private static void AddBorderCollisionEdges(TileEdgeMap targetEdgeMap, Point2 edgeMapPos, Point2 totalSize)
{
int rightBorderPos = totalSize.X - edgeMapPos.X;
int bottomBorderPos = totalSize.Y - edgeMapPos.Y;
// Top border
if (edgeMapPos.Y == 0)
{
for (int x = 1; x < Math.Min(targetEdgeMap.Width, rightBorderPos + 1); x++)
{
targetEdgeMap.AddEdge(new Point2(x - 1, 0), new Point2(x, 0));
}
}
// Bottom border
if (bottomBorderPos < targetEdgeMap.Height)
{
for (int x = 1; x < Math.Min(targetEdgeMap.Width, rightBorderPos + 1); x++)
{
targetEdgeMap.AddEdge(new Point2(x - 1, bottomBorderPos), new Point2(x, bottomBorderPos));
}
}
// Left border
if (edgeMapPos.X == 0)
{
for (int y = 1; y < Math.Min(targetEdgeMap.Height, bottomBorderPos + 1); y++)
{
targetEdgeMap.AddEdge(new Point2(0, y - 1), new Point2(0, y));
}
}
// Right border
if (rightBorderPos < targetEdgeMap.Width)
{
for (int y = 1; y < Math.Min(targetEdgeMap.Height, bottomBorderPos + 1); y++)
{
targetEdgeMap.AddEdge(new Point2(rightBorderPos, y - 1), new Point2(rightBorderPos, y));
}
}
}
private static void GenerateCollisionShapes(TileEdgeMap edgeMap, Vector2 origin, Vector2 tileSize, bool roundedCorners, IList <ShapeInfo> shapeList)
{
// Traverse the edge map and gradually create chain / loop
// shapes until all edges have been used.
RawList <Point2> currentChain = new RawList <Point2>();
RawList <Vector2> vertexBuffer = new RawList <Vector2>();
while (true)
{
// Begin a new continuous chain of nodes
currentChain.Clear();
// Find a starting node for our current chain.
// If there is none, we found and handled all edges.
Point2 start = edgeMap.FindNonEmpty();
if (start == new Point2(-1, -1))
{
break;
}
// Traverse the current chain node-by-node from the start we found
Point2 current = start;
while (true)
{
// Add the current node to our continuous chain
currentChain.Add(current);
// Find the next node that connects to the current one.
// If there is none, our current chain is done.
Point2 next = edgeMap.GetClockwiseNextFrom(current);
if (next == new Point2(-1, -1))
{
break;
}
// Remove the edge we used to get to the next node
edgeMap.RemoveEdge(current, next);
// Use the next node as origin for traversing further
current = next;
}
// Generate a shape from the current chain
bool isLoop = (start == currentChain[currentChain.Count - 1]);
if (isLoop)
{
currentChain.RemoveAt(currentChain.Count - 1);
}
vertexBuffer.Clear();
// Rounded corners
if (roundedCorners && currentChain.Count >= 3)
{
vertexBuffer.Reserve(currentChain.Count * 2);
vertexBuffer.Count = 0;
for (int i = 0; i < currentChain.Count; i++)
{
int prevIndex = (i - 1 + currentChain.Count) % currentChain.Count;
int nextIndex = (i + 1) % currentChain.Count;
Vector2 currentVert = origin + tileSize * (Vector2)currentChain[i];
Vector2 prevVert = origin + tileSize * (Vector2)currentChain[prevIndex];
Vector2 nextVert = origin + tileSize * (Vector2)currentChain[nextIndex];
if (nextVert - currentVert != currentVert - prevVert)
{
if (!isLoop && (i == 0 || i == currentChain.Count - 1))
{
vertexBuffer.Add(currentVert);
}
else
{
vertexBuffer.Add(currentVert + (prevVert - currentVert).Normalized * tileSize * 0.2f);
vertexBuffer.Add(currentVert + (nextVert - currentVert).Normalized * tileSize * 0.2f);
}
}
}
}
// Sharp corners
else
{
vertexBuffer.Reserve(currentChain.Count);
vertexBuffer.Count = 0;
for (int i = 0; i < currentChain.Count; i++)
{
int prevIndex = (i - 1 + currentChain.Count) % currentChain.Count;
int nextIndex = (i + 1) % currentChain.Count;
Vector2 currentVert = origin + tileSize * (Vector2)currentChain[i];
Vector2 prevVert = origin + tileSize * (Vector2)currentChain[prevIndex];
Vector2 nextVert = origin + tileSize * (Vector2)currentChain[nextIndex];
if (nextVert - currentVert != currentVert - prevVert)
{
vertexBuffer.Add(currentVert);
}
}
}
Vector2[] vertices = new Vector2[vertexBuffer.Count];
vertexBuffer.CopyTo(vertices, 0);
shapeList.Add(isLoop ?
