// X Y MultiPoints: Total Length = 28 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 8 Integer 1 Little
// Byte 12 Xmin Double 1 Little
// Byte 20 Ymin Double 1 Little
// Byte 28 Xmax Double 1 Little
// Byte 36 Ymax Double 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte X Points Point NumPoints Little
// X Y M MultiPoints: Total Length = 34 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 28 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumPoints Integer 1 Little
// Byte X Points Point NumPoints Little
// Byte Y* Mmin Double 1 Little
// Byte Y + 8* Mmax Double 1 Little
// Byte Y + 16* Marray Double NumPoints Little
// X Y Z M MultiPoints: Total Length = 44 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 18 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumPoints Integer 1 Little
// Byte X Points Point NumPoints Little
// Byte Y Zmin Double 1 Little
// Byte Y + 8 Zmax Double 1 Little
// Byte Y + 16 Zarray Double NumPoints Little
// Byte Z* Mmin Double 1 Little
// Byte Z+8* Mmax Double 1 Little
// Byte Z+16* Marray Double NumPoints Little
private void FillPoints(string fileName, IProgressHandler progressHandler)
{
// Check to ensure the fileName is not null
if (fileName == null)
{
throw new NullReferenceException(DataStrings.ArgumentNull_S.Replace("%S", fileName));
}
if (File.Exists(fileName) == false)
{
throw new FileNotFoundException(DataStrings.FileNotFound_S.Replace("%S", fileName));
}
// Get the basic header information.
ShapefileHeader header = new ShapefileHeader(fileName);
Extent = new Extent(new[] { header.Xmin, header.Ymin, header.Xmax, header.Ymax });
// Check to ensure that the fileName is the correct shape type
if (header.ShapeType != ShapeType.MultiPoint &&
header.ShapeType != ShapeType.MultiPointM &&
header.ShapeType != ShapeType.MultiPointZ)
{
throw new ArgumentException(DataStrings.FileNotLines_S.Replace("%S", fileName));
}
// Reading the headers gives us an easier way to track the number of shapes and their overall length etc.
List<ShapeHeader> shapeHeaders = ReadIndexFile(fileName);
// This will set up a reader so that we can read values in huge chunks, which is much faster than one value at a time.
BufferedBinaryReader bbReader = new BufferedBinaryReader(fileName, progressHandler);
if (bbReader.FileLength == 100)
{
// The shapefile is empty so we can simply return here
bbReader.Close();
return;
}
// Skip the shapefile header by skipping the first 100 bytes in the shapefile
bbReader.Seek(100, SeekOrigin.Begin);
int numShapes = shapeHeaders.Count;
byte[] bigEndians = new byte[numShapes * 8];
byte[] allBounds = new byte[numShapes * 32];
ByteBlock allCoords = new ByteBlock(BLOCKSIZE);
bool isM = (header.ShapeType == ShapeType.MultiPointZ || header.ShapeType == ShapeType.MultiPointM);
bool isZ = (header.ShapeType == ShapeType.PolyLineZ);
ByteBlock allZ = null;
ByteBlock allM = null;
if (isZ)
{
allZ = new ByteBlock(BLOCKSIZE);
}
if (isM)
{
allM = new ByteBlock(BLOCKSIZE);
}
int pointOffset = 0;
for (int shp = 0; shp < numShapes; shp++)
{
// Read from the index file because some deleted records
// might still exist in the .shp file.
long offset = (shapeHeaders[shp].ByteOffset);
bbReader.Seek(offset, SeekOrigin.Begin);
// time: 200 ms
ShapeRange shape = new ShapeRange(FeatureType.MultiPoint)
{
RecordNumber = bbReader.ReadInt32(false),
ContentLength = bbReader.ReadInt32(false),
ShapeType = (ShapeType)bbReader.ReadInt32(),
StartIndex = pointOffset
};
//bbReader.Read(bigEndians, shp * 8, 8);
if (shape.ShapeType == ShapeType.NullShape)
{
continue;
}
bbReader.Read(allBounds, shp * 32, 32);
shape.NumParts = 1;
shape.NumPoints = bbReader.ReadInt32();
allCoords.Read(shape.NumPoints * 16, bbReader);
pointOffset += shape.NumPoints;
if (header.ShapeType == ShapeType.MultiPointM)
{
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (shape.ContentLength * 2 > 44 + 4 * shape.NumParts + 16 * shape.NumPoints)
{
IExtentM mExt = (IExtentM)MyExtent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null) allM.Read(shape.NumPoints * 8, bbReader);
}
}
if (header.ShapeType == ShapeType.MultiPointZ)
{
bool hasM = shape.ContentLength * 2 > 60 + 4 * shape.NumParts + 24 * shape.NumPoints;
IExtentZ zExt = (IExtentZ)MyExtent;
zExt.MinZ = bbReader.ReadDouble();
zExt.MaxZ = bbReader.ReadDouble();
// For Z shapefiles, the Z part is not optional.
