void updateTable(trackDataListLog logX, trackDataListLog logY)
{
dgvDataTable.Columns.Clear();
foreach (string headText in new List <string>
{
"深度", logX.itemHeadInforDraw.sLogName, "深度", logY.itemHeadInforDraw.sLogName, "plotX", "plotY"
})
{
DataGridViewTextBoxColumn col = new DataGridViewTextBoxColumn();
col.HeaderText = headText;
dgvDataTable.Columns.Add(col);
}
int iLineMax = logX.fListMD.Count;
if (logY.fListMD.Count > logX.fListMD.Count)
{
iLineMax = logY.fListMD.Count;
}
for (int i = 0; i < iLineMax; i++)
{
this.dgvDataTable.Rows.Add();
if (i < logX.fListMD.Count)
{
dgvDataTable.Rows[i].Cells[0].Value = logX.fListMD[i].ToString();
dgvDataTable.Rows[i].Cells[1].Value = logX.fListValue[i].ToString();
}
if (i < logY.fListMD.Count)
{
dgvDataTable.Rows[i].Cells[2].Value = logY.fListMD[i].ToString();
dgvDataTable.Rows[i].Cells[3].Value = logY.fListValue[i].ToString();
}
}
}
void initializaForm()
{
trackDataListLog dlTrackDataListLog = cSVGSectionTrackLog.getLogSeriersFromLogFile(sJH, sLogName);
if (trackTypeStr == TypeTrack.曲线道.ToString())
{
dgvDataTable.Columns.Clear();
dgvDataTable.Columns.Add("topDepth", "深度");
dgvDataTable.Columns.Add("value", "数值");
if (dlTrackDataListLog.fListMD.Count > 1)
{
dgvDataTable.Rows.Add(dlTrackDataListLog.fListMD.Count);
}
else
{
dgvDataTable.Rows.Add();
}
}
int iCount = dgvDataTable.ColumnCount;
for (int i = 0; i < dlTrackDataListLog.fListMD.Count; i++)
{
dgvDataTable.Rows[i].Cells[0].Value = dlTrackDataListLog.fListMD[i].ToString("0.00");
dgvDataTable.Rows[i].Cells[1].Value = dlTrackDataListLog.fListValue[i].ToString("0.00");
}
}
private void btnSelectLog_Click(object sender, EventArgs e)
{
fTop = float.Parse(this.nTBXtop.Text);
fBot = float.Parse(this.nTBXbot.Text);
if (this.cbbLog.SelectedIndex >= 0)
{
string sLogX = cbbLog.SelectedItem.ToString();
if (sLogX != null)
{
this.curLog = cIOinputLog.getLogSeriersFromSectionWellFromLogFile(sJH, sLogX, fTop, fBot);
}
}
dgvDataTable.Columns.Clear();
foreach (string headText in new List <string> {
"深度", curLog.itemHeadInforDraw.sLogName, "深度", "新曲线"
})
{
DataGridViewTextBoxColumn col = new DataGridViewTextBoxColumn();
col.HeaderText = headText;
dgvDataTable.Columns.Add(col);
}
int iLineMax = curLog.fListMD.Count;
for (int i = 0; i < iLineMax; i++)
{
this.dgvDataTable.Rows.Add();
if (i < curLog.fListMD.Count)
{
dgvDataTable.Rows[i].Cells[0].Value = curLog.fListMD[i].ToString();
dgvDataTable.Rows[i].Cells[1].Value = curLog.fListValue[i].ToString();
}
}
}
double getIntervalLogValue(trackDataListLog logDataList, ItemTrackDrawDataIntervalProperty dataItem)
{
List <double> ltCurDouble = new List <double>();
for (int i = 0; i < logDataList.fListMD.Count; i++)
{
if (logDataList.fListMD[i] >= dataItem.top && logDataList.fListMD[i] <= dataItem.bot)
{
ltCurDouble.Add(logDataList.fListValue[i]);
}
}
return(ltCurDouble.Average());
}
public static trackDataListLog getLogSeriersFromSectionWell(string sJHSelected, string sLogname, int dfDS1Show, int dfDS2Show)
{
trackDataListLog sttTrackLogDataList = new trackDataListLog();
string filePathLogTXT = Path.Combine(cProjectManager.dirPathLog, sJHSelected + "_$#log");
