private void handleData(ReadingsUpdateEventArgs e)
{
updateStatus();
int index1 = cmbHallProbe1.SelectedIndex;
int index2 = cmbHallProbe2.SelectedIndex;
if (index1 >= 0 && index2 >= 0)
{
double val1 = e.readings[index1, 1];
if (Double.IsInfinity(val1) || Double.IsNaN(val1))
{
val1 = 0;
}
double val2 = e.readings[index2, 1];
if (Double.IsInfinity(val2) || Double.IsNaN(val2))
{
val2 = 0;
}
try
{
nudHallProbe1.Value = (decimal)val1;
nudHallProbe2.Value = (decimal)val2;
}
catch (Exception ex)
{
}
}
if (calibrationOngoing)
{
if (calibrationCnt >= calibration.GetLength(0))
{
calibrationOngoing = false;
//done with the calibration. Save to disk. Work-around since XMLserializer does not support serializing multi-dimensional arrays
double[] calibX = new double[calibration.GetLength(0)];
double[] calibY = new double[calibration.GetLength(0)];
for (int i = 0; i < calibX.Length; i++)
{
calibX[i] = calibration[i, 0];
calibY[i] = calibration[i, 1];
}
SerializeData.SerializeObject <double[]>(calibX, calibrationFile + "_xvals.xml");
SerializeData.SerializeObject <double[]>(calibY, calibrationFile + "_yvals.xml");
}
else
{
//position on the y-axis
calibration[calibrationCnt, 1] = (double)nudCurrentPos.Value;
double HP1 = (double)nudHallProbe1.Value;
double HP2 = (double)nudHallProbe2.Value;
//field value on the x-axis
calibration[calibrationCnt, 0] = Math.Sqrt(HP1 * HP1 + HP2 * HP2);
nudSetPos.Value = (decimal)(calibration[calibrationCnt, 1] + dtheta_calibration);
moveMagnet();
calibrationCnt++;
Thread.Sleep(500);
}
}
}
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
int index = cmbSeries.SelectedIndex;
currentStabilityValue = e.readings[index, 1];
lblStability.Text = currentStabilityValue.ToString("e3");
}
private void updateExperiment(ReadingsUpdateEventArgs e)
{
if (experimentReadingsUpdate != null)
{
experimentReadingsUpdate(this, e);
}
}
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
if (experimentReadingsUpdate != null)
{
experimentReadingsUpdate(sender, e);
}
}
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
if (dataSaver != null)
{
dataSaver.writeLine(e.readings);
}
}
/**
* Event that may be raised by a dynamic temperature gauge (such as the probe). When the probe is not touching, the gauge should be disabled to avoid severe over heating
* */
/* public void temperatureGaugeStateChanged(Object sender, TemperatureGaugeEventArgs e)
* {
* temperatureGaugeEnabled = e.temperatureGaugeEnabled;
* }
*/
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
//when getting some data update the PV, the error and thus the output
if (chkEnabled.Checked && temperatureGaugeEnabled)
{
int port = cmbKeithleyPort.SelectedIndex;
double time = e.readings[port, 0];
double Tprobe = e.readings[port, 1];
double output = getOutput(Tprobe, time);
//if a relay is attached this means the current should be reversed if the sign is negative
if (relay != null)
{
if (output > 0)
{
relay.updateState(false);
}
else
{
relay.updateState(true);
}
output = Math.Abs(output);
}
if (psuInterface != null)
{
int psuPort = cmbPSUPort.SelectedIndex;
psuInterface.setCurrent(psuPort, output);
psuInterface.setEnabled(psuPort, true);
}
}
else
{
if (psuInterface != null)
{
int psuPort = cmbPSUPort.SelectedIndex;
psuInterface.setEnabled(psuPort, false);
}
}
}
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
if (experimentRunning)
{
if (experimentReadingsUpdate != null)
{
experimentReadingsUpdate(sender, e);
