private void on_GO(object sender, EventArgs e)
{
processingStatus.Text = "READY TO BEGIN? Click GO.";
Cursor.Current = Cursors.WaitCursor;
// perform edit checks --
processingStatus.Text = "Edit checking the data. Please wait.";
processingStatus.Refresh();
// calls edit check routines
string outputFileName;
// check for errors from FScruiser before running edit checks
// generate an error report
// June 2013
List <ErrorLogDO> fscList = Global.BL.getErrorMessages("E", "FScruiser").ToList();
if (fscList.Count > 0)
{
ErrorReport eRpt = new ErrorReport();
eRpt.fileName = fileName;
outputFileName = eRpt.PrintFScruiserErrors(fscList);
string outputMessage = "ERRORS FROM FSCRUISER FOUND!\nCorrect data and rerun\nOutput file is:" + outputFileName;
MessageBox.Show(outputMessage, "ERRORS", MessageBoxButtons.OK, MessageBoxIcon.Stop);
// request made to open error report in preview -- May 2015
PrintPreview pp = new PrintPreview();
pp.fileName = outputFileName;
pp.setupDialog();
pp.ShowDialog();
Environment.Exit(0);
} // endif report needed
// clear out error log table for just CruiseProcessing before performing checks
Global.BL.DeleteErrorMessages();
EditChecks eChecks = new EditChecks();
eChecks.fileName = fileName;
List <SaleDO> saleList = Global.BL.getSale().ToList();
List <SampleGroupDO> sgList = Global.BL.getSampleGroups().ToList();
List <StratumDO> sList = Global.BL.getStratum().ToList();
List <CountTreeDO> ctList = Global.BL.getCountTrees().ToList();
List <TreeDO> tList = Global.BL.getTrees().ToList();
int errors = eChecks.TableEditChecks(Global.BL.getSale(),
sList,
ctList,
tList,
sgList);
if (errors == -1)
{
// no measured trees detected in the cruise. critical errpor stops the program.
Close();
return;
} // endif
errors = eChecks.MethodChecks();
if (errors == -1)
{
// empty stratum detected and user wants to quit
Close();
return;
} // endif
// just check the ErrorLog table for entries
List <ErrorLogDO> errList = Global.BL.getErrorMessages("E", "CruiseProcessing").ToList();
if (errList.Count > 0)
{
ErrorReport er = new ErrorReport();
er.fileName = fileName;
outputFileName = er.PrintErrorReport(errList);
string outputMessage = "ERRORS FOUND!\nCorrect data and rerun\nOutput file is:" + outputFileName;
MessageBox.Show(outputMessage, "ERRORS", MessageBoxButtons.OK, MessageBoxIcon.Stop);
// request made to open error report in preview -- May 2015
PrintPreview pp = new PrintPreview();
pp.fileName = outputFileName;
pp.setupDialog();
pp.ShowDialog();
Environment.Exit(0);
} // endif report needed
// Show editCheck message -- edit checks complete
editCheck.Enabled = true;
// next show preparation of data
processingStatus.Text = "Preparing data for processing.";
processingStatus.Refresh();
// before making IDs, need to check for blank or null secondary products in sample groups
// if blank, default to 02 for every region but 6 where it will be 08 instead
// put a warning message in the error log table indicating the secondary product was set to a default
// June 2013
string currRegion = Global.BL.getRegion();
DefaultSecondaryProduct(currRegion);
CalculatedValues calcVal = new CalculatedValues();
// retrieve lists needed and sets up population IDs
calcVal.fileName = fileName;
//List<TreeCalculatedValuesDO> tcvList = Global.BL.getTreeCalculatedValues();
//List<TreeDefaultValueDO> tdvList = Global.BL.getTreeDefaults();
List <CuttingUnitDO> cuList = Global.BL.getCuttingUnits().ToList();
List <LCDDO> lcdList = Global.BL.getLCD().ToList();
List <POPDO> popList = Global.BL.getPOP().ToList();
List <PRODO> proList = Global.BL.getPRO().ToList();
List <PlotDO> pList = Global.BL.getPlots().ToList();
//List<VolumeEquationDO> vqList = Global.BL.getVolumeEquations();
calcVal.ClearCalculatedTables();
calcVal.MakePopulationIDs(sgList);
// now need some other tables to start summing values
List <PlotDO> justPlots;
// show preparation of data is complete
prepareCheck.Enabled = true;
// now loop through strata and show status message updating for each stratum
StringBuilder sb = new StringBuilder();