if (File.Exists(filePathLogTXT))
{
using (StreamReader sr = new StreamReader(filePathLogTXT, Encoding.UTF8))
{
String line;
string[] split;
int iLineIndex = 0;
int iIndex = 0;
while ((line = sr.ReadLine()) != null) //delete the line whose legth is 0
{
iLineIndex++;
split = line.Trim().Split(new char[] { ' ', '\t' }, StringSplitOptions.RemoveEmptyEntries);
if (iLineIndex == 1)
{
iIndex = split.ToList().IndexOf(sLogname);
}
else if (iLineIndex % 2 == 0) //抽稀一半点数。
{
float fDepth = float.Parse(split[0]);
if (fDepth >= dfDS1Show && fDepth <= dfDS2Show)
{
sttTrackLogDataList.fListMD.Add(fDepth);
if (iIndex >= 0)
{
sttTrackLogDataList.fListValue.Add(float.Parse(split[iIndex]));
}
else
{
sttTrackLogDataList.fListValue.Add(-999);
}
}
}
}
}
}
return(sttTrackLogDataList);
}
void setUpDataList()
{
fTop = float.Parse(this.nTBXtop.Text);
fBot = float.Parse(this.nTBXbot.Text);
if (cbbXLog.SelectedIndex >= 0)
{
string sLogX = cbbXLog.SelectedItem.ToString();
if (sLogX != null)
{
logX = cIOinputLog.getLogSeriersFromSectionWellFromLogFile(sJH, sLogX, fTop, fBot);
}
}
if (cbbYLog.SelectedIndex >= 0)
{
string sLogY = cbbYLog.SelectedItem.ToString();
if (sLogY != null)
{
logY = cIOinputLog.getLogSeriersFromSectionWellFromLogFile(sJH, sLogY, fTop, fBot);
}
}
}
//按深度段从sectionWell 里得到值
public static trackDataListLog getLogSeriersFromSectionWellFromLogFile(string sJH, string sLogName, double dfTop, double dfBot)
{
trackDataListLog sttTrackLogDataList = new trackDataListLog();
sttTrackLogDataList.itemHeadInforDraw.sLogName = sLogName;
string _filepath = Path.Combine(cProjectManager.dirPathWellDir, sJH, sLogName + cProjectManager.fileExtensionWellLog);
if (!File.Exists(_filepath))
{
return(sttTrackLogDataList);
}
else
{
using (StreamReader sr = new StreamReader(_filepath, Encoding.UTF8))
{
string _line;
int lineIndex = 0;
int _iDataStartLine = 4; //
while ((_line = sr.ReadLine()) != null) //抽稀
{
lineIndex++;
if (lineIndex > _iDataStartLine) //抽稀了一半数据
{
string[] split = _line.Trim().Split(new char[] { ' ', '\t' }, StringSplitOptions.RemoveEmptyEntries);
float top;
double value;
if (float.TryParse(split[0], out top) && double.TryParse(split[1], out value))
{
if (dfTop <= top && top <= dfBot)
{
sttTrackLogDataList.fListMD.Add(top);
sttTrackLogDataList.fListValue.Add(value);
}
}
}
}//end while
}
}
return(sttTrackLogDataList);
}
void initialForm(double fDepth)
{
for (int kk = 0; kk < makeSectionWell.ltTrackLog.Count; kk++)
{
trackDataListLog itemLog = makeSectionWell.ltTrackLog[kk];
Label newLogInfor = new Label();
newLogInfor.Text = itemLog.itemHeadInforDraw.sLogName;
double fValue = -999;
for (int i = 0; i < itemLog.fListMD.Count - 1; i++)
{
if (itemLog.fListMD[i] <= fDepth && itemLog.fListMD[i + 1] >= fDepth)
{
fValue = (float)itemLog.fListValue[i];
break;
}
}
newLogInfor.Text += " = " + fValue.ToString("0.00");
newLogInfor.Location = new Point(10, 20 * kk);
newLogInfor.AutoSize = true;
this.Controls.Add(newLogInfor);
}
this.Height = 50 + makeSectionWell.ltTrackLog.Count * 20;
}
public static cSVGSectionWell makePathWell(cSVGDocSection svgSection, string pathSectionCss, string filePathTemplatOper, double dfDS1Show, double dfDS2Show, float fVScale, cXEGeopage curPage)