if (allZ != null) allZ.Read(shape.NumPoints * 8, bbReader);
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (hasM)
{
IExtentM mExt = (IExtentM)MyExtent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null) allM.Read(shape.NumPoints * 8, bbReader);
}
}
// Now that we have read all the values, create the geometries from the points and parts arrays.
ShapeIndices.Add(shape);
}
double[] vert = allCoords.ToDoubleArray();
Vertex = vert;
if (isM) M = allM.ToDoubleArray();
if (isZ) Z = allZ.ToDoubleArray();
Array.Reverse(bigEndians);
List<ShapeRange> shapes = ShapeIndices;
double[] bounds = new double[numShapes * 4];
Buffer.BlockCopy(allBounds, 0, bounds, 0, allBounds.Length);
for (int shp = 0; shp < numShapes; shp++)
{
ShapeRange shape = shapes[shp];
shape.Extent = new Extent(bounds, shp * 4);
int endIndex = shape.NumPoints + shape.StartIndex;
int startIndex = shape.StartIndex;
int count = endIndex - startIndex;
PartRange partR = new PartRange(vert, shape.StartIndex, 0, FeatureType.MultiPoint) { NumVertices = count };
shape.Parts.Add(partR);
}
bbReader.Dispose();
}
// X Y Poly Lines: Total Length = 28 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 3 Integer 1 Little
// Byte 12 Xmin Double 1 Little
// Byte 20 Ymin Double 1 Little
// Byte 28 Xmax Double 1 Little
// Byte 36 Ymax Double 1 Little
// Byte 44 NumParts Integer 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte 52 Parts Integer NumParts Little
// Byte X Points Point NumPoints Little
// X Y M Poly Lines: Total Length = 34 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 23 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumParts Integer 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte 52 Parts Integer NumParts Little
// Byte X Points Point NumPoints Little
// Byte Y* Mmin Double 1 Little
// Byte Y + 8* Mmax Double 1 Little
// Byte Y + 16* Marray Double NumPoints Little
// X Y Z M Poly Lines: Total Length = 44 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 13 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumParts Integer 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte 52 Parts Integer NumParts Little
// Byte X Points Point NumPoints Little
// Byte Y Zmin Double 1 Little
// Byte Y + 8 Zmax Double 1 Little
// Byte Y + 16 Zarray Double NumPoints Little
// Byte Z* Mmin Double 1 Little
// Byte Z+8* Mmax Double 1 Little
// Byte Z+16* Marray Double NumPoints Little
private void FillPolygons(string fileName, IProgressHandler progressHandler)
{
// Check to ensure the fileName is not null
if (fileName == null)
{
throw new NullReferenceException(DataStrings.ArgumentNull_S.Replace("%S", fileName));
}
if (File.Exists(fileName) == false)
{
throw new FileNotFoundException(DataStrings.FileNotFound_S.Replace("%S", fileName));
}
// Get the basic header information.
ShapefileHeader header = new ShapefileHeader(fileName);
Extent = new Extent(new[] { header.Xmin, header.Ymin, header.Xmax, header.Ymax });
// Check to ensure that the fileName is the correct shape type
if (header.ShapeType != ShapeType.Polygon &&
header.ShapeType != ShapeType.PolygonM &&
header.ShapeType != ShapeType.PolygonZ)
{
throw new ArgumentException(DataStrings.FileNotLines_S.Replace("%S", fileName));
}
// Reading the headers gives us an easier way to track the number of shapes and their overall length etc.
List<ShapeHeader> shapeHeaders = ReadIndexFile(fileName);
// TO DO: replace with a normal reader. We no longer need Buffered Binary reader as
// the buffer can be set on the underlying file stream.
