Beispiel #1
0
        public SAGEScan(ref double[] scan_massSA, ref double[] scan_mass, ref string versionPribor, ref SerialPort newPort, ref int countscan)
        {
            int   countSA;
            Regex regex1;
            bool  message1 = true;

            if (versionPribor.Contains("2"))
            {
                countSA = 8;
            }
            else
            {
                countSA = 4;
            }

            LogoForm logoform          = new LogoForm();
            string   GE5_1             = "";
            string   indata            = newPort.ReadExisting();
            int      indata_zero       = 0;
            string   indata_0          = "";
            bool     indata_bool       = true;
            int      GEbyteRecieved4_1 = newPort.ReadBufferSize;

            byte[] GEbuffer4_1 = new byte[GEbyteRecieved4_1];
            Regex  regex       = new Regex(@"\W");

            newPort.Write("SA " + countSA + "\r");

            indata      = newPort.ReadExisting();
            indata_zero = 0;
            indata_0    = "";
            indata_bool = true;
            while (indata_bool == true)
            {
                if (indata.Contains(">"))
                {
                    indata_bool = false;
                }

                else
                {
                    indata = newPort.ReadExisting();
                }
            }

            newPort.Write("GE 1\r");

            indata_0 = "";
            for (int i = 0; i <= 5000000; i++)
            {
                indata = newPort.ReadExisting();
                if (indata_0.Contains("\r>"))
                {
                    break;
                }
                indata_0 += indata;
            }
            indata_zero = 0;

            indata_bool = true;

            regex  = new Regex(@"\W");
            regex1 = new Regex(@"\D");
            GE5_1  = regex.Replace(indata_0, "");
            GE5_1  = regex1.Replace(GE5_1, "");

            string GE5_1_0 = regex.Replace(indata_0, "");

            GE5_1_0 = regex1.Replace(GE5_1, "");

            double GAText1 = (Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1_0)) * 100;

            double OptPlot = Math.Log10(Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1));

            double OptPlot1 = OptPlot - Math.Truncate(OptPlot);

            while (Convert.ToInt32(GE5_1) > 10000 && countSA > 1)
            {
                countSA--;
                newPort.Write("SA " + countSA + "\r");
                int SAAnalisByteRecieved1_1_1 = newPort.ReadBufferSize;
                // Thread.Sleep(100);
                indata      = newPort.ReadExisting();
                indata_zero = 0;
                indata_0    = "";
                indata_bool = true;
                while (indata_bool == true)
                {
                    if (indata.Contains(">"))
                    {
                        indata_bool = false;
                    }

                    else
                    {
                        indata = newPort.ReadExisting();
                    }
                }

                newPort.Write("GE 1\r");

                indata_0 = "";
                for (int i = 0; i <= 5000000; i++)
                {
                    indata = newPort.ReadExisting();
                    if (indata_0.Contains("\r>"))
                    {
                        break;
                    }
                    indata_0 += indata;
                }
                indata_zero = 0;

                indata_bool = true;


                regex  = new Regex(@"\W");
                regex1 = new Regex(@"\D");
                GE5_1  = regex.Replace(indata_0, "");
                GE5_1  = regex1.Replace(GE5_1, "");

                GE5_1_0 = regex.Replace(indata_0, "");
                GE5_1_0 = regex1.Replace(GE5_1, "");



                GAText1 = (Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1_0)) * 100;



                OptPlot = Math.Log10(Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1));

                OptPlot1 = OptPlot - Math.Truncate(OptPlot);
            }
            Application.OpenForms["LogoForm"].Close();
            //  listBox1.Items.Add(GE5_1_0);
            scan_mass[countscan]   = Convert.ToDouble(GE5_1_0);
            scan_massSA[countscan] = Convert.ToDouble(countSA);
        }
Beispiel #2
0
        public Calibrovka(Ecoview parent)
        {
            this._Analis = parent;