{
cSVGSectionWell wellGeoSingle = new cSVGSectionWell(svgSection.svgDoc);
List <int> iListTrackWidth = new List <int>();
//从配置文件读取显示深度
string sJH = cXmlBase.getNodeInnerText(filePathTemplatOper, cXmlDocSectionWell.fullPathJH);
//绝对值不放大fvscale，位置放大。
ItemWell wellItem = cProjectData.ltProjectWell.FirstOrDefault(p => p.sJH == sJH);
int iHeightMapTitle = int.Parse(cXmlBase.getNodeInnerText(filePathTemplatOper, cXEWellPage.fullPathMapTitleRectHeight));
int iHeightTrackHead = int.Parse(cXmlBase.getNodeInnerText(filePathTemplatOper, cXEWellPage.fullPathTrackRectHeight));
iListTrackWidth.Clear();
XmlElement returnElemment;
float dfDS1ShowTVD = cIOinputWellPath.getTVDByJHAndMD(wellItem, (float)dfDS1Show);
int iYpositionTrackHead = Convert.ToInt16(dfDS1ShowTVD * fVScale) - iHeightTrackHead;
foreach (XmlElement el_Track in cXmlDocSectionWell.getTrackNodes(filePathTemplatOper))
{
//初始化绘制道的基本信息
trackDataDraw curTrackDraw = new trackDataDraw(el_Track);
//增加道头
returnElemment = cSVGSectionTrack.trackHead(svgSection.svgDoc, curTrackDraw.sTrackID, curTrackDraw.sTrackTitle, iYpositionTrackHead, iHeightTrackHead, curTrackDraw.iTrackWidth, curTrackDraw.iTrackHeadFontSize, curTrackDraw.sWriteMode);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
//增加距离位置节点
cXmlDocSectionGeo.addWellTrackXviewNode(pathSectionCss, sJH, curTrackDraw.sTrackID, iListTrackWidth.Sum());
//先画曲线，再画道头和道框，这样好看
#region 判断是否可见，可见才绘制
if (curTrackDraw.iVisible > 0)
{
#region 井深结构尺
if (el_Track["trackType"].InnerText == TypeTrack.深度尺.ToString())
{
itemDrawDataDepthRuler itemRuler = new itemDrawDataDepthRuler(el_Track);
//测试斜井gPathWellCone
returnElemment = cSVGSectionTrackWellRuler.gPathWellRuler(wellItem, svgSection, Convert.ToInt16(dfDS1Show), Convert.ToInt16(dfDS2Show), fVScale, itemRuler);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
#endregion
#region 地层道
if (curTrackDraw.sTrackType == TypeTrack.分层.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn);
if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackLayer.gTrackItemTVDLayer(svgSection.svgDoc, item, fVScale, curTrackDraw.iTrackFontSize, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
}
#endregion
#region 测井解释，旋回,化石道
if (cProjectManager.ltStrTrackTypeIntervalProperty.IndexOf(curTrackDraw.sTrackType) >= 0)
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn); if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackJSJL.gTrackItemTVDJSJL(svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
if (curTrackDraw.sTrackType == TypeTrack.沉积旋回.ToString())
{
returnElemment = cSVGSectionTrackCycle.gTrackItemTVDGeoCycle(svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
}
// if (curTrackDraw.sTrackType == TypeTrack.描述.ToString()) returnElemment = cSVGSectionTrackDes.gTrackItemFossil(svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
}
#endregion
#region 岩性
if (curTrackDraw.sTrackType == TypeTrack.岩性层段.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
itemDrawDataIntervalValue item = new itemDrawDataIntervalValue(xn);