(ShapeInfo) new LoopShapeInfo(vertices) :
(ShapeInfo) new ChainShapeInfo(vertices));
}
}
private static void AddFenceCollisionEdges(Grid <TileCollisionShape> collisionData, TileEdgeMap targetEdgeMap)
{
// Populate the edge map with all the collision fences
for (int y = 0; y < SectorSize; y++)
{
for (int x = 0; x < SectorSize; x++)
{
TileCollisionShape collision = collisionData[x, y];
// Skip both free and completely solid tiles
if (collision == TileCollisionShape.Free)
{
continue;
}
if ((collision & TileCollisionShape.Solid) == TileCollisionShape.Solid)
{
continue;
}
// Add the various fence collision types
if ((collision & TileCollisionShape.Top) != TileCollisionShape.Free)
{
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x + 1, y));
}
if ((collision & TileCollisionShape.Bottom) != TileCollisionShape.Free)
{
targetEdgeMap.AddEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
}
if ((collision & TileCollisionShape.Left) != TileCollisionShape.Free)
{
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x, y + 1));
}
if ((collision & TileCollisionShape.Right) != TileCollisionShape.Free)
{
targetEdgeMap.AddEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
}
if ((collision & TileCollisionShape.DiagonalDown) != TileCollisionShape.Free)
{
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x + 1, y + 1));
}
if ((collision & TileCollisionShape.DiagonalUp) != TileCollisionShape.Free)
{
targetEdgeMap.AddEdge(new Point2(x, y + 1), new Point2(x + 1, y));
}
}
}
}
private static void AddBlockCollisionEdges(Grid <TileCollisionShape> collisionData, TileEdgeMap targetEdgeMap, Point2 edgeMapPos, Point2 totalSize)
{
int leftBorderPos = 0 - edgeMapPos.X;
int rightBorderPos = totalSize.X - edgeMapPos.X;
int topBorderPos = 0 - edgeMapPos.Y;
int bottomBorderPos = totalSize.Y - edgeMapPos.Y;
// Add block geometry to the specified edge map
for (int y = 0; y < SectorSize; y++)
{
for (int x = 0; x < SectorSize; x++)
{
// Skip non-solid blocks
bool center = (collisionData[x, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
if (!center)
{
continue;
}
// A filled block will always overwrite its inner diagonal edges
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y + 1));
targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y));
// Determine block collision neighbourhood
bool left = (x == 0) ? (x == leftBorderPos) : (collisionData[x - 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool right = (x == SectorSize - 1) ? (x == rightBorderPos) : (collisionData[x + 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool top = (y == 0) ? (y == topBorderPos) : (collisionData[x, y - 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool bottom = (y == SectorSize - 1) ? (y == bottomBorderPos) : (collisionData[x, y + 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
// Adjust outer edge states
if (center != left)
{
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x, y + 1));
}
else
{
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x, y + 1));
}
if (center != right)
{
targetEdgeMap.AddEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
}
else
{
targetEdgeMap.RemoveEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
}
if (center != top)
{
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x + 1, y));
}
else
{
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y));
}
if (center != bottom)
{
targetEdgeMap.AddEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
}
else
{
targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
}
}
}
// Detect diagonal fences next to solid blocks and remove the
// edges that might have become redundant. This can't be done
// in the above loop without complicating control flow, so it's
// done here.
for (int y = 0; y < SectorSize; y++)
{
for (int x = 0; x < SectorSize; x++)
{
TileCollisionShape centerShape = collisionData[x, y];
bool diagonalDown = (centerShape & TileCollisionShape.DiagonalDown) == TileCollisionShape.DiagonalDown;
bool diagonalUp = (centerShape & TileCollisionShape.DiagonalUp) == TileCollisionShape.DiagonalUp;
// Skip tiles that aren't diagonal fences
if (!diagonalDown && !diagonalUp)
{
continue;
}
// Determine block collision neighbourhood
bool left = (x == 0) ? (x == leftBorderPos) : (collisionData[x - 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool right = (x == SectorSize - 1) ? (x == rightBorderPos) : (collisionData[x + 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool top = (y == 0) ? (y == topBorderPos) : (collisionData[x, y - 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool bottom = (y == SectorSize - 1) ? (y == bottomBorderPos) : (collisionData[x, y + 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
// Remove perpendicular edges that are redundant because of the diagonal fence
// connecting two adjacent solid blocks.