BufferedBinaryReader bbReader = new BufferedBinaryReader(fileName, progressHandler);
if (bbReader.FileLength == 100)
{
// The shapefile is empty so we can simply return here
bbReader.Close();
return;
}
// Skip the shapefile header by skipping the first 100 bytes in the shapefile
bbReader.Seek(100, SeekOrigin.Begin);
int numShapes = shapeHeaders.Count;
int[] partOffsets = new int[numShapes];
//byte[] allBounds = new byte[numShapes * 32];
// probably all will be in one block, but use a byteBlock just in case.
ByteBlock allParts = new ByteBlock(BLOCKSIZE);
ByteBlock allCoords = new ByteBlock(BLOCKSIZE);
bool isM = (header.ShapeType == ShapeType.PolygonM || header.ShapeType == ShapeType.PolygonZ);
bool isZ = (header.ShapeType == ShapeType.PolygonZ);
ByteBlock allZ = null;
ByteBlock allM = null;
if (isZ)
{
allZ = new ByteBlock(BLOCKSIZE);
}
if (isM)
{
allM = new ByteBlock(BLOCKSIZE);
}
int pointOffset = 0;
for (int shp = 0; shp < numShapes; shp++)
{
// Read from the index file because some deleted records
// might still exist in the .shp file.
long offset = (shapeHeaders[shp].ByteOffset);
bbReader.Seek(offset, SeekOrigin.Begin);
// Position Value Type Number Byte Order
ShapeRange shape = new ShapeRange(FeatureType.Polygon); //------------------------------------
shape.RecordNumber = bbReader.ReadInt32(false); // Byte 0 Record Integer 1 Big
shape.ContentLength = bbReader.ReadInt32(false); // Byte 4 Length Integer 1 Big
// Setting shape type also controls extent class type.
shape.ShapeType = (ShapeType)bbReader.ReadInt32(); // Byte 8 Type Integer 1 Little
shape.StartIndex = pointOffset;
if (shape.ShapeType == ShapeType.NullShape)
{
continue;
}
shape.Extent.MinX = bbReader.ReadDouble();
shape.Extent.MinY = bbReader.ReadDouble();
shape.Extent.MaxX = bbReader.ReadDouble();
shape.Extent.MaxY = bbReader.ReadDouble();
shape.NumParts = bbReader.ReadInt32(); // Byte 44 #Parts Integer 1 Little
shape.NumPoints = bbReader.ReadInt32(); // Byte 48 #Points Integer 1 Little
partOffsets[shp] = allParts.IntOffset();
allParts.Read(shape.NumParts * 4, bbReader);
allCoords.Read(shape.NumPoints * 16, bbReader);
pointOffset += shape.NumPoints;
if (header.ShapeType == ShapeType.PolygonM)
{
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (shape.ContentLength * 2 > 44 + 4 * shape.NumParts + 16 * shape.NumPoints)
{
IExtentM mExt = (IExtentM)shape.Extent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null) allM.Read(shape.NumPoints * 8, bbReader);
}
}
if (header.ShapeType == ShapeType.PolygonZ)
{
bool hasM = shape.ContentLength * 2 > 60 + 4 * shape.NumParts + 24 * shape.NumPoints;
IExtentZ zExt = (IExtentZ)shape.Extent;
zExt.MinZ = bbReader.ReadDouble();
zExt.MaxZ = bbReader.ReadDouble();
// For Z shapefiles, the Z part is not optional.