if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackLitho.gTrackLithoTVDItem(wellItem, svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
}
#endregion
#region 曲线道
List <itemLogHeadInforDraw> ltItemLogHeadInforDraw = new List <itemLogHeadInforDraw>(); //记录绘制道头用，节省重新读取的时间
if (curTrackDraw.sTrackType == TypeTrack.曲线道.ToString())
{
cSVGSectionTrackLogCurveFill.listLogViewData4fill.Clear();
XmlNodeList xnList = el_Track.SelectNodes(".//Log");
int iLogNum = 0;
bool bGrid = false; //记录网格是否绘制过。
foreach (XmlElement xnLog in xnList)
{
iLogNum++;
itemLogHeadInforDraw curLogHead = new itemLogHeadInforDraw(xnLog);
ltItemLogHeadInforDraw.Add(curLogHead);
if (curLogHead.iIsLog > 0)
{
if (curLogHead.fLeftValue <= 0)
{
curLogHead.fLeftValue = 1;
cXmlBase.setSelectedNodeChildNodeValue(filePathTemplatOper, "", "leftValue", "1");
}
curLogHead.iLogGridGrade = cSVGSectionTrackLog.getNumGridGroupInLog(curLogHead.fLeftValue, curLogHead.fRightValue);
}
//曲线是否可见
if (curLogHead.iLogCurveVisible > 0)
{
trackDataListLog dlTrackDataListLog = cSVGSectionTrackLog.getLogSeriersFromLogFile(sJH, curLogHead.sLogName, dfDS1Show, dfDS2Show);
//画曲线
returnElemment = cSVGSectionTrackLog.gTrackTVDLog(wellItem, svgSection.svgDoc, curLogHead, curTrackDraw.iTrackWidth, dlTrackDataListLog.fListMD, dlTrackDataListLog.fListValue, fVScale);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
} //曲线可见
} //结束曲线循环
} //结束曲线if
#endregion 结束曲线道
#region 绘制测井图头,测井图信息很重要，图形加载数据要捕捉测井头的ID
if (curTrackDraw.sTrackType == TypeTrack.曲线道.ToString())
{
int iLogNum = 0;
foreach (itemLogHeadInforDraw curLogHead in ltItemLogHeadInforDraw)
{
iLogNum++;
if (curLogHead.iIsLog > 0)
{
if (curLogHead.fLeftValue <= 0)
{
curLogHead.fLeftValue = 1;
}
curLogHead.iLogGridGrade = cSVGSectionTrackLog.getNumGridGroupInLog(curLogHead.fLeftValue, curLogHead.fRightValue);
}
if (curLogHead.iLogCurveVisible > 0)
{
//增加测井头
int iHeadLogSize = 14;
returnElemment = cSVGSectionTrack.addTrackItemLogHeadInfor(svgSection.svgDoc, curLogHead, iYpositionTrackHead + iHeightTrackHead, iLogNum, curTrackDraw.iTrackWidth, iHeadLogSize);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
#endregion
//绘制道框
if (curPage.iShowTrackRect == 1)
{
returnElemment = cSVGSectionTrack.trackRect(svgSection.svgDoc, curTrackDraw.sTrackID, dfDS1ShowTVD, dfDS2Show, fVScale, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
iListTrackWidth.Add(curTrackDraw.iTrackWidth);
}
#endregion
} //end of for add track
//增加图头
returnElemment = wellGeoSingle.mapHeadTitle(sJH, iYpositionTrackHead - iHeightMapTitle, iYpositionTrackHead, iHeightMapTitle, iListTrackWidth.Sum(), iHeightMapTitle * 2 / 3);
wellGeoSingle.addTrack(returnElemment, 0);
return(wellGeoSingle);
}
void updateCrossPlot(trackDataListLog logX, trackDataListLog logY)
{
List <double> listDoubleX = new List <double>();
List <double> listDoubleY = new List <double>();
int iLineMax = logX.fListMD.Count;
if (logY.fListMD.Count == logX.fListMD.Count) //MD个数相同
{
listDoubleX = logX.fListValue;
listDoubleY = logY.fListValue;
}
else //MDList个数不同，找个数少的，这块误差可能选取的深度段 高低不同，如果 深度段无交叉是个要考虑的问题
{
if (logY.fListMD.Count < logX.fListMD.Count)
{
iLineMax = logY.fListMD.Count;
int jStart = 0;
for (int i = 0; i < iLineMax; i++)
