private void PresentRunDiagDialog(DiagService ds)
{
RunDiagForm runDiagForm = new RunDiagForm(ds);
if (runDiagForm.ShowDialog() == DialogResult.OK)
{
Connection.ExecUserDiagJob(runDiagForm.Result, ds);
}
}
/*
* test: med40
*
* jg: dumping pres
* jg: q: SID_RQ pos byte: 0 size bytes: 1 modecfg:323 fieldtype: IntegerType dump: 2E 00 00 00
* jg: q: RecordDataIdentifier pos byte: 1 size bytes: 2 modecfg:324 fieldtype: IntegerType dump: 01 10 00 00
* jg: q: #0 pos byte: 33 size bytes: 16 modecfg:6430 fieldtype: BitDumpType dump:
* jg: q: #1 pos byte: 49 size bytes: 1 modecfg:6423 fieldtype: IntegerType dump:
* jg: q: #2 pos byte: 50 size bytes: 1 modecfg:6423 fieldtype: IntegerType dump:
* jg: q: #3 pos byte: 51 size bytes: 1 modecfg:6423 fieldtype: IntegerType dump:
* jg: q: #4 pos byte: 52 size bytes: 1 modecfg:6423 fieldtype: IntegerType dump:
* jg: q: #5 pos byte: 3 size bytes: 50 modecfg:6410 fieldtype: ExtendedBitDumpType dump:
* jg: done dumping pres
*
*/
public static void DoVariantCoding(ECUConnection connection, VCForm vcForm, bool writesEnabled)
{
Console.WriteLine($"Operator requesting for VC: {BitUtility.BytesToHex(vcForm.VCValue, true)}");
RunDiagForm runDiagForm = new RunDiagForm(vcForm.WriteService);
// construct a write command from presentations: fill up the VC value first, fill up all available dumps, then inherit the last values (fingerprints, scn) from the read command
byte[] vcParameter = vcForm.VCValue;
byte[] writeCommand = vcForm.WriteService.RequestBytes;
byte[] priorReadCommand = vcForm.UnfilteredReadValue;
// start with a list of all values that we will have to fill
List <DiagPreparation> preparationsToProcess = new List <DiagPreparation>(vcForm.WriteService.InputPreparations);
// fill up vc, which pretty much always uses the ExtendedBitDumpType type
DiagPreparation vcPrep = preparationsToProcess.Find(x => x.FieldType == DiagPreparation.InferredDataType.ExtendedBitDumpType);
if (vcPrep is null)
{
MessageBox.Show("VC: Could not find the VC ExtendedBitDump prep, stopping early to save your ECU.", "VC Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
int vcPrepSizeInBytes = vcPrep.SizeInBits / 8;
int vcPrepBytePosition = vcPrep.BitPosition / 8;
if (vcPrepSizeInBytes < vcParameter.Length)
{
MessageBox.Show("VC: VC string is longer than the parameter can fit, stopping early to save your ECU.", "VC Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
// zero out the destination buffer for the param that we intend to write since there's a possibility that our param is shorter than the actual prep's size
for (int i = vcPrepBytePosition; i < (vcPrepBytePosition + vcPrepSizeInBytes); i++)
{
writeCommand[i] = 0;
}
// copy the parameter in
Array.ConstrainedCopy(vcParameter, 0, writeCommand, vcPrepBytePosition, vcParameter.Length);
preparationsToProcess.Remove(vcPrep);
// done with vc prep
// merge prefilled constants such as the (SID_RQ, id..)
List <DiagPreparation> prefilledValues = new List <DiagPreparation>();
foreach (DiagPreparation prep in preparationsToProcess)
{
if (prep.Dump.Length > 0)
{
prefilledValues.Add(prep);
if (prep.FieldType == DiagPreparation.InferredDataType.IntegerType)
{
byte[] fixedDump = prep.Dump.Take(prep.SizeInBits / 8).Reverse().ToArray();
Array.ConstrainedCopy(vcParameter, 0, writeCommand, vcPrepBytePosition, vcParameter.Length);
}
else
{
Console.WriteLine($"Skipping prefill for {prep.Qualifier} as the data type {prep.FieldType} is unsupported.");
}
}
}
// "mark" the constants as done
foreach (DiagPreparation prep in prefilledValues)
{
preparationsToProcess.Remove(prep);
}
// isolate the SCN if it exists
foreach (DiagPreparation prep in preparationsToProcess)
{
int bytePosition = prep.BitPosition / 8;
int byteLength = prep.SizeInBits / 8;
// SCN is always 16-bytes
if (byteLength != 16)
{
continue;
}
byte[] originalValue = new byte[byteLength];
Array.ConstrainedCopy(priorReadCommand, bytePosition, originalValue, 0, byteLength);
// SCN values are ASCII numerals (between 0x30 - 0x39)
bool isValidSCN = true;
foreach (byte b in originalValue)
{
if ((b > 0x39) || (b < 0x30))
{
isValidSCN = false;
break;
}
}
if (!isValidSCN)
{
continue;
}
Console.WriteLine($"Found SCN value: {Encoding.ASCII.GetString(originalValue)}");
// check if operator is using vediamo-style variant-coding, where the SCN is set to 0000000000000000 when writing VC
// otherwise, we can reuse the last value as read from the ECU
bool useVediamoBehaviorZeroSCN = Preferences.GetValue(Preferences.PreferenceKey.EnableSCNZero) == "true";
