/* Sorts an array using Selection sort algorithm.
* Prints updates if printUpdates is true.
* Doesn't redundantly swap the last remaining element with itself.
* Time complexity: Worst = n^2, Best = n^2, Average = n^2.
*/
public static int[] Sort(int[] array, bool printUpdates)
{
ulong comparisons = 0;
ulong swaps = 0;
int n = array.Length;
// The leftmost element will be skipped at each successive loop, since we know it's now sorted.
// Also, the condition is ( < n-1 ) instead of ( < n ) to avoid swapping the last element with itself.
for (int firstUnsortedIndex = 0; firstUnsortedIndex < n - 1; firstUnsortedIndex++)
{
if (printUpdates)
{
Console.WriteLine("Go through unsorted section to find minimum:");
}
// Assume the first unsorted element is the smallest, store its index
int min = array[firstUnsortedIndex];
int indexOfMin = firstUnsortedIndex;
// Iterate through the unsorted array and find the smallest element
for (int currentIndex = firstUnsortedIndex + 1; currentIndex < n; currentIndex++)
{
// Since the next line will compare elements, add 1 to comparisons
comparisons++;
if (printUpdates)
{
Console.WriteLine("^ Compare " + min.ToString().PadLeft(2) +
" with " + array[currentIndex].ToString().PadLeft(2));
}
if (array[currentIndex] < min)
{
min = array[currentIndex];
indexOfMin = currentIndex;
}
}
// Swap the smallest element with the first unsorted element. Count 1 more swap.
ArrayOperations.Swap(array, indexOfMin, firstUnsortedIndex);
swaps++;
// Since a swap was made, print array in current state and say what was swapped
if (printUpdates)
{
Console.WriteLine("Minimum = {0}, swap with first unsorted element:", min);
string message = "swapped " + array[indexOfMin].ToString().PadLeft(2) +
" with " + array[firstUnsortedIndex].ToString().PadLeft(2);
ArrayOperations.Print(array, message);
}
}
// Print number of comparisons and swaps that were performed
if (printUpdates)
{
Console.WriteLine("Since there's only one element left, it must be in the right place and we're done!");
Console.WriteLine("\nNumber of comparisons: " + comparisons +
"\nNumber of swaps: " + swaps);
}
CountAndDisplay.totalComparisonsSelection += comparisons;
CountAndDisplay.totalSwapsSelection += swaps;
return(array);
}
/* Calls all sorting algorithms and prints additional information to specify which sort is which */
private static void CallAllSorts(int[] array, bool printUpdates)
{
// Copy each array (since they're arrays of ints, shallow copy is enough)
int[] array1 = (int[])array.Clone();
int[] array2 = (int[])array.Clone();
int[] array3 = (int[])array.Clone();
int[] array4 = (int[])array.Clone();
if (printUpdates)
{
Console.WriteLine("\nBubble sort:" +
"\n************");
ArrayOperations.Print(array, "initial array");
}
Bubble.Sort(array, printUpdates);
if (printUpdates)
{
Console.WriteLine("\nSelection sort:" +
"\n***************");
ArrayOperations.Print(array1, "initial array");
}
Selection.Sort(array1, printUpdates);
if (printUpdates)
{
Console.WriteLine("\nInsertion sort:" +
"\n***************");
ArrayOperations.Print(array2, "initial array");
}
Insertion.Sort(array2, printUpdates);
if (printUpdates)
{
Console.WriteLine("\nQuick sort:" +
"\n***********");
ArrayOperations.Print(array3, "initial array");
}
Quick.Sort(array3, 0, array3.Length - 1, printUpdates);
if (printUpdates)
{
Console.WriteLine("\nMerge sort:" +
"\n***********");
ArrayOperations.Print(array4, "initial array");
}
Merge.Sort(array4, printUpdates);
if (printUpdates)
{
Console.WriteLine();
}
}
public static void Init(string sortingAlgorithm, string orderOfInitialArray, ulong numberOfSorts, int lengthOfArray, bool printUpdates)
{
/* Initialise specified number of arrays of ints
* Pass each one to Bubble||Selection||Insertion||Quick sort
* Count total number of comparisons/swaps/shuffles/insertions as required
*/
for (int i = 0; i < (int)numberOfSorts; i++)
{
if (numberOfSorts > 1 && printUpdates == true)
{
Console.WriteLine("\n\nRound {0}:\n", (i + 1));