{
listDoubleY.Add(logY.fListValue[i]);
//为了保证序列个数相同，fValue给个初始值。不科学 需要改进
double fValue = logX.fListValue[i];
//由于深度序列是上升的，上次结束位置作为此次的开始位置。
for (int j = jStart; j < logX.fListMD.Count; j++)
{
//深度绝对值误差小于0.125 赋值 下次循环的起始位置改变，跳出赋值循环
if (Math.Abs(logX.fListMD[j] - logY.fListMD[i]) < 0.125)
{
fValue = logX.fListValue[j];
jStart = j;
break;
}
}
listDoubleX.Add(fValue);
}
}
if (logY.fListMD.Count > logX.fListMD.Count)
{
iLineMax = logX.fListMD.Count;
int jStart = 0;
for (int i = 0; i < iLineMax; i++)
{
listDoubleX.Add(logX.fListValue[i]);
double fValue = logY.fListValue[i];
for (int j = jStart; j < logY.fListMD.Count; j++)
{
if (Math.Abs(logY.fListMD[j] - logX.fListMD[i]) < 0.125)
{
fValue = logY.fListValue[j];
jStart = j;
break;
}
}
listDoubleY.Add(fValue);
}
}
}
chart1.Titles.Clear();
string sTitle = logX.itemHeadInforDraw.sLogName + "-" + logY.itemHeadInforDraw.sLogName + "交汇图";
chart1.Titles.Add(sTitle);
//刻度值
int iLeftX = (int)float.Parse(ntbxXLeft.Text);
chart1.ChartAreas[0].AxisX.Minimum = iLeftX;
int iRightX = (int)float.Parse(ntbxXRight.Text);
chart1.ChartAreas[0].AxisX.Maximum = iRightX;
int iLeftY = (int)float.Parse(ntbxYLeft.Text);
chart1.ChartAreas[0].AxisY.Minimum = iLeftY;
int iRightY = (int)float.Parse(ntbxYRight.Text);
chart1.ChartAreas[0].AxisY.Maximum = iRightY;
//网格
chart1.ChartAreas[0].AxisX.MajorGrid.Enabled = this.cbxGridMainX.Checked;
chart1.ChartAreas[0].AxisX.MinorGrid.Enabled = this.cbxGridMinX.Checked;
chart1.ChartAreas[0].AxisY.MajorGrid.Enabled = this.cbxGridMainY.Checked;
chart1.ChartAreas[0].AxisY.MinorGrid.Enabled = this.cbxGridMinY.Checked;
//tickMark interval
float fXinterval = 1;
chart1.ChartAreas[0].AxisX.MinorTickMark.Enabled = true;
if (this.ntbxXInterval.Text != "")
{
float.TryParse(this.ntbxXInterval.Text, out fXinterval);
}
chart1.ChartAreas[0].AxisX.MinorTickMark.Interval = fXinterval;
float fYinterval = 1;
chart1.ChartAreas[0].AxisY.MinorTickMark.Enabled = true;
if (this.ntbxYInterval.Text != "")
{
float.TryParse(this.ntbxYInterval.Text, out fYinterval);
}
chart1.ChartAreas[0].AxisY.MinorTickMark.Interval = fYinterval;
//标题
chart1.ChartAreas[0].AxisX.Title = logX.itemHeadInforDraw.sLogName;
chart1.ChartAreas[0].AxisY.Title = logY.itemHeadInforDraw.sLogName;
chart1.ChartAreas[0].AxisX.IsLogarithmic = cbxXlog.Checked;
chart1.ChartAreas[0].AxisY.IsLogarithmic = cbxYlog.Checked;
//绘图数据写入表格第5列 第6列
for (int i = 0; i < listDoubleX.Count; i++)
{
dgvDataTable.Rows[i].Cells[4].Value = listDoubleX[i].ToString();
dgvDataTable.Rows[i].Cells[5].Value = listDoubleY[i].ToString();
}
chart1.Series["Series1"].Points.DataBindXY(listDoubleX.ToArray(), listDoubleY.ToArray());
chart1.Show();
}
void updateCrossPlot(trackDataListLog logX, trackDataListLog logY, List <ItemTrackDrawDataIntervalProperty> ltDataItem)
{
chart1.Titles.Clear();
string sTitle = logX.itemHeadInforDraw.sLogName + "-" + logY.itemHeadInforDraw.sLogName + "交汇图";
chart1.Titles.Add(sTitle);
chart1.Series.Clear();
chart1.Legends.Clear();
List <string> ltStrType = ltDataItem.Select(p => p.sProperty).Distinct().ToList();
foreach (string sType in ltStrType)
{
chart1.Series.Add(sType);