if (allZ != null) allZ.Read(shape.NumPoints * 8, bbReader);
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (hasM)
{
IExtentM mExt = (IExtentM)shape.Extent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null) allM.Read(shape.NumPoints * 8, bbReader);
}
}
ShapeIndices.Add(shape);
}
double[] vert = allCoords.ToDoubleArray();
Vertex = vert;
if (isM) M = allM.ToDoubleArray();
if (isZ) Z = allZ.ToDoubleArray();
List<ShapeRange> shapes = ShapeIndices;
//double[] bounds = new double[numShapes * 4];
//Buffer.BlockCopy(allBounds, 0, bounds, 0, allBounds.Length);
int[] parts = allParts.ToIntArray();
ProgressMeter = new ProgressMeter(ProgressHandler, "Testing Parts and Holes", shapes.Count);
for (int shp = 0; shp < shapes.Count; shp++)
{
ShapeRange shape = shapes[shp];
//shape.Extent = new Extent(bounds, shp * 4);
for (int part = 0; part < shape.NumParts; part++)
{
int offset = partOffsets[shp];
int endIndex = shape.NumPoints + shape.StartIndex;
int startIndex = parts[offset + part] + shape.StartIndex;
if (part < shape.NumParts - 1) endIndex = parts[offset + part + 1] + shape.StartIndex;
int count = endIndex - startIndex;
PartRange partR = new PartRange(vert, shape.StartIndex, parts[offset + part], FeatureType.Polygon);
partR.NumVertices = count;
shape.Parts.Add(partR);
}
ProgressMeter.CurrentValue = shp;
}
ProgressMeter.Reset();
}
private void FillLines(string fileName, IProgressHandler progressHandler)
{
// Check to ensure the fileName is not null
if (fileName == null)
{
throw new NullReferenceException(DataStrings.ArgumentNull_S.Replace("%S", "fileName"));
}
if (File.Exists(fileName) == false)
{
throw new FileNotFoundException(DataStrings.FileNotFound_S.Replace("%S", fileName));
}
// Get the basic header information.
ShapefileHeader header = new ShapefileHeader(fileName);
Extent = new Extent(new[] { header.Xmin, header.Ymin, header.Xmax, header.Ymax });
// Check to ensure that the fileName is the correct shape type
if (header.ShapeType != ShapeType.PolyLine &&
header.ShapeType != ShapeType.PolyLineM &&
header.ShapeType != ShapeType.PolyLineZ)
{
throw new ArgumentException(DataStrings.FileNotLines_S.Replace("%S", fileName));
}
// Reading the headers gives us an easier way to track the number of shapes and their overall length etc.
List <ShapeHeader> shapeHeaders = ReadIndexFile(fileName);
// This will set up a reader so that we can read values in huge chunks, which is much faster
// than one value at a time.
BufferedBinaryReader bbReader = new BufferedBinaryReader(fileName, progressHandler);
if (bbReader.FileLength == 100)
{
// We have reached the end of the file so we can close the file
bbReader.Close();
return;
}
// Skip the shapefile header by skipping the first 100 bytes in the shapefile
bbReader.Seek(100, SeekOrigin.Begin);
int numShapes = shapeHeaders.Count;
int[] partOffsets = new int[numShapes];
byte[] allBounds = new byte[numShapes * 32];
// probably all will be in one block, but use a byteBlock just in case.
ByteBlock allParts = new ByteBlock(BLOCKSIZE);
ByteBlock allCoords = new ByteBlock(BLOCKSIZE);
bool isM = (header.ShapeType == ShapeType.PolyLineM || header.ShapeType == ShapeType.PolyLineZ);
bool isZ = (header.ShapeType == ShapeType.PolyLineZ);
ByteBlock allZ = null;
ByteBlock allM = null;
if (isZ)
{
allZ = new ByteBlock(BLOCKSIZE);
}
if (isM)
{
allM = new ByteBlock(BLOCKSIZE);
}
int pointOffset = 0;
for (int shp = 0; shp < numShapes; shp++)
{
// Read from the index file because some deleted records
// might still exist in the .shp file.