}
// Create array
int[] array = ArrayOperations.Make(lengthOfArray, orderOfInitialArray);
if (printUpdates && sortingAlgorithm != A)
{
ArrayOperations.Print(array, "initial array");
}
switch (sortingAlgorithm)
{
case B:
Bubble.Sort(array, printUpdates);
break;
case S:
Selection.Sort(array, printUpdates);
break;
case I:
Insertion.Sort(array, printUpdates);
break;
case Q:
Quick.Sort(array, 0, array.Length - 1, printUpdates);
break;
case M:
Merge.Sort(array, printUpdates);
break;
default:
CallAllSorts(array, printUpdates);
break;
}
}
}
// Merges two sorted arrays into one sorted array
public static void MergeArrays(int[] array, int[] leftArray, int[] rightArray, bool printUpdates)
{
ulong comparisons = 0;
ulong swaps = 0;
int leftCount = leftArray.Length;
int rightCount = rightArray.Length;
int l = 0; // index of left sub-array
int r = 0; // index of right sub-array
int m = 0; // index of merged array
// Copy the next value in left and right sub-arrays to the main array
while (l < leftCount && r < rightCount)
{
comparisons++;
swaps++;
if (leftArray[l] < rightArray[r])
{
array[m++] = leftArray[l++];
}
else
{
array[m++] = rightArray[r++];
}
}
// If end of right subarray reached first, copy remaining elements from left subarray
while (l < leftCount)
{
swaps++;
array[m++] = leftArray[l++];
}
// If end of left subarray reached first, copy remaining elements from right subarray
while (r < rightCount)
{
swaps++;
array[m++] = rightArray[r++];
}
if (printUpdates)
{
ArrayOperations.Print(array, "<- After a completed Merge of two sub-arrays");
}
CountAndDisplay.totalComparisonsMerge += comparisons;
CountAndDisplay.totalSwapsMerge += swaps;
}
/* Sets pivot to some element in the given array, and partitionIndex to the first.
* Iterates through each element and compares against the pivot.
* If it's less than or equal to the pivot, swap it with partitionIndex++.
* If it's greater than pivot, leave it alone.
* Finally, swap the pivot with the partitionIndex.
* Now, all elements <= pivot are on its left, and elements > pivot are on the right.
*/
public static int Partition(int[] array, int start, int end, bool printUpdates)
{
ulong comparisons = 0;
ulong swaps = 0;
// Set pivot (one of three methods, see GetPivot method)
int pivotIndex = GetPivot(array, start, end);
int pivot = array[pivotIndex];
// Set partitionIndex to start
int partitionIndex = start;
if (printUpdates)
{
Console.WriteLine("Pivot is {0}, move < elements to left and >= to right", pivot);
}
// Iterate from start to end - 1 (because end is always the pivot)
for (int i = start; i < end; i++)
{
// Compare each element to the pivot
comparisons++;
if (array[i] < pivot)
{
// If it's < pivot, swap to left of partition
ArrayOperations.Swap(array, i, partitionIndex);
partitionIndex++;
swaps++;
}
}
// Move the pivot to the partition. Now, elements left are <= pivot, right are > pivot
ArrayOperations.Swap(array, end, partitionIndex);
swaps++;
CountAndDisplay.totalComparisonsQuick += comparisons;
CountAndDisplay.totalSwapsQuick += swaps;
if (printUpdates)
{
string message = "Pivot was " + pivot.ToString().PadLeft(2) + ", moved to index " + partitionIndex.ToString().PadLeft(2);
ArrayOperations.Print(array, message);
}
return(partitionIndex);
}
/* Sorts an array using Bubble sort algorithm.
* Prints updates if printUpdates is true.
* Optimised: will only loop once through an array once after it's sorted,
* and distinguishes between 'sorted' and 'unsorted' parts.
* Time complexity: Worst = n^2, Best = n, Average = n^2.
*/
public static int[] Sort(int[] array, bool printUpdates)
{
ulong comparisons = 0;
ulong swaps = 0;
// Get (length - 1) because we compare with (j + 1)
int n = array.Length - 1;
bool swapped = false;
/* Loop through the array, checking that each element is smaller than the next.
* If not, swap those two elements and mark 'swapped' to true.
* Stop looping when the whole array has been checked without making a swap.