foreach (StratumDO sdo in sList)
{
CalculateTreeValues calcTreeVal = new CalculateTreeValues();
// update status message for next stratum
sb.Remove(0, sb.Length);
sb.Append("Calculating stratum ");
sb.Append(sdo.Code);
processingStatus.Text = sb.ToString();
processingStatus.Refresh();
// Sum counts and KPI for LCD table
justPlots = PlotMethods.GetStrata(pList, sdo.Code).ToList();
// need cut and leave trees for this
//List<LCDDO> justCurrentLCD = LCDmethods.GetStratum(lcdList, sdo.Code);
calcVal.SumTreeCountsLCD(sdo.Code, ctList, justPlots, sdo.Method, lcdList);
// Sum counts and KPI for POP table
// List<POPDO> justCurrentPOP = POPmethods.GetStratumData(popList, sdo.Code, "");
calcVal.SumTreeCountsPOP(sdo.Code, ctList, justPlots, sdo.Method, popList);
// Sum counts and KPI for PRO table
// List<PRODO> justCurrentPRO = Global.BL.getPRO(sdo.Code);
calcVal.SumTreeCountsPRO(sdo.Code, (long)sdo.Stratum_CN, tList, cuList, ctList, sgList, justPlots, proList, sdo.Method);
// Calculate expansion factor
calcVal.CalcExpFac(sdo, justPlots, popList);
// Calculate volumes
//calcTreeVal.fileName = fileName;
calcTreeVal.ProcessTrees(saleList, tList, Global.BL.getVolumeEquations(), sdo.Code, sdo.Method, (long)sdo.Stratum_CN);
// Update 3P tally
//List<TreeDO> justCurrentStratum = Global.BL.getTreeStratum((long)sdo.Stratum_CN);
if (sdo.Method == "3P")
{
Update3Ptally(ctList, sdo.Code, lcdList);
} // endif method is 3P
// Update expansion factors for methods 3PPNT, F3P, and P3P
if (sdo.Method == "3PPNT" || sdo.Method == "F3P" || sdo.Method == "P3P")
{
//List<TreeCalculatedValuesDO> tcvList = Global.BL.getTreeCalculatedValues((int)sdo.Stratum_CN);
UpdateExpansionFactors(Global.BL.getTreeCalculatedValues(), (long)sdo.Stratum_CN);
// Save update
} // endif on method
// Sum data for the LCD, POP and PRO table
SumAll sall = new SumAll();
sall.fileName = fileName;
sall.SumAllValues(sdo.Code, sdo.Method, (long)sdo.Stratum_CN, sList, pList, lcdList,
popList, proList);
Global.BL.SavePOP(popList);
Global.BL.SavePRO(proList);
Global.BL.SaveLCD(lcdList);
// Update STR tally after expansion factors are summed
if (sdo.Method == "STR")
{
UpdateSTRtally(fileName, sdo.Code, ctList, lcdList);
} // endif method is STR
} // end foreach stratum
// show volume calculation is finished
volumeCheck.Enabled = true;
processingStatus.Text = "Processing is DONE";
processingStatus.Refresh();
System.Threading.Thread.Sleep(5000);
Close();
return;
} // end on_GO
private void on_GO(object sender, EventArgs e)
{
processingStatus.Text = "READY TO BEGIN? Click GO.";
Cursor.Current = Cursors.WaitCursor;
// perform edit checks --
processingStatus.Text = "Edit checking the data. Please wait.";
processingStatus.Refresh();
// calls edit check routines
/* string outputFileName;
* // check for errors from FScruiser before running edit checks
* // generate an error report
* // June 2013
* List<ErrorLogDO> fscList = bslyr.getErrorMessages("E", "FScruiser");
* if (fscList.Count > 0)
* {
* ErrorReport eRpt = new ErrorReport();
* eRpt.fileName = fileName;
* eRpt.bslyr.fileName = bslyr.fileName;
* eRpt.bslyr.DAL = bslyr.DAL;
* outputFileName = eRpt.PrintFScruiserErrors(fscList);
* string outputMessage = "ERRORS FROM FSCRUISER FOUND!\nCorrect data and rerun\nOutput file is:" + outputFileName;
* MessageBox.Show(outputMessage, "ERRORS", MessageBoxButtons.OK, MessageBoxIcon.Stop);
* // request made to open error report in preview -- May 2015
* PrintPreview pp = new PrintPreview();
* pp.fileName = outputFileName;
* pp.setupDialog();
* pp.ShowDialog();
* Environment.Exit(0);
* } // endif report needed
*
* // clear out error log table for just CruiseProcessing before performing checks
* bslyr.DeleteErrorMessages();
*
* EditChecks eChecks = new EditChecks();
* eChecks.fileName = fileName;
* eChecks.bslyr.fileName = bslyr.fileName;
* eChecks.bslyr.DAL = bslyr.DAL;
*
* int errors = eChecks.TableEditChecks();
* if (errors == -1)
* {
* // no measured trees detected in the cruise. critical errpor stops the program.