}
if (currentExperiment < experimentList.Count)
{
if (experimentList[currentExperiment].updateExperimentFlow())
{
experimentList[currentExperiment] = null;
currentExperiment++;
}
}
}
}
private void saveData(double[,] dat)
{
int nExtra = additionalData.Count();
int n = dat.GetLength(0) + nExtra;
double[,] dat_out = new double[n, 2];
for (int i = 0; i < dat.GetLength(0); i++)
{
dat_out[i, 0] = dat[i, 0];
dat_out[i, 1] = dat[i, 1];
}
//pad the extra data
for (int i = dat.GetLength(0); i < n; i++)
{
dat_out[i, 1] = additionalData[i - dat.GetLength(0)];
}
//remember to clear the additional data list
additionalData.Clear();
int selExp = k2700Setup.getSelectedExperimentMode();
if (dataWriter != null && dataWriter[selExp] != null)
{
if (selExp >= 0 && selExp < dataWriter.Length)
{
dataWriter[selExp].writeLine(dat_out);
txtFilename.Text = dataWriter[selExp].getFilenameData();
}
}
if (ReadingsUpdate != null)
{
ReadingsUpdateEventArgs e = new ReadingsUpdateEventArgs();
e.readings = dat;
e.measurementTypes = getMeasurementTypes();
e.names = getMeasurementNames();
e.chanEnabled = getMeasurementChanEnabled();
ReadingsUpdate(this, e);
}
}
private void picoInstrument_SaveData(object sender, InstrumentDatasetEventArgs e)
{
double[,] dat = e.dataSet.getLatestData();
object[] args = new object[2];
args[0] = datGrdPico;
args[1] = dat;
if (ReadingsUpdate != null)
{
ReadingsUpdateEventArgs ex = new ReadingsUpdateEventArgs();
ex.readings = dat;
//e.measurementTypes = getMeasurementTypes();
//e.names = getMeasurementNames();
//e.chanEnabled = getMeasurementChanEnabled();
ReadingsUpdate(this, ex);
}
BeginInvoke(new UpdateDataGridAsync(updateDataGridView), args);
}
/**
* Listener for updates from the Keithley readings
*/
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
/*
* //extract the data from the load cell port
* //should be changed so the keithleyControl can provide the correct
* //port info, but is hardly a big issue at the moment.
* int port = cmbLoadPort.SelectedIndex;
* double load = e.readings[port, 1];
*
*
* double excitation = e.readings[cmbSelectLoadCellExcitation.SelectedIndex, 1];
*
* doubleCurrentLoad = LCEB_LoadCell.getLoadNewton(load, excitation);
* doubleCurrentLoad = doubleCurrentLoad - loadOffset;
* txtCurrentLoad.Text = doubleCurrentLoad.ToString();
*
* updateProbeContact();
*
* // Initiate the probe scanning routine if flagged by isScanning
* scanningRoutine();
*/
}
internal void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
//check all temperature readings if they are above the accepted limit
for (int i = 0; i < e.chanEnabled.Length; i++)
{
switch (e.measurementTypes[i])
{
case Keithley2700MeasurementTypes.TC_E:
case Keithley2700MeasurementTypes.TC_K:
double val = e.readings[i, 1];
if (!Double.IsInfinity(val) && !Double.IsNaN(val) && val > temperatureLimit)
{
onCloseInstruments();
}
break;
default:
break;
}
}
}
private void saveData(double [,] rawData, double[] meanVals, double[] stdevVals)
{
if (plotValIndex >= plotValues.GetLength(0))
{
plotValIndex = 0;
}
for (int i = 0; i < plotValues.GetLength(1); i++)
{
plotValues[plotValIndex, i] = meanVals[i];
}
ReadingsUpdateEventArgs evt = new ReadingsUpdateEventArgs();
double[,] dat = new double[4, 2];
for (int i = 0; i < 4; i++)
{
dat[i, 0] = meanVals[5];
dat[i, 1] = meanVals[i];
}
evt.readings = dat;
graphXYPlot1.readingsUpdate(null, evt);
plotValIndex++;
nMeasurements++;