if (diagonalDown)
{
if (top && right)
{
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y));
targetEdgeMap.RemoveEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
}
if (bottom && left)
{
targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x, y + 1));
}
}
else
{
if (top && left)
{
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y));
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x, y + 1));
}
if (bottom && right)
{
targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
targetEdgeMap.RemoveEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
}
}
}
}
}
private static void GetTileAreaOutlines(IReadOnlyGrid<bool> tileArea, Vector2 tileSize, ref List<Vector2[]> outlines)
{
// Initialize the container we'll put our outlines into
if (outlines == null)
outlines = new List<Vector2[]>();
else
outlines.Clear();
// Generate a data structure containing all visible edges
TileEdgeMap edgeMap = new TileEdgeMap(tileArea.Width + 1, tileArea.Height + 1);
for (int y = 0; y < edgeMap.Height; y++)
{
for (int x = 0; x < edgeMap.Width; x++)
{
// Determine highlight state of the four tiles around this node
bool topLeft = x > 0 && y > 0 && tileArea[x - 1, y - 1];
bool topRight = x < tileArea.Width && y > 0 && tileArea[x , y - 1];
bool bottomLeft = x > 0 && y < tileArea.Height && tileArea[x - 1, y ];
bool bottomRight = x < tileArea.Width && y < tileArea.Height && tileArea[x , y ];
// Determine which edges are visible
if (topLeft != topRight ) edgeMap.AddEdge(new Point2(x, y), new Point2(x , y - 1));
if (topRight != bottomRight) edgeMap.AddEdge(new Point2(x, y), new Point2(x + 1, y ));
if (bottomRight != bottomLeft ) edgeMap.AddEdge(new Point2(x, y), new Point2(x , y + 1));
if (bottomLeft != topLeft ) edgeMap.AddEdge(new Point2(x, y), new Point2(x - 1, y ));
}
}
// Traverse edges to form outlines until no more edges are left
RawList<Vector2> outlineBuilder = new RawList<Vector2>();
while (true)
{
// Find the beginning of an outline
Point2 current = edgeMap.FindNonEmpty();
if (current.X == -1 || current.Y == -1) break;
// Traverse it until no more edges are left
while (true)
{
Point2 next = edgeMap.GetClockwiseNextFrom(current);
if (next.X == -1 || next.Y == -1) break;
outlineBuilder.Add(next * tileSize);
edgeMap.RemoveEdge(current, next);
current = next;
}
// Close the loop by adding the first element again
if (outlineBuilder.Count > 0)
outlineBuilder.Add(outlineBuilder[0]);
// If we have enough vertices, keep the outline for drawing
Vector2[] outline = new Vector2[outlineBuilder.Count];
outlineBuilder.CopyTo(outline, 0);
outlines.Add(outline);
// Reset the outline builder to an empty state
outlineBuilder.Clear();
}
}
private static void GenerateCollisionShapes(TileEdgeMap edgeMap, Vector2 origin, Vector2 tileSize, bool roundedCorners, IList<ShapeInfo> shapeList)
{
// Traverse the edge map and gradually create chain / loop
// shapes until all edges have been used.
RawList<Point2> currentChain = new RawList<Point2>();
RawList<Vector2> vertexBuffer = new RawList<Vector2>();
while (true)
{
// Begin a new continuous chain of nodes
currentChain.Clear();
// Find a starting node for our current chain.
// If there is none, we found and handled all edges.
Point2 start = edgeMap.FindNonEmpty();
if (start == new Point2(-1, -1))
break;
// Traverse the current chain node-by-node from the start we found
Point2 current = start;
while (true)
{
// Add the current node to our continuous chain
currentChain.Add(current);
// Find the next node that connects to the current one.
// If there is none, our current chain is done.
