDS, (int)vsCommandStatus.vsCommandStatusSupported + (int)vsCommandStatus.vsCommandStatusEnabled, (int)vsCommandStyle.vsCommandStylePictAndText, vsCommandControlType.vsCommandControlTypeButton);
//将对应于该命令的控件添加到“工具”菜单:
if ((command != null) && (toolsPopup != null))
{
command.AddControl(toolsPopup.CommandBar, 1);
}
}
catch (System.ArgumentException)
{
//如果出现此异常，原因很可能是由于具有该名称的命令
// 已存在。如果确实如此，则无需重新创建此命令，并且
// 可以放心忽略此异常。
}
try
{
//将一个命令添加到 Commands 集合:
Command command = commands.AddNamedCommand2(_addInInstance, "VCSet", "当前编译环境", "Executes the command for ThkDevEnc", true, 59, ref contextGUIDS, (int)vsCommandStatus.vsCommandStatusSupported + (int)vsCommandStatus.vsCommandStatusEnabled, (int)vsCommandStyle.vsCommandStylePictAndText, vsCommandControlType.vsCommandControlTypeButton);
//将对应于该命令的控件添加到“工具”菜单:
if ((command != null) && (toolsPopup != null))
{
command.AddControl(toolsPopup.CommandBar, 1);
}
}
catch (System.ArgumentException)
{
//如果出现此异常，原因很可能是由于具有该名称的命令
// 已存在。如果确实如此，则无需重新创建此命令，并且
// 可以放心忽略此异常。
}
try
{
//将一个命令添加到 Commands 集合:
Command command = commands.AddNamedCommand2(_addInInstance, "UnAttach", "全部分离调试", "Executes the command for ThkDevEnc", true, 59, ref contextGUIDS, (int)vsCommandStatus.vsCommandStatusSupported + (int)vsCommandStatus.vsCommandStatusEnabled, (int)vsCommandStyle.vsCommandStylePictAndText, vsCommandControlType.vsCommandControlTypeButton);
//将对应于该命令的控件添加到“工具”菜单:
if ((command != null) && (toolsPopup != null))
{
command.AddControl(toolsPopup.CommandBar, 1);
}
}
catch (System.ArgumentException)
{
//如果出现此异常，原因很可能是由于具有该名称的命令
// 已存在。如果确实如此，则无需重新创建此命令，并且
// 可以放心忽略此异常。
}
try
{
//将一个命令添加到 Commands 集合:
Command command = commands.AddNamedCommand2(_addInInstance, "CopyFile", "文件拷贝", "Executes the command for ThkDevEnc", true, 59, ref contextGUIDS, (int)vsCommandStatus.vsCommandStatusSupported + (int)vsCommandStatus.vsCommandStatusEnabled, (int)vsCommandStyle.vsCommandStylePictAndText, vsCommandControlType.vsCommandControlTypeButton);
//将对应于该命令的控件添加到“工具”菜单:
if ((command != null) && (toolsPopup != null))
{
command.AddControl(toolsPopup.CommandBar, 1);
}
}
catch (System.ArgumentException)
{
//如果出现此异常，原因很可能是由于具有该名称的命令
// 已存在。如果确实如此，则无需重新创建此命令，并且
// 可以放心忽略此异常。
}
}
}
/// ------------------------------------------------------------------------------------
/// <summary>
/// Implements the OnConnection method of the IDTExtensibility2 interface.
/// Receives notification that the Add-in is being loaded.