nudCurrentMeasurement.Value = (decimal)nMeasurements;
datasaverRaw.writeRaw(rawData);
datasaverProcessed.writeProcessed(meanVals, stdevVals);
if (nMeasurements >= (int)nudNMea.Value)
{
//fire the event that the no. of data points has been reached
if (measurementsCompleted != null)
{
measurementsCompleted(this, null);
}
}
}
/**
* Called when the data system pushes new data
* */
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
object[] dat = new object[1];
dat[0] = e;
BeginInvoke(new HandleData(handleData), dat);
}
/**
* Called when the Keithley or other data acquisition has new data
* */
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
object[] dat = new object[1];
dat[0] = e.readings;
BeginInvoke(new UpdateSeries(updateSeries), dat);
}
private void filterData(ReadingsUpdateEventArgs e)
{
double [,] data = e.readings;
//init the amended data set, i.e. the raw data concatenated with the results of the filtering
double[,] datOut = new double[data.GetLength(0) + nFilters, 2];
//copy the raw data
for (int i = 0; i < data.GetLength(0); i++)
{
datOut[i, 0] = data[i, 0];
datOut[i, 1] = data[i, 1];
}
//now do the filtering
EFMExperimentFilters[] filters = (EFMExperimentFilters[])settings.transformation.ToArray(typeof(int));
int[] chnA = (int[])settings.channelA.ToArray(typeof(int));
int[] chnB = (int[])settings.channelB.ToArray(typeof(int));
string[] names_arr = (string[])settings.names.ToArray(typeof(string));
double[] K1 = (double[])settings.K1_vals.ToArray(typeof(double));
double[] K2 = (double[])settings.K2_vals.ToArray(typeof(double));
double[] K3 = (double[])settings.K3_vals.ToArray(typeof(double));
for (int i = 0; i < nFilters; i++)
{
int index = i + data.GetLength(0);
switch (filters[i])
{
case EFMExperimentFilters.HallProbeSignal:
//transfer the time of the channel
datOut[index, 0] = data[chnA[i], 0];
//filter the data point
double scale = K1[i];
double offset = K2[i];
double nom_current = K3[i];
double voltage = data[chnA[i], 1];
double current = data[chnB[i], 1];
datOut[index, 1] = 1 / scale * (voltage * nom_current / current + offset);
break;
case EFMExperimentFilters.PeltierDifference:
//transfer the time
datOut[index, 0] = 0.5 * (data[chnA[i], 0] + data[chnB[i], 0]);
//Subtract the two peltier signals
datOut[index, 1] = data[chnA[i], 1] - data[chnB[i], 1];
break;
case EFMExperimentFilters.PeltierStability:
datOut[index, 0] = data[chnA[i], 0];
if (curStabilityPos >= stabilityDataBuffer.Length)
{
curStabilityPos = 0;
}
//use the peltier difference as the variable to check for stability
stabilityDataBuffer[curStabilityPos] = data[chnA[i], 1] - data[chnB[i], 1];
//increment the position counter
curStabilityPos++;
double mean = 0;
double std = 0;
if (curStabilityPos > 0)
{
for (int j = 0; j < stabilityDataBuffer.Length; j++)
{
mean += stabilityDataBuffer[j];
}
mean = mean / (stabilityDataBuffer.Length - 1);
for (int j = 0; j < stabilityDataBuffer.Length; j++)
{
std += Math.Pow((stabilityDataBuffer[j] - mean), 2);
}
std = Math.Sqrt(std / (curStabilityPos + 1));
//stability = Math.Abs(std / mean);
datOut[index, 1] = std;
}
break;
default:
break;
}
}
if (FilterReadingsUpdate != null)
{
e.readings = datOut;
FilterReadingsUpdate(this, e);
}
}
/**
* Data from the data collector
* */
public void readingsUpdate(object sender, ReadingsUpdateEventArgs e)
{
object[] dat = new object[1];
dat[0] = e;
BeginInvoke(new UpdateExperiment(updateExperiment), dat);
}