* Close();
* return;
* } // endif
* errors = eChecks.MethodChecks();
* if (errors == -1)
* {
* // empty stratum detected and user wants to quit
* Close();
* return;
* } // endif
* // just check the ErrorLog table for entries
* List<ErrorLogDO> errList = bslyr.getErrorMessages("E", "CruiseProcessing");
* if (errList.Count > 0)
* {
* ErrorReport er = new ErrorReport();
* er.fileName = fileName;
* er.bslyr.fileName = fileName;
* er.bslyr.DAL = bslyr.DAL;
* outputFileName = er.PrintErrorReport(errList);
* string outputMessage = "ERRORS FOUND!\nCorrect data and rerun\nOutput file is:" + outputFileName;
* MessageBox.Show(outputMessage, "ERRORS", MessageBoxButtons.OK, MessageBoxIcon.Stop);
* // request made to open error report in preview -- May 2015
* PrintPreview pp = new PrintPreview();
* pp.fileName = outputFileName;
* pp.setupDialog();
* pp.ShowDialog();
* Environment.Exit(0);
* } // endif report needed
* moved to EditCheck routine*/
// Show editCheck message -- edit checks complete
EditChecks eChecks = new EditChecks();
eChecks.fileName = fileName;
eChecks.DAL = DAL;
int err = eChecks.CheckErrors();
if (err < 0)
{
Close();
return;
}
editCheck.Enabled = true;
// next show preparation of data
processingStatus.Text = "Preparing data for processing.";
processingStatus.Refresh();
// before making IDs, need to check for blank or null secondary products in sample groups
// if blank, default to 02 for every region but 6 where it will be 08 instead
// put a warning message in the error log table indicating the secondary product was set to a default
// June 2013
List <SaleDO> saleList = new List <SaleDO>();
saleList = DAL.From <SaleDO>().Read().ToList();
string currRegion = saleList[0].Region;
//string currRegion = bslyr.getRegion();
DefaultSecondaryProduct(currRegion);
CalculateTreeValues calcTreeVal = new CalculateTreeValues();
CalculatedValues calcVal = new CalculatedValues();
// retrieve lists needed and sets up population IDs
calcVal.fileName = fileName;
calcVal.DAL = DAL;
// List<SampleGroupDO> sgList = bslyr.getSampleGroups();
// List<TreeDefaultValueDO> tdvList = bslyr.getTreeDefaults();
// List<CountTreeDO> ctList = bslyr.getCountTrees();
// List<PlotDO> pList = bslyr.getPlots();
// calcVal.ClearCalculatedTables();
// calcVal.MakePopulationIDs(sgList, tdvList);
calcVal.CalcValues();
CPbusinessLayer bslyr = new CPbusinessLayer();
bslyr.DAL = DAL;
// now need some other tables to start summing values
List <LCDDO> lcdList = bslyr.getLCD();
List <POPDO> popList = bslyr.getPOP();
List <PRODO> proList = bslyr.getPRO();
List <StratumDO> sList = bslyr.getStratum();
List <SampleGroupDO> sgList = bslyr.getSampleGroups();
List <TreeDefaultValueDO> tdvList = bslyr.getTreeDefaults();
List <CountTreeDO> ctList = bslyr.getCountTrees();
List <PlotDO> pList = bslyr.getPlots();
List <TreeDO> tList = bslyr.getTrees();