/// </summary>
/// <param name="application">The application.</param>
/// <param name="connectMode">The connect mode.</param>
/// <param name="addInInst">The add in inst.</param>
/// <param name="custom">The custom.</param>
/// <seealso class="IDTExtensibility2"/>
/// ------------------------------------------------------------------------------------
public void OnConnection(object application, Extensibility.ext_ConnectMode connectMode,
object addInInst, ref System.Array custom)
{
try
{
CheckForUpdates();
m_dte = (DTE2)application;
m_nantCommands = new CmdHandler();
m_nantCommands.DTE = m_dte;
m_addInInstance = (AddIn)addInInst;
EnvDTE.Events events = DTE.Events;
OutputWindow outputWindow = (OutputWindow)DTE.Windows.Item(Constants.vsWindowKindOutput).Object;
m_solutionEvents = (EnvDTE.SolutionEvents)events.SolutionEvents;
// Get the commands of the Build group
RegisterCommandHandler(882, // build solution
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildSolution));
RegisterCommandHandler(883, // rebuild solution
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildSolution));
RegisterCommandHandler(886, // build project
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildProject));
RegisterCommandHandler(887, // rebuild project
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildProject));
RegisterCommandHandler(890, // Build Cancel
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildCancel));
RegisterCommandHandler(892, // build project (from context menu)
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildProject));
RegisterCommandHandler(893, // rebuild project (from context menu)
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildProject));
// 979-988 build project (from menu when no project item is selected)
// 989-998 rebuild project (from menu when no project item is selected)
for (int i = 979; i < 999; i++)
{
RegisterCommandHandler(i,
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnBuildProject));
}
RegisterCommandHandler(295, // Debug Start
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnDebugStart));
RegisterCommandHandler(356, // Debug/Start new instance (from context menu)
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnDebugStart));
RegisterCommandHandler(368, // Debug Start without debugging
new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnDebugStartWithoutDebugging));
// RegisterCommandHandler(248, // Debug Step into
// new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnDebugStepInto));
// RegisterCommandHandler(357, // Debug Step into (from context menu)
// new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnDebugStepInto));
// RegisterCommandHandler(249, // Debug Step over
// new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnDebugStepOver));
// RegisterCommandHandler(251, // Debug Run to cursor
// new _dispCommandEvents_BeforeExecuteEventHandler(m_nantCommands.OnDebugRunToCursor));
// TODO: need to handle 891 Batch build!
m_buildEvents = (EnvDTE.BuildEvents)events.BuildEvents;
m_solutionEvents.Opened += new _dispSolutionEvents_OpenedEventHandler(Opened);
m_solutionEvents.ProjectAdded += new _dispSolutionEvents_ProjectAddedEventHandler(OnProjectAdded);
m_buildEvents.OnBuildBegin += new _dispBuildEvents_OnBuildBeginEventHandler(OnBuildBegin);
// try to add the commands