Point2 next = edgeMap.GetClockwiseNextFrom(current);
if (next == new Point2(-1, -1))
break;
// Remove the edge we used to get to the next node
edgeMap.RemoveEdge(current, next);
// Use the next node as origin for traversing further
current = next;
}
// Generate a shape from the current chain
bool isLoop = (start == currentChain[currentChain.Count - 1]);
if (isLoop) currentChain.RemoveAt(currentChain.Count - 1);
vertexBuffer.Clear();
// Rounded corners
if (roundedCorners && currentChain.Count >= 3)
{
vertexBuffer.Reserve(currentChain.Count * 2);
vertexBuffer.Count = 0;
for (int i = 0; i < currentChain.Count; i++)
{
int prevIndex = (i - 1 + currentChain.Count) % currentChain.Count;
int nextIndex = (i + 1) % currentChain.Count;
Vector2 currentVert = origin + tileSize * (Vector2)currentChain[i];
Vector2 prevVert = origin + tileSize * (Vector2)currentChain[prevIndex];
Vector2 nextVert = origin + tileSize * (Vector2)currentChain[nextIndex];
if (nextVert - currentVert != currentVert - prevVert)
{
if (!isLoop && (i == 0 || i == currentChain.Count - 1))
{
vertexBuffer.Add(currentVert);
}
else
{
vertexBuffer.Add(currentVert + (prevVert - currentVert).Normalized * tileSize * 0.2f);
vertexBuffer.Add(currentVert + (nextVert - currentVert).Normalized * tileSize * 0.2f);
}
}
}
}
// Sharp corners
else
{
vertexBuffer.Reserve(currentChain.Count);
vertexBuffer.Count = 0;
for (int i = 0; i < currentChain.Count; i++)
{
int prevIndex = (i - 1 + currentChain.Count) % currentChain.Count;
int nextIndex = (i + 1) % currentChain.Count;
Vector2 currentVert = origin + tileSize * (Vector2)currentChain[i];
Vector2 prevVert = origin + tileSize * (Vector2)currentChain[prevIndex];
Vector2 nextVert = origin + tileSize * (Vector2)currentChain[nextIndex];
if (nextVert - currentVert != currentVert - prevVert)
vertexBuffer.Add(currentVert);
}
}
shapeList.Add(isLoop ?
(ShapeInfo)new LoopShapeInfo(vertexBuffer) :
(ShapeInfo)new ChainShapeInfo(vertexBuffer));
}
}
private static void AddFenceCollisionEdges(Grid<TileCollisionShape> collisionData, TileEdgeMap targetEdgeMap)
{
// Populate the edge map with all the collision fences
for (int y = 0; y < SectorSize; y++)
{
for (int x = 0; x < SectorSize; x++)
{
TileCollisionShape collision = collisionData[x, y];
// Skip both free and completely solid tiles
if (collision == TileCollisionShape.Free)
continue;
if ((collision & TileCollisionShape.Solid) == TileCollisionShape.Solid)
continue;
// Add the various fence collision types
if ((collision & TileCollisionShape.Top) != TileCollisionShape.Free)
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x + 1, y));
if ((collision & TileCollisionShape.Bottom) != TileCollisionShape.Free)
targetEdgeMap.AddEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
if ((collision & TileCollisionShape.Left) != TileCollisionShape.Free)
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x, y + 1));
if ((collision & TileCollisionShape.Right) != TileCollisionShape.Free)
targetEdgeMap.AddEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
if ((collision & TileCollisionShape.DiagonalDown) != TileCollisionShape.Free)
targetEdgeMap.AddEdge(new Point2(x, y), new Point2(x + 1, y + 1));
if ((collision & TileCollisionShape.DiagonalUp) != TileCollisionShape.Free)
targetEdgeMap.AddEdge(new Point2(x, y + 1), new Point2(x + 1, y));
}
}
}
private static void AddBorderCollisionEdges(TileEdgeMap targetEdgeMap, Point2 edgeMapPos, Point2 totalSize)
{
int rightBorderPos = totalSize.X - edgeMapPos.X;
int bottomBorderPos = totalSize.Y - edgeMapPos.Y;
// Top border
if (edgeMapPos.Y == 0)
{
for (int x = 1; x < Math.Min(targetEdgeMap.Width, rightBorderPos + 1); x++)
targetEdgeMap.AddEdge(new Point2(x - 1, 0), new Point2(x, 0));
}
// Bottom border
if (bottomBorderPos < targetEdgeMap.Height)
{
for (int x = 1; x < Math.Min(targetEdgeMap.Width, rightBorderPos + 1); x++)
targetEdgeMap.AddEdge(new Point2(x - 1, bottomBorderPos), new Point2(x, bottomBorderPos));
}
// Left border
if (edgeMapPos.X == 0)
{
for (int y = 1; y < Math.Min(targetEdgeMap.Height, bottomBorderPos + 1); y++)
targetEdgeMap.AddEdge(new Point2(0, y - 1), new Point2(0, y));
}