calcTreeVal.fileName = fileName;
calcTreeVal.bslyr.fileName = fileName;
calcTreeVal.bslyr.DAL = bslyr.DAL;
// show preparation of data is complete
prepareCheck.Enabled = true;
// now loop through strata and show status message updating for each stratum
StringBuilder sb = new StringBuilder();
foreach (StratumDO sdo in sList)
{
// update status message for next stratum
sb.Clear();
sb.Append("Calculating stratum ");
sb.Append(sdo.Code);
processingStatus.Text = sb.ToString();
processingStatus.Refresh();
// Sum counts and KPI for LCD table
List <PlotDO> justPlots = PlotMethods.GetStrata(pList, sdo.Code);
// need cut and leave trees for this
List <LCDDO> justCurrentLCD = LCDmethods.GetStratum(lcdList, sdo.Code);
calcVal.SumTreeCountsLCD(sdo.Code, ctList, justPlots, justCurrentLCD, sdo.Method, lcdList);
// Sum counts and KPI for POP table
List <POPDO> justCurrentPOP = POPmethods.GetStratumData(popList, sdo.Code, "");
calcVal.SumTreeCountsPOP(sdo.Code, ctList, justPlots, justCurrentPOP, sdo.Method, popList);
// Sum counts and KPI for PRO table
List <PRODO> justCurrentPRO = PROmethods.GetCutTrees(proList, sdo.Code, "", "", 0);
calcVal.SumTreeCountsPRO(sdo.Code, ctList, justPlots, justCurrentPRO, sdo.Method, proList);
// Calculate expansion factor
calcVal.CalcExpFac(sdo, justPlots, justCurrentPOP);
// Calculate volumes
calcTreeVal.ProcessTrees(sdo.Code, sdo.Method, (long)sdo.Stratum_CN);
// Update 3P tally
if (sdo.Method == "3P")
{
List <LCDDO> LCDstratum = LCDmethods.GetStratumGroupedBy(fileName, sdo.Code, bslyr);
Update3Ptally(fileName, ctList, justCurrentLCD, tList, LCDstratum);
// Save
bslyr.SaveLCD(justCurrentLCD);
} // endif method is 3P
// Update expansion factors for methods 3PPNT, F3P, and P3P
if (sdo.Method == "3PPNT" || sdo.Method == "F3P" || sdo.Method == "P3P")
{
List <TreeDO> justCurrentStratum = tList.FindAll(
delegate(TreeDO td)
{
return(td.Stratum.Code == sdo.Code);
});
List <TreeCalculatedValuesDO> tcvList = bslyr.getTreeCalculatedValues((int)sdo.Stratum_CN);
UpdateExpansionFactors(justCurrentStratum, tcvList);
// Save update
bslyr.SaveTrees(justCurrentStratum);
} // endif on method
// Sum data for the LCD, POP and PRO table
SumAll Sml = new SumAll();
Sml.fileName = fileName;
Sml.bslyr.fileName = bslyr.fileName;
Sml.bslyr.DAL = bslyr.DAL;
Sml.SumAllValues(sdo.Code, sdo.Method, (int)sdo.Stratum_CN, sList, pList, justCurrentLCD,
justCurrentPOP, justCurrentPRO);
// Update STR tally after expansion factors are summed
if (sdo.Method == "STR")
{
UpdateSTRtally(fileName, sdo.Code, justCurrentLCD, ctList, lcdList);
// save
bslyr.SaveLCD(lcdList);
} // endif method is STR
} // end foreach stratum
// show volume calculation is finished
volumeCheck.Enabled = true;
processingStatus.Text = "Processing is DONE";
processingStatus.Refresh();
System.Threading.Thread.Sleep(5000);
Cursor.Current = this.Cursor;
Close();
return;
} // end on_GO