AddToolbar();
}
catch (Exception e)
{
System.Diagnostics.Debug.WriteLine("Got exception: " + e.Message);
}
}
public void Attach(_DTE app)
{
applicationObject = app;
EnvDTE.Events events = applicationObject.Events;
OutputWindow outputWindow = (OutputWindow)applicationObject.Windows.Item(Constants.vsWindowKindOutput).Object;
//IObjectExplorerService objectExplorer = ServiceCache.GetObjectExplorer();
//var provider = (IObjectExplorerEventProvider)objectExplorer.GetService(typeof(IObjectExplorerEventProvider));
//provider.SelectionChanged += new NodesChangedEventHandler(provider_SelectionChanged);
_outputWindowPane = outputWindow.OutputWindowPanes.Add("DTE Event Information - C# Event Watcher");
//Retrieve the event objects from the automation model
_windowsEvents = (EnvDTE.WindowEvents)events.get_WindowEvents(null);
_textEditorEvents = (EnvDTE.TextEditorEvents)events.get_TextEditorEvents(null);
_taskListEvents = (EnvDTE.TaskListEvents)events.get_TaskListEvents("");
_solutionEvents = (EnvDTE.SolutionEvents)events.SolutionEvents;
_selectionEvents = (EnvDTE.SelectionEvents)events.SelectionEvents;
_outputWindowEvents = (EnvDTE.OutputWindowEvents)events.get_OutputWindowEvents("");
_findEvents = (EnvDTE.FindEvents)events.FindEvents;
_dteEvents = (EnvDTE.DTEEvents)events.DTEEvents;
_documentEvents = (EnvDTE.DocumentEvents)events.get_DocumentEvents(null);
_debuggerEvents = (EnvDTE.DebuggerEvents)events.DebuggerEvents;
_commandEvents = (EnvDTE.CommandEvents)events.get_CommandEvents("{00000000-0000-0000-0000-000000000000}", 0);
_buildEvents = (EnvDTE.BuildEvents)events.BuildEvents;
_miscFilesEvents = (EnvDTE.ProjectItemsEvents)events.MiscFilesEvents;
_solutionItemsEvents = (EnvDTE.ProjectItemsEvents)events.SolutionItemsEvents;
_globalProjectItemsEvents = ((EnvDTE80.Events2)events).ProjectItemsEvents;
_globalProjectsEvents = ((EnvDTE80.Events2)events).ProjectsEvents;
_textDocumentKeyPressEvents = ((EnvDTE80.Events2)events).get_TextDocumentKeyPressEvents(null);
_codeModelEvents = ((EnvDTE80.Events2)events).get_CodeModelEvents(null);
_windowVisibilityEvents = ((EnvDTE80.Events2)events).get_WindowVisibilityEvents(null);
_debuggerProcessEvents = ((EnvDTE80.Events2)events).DebuggerProcessEvents;
_debuggerExpressionEvaluationEvents = ((EnvDTE80.Events2)events).DebuggerExpressionEvaluationEvents;
_publishEvents = ((EnvDTE80.Events2)events).PublishEvents;
//Connect to each delegate exposed from each object retrieved above
_windowsEvents.WindowActivated += new _dispWindowEvents_WindowActivatedEventHandler(this.WindowActivated);
_windowsEvents.WindowClosing += new _dispWindowEvents_WindowClosingEventHandler(this.WindowClosing);
_windowsEvents.WindowCreated += new _dispWindowEvents_WindowCreatedEventHandler(this.WindowCreated);
_windowsEvents.WindowMoved += new _dispWindowEvents_WindowMovedEventHandler(this.WindowMoved);
_textEditorEvents.LineChanged += new _dispTextEditorEvents_LineChangedEventHandler(this.LineChanged);
_taskListEvents.TaskAdded += new _dispTaskListEvents_TaskAddedEventHandler(this.TaskAdded);
_taskListEvents.TaskModified += new _dispTaskListEvents_TaskModifiedEventHandler(this.TaskModified);
_taskListEvents.TaskNavigated += new _dispTaskListEvents_TaskNavigatedEventHandler(this.TaskNavigated);
_taskListEvents.TaskRemoved += new _dispTaskListEvents_TaskRemovedEventHandler(this.TaskRemoved);