chart1.Series[sType].ChartType = System.Windows.Forms.DataVisualization.Charting.SeriesChartType.Point;
chart1.Series[sType].IsVisibleInLegend = true;
chart1.Legends.Add(new Legend(sType));
chart1.Series[sType].Legend = sType;
chart1.Legends[sType].Docking = Docking.Bottom;
chart1.Legends[sType].IsDockedInsideChartArea = false;
chart1.Legends[sType].IsEquallySpacedItems = true;
chart1.Legends[sType].LegendStyle = LegendStyle.Row;
chart1.Legends[sType].Alignment = System.Drawing.StringAlignment.Center;
chart1.Series[sType].MarkerSize = 6;
chart1.Series[sType].MarkerStyle = System.Windows.Forms.DataVisualization.Charting.MarkerStyle.Circle;
List <double> listDoubleX = new List <double>();
List <double> listDoubleY = new List <double>();
foreach (ItemTrackDrawDataIntervalProperty dataItem in ltDataItem)
{
if (dataItem.sProperty == sType)
{
listDoubleX.Add(getIntervalLogValue(logX, dataItem));
listDoubleY.Add(getIntervalLogValue(logY, dataItem));
}
chart1.Series[sType].Points.DataBindXY(listDoubleX.ToArray(), listDoubleY.ToArray());
}
}
//刻度值
int iLeftX = (int)float.Parse(ntbxXLeft.Text);
chart1.ChartAreas[0].AxisX.Minimum = iLeftX;
int iRightX = (int)float.Parse(ntbxXRight.Text);
chart1.ChartAreas[0].AxisX.Maximum = iRightX;
int iLeftY = (int)float.Parse(ntbxYLeft.Text);
chart1.ChartAreas[0].AxisY.Minimum = iLeftY;
int iRightY = (int)float.Parse(ntbxYRight.Text);
chart1.ChartAreas[0].AxisY.Maximum = iRightY;
//网格
chart1.ChartAreas[0].AxisX.MajorGrid.Enabled = this.cbxGridMainX.Checked;
chart1.ChartAreas[0].AxisX.MinorGrid.Enabled = this.cbxGridMinX.Checked;
chart1.ChartAreas[0].AxisY.MajorGrid.Enabled = this.cbxGridMainY.Checked;
chart1.ChartAreas[0].AxisY.MinorGrid.Enabled = this.cbxGridMinY.Checked;
//tickMark interval
float fXinterval = 1;
chart1.ChartAreas[0].AxisX.MinorTickMark.Enabled = true;
if (this.ntbxXInterval.Text != "")
{
float.TryParse(this.ntbxXInterval.Text, out fXinterval);
}
chart1.ChartAreas[0].AxisX.MinorTickMark.Interval = fXinterval;
float fYinterval = 1;
chart1.ChartAreas[0].AxisY.MinorTickMark.Enabled = true;
if (this.ntbxYInterval.Text != "")
{
float.TryParse(this.ntbxYInterval.Text, out fYinterval);
}
chart1.ChartAreas[0].AxisY.MinorTickMark.Interval = fYinterval;
//标题
chart1.ChartAreas[0].AxisX.Title = logX.itemHeadInforDraw.sLogName;
chart1.ChartAreas[0].AxisY.Title = logY.itemHeadInforDraw.sLogName;
chart1.ChartAreas[0].AxisX.IsLogarithmic = cbxXlog.Checked;
chart1.ChartAreas[0].AxisY.IsLogarithmic = cbxYlog.Checked;
chart1.Show();
}
public static void makeWellLayerSectionGraph(string filePathTemplatOper, double fTopShow, double fBotShow, double fVScale)
{
string filePathWellsvg = filePathTemplatOper.Replace(".xml", ".svg");
List <int> iListTrackWidth = new List <int>();
List <string> ListLegend = new List <string>(); //图例
XmlDocument curDoc = new XmlDocument();
curDoc.Load(filePathTemplatOper);
string sJH = cXmlBase.getNodeInnerText(curDoc, cXmlDocSectionWell.fullPathJH);
string sMapTitle = cXmlBase.getNodeInnerText(curDoc, cXEWellPage.fullPathMapTitle);
//图幅全部用px基本单位，fVScale已经包含了 px-> 到应用单位的转换。
double dfDS1Show = fTopShow;
double dfDS2Show = fBotShow;