long offset = (shapeHeaders[shp].ByteOffset);
bbReader.Seek(offset, SeekOrigin.Begin);
ShapeRange shape = new ShapeRange(FeatureType.Line)
{
RecordNumber = bbReader.ReadInt32(false),
ContentLength = bbReader.ReadInt32(false),
ShapeType = (ShapeType)bbReader.ReadInt32(),
StartIndex = pointOffset
};
if (shape.ShapeType == ShapeType.NullShape)
{
goto fin;
}
bbReader.Read(allBounds, shp * 32, 32);
shape.NumParts = bbReader.ReadInt32(); // Byte 44 NumParts Integer 1 Little
shape.NumPoints = bbReader.ReadInt32(); // Byte 48 NumPoints Integer 1 Little
partOffsets[shp] = allParts.IntOffset();
allParts.Read(shape.NumParts * 4, bbReader);
allCoords.Read(shape.NumPoints * 16, bbReader);
pointOffset += shape.NumPoints;
if (header.ShapeType == ShapeType.PolyLineM)
{
// These are listed as "optional" but there isn't a good indicator of how to
// determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (shape.ContentLength * 2 > 44 + 4 * shape.NumParts + 16 * shape.NumPoints)
{
//mMin = bbReader.ReadDouble();
//mMax = bbReader.ReadDouble();
bbReader.Seek(16, SeekOrigin.Current);
if (allM != null)
{
allM.Read(shape.NumPoints * 8, bbReader);
}
}
}
if (header.ShapeType == ShapeType.PolyLineZ)
{
bool hasM = shape.ContentLength * 2 > 60 + 4 * shape.NumParts + 24 * shape.NumPoints;
IExtentZ zExt = (IExtentZ)shape.Extent;
zExt.MinZ = bbReader.ReadDouble();
zExt.MaxZ = bbReader.ReadDouble();
if (allZ != null)
{
allZ.Read(shape.NumPoints * 8, bbReader);
}
// These are listed as "optional" but there isn't a good indicator of how to
// determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
IExtentM mExt = (IExtentM)shape.Extent;
if (hasM)
{
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null)
{
allM.Read(shape.NumPoints * 8, bbReader);
}
}
}
// Now that we have read all the values, create the geometries from the points and parts arrays.
fin:
ShapeIndices.Add(shape);
}
double[] vert = allCoords.ToDoubleArray();
Vertex = vert;
if (isM)
{
M = allM.ToDoubleArray();
}
if (isZ)
{
Z = allZ.ToDoubleArray();
}
List <ShapeRange> shapes = ShapeIndices;
double[] bounds = new double[numShapes * 4];
Buffer.BlockCopy(allBounds, 0, bounds, 0, allBounds.Length);
int[] parts = allParts.ToIntArray();
for (int shp = 0; shp < numShapes; shp++)
{
ShapeRange shape = shapes[shp];
shape.Extent = new Extent(bounds, shp * 4);
for (int part = 0; part < shape.NumParts; part++)
{
int offset = partOffsets[shp];
int endIndex = shape.NumPoints + shape.StartIndex;
int startIndex = parts[offset + part] + shape.StartIndex;
if (part < shape.NumParts - 1)
{
int prt = parts[offset + part + 1];
endIndex = prt + shape.StartIndex;
}
int count = endIndex - startIndex;
PartRange partR = new PartRange(vert, shape.StartIndex, parts[offset + part], FeatureType.Line)
{
NumVertices = count
};
shape.Parts.Add(partR);
}
}
bbReader.Dispose();
}
// X Y Poly Lines: Total Length = 28 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 3 Integer 1 Little
// Byte 12 Xmin Double 1 Little
// Byte 20 Ymin Double 1 Little
// Byte 28 Xmax Double 1 Little
// Byte 36 Ymax Double 1 Little
// Byte 44 NumParts Integer 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte 52 Parts Integer NumParts Little
// Byte X Points Point NumPoints Little
// X Y M Poly Lines: Total Length = 34 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 23 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumParts Integer 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte 52 Parts Integer NumParts Little
// Byte X Points Point NumPoints Little
// Byte Y* Mmin Double 1 Little
// Byte Y + 8* Mmax Double 1 Little
// Byte Y + 16* Marray Double NumPoints Little
// X Y Z M Poly Lines: Total Length = 44 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 13 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumParts Integer 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte 52 Parts Integer NumParts Little
// Byte X Points Point NumPoints Little
// Byte Y Zmin Double 1 Little
// Byte Y + 8 Zmax Double 1 Little
// Byte Y + 16 Zarray Double NumPoints Little
// Byte Z* Mmin Double 1 Little
// Byte Z+8* Mmax Double 1 Little
// Byte Z+16* Marray Double NumPoints Little
private void FillPolygons(string fileName, IProgressHandler progressHandler)
{
// Check to ensure the fileName is not null
if (fileName == null)
{
throw new NullReferenceException(DataStrings.ArgumentNull_S.Replace("%S", fileName));
}
if (File.Exists(fileName) == false)
{
throw new FileNotFoundException(DataStrings.FileNotFound_S.Replace("%S", fileName));
}
// Get the basic header information.