_solutionEvents.AfterClosing += new _dispSolutionEvents_AfterClosingEventHandler(this.AfterClosing);
_solutionEvents.BeforeClosing += new _dispSolutionEvents_BeforeClosingEventHandler(this.BeforeClosing);
_solutionEvents.Opened += new _dispSolutionEvents_OpenedEventHandler(this.Opened);
_solutionEvents.ProjectAdded += new _dispSolutionEvents_ProjectAddedEventHandler(this.ProjectAdded);
_solutionEvents.ProjectRemoved += new _dispSolutionEvents_ProjectRemovedEventHandler(this.ProjectRemoved);
_solutionEvents.ProjectRenamed += new _dispSolutionEvents_ProjectRenamedEventHandler(this.ProjectRenamed);
_solutionEvents.QueryCloseSolution += new _dispSolutionEvents_QueryCloseSolutionEventHandler(this.QueryCloseSolution);
_solutionEvents.Renamed += new _dispSolutionEvents_RenamedEventHandler(this.Renamed);
_selectionEvents.OnChange += new _dispSelectionEvents_OnChangeEventHandler(this.OnChange);
_outputWindowEvents.PaneAdded += new _dispOutputWindowEvents_PaneAddedEventHandler(this.PaneAdded);
_outputWindowEvents.PaneClearing += new _dispOutputWindowEvents_PaneClearingEventHandler(this.PaneClearing);
_outputWindowEvents.PaneUpdated += new _dispOutputWindowEvents_PaneUpdatedEventHandler(this.PaneUpdated);
_findEvents.FindDone += new _dispFindEvents_FindDoneEventHandler(this.FindDone);
_dteEvents.ModeChanged += new _dispDTEEvents_ModeChangedEventHandler(this.ModeChanged);
_dteEvents.OnBeginShutdown += new _dispDTEEvents_OnBeginShutdownEventHandler(this.OnBeginShutdown);
_dteEvents.OnMacrosRuntimeReset += new _dispDTEEvents_OnMacrosRuntimeResetEventHandler(this.OnMacrosRuntimeReset);
_dteEvents.OnStartupComplete += new _dispDTEEvents_OnStartupCompleteEventHandler(this.OnStartupComplete);
_documentEvents.DocumentClosing += new _dispDocumentEvents_DocumentClosingEventHandler(this.DocumentClosing);
_documentEvents.DocumentOpened += new _dispDocumentEvents_DocumentOpenedEventHandler(this.DocumentOpened);
_documentEvents.DocumentOpening += new _dispDocumentEvents_DocumentOpeningEventHandler(this.DocumentOpening);
_documentEvents.DocumentSaved += new _dispDocumentEvents_DocumentSavedEventHandler(this.DocumentSaved);
_debuggerEvents.OnContextChanged += new _dispDebuggerEvents_OnContextChangedEventHandler(this.OnContextChanged);
_debuggerEvents.OnEnterBreakMode += new _dispDebuggerEvents_OnEnterBreakModeEventHandler(this.OnEnterBreakMode);
_debuggerEvents.OnEnterDesignMode += new _dispDebuggerEvents_OnEnterDesignModeEventHandler(this.OnEnterDesignMode);
_debuggerEvents.OnEnterRunMode += new _dispDebuggerEvents_OnEnterRunModeEventHandler(this.OnEnterRunMode);
_debuggerEvents.OnExceptionNotHandled += new _dispDebuggerEvents_OnExceptionNotHandledEventHandler(this.OnExceptionNotHandled);
_debuggerEvents.OnExceptionThrown += new _dispDebuggerEvents_OnExceptionThrownEventHandler(this.OnExceptionThrown);
_commandEvents.AfterExecute += new _dispCommandEvents_AfterExecuteEventHandler(this.AfterExecute);
_commandEvents.BeforeExecute += new _dispCommandEvents_BeforeExecuteEventHandler(this.BeforeExecute);
_buildEvents.OnBuildBegin += new _dispBuildEvents_OnBuildBeginEventHandler(this.OnBuildBegin);
_buildEvents.OnBuildDone += new _dispBuildEvents_OnBuildDoneEventHandler(this.OnBuildDone);
_buildEvents.OnBuildProjConfigBegin += new _dispBuildEvents_OnBuildProjConfigBeginEventHandler(this.OnBuildProjConfigBegin);