            _Analis.button1.Enabled = false;
            try
            {
                _Analis.label59.Visible = false;
                switch (_Analis.selet_rezim)
                {
                case 5:
                    /* _Analis.StopSpectr = false;
                     * _Analis.countscan = 0;
                     * _Analis.scan_massSA = new double[ScanTable.Rows.Count - 1];
                     * _Analis.scan_mass = new double[ScanTable.Rows.Count - 1];
                     * Application.DoEvents();
                     * LogoForm();
                     * while ((_Analis.countscan != _Analis.ScanTable.Rows.Count - 1) && (_Analis.StopSpectr != true))
                     * {
                     *
                     *   Application.DoEvents();
                     *   _Analis.label33.Visible = true;
                     *   _Analis.Podskazka.Text = "Можно остановить";
                     *   Application.DoEvents();
                     *   _Analis.GWNew.Text = string.Format("{0:0.0}", _Analis.ScanTable.Rows[_Analis.countscan].Cells[0].Value.ToString());
                     *   SW_Scan();
                     *   Thread.Sleep(50);
                     *   SAGEScan(ref countSA, ref GE5_1_0);
                     *   Application.DoEvents();
                     *
                     *
                     *   _Analis.countscan++;
                     * }
                     * Application.OpenForms["LogoFrm"].Close();
                     * MessageBox.Show("Калибровка закончена!");
                     * _Analis.Podskazka.Text = "Можно сканировать";
                     * _Analis.label59.Visible = false;
                     * _Analis.label28.Visible = true;
                     * _Analis.label25.Visible = false;
                     * _Analis.label26.Visible = false;
                     * _Analis.label33.Visible = false;*/
                    break;

                case 3:
                    _Analis.StopSpectr  = false;
                    _Analis.countscan   = 0;
                    _Analis.scan_massSA = new double[_Analis.dataGridView5.Columns.Count - 2];
                    _Analis.scan_mass   = new double[_Analis.dataGridView5.Columns.Count - 2];
                    Application.DoEvents();
                    LogoForm logoform = new LogoForm();
                    while ((_Analis.countscan != _Analis.dataGridView5.Columns.Count - 2) && (_Analis.StopSpectr != true))
                    {
                        _Analis.label33.Visible = true;
                        _Analis.Podskazka.Text  = "Можно остановить";
                        Application.DoEvents();
                        _Analis.SW_MultiScan();
                        Application.DoEvents();
                        _Analis.GWNew.Text       = string.Format("{0:0.0}", _Analis.textBoxCO[_Analis.countscan].Text);
                        _Analis.button12.Enabled = false;
                        _Analis.button14.Enabled = false;
                        _Analis.button11.Enabled = true;
                        SAGEScan sageScan = new SAGEScan(ref _Analis.scan_massSA, ref _Analis.scan_mass, ref _Analis.versionPribor, ref _Analis.newPort, ref _Analis.countscan);
                        Application.DoEvents();
                        _Analis.countscan++;
                    }
                    Application.OpenForms["LogoForm"].Close();
                    _Analis.button12.Enabled = true;
                    _Analis.button14.Enabled = true;
                    _Analis.button11.Enabled = false;
                    MessageBox.Show("Калибровка закончена!");
                    _Analis.label59.Visible = false;
                    _Analis.label28.Visible = true;
                    _Analis.label25.Visible = false;
                    _Analis.label26.Visible = false;
                    _Analis.Podskazka.Text  = "Можно сканировать";
                    _Analis.label33.Visible = false;
                    break;

                default:
                    SAGE sage = new SAGE(ref _Analis.countSA, ref _Analis.GE5_1_0, ref _Analis.versionPribor, ref _Analis.newPort);
                    MessageBox.Show("Калибровка закончена!");
                    _Analis.label59.Visible = false;
                    _Analis.label28.Visible = true;
                    _Analis.label25.Visible = false;
                    _Analis.label26.Visible = false;
                    _Analis.label27.Visible = false;
                    _Analis.label33.Visible = false;
                    _Analis.Podskazka.Text  = "Можно сканировать";
                    break;
                }
                _Analis.button3.Enabled = true;
                _Analis.Podskazka.Text  = "Можно сканировать";
                _Analis.button1.Enabled = true;
            }
            catch
            {
            }
        }
Beispiel #3
0
        public SAGE(ref int countSA, ref string GE5_1_0, ref string versionPribor, ref SerialPort newPort)
        {
            if (versionPribor.Contains("2"))
            {
                countSA = 8;
            }
            else
            {
                countSA = 4;
            }