// Right border
if (rightBorderPos < targetEdgeMap.Width)
{
for (int y = 1; y < Math.Min(targetEdgeMap.Height, bottomBorderPos + 1); y++)
targetEdgeMap.AddEdge(new Point2(rightBorderPos, y - 1), new Point2(rightBorderPos, y));
}
}
private static void AddBlockCollisionEdges(Grid<TileCollisionShape> collisionData, TileEdgeMap targetEdgeMap, Point2 edgeMapPos, Point2 totalSize)
{
int leftBorderPos = 0 - edgeMapPos.X;
int rightBorderPos = totalSize.X - edgeMapPos.X;
int topBorderPos = 0 - edgeMapPos.Y;
int bottomBorderPos = totalSize.Y - edgeMapPos.Y;
// Add block geometry to the specified edge map
for (int y = 0; y < SectorSize; y++)
{
for (int x = 0; x < SectorSize; x++)
{
// Skip non-solid blocks
bool center = (collisionData[x, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
if (!center) continue;
// A filled block will always overwrite its inner diagonal edges
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y + 1));
targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y));
// Determine block collision neighbourhood
bool left = (x == 0) ? (x == leftBorderPos ) : (collisionData[x - 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool right = (x == SectorSize - 1) ? (x == rightBorderPos ) : (collisionData[x + 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool top = (y == 0) ? (y == topBorderPos ) : (collisionData[x, y - 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool bottom = (y == SectorSize - 1) ? (y == bottomBorderPos) : (collisionData[x, y + 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
// Adjust outer edge states
if (center != left ) targetEdgeMap.AddEdge (new Point2(x, y), new Point2(x, y + 1));
else targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x, y + 1));
if (center != right) targetEdgeMap.AddEdge (new Point2(x + 1, y), new Point2(x + 1, y + 1));
else targetEdgeMap.RemoveEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
if (center != top) targetEdgeMap.AddEdge (new Point2(x, y), new Point2(x + 1, y));
else targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y));
if (center != bottom) targetEdgeMap.AddEdge (new Point2(x, y + 1), new Point2(x + 1, y + 1));
else targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
}
}
// Detect diagonal fences next to solid blocks and remove the
// edges that might have become redundant. This can't be done
// in the above loop without complicating control flow, so it's
// done here.
for (int y = 0; y < SectorSize; y++)
{
for (int x = 0; x < SectorSize; x++)
{
TileCollisionShape centerShape = collisionData[x, y];
bool diagonalDown = (centerShape & TileCollisionShape.DiagonalDown) == TileCollisionShape.DiagonalDown;
bool diagonalUp = (centerShape & TileCollisionShape.DiagonalUp) == TileCollisionShape.DiagonalUp;
// Skip tiles that aren't diagonal fences
if (!diagonalDown && !diagonalUp) continue;
// Determine block collision neighbourhood
bool left = (x == 0) ? (x == leftBorderPos ) : (collisionData[x - 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool right = (x == SectorSize - 1) ? (x == rightBorderPos ) : (collisionData[x + 1, y] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool top = (y == 0) ? (y == topBorderPos ) : (collisionData[x, y - 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
bool bottom = (y == SectorSize - 1) ? (y == bottomBorderPos) : (collisionData[x, y + 1] & TileCollisionShape.Solid) == TileCollisionShape.Solid;
// Remove perpendicular edges that are redundant because of the diagonal fence
// connecting two adjacent solid blocks.
if (diagonalDown)
{
if (top && right)
{
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y));
targetEdgeMap.RemoveEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
}
if (bottom && left)
{
targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x, y + 1));
}
}
else
{
if (top && left)
{
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x + 1, y));
targetEdgeMap.RemoveEdge(new Point2(x, y), new Point2(x, y + 1));
}
if (bottom && right)
{
targetEdgeMap.RemoveEdge(new Point2(x, y + 1), new Point2(x + 1, y + 1));
targetEdgeMap.RemoveEdge(new Point2(x + 1, y), new Point2(x + 1, y + 1));
}
}
}
}
}