_buildEvents.OnBuildProjConfigDone += new _dispBuildEvents_OnBuildProjConfigDoneEventHandler(this.OnBuildProjConfigDone);
_miscFilesEvents.ItemAdded += new _dispProjectItemsEvents_ItemAddedEventHandler(this.MiscFilesEvents_ItemAdded);
_miscFilesEvents.ItemRemoved += new _dispProjectItemsEvents_ItemRemovedEventHandler(this.MiscFilesEvents_ItemRemoved);
_miscFilesEvents.ItemRenamed += new _dispProjectItemsEvents_ItemRenamedEventHandler(this.MiscFilesEvents_ItemRenamed);
_solutionItemsEvents.ItemAdded += new _dispProjectItemsEvents_ItemAddedEventHandler(this.SolutionItemsEvents_ItemAdded);
_solutionItemsEvents.ItemRemoved += new _dispProjectItemsEvents_ItemRemovedEventHandler(this.SolutionItemsEvents_ItemRemoved);
_solutionItemsEvents.ItemRenamed += new _dispProjectItemsEvents_ItemRenamedEventHandler(this.SolutionItemsEvents_ItemRenamed);
_globalProjectItemsEvents.ItemAdded += new _dispProjectItemsEvents_ItemAddedEventHandler(GlobalProjectItemsEvents_ItemAdded);
_globalProjectItemsEvents.ItemRemoved += new _dispProjectItemsEvents_ItemRemovedEventHandler(GlobalProjectItemsEvents_ItemRemoved);
_globalProjectItemsEvents.ItemRenamed += new _dispProjectItemsEvents_ItemRenamedEventHandler(GlobalProjectItemsEvents_ItemRenamed);
_globalProjectsEvents.ItemAdded += new _dispProjectsEvents_ItemAddedEventHandler(GlobalProjectsEvents_ItemAdded);
_globalProjectsEvents.ItemRemoved += new _dispProjectsEvents_ItemRemovedEventHandler(GlobalProjectsEvents_ItemRemoved);
_globalProjectsEvents.ItemRenamed += new _dispProjectsEvents_ItemRenamedEventHandler(GlobalProjectsEvents_ItemRenamed);
_textDocumentKeyPressEvents.AfterKeyPress += new _dispTextDocumentKeyPressEvents_AfterKeyPressEventHandler(AfterKeyPress);
_textDocumentKeyPressEvents.BeforeKeyPress += new _dispTextDocumentKeyPressEvents_BeforeKeyPressEventHandler(BeforeKeyPress);
_codeModelEvents.ElementAdded += new _dispCodeModelEvents_ElementAddedEventHandler(ElementAdded);
_codeModelEvents.ElementChanged += new _dispCodeModelEvents_ElementChangedEventHandler(ElementChanged);
_codeModelEvents.ElementDeleted += new _dispCodeModelEvents_ElementDeletedEventHandler(ElementDeleted);
_windowVisibilityEvents.WindowHiding += new _dispWindowVisibilityEvents_WindowHidingEventHandler(WindowHiding);
_windowVisibilityEvents.WindowShowing += new _dispWindowVisibilityEvents_WindowShowingEventHandler(WindowShowing);
_debuggerExpressionEvaluationEvents.OnExpressionEvaluation += new _dispDebuggerExpressionEvaluationEvents_OnExpressionEvaluationEventHandler(OnExpressionEvaluation);
_debuggerProcessEvents.OnProcessStateChanged += new _dispDebuggerProcessEvents_OnProcessStateChangedEventHandler(OnProcessStateChanged);
_publishEvents.OnPublishBegin += new _dispPublishEvents_OnPublishBeginEventHandler(OnPublishBegin);
_publishEvents.OnPublishDone += new _dispPublishEvents_OnPublishDoneEventHandler(OnPublishDone);
}
/// <summary>
/// Implements the OnConnection method of the IDTExtensibility2 interface.
/// Receives notification that the Add-in is being loaded.
/// </summary>
/// <param term='application'>
/// Root object of the host application.
/// </param>
/// <param term='connectMode'>
/// Describes how the Add-in is being loaded.
/// </param>
/// <param term='addInInst'>
/// Object representing this Add-in.