ShapefileHeader header = new ShapefileHeader(fileName);
Extent = new Extent(new[] { header.Xmin, header.Ymin, header.Xmax, header.Ymax });
// Check to ensure that the fileName is the correct shape type
if (header.ShapeType != ShapeType.Polygon &&
header.ShapeType != ShapeType.PolygonM &&
header.ShapeType != ShapeType.PolygonZ)
{
throw new ArgumentException(DataStrings.FileNotLines_S.Replace("%S", fileName));
}
// Reading the headers gives us an easier way to track the number of shapes and their overall length etc.
List <ShapeHeader> shapeHeaders = ReadIndexFile(fileName);
// TO DO: replace with a normal reader. We no longer need Buffered Binary reader as
// the buffer can be set on the underlying file stream.
BufferedBinaryReader bbReader = new BufferedBinaryReader(fileName, progressHandler);
if (bbReader.FileLength == 100)
{
// The shapefile is empty so we can simply return here
bbReader.Close();
return;
}
// Skip the shapefile header by skipping the first 100 bytes in the shapefile
bbReader.Seek(100, SeekOrigin.Begin);
int numShapes = shapeHeaders.Count;
int[] partOffsets = new int[numShapes];
//byte[] allBounds = new byte[numShapes * 32];
// probably all will be in one block, but use a byteBlock just in case.
ByteBlock allParts = new ByteBlock(BLOCKSIZE);
ByteBlock allCoords = new ByteBlock(BLOCKSIZE);
bool isM = (header.ShapeType == ShapeType.PolygonM || header.ShapeType == ShapeType.PolygonZ);
bool isZ = (header.ShapeType == ShapeType.PolygonZ);
ByteBlock allZ = null;
ByteBlock allM = null;
if (isZ)
{
allZ = new ByteBlock(BLOCKSIZE);
}
if (isM)
{
allM = new ByteBlock(BLOCKSIZE);
}
int pointOffset = 0;
for (int shp = 0; shp < numShapes; shp++)
{
// Read from the index file because some deleted records
// might still exist in the .shp file.
long offset = (shapeHeaders[shp].ByteOffset);
bbReader.Seek(offset, SeekOrigin.Begin);
// Position Value Type Number Byte Order
ShapeRange shape = new ShapeRange(FeatureType.Polygon); //------------------------------------
shape.RecordNumber = bbReader.ReadInt32(false); // Byte 0 Record Integer 1 Big
shape.ContentLength = bbReader.ReadInt32(false); // Byte 4 Length Integer 1 Big
// Setting shape type also controls extent class type.
shape.ShapeType = (ShapeType)bbReader.ReadInt32(); // Byte 8 Type Integer 1 Little
shape.StartIndex = pointOffset;
if (shape.ShapeType == ShapeType.NullShape)
{
continue;
}
shape.Extent.MinX = bbReader.ReadDouble();
shape.Extent.MinY = bbReader.ReadDouble();
shape.Extent.MaxX = bbReader.ReadDouble();
shape.Extent.MaxY = bbReader.ReadDouble();
shape.NumParts = bbReader.ReadInt32(); // Byte 44 #Parts Integer 1 Little
shape.NumPoints = bbReader.ReadInt32(); // Byte 48 #Points Integer 1 Little
partOffsets[shp] = allParts.IntOffset();
allParts.Read(shape.NumParts * 4, bbReader);
allCoords.Read(shape.NumPoints * 16, bbReader);
pointOffset += shape.NumPoints;
if (header.ShapeType == ShapeType.PolygonM)
{
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (shape.ContentLength * 2 > 44 + 4 * shape.NumParts + 16 * shape.NumPoints)
{
IExtentM mExt = (IExtentM)shape.Extent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null)
{
allM.Read(shape.NumPoints * 8, bbReader);
}
}
}
if (header.ShapeType == ShapeType.PolygonZ)
{
bool hasM = shape.ContentLength * 2 > 60 + 4 * shape.NumParts + 24 * shape.NumPoints;
IExtentZ zExt = (IExtentZ)shape.Extent;
zExt.MinZ = bbReader.ReadDouble();
zExt.MaxZ = bbReader.ReadDouble();
// For Z shapefiles, the Z part is not optional.