            LogoForm logoform = new LogoForm();

            newPort.Write("SA " + countSA + "\r");

            string indata = newPort.ReadExisting();

            string indata_0;
            bool   indata_bool = true;

            while (indata_bool == true)
            {
                if (indata.Contains(">"))
                {
                    indata_bool = false;
                }

                else
                {
                    indata = newPort.ReadExisting();
                }
            }

            newPort.Write("GE 1\r");

            indata_0 = "";
            for (int i = 0; i <= 5000000; i++)
            {
                indata = newPort.ReadExisting();
                if (indata_0.Contains("\r>"))
                {
                    break;
                }
                indata_0 += indata;
            }
            int indata_zero = 0;

            indata_bool = true;

            string GE5_1  = "";
            Regex  regex  = new Regex(@"\W");
            Regex  regex1 = new Regex(@"\D");

            GE5_1 = regex.Replace(indata_0, "");
            GE5_1 = regex1.Replace(GE5_1, "");

            GE5_1_0 = regex.Replace(indata_0, "");
            GE5_1_0 = regex1.Replace(GE5_1, "");
            //GEText.Text = GE5_1_0;
            //if(GE5_1 == "")
            {
                double GAText1 = (Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1_0)) * 100;

                // GAText.Text = string.Format("{0:0.00}", GAText1);

                double OptPlot = Math.Log10(Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1));

                double OptPlot1 = OptPlot - Math.Truncate(OptPlot);
                //  OptichPlot.Text = string.Format("{0:0.0000}", OptPlot1);
                while (Convert.ToInt32(GE5_1) > 10000 && countSA > 1)
                {
                    countSA--;
                    newPort.Write("SA " + countSA + "\r");
                    int SAAnalisByteRecieved1_1_1 = newPort.ReadBufferSize;
                    // Thread.Sleep(100);
                    indata      = newPort.ReadExisting();
                    indata_zero = 0;
                    indata_0    = "";
                    indata_bool = true;
                    while (indata_bool == true)
                    {
                        if (indata.Contains(">"))
                        {
                            indata_bool = false;
                        }

                        else
                        {
                            indata = newPort.ReadExisting();
                        }
                    }

                    newPort.Write("GE 1\r");

                    indata_0 = "";
                    for (int i = 0; i <= 5000000; i++)
                    {
                        indata = newPort.ReadExisting();
                        if (indata_0.Contains("\r>"))
                        {
                            break;
                        }
                        indata_0 += indata;
                    }
                    indata_zero = 0;
                    indata_bool = true;

                    regex  = new Regex(@"\W");
                    regex1 = new Regex(@"\D");
                    GE5_1  = regex.Replace(indata_0, "");
                    GE5_1  = regex1.Replace(GE5_1, "");

                    GE5_1_0 = regex.Replace(indata_0, "");
                    GE5_1_0 = regex1.Replace(GE5_1, "");
                    //GEText.Text = GE5_1_0;
                    //   if (GE5_1 == "")
                    {
                        GAText1 = (Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1_0)) * 100;


                        //    GAText.Text = string.Format("{0:0.00}", GAText1);

                        OptPlot = Math.Log10(Convert.ToDouble(GE5_1_0) / Convert.ToDouble(GE5_1));

                        OptPlot1 = OptPlot - Math.Truncate(OptPlot);
                        //   OptichPlot.Text = string.Format("{0:0.0000}", OptPlot1);
                    }
                }
            }

            SWF.Application.OpenForms["LogoForm"].Close();
        }