double iDx = 0;
//这种是上移式图头绘制模式 与 遮盖式图头绘制模式严格位置不同
double iYpositionTitle = 0;
double iDy = -dfDS1Show * fVScale;
int iShowMode = int.Parse(cXmlBase.getNodeInnerText(curDoc, cXEWellPage.fullPathShowMode));
double PageWidth = 1000;
double PageHeight = (dfDS2Show - dfDS1Show) * fVScale + 20;
//以上代码执行2毫秒，不必优化了
cSVGBaseSection cSingleWell = new cSVGBaseSection(PageWidth, PageHeight, iDx, iDy, "px"); //全部用px 单位转换用算法实现
iListTrackWidth.Clear();
XmlElement returnElemment;
foreach (XmlElement el_Track in cXmlDocSectionWell.getTrackNodes(curDoc))
{
//初始化绘制道的基本信息
trackDataDraw curTrackDraw = new trackDataDraw(el_Track);
//定义一个新层 装道。 但是 也有问题，会有下面的遮盖问题。
//先画曲线，再画道头和道框，这样好看
if (curTrackDraw.iVisible > 0) //判断是否可见，可见才绘制
{
#region 深度道
if (curTrackDraw.sTrackType == TypeTrack.深度尺.ToString())
{
int mainTick = int.Parse(el_Track["mainScale"].InnerText);
int minTick = int.Parse(el_Track["minScale"].InnerText);
int tickFontSize = int.Parse(el_Track["fontSize"].InnerText);
returnElemment = cSVGSectionTrackWellRuler.gMDRuler(cSingleWell.svgDoc, cSingleWell.svgDefs, cSingleWell.svgCss, Convert.ToInt16(dfDS1Show), Convert.ToInt16(dfDS2Show), mainTick, minTick, fVScale, tickFontSize);
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
# endregion
# region 文本道
if (curTrackDraw.sTrackType == TypeTrack.文本道.ToString())
{
int iAlignMode = 0;
if (el_Track["iAlignMode"] != null)
{
iAlignMode = int.Parse(el_Track["iAlignMode"].InnerText);
}
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn);
if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackText.gTrackItemText(cSingleWell.svgDoc, item.sID, item.top, item.bot, fVScale, item.sText, curTrackDraw.iTrackFontSize, iAlignMode, curTrackDraw.iTrackWidth, item.sProperty, curTrackDraw.sWriteMode);
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
}
}
}
#endregion
#region 符号图道
if (curTrackDraw.sTrackType == TypeTrack.符号.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn);
returnElemment = cSVGSectionTrackSymbol.gTrackIntervalSymbol(cSingleWell.svgDoc, cSingleWell.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
}
}
#endregion
#region 比例条
if (curTrackDraw.sTrackType == TypeTrack.比例条.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn);
returnElemment = cSVGSectionTrackSymbol.gTrackRatioRect(cSingleWell.svgDoc, item.sID, item.top, item.bot, float.Parse(item.sText), fVScale, curTrackDraw.iTrackWidth, "blue");
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
}
}
#endregion
#region 地层道
if (curTrackDraw.sTrackType == TypeTrack.分层.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
itemDrawDataIntervalValue item = new itemDrawDataIntervalValue(xn);
if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackLayer.gTrackItemLayer(cSingleWell.svgDoc, item, fVScale, curTrackDraw.iTrackFontSize, curTrackDraw.iTrackWidth);
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
}
}
}
#endregion
#region 图片道
if (curTrackDraw.sTrackType == TypeTrack.图片道.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
itemDrawDataIntervalValue item = new itemDrawDataIntervalValue(xn);
returnElemment = cSVGSectionTrackImage.gTrackImage(cSingleWell.svgDoc, cSingleWell.svgDefs, sJH, item, fVScale, curTrackDraw.iTrackWidth);