/// </param>
/// <seealso class='IDTExtensibility2' />
public void OnConnection(object application, Extensibility.ext_ConnectMode connectMode, object addInInst, ref System.Array custom)
{
Mfconsulting.Vsprj2make.RegistryHelper regHlpr = new RegistryHelper();
string [] monoVersions = null;
try
{
monoVersions = regHlpr.GetMonoVersions();
}
catch (Exception exc)
{
// Mono may not be installed
MessageBox.Show(exc.Message, "Prj2make Error",
MessageBoxButtons.OK, MessageBoxIcon.Error);
return; // Pull the cord and discontinue loading the add-in
}
applicationObject = (_DTE)application;
addInInstance = (AddIn)addInInst;
int selectedIndexForComboBox = 1;
EnvDTE.Events events = applicationObject.Events;
OutputWindow outputWindow = (OutputWindow)applicationObject.Windows.Item(Constants.vsWindowKindOutput).Object;
outputWindowPane = outputWindow.OutputWindowPanes.Add("Prj2Make Messages");
object [] contextGUIDS = new object[] { };
Commands commands = applicationObject.Commands;
_CommandBars commandBars = applicationObject.CommandBars;
CommandBar cmdBarMonoBarra;
CommandBar commandBar = (CommandBar)commandBars["Tools"];
CommandBarPopup popMenu; // Prj2Make popupmenu
CommandBarPopup popMenu2; // Explorer Current Project
// Creates a more legible representation of the
// command bar control collection contained in
// the Tools command bar
CommandBarControls commandBarControls;
commandBarControls = commandBar.Controls;
// Create Makefile
Command command1 = null;
// Generate MonoDevelop files
Command command2 = null;
// Import MonoDevelop Solutions
Command command3 = null;
// Run on Mono
Command command5 = null;
// vsprj2make Options
Command command6 = null;
// Generate a distribution unit
Command command7 = null;
// Explore current solution
Command command8 = null;
// Explore current Project
Command command9 = null;
// ------------- Add Pop-up menu ----------------
popMenu2 = (CommandBarPopup)commandBarControls.Add(
MsoControlType.msoControlPopup,
System.Reflection.Missing.Value, // Object ID
System.Reflection.Missing.Value, // Object parameters
1, // Object before
true);
popMenu2.Caption = "&Windows Explore";
// ------------- Add Pop-up menu ----------------
popMenu = (CommandBarPopup)commandBarControls.Add(
MsoControlType.msoControlPopup,
System.Reflection.Missing.Value, // Object ID
System.Reflection.Missing.Value, // Object parameters
1, // Object before
true);
popMenu.Caption = "Prj&2Make";
// Add the create makefile command -- command1
command1 = CreateNamedCommand(
addInInstance,
commands,
"CreateMake",
"Create &Makefile",
"Generate Makefile",
ref contextGUIDS
);
if (command1 == null)
{
command1 = GetExistingNamedCommand(commands, "vsprj2make.Connect.CreateMake");
}
try
{
command1.AddControl(popMenu.CommandBar, 1);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Add the generate a dist unit command -- command7
command7 = CreateNamedCommand(
addInInstance,
commands,
"GenDistUnit",
"Generate Distribution &Unit",
"Generates a distribution unit (zip file)",
ref contextGUIDS
);
if (command7 == null)
{
command7 = GetExistingNamedCommand(commands, "vsprj2make.Connect.GenDistUnit");
}
try
{
command7.AddControl(popMenu.CommandBar, 2);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Add the GenMDFiles command -- command2
command2 = CreateNamedCommand(
addInInstance,
commands,
"GenMDFiles",
"Create Mono&Develop Solution",
"Generate MonoDevelop Solution",
ref contextGUIDS
);
if (command2 == null)
{
command2 = GetExistingNamedCommand(commands, "vsprj2make.Connect.GenMDFiles");
}
try
{
command2.AddControl(popMenu.CommandBar, 3);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Add the PrjxToCsproj command -- command3
command3 = CreateNamedCommand(