if (allZ != null)
{
allZ.Read(shape.NumPoints * 8, bbReader);
}
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (hasM)
{
IExtentM mExt = (IExtentM)shape.Extent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null)
{
allM.Read(shape.NumPoints * 8, bbReader);
}
}
}
ShapeIndices.Add(shape);
}
double[] vert = allCoords.ToDoubleArray();
Vertex = vert;
if (isM)
{
M = allM.ToDoubleArray();
}
if (isZ)
{
Z = allZ.ToDoubleArray();
}
List <ShapeRange> shapes = ShapeIndices;
//double[] bounds = new double[numShapes * 4];
//Buffer.BlockCopy(allBounds, 0, bounds, 0, allBounds.Length);
int[] parts = allParts.ToIntArray();
ProgressMeter = new ProgressMeter(ProgressHandler, "Testing Parts and Holes", shapes.Count);
for (int shp = 0; shp < shapes.Count; shp++)
{
ShapeRange shape = shapes[shp];
//shape.Extent = new Extent(bounds, shp * 4);
for (int part = 0; part < shape.NumParts; part++)
{
int offset = partOffsets[shp];
int endIndex = shape.NumPoints + shape.StartIndex;
int startIndex = parts[offset + part] + shape.StartIndex;
if (part < shape.NumParts - 1)
{
endIndex = parts[offset + part + 1] + shape.StartIndex;
}
int count = endIndex - startIndex;
PartRange partR = new PartRange(vert, shape.StartIndex, parts[offset + part], FeatureType.Polygon);
partR.NumVertices = count;
shape.Parts.Add(partR);
}
ProgressMeter.CurrentValue = shp;
}
ProgressMeter.Reset();
}
// X Y MultiPoints: Total Length = 28 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 8 Integer 1 Little
// Byte 12 Xmin Double 1 Little
// Byte 20 Ymin Double 1 Little
// Byte 28 Xmax Double 1 Little
// Byte 36 Ymax Double 1 Little
// Byte 48 NumPoints Integer 1 Little
// Byte X Points Point NumPoints Little
// X Y M MultiPoints: Total Length = 34 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 28 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumPoints Integer 1 Little
// Byte X Points Point NumPoints Little
// Byte Y* Mmin Double 1 Little
// Byte Y + 8* Mmax Double 1 Little
// Byte Y + 16* Marray Double NumPoints Little
// X Y Z M MultiPoints: Total Length = 44 Bytes
// ---------------------------------------------------------
// Position Value Type Number Byte Order
// ---------------------------------------------------------
// Byte 0 Record Number Integer 1 Big
// Byte 4 Content Length Integer 1 Big
// Byte 8 Shape Type 18 Integer 1 Little
// Byte 12 Box Double 4 Little
// Byte 44 NumPoints Integer 1 Little
// Byte X Points Point NumPoints Little
// Byte Y Zmin Double 1 Little
// Byte Y + 8 Zmax Double 1 Little
// Byte Y + 16 Zarray Double NumPoints Little
// Byte Z* Mmin Double 1 Little
// Byte Z+8* Mmax Double 1 Little
// Byte Z+16* Marray Double NumPoints Little
private void FillPoints(string fileName, IProgressHandler progressHandler)
{
// Check to ensure the fileName is not null
if (fileName == null)
{
throw new NullReferenceException(DataStrings.ArgumentNull_S.Replace("%S", "fileName"));
}
if (File.Exists(fileName) == false)
{
throw new FileNotFoundException(DataStrings.FileNotFound_S.Replace("%S", fileName));
}
// Get the basic header information.
ShapefileHeader header = new ShapefileHeader(fileName);
Extent = header.ToExtent();
// Check to ensure that the fileName is the correct shape type
if (header.ShapeType != ShapeType.MultiPoint &&
header.ShapeType != ShapeType.MultiPointM &&
header.ShapeType != ShapeType.MultiPointZ)
{
throw new ArgumentException(DataStrings.FileNotLines_S.Replace("%S", fileName));
}
// Reading the headers gives us an easier way to track the number of shapes and their overall length etc.
List <ShapeHeader> shapeHeaders = ReadIndexFile(fileName);
// This will set up a reader so that we can read values in huge chunks, which is much faster than one value at a time.