if (useVediamoBehaviorZeroSCN)
{
for (int i = 0; i < originalValue.Length; i++)
{
originalValue[i] = 0x30;
}
}
Console.WriteLine($"Using {Encoding.ASCII.GetString(originalValue)} as new SCN value");
// write-back the recognized (and optionally, modified) SCN
Array.ConstrainedCopy(originalValue, 0, writeCommand, bytePosition, byteLength);
preparationsToProcess.Remove(prep);
break;
}
// isolate the fingerprint if it exists
// normally fingerprint is appended at the tail of the VC command
List <int> tailIndices = new List <int>()
{
writeCommand.Length - 1, writeCommand.Length - 2, writeCommand.Length - 3, writeCommand.Length - 4
};
List <DiagPreparation> possibleFingerprintFields = new List <DiagPreparation>();
foreach (DiagPreparation prep in preparationsToProcess)
{
int bytePosition = prep.BitPosition / 8;
int byteLength = prep.SizeInBits / 8;
if ((prep.FieldType == DiagPreparation.InferredDataType.IntegerType) && (byteLength == 1) && (tailIndices.Contains(bytePosition)))
{
tailIndices.Remove(bytePosition);
possibleFingerprintFields.Add(prep);
}
}
if (possibleFingerprintFields.Count == 4)
{
// copy in the fingerprint, and "mark" the constants as done
byte[] fingerprint = priorReadCommand.Skip(priorReadCommand.Length - 4).ToArray();
Console.WriteLine($"Found original fingerprint as {BitUtility.BytesToHex(fingerprint)}");
// default behavior is to clone last fingerprint, else use stored fingerprint
if (Preferences.GetValue(Preferences.PreferenceKey.EnableFingerprintClone) == "false")
{
uint altFingerprintValue = uint.Parse(Preferences.GetValue(Preferences.PreferenceKey.FingerprintValue));
fingerprint[3] = (byte)(altFingerprintValue & 0xFF);
altFingerprintValue >>= 8;
fingerprint[2] = (byte)(altFingerprintValue & 0xFF);
altFingerprintValue >>= 8;
fingerprint[1] = (byte)(altFingerprintValue & 0xFF);
altFingerprintValue >>= 8;
fingerprint[0] = (byte)(altFingerprintValue & 0xFF);
}
Console.WriteLine($"Using {BitUtility.BytesToHex(fingerprint)} as new fingerprint value.");
Array.ConstrainedCopy(fingerprint, 0, writeCommand, writeCommand.Length - 4, 4);
foreach (DiagPreparation prep in possibleFingerprintFields)
{
preparationsToProcess.Remove(prep);
}
}
// at this point, whatever that's left in preparationsToProcess are stuff that are variable, but should be copied verbatim from the original read request (e.g. fingerprints, scn)
// log the assumptions, show it the operator just in case
StringBuilder assumptionsMade = new StringBuilder();
if (preparationsToProcess.Count > 0)
{
if (writeCommand.Length != priorReadCommand.Length)
{
MessageBox.Show("There are some preparations that do not have a default value. \r\n" +
"The input and output values do not have matching lengths, which means that the automatic assumption may be wrong. \r\n" +
"Please be very careful when proceeding.", "Warning");
}
foreach (DiagPreparation prep in preparationsToProcess)
{
int bytePosition = prep.BitPosition / 8;
int byteLength = prep.SizeInBits / 8;
Array.ConstrainedCopy(priorReadCommand, bytePosition, writeCommand, bytePosition, byteLength);
assumptionsMade.Append($"{prep.Qualifier} : {BitUtility.BytesToHex(priorReadCommand.Skip(bytePosition).Take(byteLength).ToArray(), true)}\r\n");
}
}
/*
* // lazy me dumping the values
* for (int i = 0; i < vcForm.WriteService.InputPreparations.Count; i++)
* {
* DiagPreparation prep = vcForm.WriteService.InputPreparations[i];
* Console.WriteLine($"debug: q: {prep.Qualifier} pos byte: {(prep.BitPosition / 8)} size bytes: {(prep.SizeInBits / 8)} modecfg:{prep.ModeConfig:X} fieldtype: {prep.FieldType} dump: {BitUtility.BytesToHex(prep.Dump, true)}");
* }
*/
// we are done preparing the command, if we are confident we can send the command straight to the ECU, else, let the user review
if (assumptionsMade.Length > 0)
{
if (MessageBox.Show("Some assumptions were made when preparing the write parameters. \r\n\r\n" +
"You may wish to review them by selecting Cancel, or select OK to execute the write command immediately.\r\n\r\n" + assumptionsMade.ToString(),
"Review assumptions", MessageBoxButtons.OKCancel, MessageBoxIcon.Information) == DialogResult.OK)
{
ExecVCWrite(writeCommand, vcForm.WriteService, connection, writesEnabled);
}
else
{
runDiagForm.Result = writeCommand;
if (runDiagForm.ShowDialog() == DialogResult.OK)
{
ExecVCWrite(runDiagForm.Result, vcForm.WriteService, connection, writesEnabled);
}
}
}
else
{
// everything accounted for, immediately write
ExecVCWrite(writeCommand, vcForm.WriteService, connection, writesEnabled);
}
}