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
}
}
#endregion
#region 岩性
if (curTrackDraw.sTrackType == TypeTrack.岩性层段.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
itemDrawDataIntervalValue item = new itemDrawDataIntervalValue(xn);
if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackLitho.gTrackLitho(cSingleWell.svgDoc, cSingleWell.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
}
}
}
#endregion
#region 测井解释，旋回,化石道
if (cProjectManager.ltStrTrackTypeIntervalProperty.IndexOf(curTrackDraw.sTrackType) >= 0)
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn); if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackJSJL.gTrackItemJSJL(cSingleWell.svgDoc, cSingleWell.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
if (curTrackDraw.sTrackType == TypeTrack.沉积旋回.ToString())
{
returnElemment = cSVGSectionTrackCycle.gTrackGeoCycle(cSingleWell.svgDoc, cSingleWell.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
}
if (curTrackDraw.sTrackType == TypeTrack.描述.ToString())
{
returnElemment = cSVGSectionTrackDes.gTrackItemFossil(cSingleWell.svgDoc, cSingleWell.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
}
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
}
}
}
}
#endregion
#region 曲线道
List <itemLogHeadInforDraw> ltItemLogHeadInforDraw = new List <itemLogHeadInforDraw>(); //记录绘制道头用，节省重新读取的时间
if (curTrackDraw.sTrackType == TypeTrack.曲线道.ToString())
{
cSVGSectionTrackLogCurveFill.listLogViewData4fill.Clear();
XmlNodeList xnList = el_Track.SelectNodes(".//Log");
int iLogNum = 0;
bool bGrid = false; //记录网格是否绘制过。
foreach (XmlElement xnLog in xnList)
{
iLogNum++;
itemLogHeadInforDraw curLogHead = new itemLogHeadInforDraw(xnLog);
ltItemLogHeadInforDraw.Add(curLogHead);
if (curLogHead.iIsLog > 0)
{
if (curLogHead.fLeftValue <= 0)
{
curLogHead.fLeftValue = 1;
cXmlBase.setSelectedNodeChildNodeValue(filePathTemplatOper, "", "leftValue", "1");
}
curLogHead.iLogGridGrade = cSVGSectionTrackLog.getNumGridGroupInLog(curLogHead.fLeftValue, curLogHead.fRightValue);
}
//曲线是否可见
if (curLogHead.iLogCurveVisible > 0)
{
trackDataListLog dlTrackDataListLog = cSVGSectionTrackLog.getLogSeriersFromLogFile(sJH, curLogHead.sLogName, dfDS1Show, dfDS2Show);
//画曲线
returnElemment = cSVGSectionTrackLog.gTrackLog(cSingleWell.svgDoc, curLogHead, curTrackDraw.iTrackWidth, dlTrackDataListLog.fListMD, dlTrackDataListLog.fListValue, fVScale);
cSingleWell.addgElement2BaseLayer(returnElemment, iListTrackWidth.Sum(), 0);
XmlNode nodeData = xnLog.SelectSingleNode("sData");
} //曲线可见
} //结束曲线循环
} //结束曲线if
#endregion 结束曲线道
#region 绘制测井图头,测井图信息很重要，图形加载数据要捕捉测井头的ID
if (curTrackDraw.sTrackType == TypeTrack.曲线道.ToString())
{
int iLogNum = 0;
foreach (itemLogHeadInforDraw curLogHead in ltItemLogHeadInforDraw)
{
iLogNum++;
if (curLogHead.iIsLog > 0)
{
if (curLogHead.fLeftValue <= 0)
{
curLogHead.fLeftValue = 1;
}
curLogHead.iLogGridGrade = cSVGSectionTrackLog.getNumGridGroupInLog(curLogHead.fLeftValue, curLogHead.fRightValue);
}
}
}
#endregion
//道宽List
iListTrackWidth.Add(curTrackDraw.iTrackWidth);
} //if 是否可见
} //结束Foreach图道循环绘制