BufferedBinaryReader bbReader = new BufferedBinaryReader(fileName, progressHandler);
if (bbReader.FileLength == 100)
{
// The shapefile is empty so we can simply return here
bbReader.Close();
return;
}
// Skip the shapefile header by skipping the first 100 bytes in the shapefile
bbReader.Seek(100, SeekOrigin.Begin);
int numShapes = shapeHeaders.Count;
byte[] bigEndians = new byte[numShapes * 8];
byte[] allBounds = new byte[numShapes * 32];
ByteBlock allCoords = new ByteBlock(BLOCKSIZE);
bool isM = (header.ShapeType == ShapeType.MultiPointZ || header.ShapeType == ShapeType.MultiPointM);
bool isZ = (header.ShapeType == ShapeType.MultiPointZ);
ByteBlock allZ = null;
ByteBlock allM = null;
if (isZ)
{
allZ = new ByteBlock(BLOCKSIZE);
}
if (isM)
{
allM = new ByteBlock(BLOCKSIZE);
}
int pointOffset = 0;
for (int shp = 0; shp < numShapes; shp++)
{
// Read from the index file because some deleted records
// might still exist in the .shp file.
long offset = (shapeHeaders[shp].ByteOffset);
bbReader.Seek(offset, SeekOrigin.Begin);
// time: 200 ms
ShapeRange shape = new ShapeRange(FeatureType.MultiPoint)
{
RecordNumber = bbReader.ReadInt32(false),
ContentLength = bbReader.ReadInt32(false),
ShapeType = (ShapeType)bbReader.ReadInt32(),
StartIndex = pointOffset
};
//bbReader.Read(bigEndians, shp * 8, 8);
if (shape.ShapeType == ShapeType.NullShape)
{
continue;
}
bbReader.Read(allBounds, shp * 32, 32);
shape.NumParts = 1;
shape.NumPoints = bbReader.ReadInt32();
allCoords.Read(shape.NumPoints * 16, bbReader);
pointOffset += shape.NumPoints;
if (header.ShapeType == ShapeType.MultiPointM)
{
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (shape.ContentLength * 2 > 44 + 4 * shape.NumParts + 16 * shape.NumPoints)
{
IExtentM mExt = (IExtentM)MyExtent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null)
{
allM.Read(shape.NumPoints * 8, bbReader);
}
}
}
if (header.ShapeType == ShapeType.MultiPointZ)
{
bool hasM = shape.ContentLength * 2 > 60 + 4 * shape.NumParts + 24 * shape.NumPoints;
IExtentZ zExt = (IExtentZ)MyExtent;
zExt.MinZ = bbReader.ReadDouble();
zExt.MaxZ = bbReader.ReadDouble();
// For Z shapefiles, the Z part is not optional.
if (allZ != null)
{
allZ.Read(shape.NumPoints * 8, bbReader);
}
// These are listed as "optional" but there isn't a good indicator of
// how to determine if they were added.
// To handle the "optional" M values, check the contentLength for the feature.
// The content length does not include the 8-byte record header and is listed in 16-bit words.
if (hasM)
{
IExtentM mExt = (IExtentM)MyExtent;
mExt.MinM = bbReader.ReadDouble();
mExt.MaxM = bbReader.ReadDouble();
if (allM != null)
{
allM.Read(shape.NumPoints * 8, bbReader);
}
}
}
// Now that we have read all the values, create the geometries from the points and parts arrays.
ShapeIndices.Add(shape);
}
double[] vert = allCoords.ToDoubleArray();
Vertex = vert;
if (isM)
{
M = allM.ToDoubleArray();
}
if (isZ)
{
Z = allZ.ToDoubleArray();
}
Array.Reverse(bigEndians);
List <ShapeRange> shapes = ShapeIndices;
double[] bounds = new double[numShapes * 4];
Buffer.BlockCopy(allBounds, 0, bounds, 0, allBounds.Length);
for (int shp = 0; shp < numShapes; shp++)
{
ShapeRange shape = shapes[shp];
shape.Extent = new Extent(bounds, shp * 4);
int endIndex = shape.NumPoints + shape.StartIndex;
int startIndex = shape.StartIndex;
int count = endIndex - startIndex;
PartRange partR = new PartRange(vert, shape.StartIndex, 0, FeatureType.MultiPoint)
{
NumVertices = count
};
shape.Parts.Add(partR);
}
bbReader.Dispose();
}