addInInstance,
commands,
"PrjxToCsproj",
"&Import MonoDevelop Solution...",
"Imports a MonoDevelop Solution",
ref contextGUIDS
);
if (command3 == null)
{
command3 = GetExistingNamedCommand(commands, "vsprj2make.Connect.PrjxToCsproj");
}
try
{
command3.AddControl(popMenu.CommandBar, 4);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Add the Ron on Mono command -- command5
command5 = CreateNamedCommand(
addInInstance,
commands,
"RunOnMono",
"&Run on Mono",
"Run solution on mono",
ref contextGUIDS
);
if (command5 == null)
{
command5 = GetExistingNamedCommand(commands, "vsprj2make.Connect.RunOnMono");
}
try
{
command5.AddControl(popMenu.CommandBar, 5);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Add the Options command -- command6
command6 = CreateNamedCommand(
addInInstance,
commands,
"Options",
"&Options...",
"Options for prj2make Add-in",
ref contextGUIDS
);
if (command6 == null)
{
command6 = GetExistingNamedCommand(commands, "vsprj2make.Connect.Options");
}
try
{
command6.AddControl(popMenu.CommandBar, 6);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Add the ExploreCurrSln command -- command8
command8 = CreateNamedCommand(
addInInstance,
commands,
"ExploreCurrSln",
"Current &Solution",
"Explore the current solution",
ref contextGUIDS
);
if (command8 == null)
{
command8 = GetExistingNamedCommand(commands, "vsprj2make.Connect.ExploreCurrSln");
}
try
{
command8.AddControl(popMenu2.CommandBar, 1);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Add the ExploreCurrDoc command -- command9
command9 = CreateNamedCommand(
addInInstance,
commands,
"ExploreCurrDoc",
"Current &Document",
"Explore the current Document",
ref contextGUIDS
);
if (command9 == null)
{
command9 = GetExistingNamedCommand(commands, "vsprj2make.Connect.ExploreCurrDoc");
}
try
{
command9.AddControl(popMenu2.CommandBar, 2);
}
catch (System.Exception exc)
{
Trace.WriteLine(String.Format("Error during OnConnect of Add-in:\n {0}", exc.Message));
}
// Mono Toolbar
CommandBar cmdBarBuild = (CommandBar)commandBars["Build"];
try
{
cmdBarMonoBarra = (CommandBar)commandBars["MonoBarra"];
}
catch (Exception)
{
commands.AddCommandBar("MonoBarra",
vsCommandBarType.vsCommandBarTypeToolbar,
cmdBarBuild,
1
);
cmdBarMonoBarra = (CommandBar)commandBars["MonoBarra"];
cmdBarMonoBarra.Visible = true;
}
if (testInMonoCommandBarButton == null)
{
// Create the Ron on Mono Button
testInMonoCommandBarButton = (CommandBarButton)cmdBarMonoBarra.Controls.Add(
Microsoft.Office.Core.MsoControlType.msoControlButton,
System.Reflection.Missing.Value,
System.Reflection.Missing.Value,
1,
false
);
testInMonoCommandBarButton.Caption = "Run on &Mono";
testInMonoCommandBarButton.DescriptionText = "Run solution with the mono runtime";
testInMonoCommandBarButton.TooltipText = "Run on mono";
testInMonoCommandBarButton.ShortcutText = "Run on &Mono";
testInMonoCommandBarButton.Style = MsoButtonStyle.msoButtonCaption;
testInMonoCommandBarButton.Click += new _CommandBarButtonEvents_ClickEventHandler(testInMonoCommandBarButton_Click);
}
if (versionComboBox == null)
{
// Create the combobox
versionComboBox = (CommandBarComboBox)cmdBarMonoBarra.Controls.Add(
Microsoft.Office.Core.MsoControlType.msoControlDropdown,
System.Reflection.Missing.Value,
System.Reflection.Missing.Value,
2,
false
);
for (int i = 0; i < monoVersions.Length; i++)
{
versionComboBox.AddItem(monoVersions[i], i + 1);
if (monoVersions[i].CompareTo(regHlpr.GetDefaultClr()) == 0)
{
selectedIndexForComboBox = i + 1;
}
}
versionComboBox.Change += new _CommandBarComboBoxEvents_ChangeEventHandler(versionComboBox_Change);
// Select the active index based on
// the current mono version
versionComboBox.ListIndex = selectedIndexForComboBox;
}
}