*/
do
{
swapped = false;
for (int j = 0; j < n; j++)
{
// Since the next line will compare elements, add 1 to comparisons
comparisons++;
if (printUpdates)
{
Console.Write("^ Compare " + array[j].ToString().PadLeft(2) +
" with " + array[j + 1].ToString().PadLeft(2));
}
if ((array[j] > array[j + 1]))
{
// Swap them, set 'swapped' to true, count 1 more swap
ArrayOperations.Swap(array, j, j + 1);
swapped = true;
swaps++;
// Since a swap was made, print array in current state and say what was swapped
if (printUpdates)
{
Console.WriteLine(", it's bigger so swap:");
string message = "swapped " + array[j + 1].ToString().PadLeft(2) +
" with " + array[j].ToString().PadLeft(2);
ArrayOperations.Print(array, message);
}
}
else if (printUpdates)
{
Console.WriteLine(", it's not bigger so don't swap");
}
}
// After each loop, we know the biggest element must be sorted
// So, it can be ignored on the next pass
n--;
} while (swapped);
// Print number of comparisons and swaps that were performed
if (printUpdates)
{
Console.WriteLine("Since no swaps were made this pass, we're done!");
Console.WriteLine("\nNumber of comparisons: " + comparisons +
"\nNumber of swaps: " + swaps);
}
CountAndDisplay.totalComparisonsBubble += comparisons;
CountAndDisplay.totalSwapsBubble += swaps;
return(array);
}
/* Sorts an array using Insertion sort algorithm.
* Prints updates if printUpdates is true.
* At the end, prints a summary of the number of comparisons, shuffles, and insertions.
* Time complexity: Worst = n^2, Best = n, Average = n^2.
*/
public static int[] Sort(int[] array, bool printUpdates)
{
// Since elements aren't directly swapped, it doesn't make sense to count swaps like the other algorithms.
// Instead, we count shuffles (when an element moves up one index)
// and insertions (where the currentElement is inserted into its correct index for that pass)
ulong comparisons = 0,
shuffles = 0,
insertions = 0;
int n = array.Length;
// We begin at index 1 since we will compare with the element before it
for (int i = 1; i < n; i++)
{
// Store the current element's value and index
int currentElement = array[i],
j = i;
// The next line will compare two elements, so add 1 to comparisons
comparisons++;
if (printUpdates && j > 0)
{
Console.Write("^ Compare " + currentElement.ToString().PadLeft(2) +
" with " + array[j - 1].ToString().PadLeft(2));
}
bool endReached = false;
// Shuffle the required number of previous elements, to 'make room' for the currentElement
while (j > 0 && array[j - 1] > currentElement)
{
array[j] = array[j - 1];
j--;
// An element was just moved by one index, so add 1 to shuffles
shuffles++;
if (printUpdates)
{
Console.WriteLine(", {0} is bigger so we shuffle it one place up to index {1}", array[j], j);
}
// The while condition will now compare two elements again (unless j is now 0), so add 1 to comparisons
if (j != 0)
{
comparisons++;
if (printUpdates)
{
Console.Write("^ Compare " + currentElement.ToString().PadLeft(2) +
" with " + array[j - 1].ToString().PadLeft(2));
}
}
else if (printUpdates)
{
endReached = true;
Console.WriteLine("We've reached the first index so insert {0} here:", currentElement.ToString().PadLeft(2));
}
}
if (printUpdates && !endReached)
{
Console.WriteLine(", it's not smaller so we insert {0} here:", currentElement.ToString().PadLeft(2));
}
// Insert the currentElement in its correct index for this pass, and add 1 to insertions
array[j] = currentElement;
insertions++;
// Since an insertion was made, print array in current state and say what was inserted
if (printUpdates)
{
string message = "inserted " + currentElement.ToString().PadLeft(2) +
" to index " + j.ToString().PadLeft(2);
ArrayOperations.Print(array, message);
}
}
// Print number of comparisons, shuffles and insertions that were performed
if (printUpdates)
{
Console.WriteLine("Since that was the last element, we're done!");
Console.WriteLine("\nNumber of comparisons: " + comparisons +
"\nNumber of shuffles: " + shuffles +
"\nNumber of insertions: " + insertions);
}
CountAndDisplay.totalComparisonsInsertion += comparisons;
CountAndDisplay.totalShuffles += shuffles;
CountAndDisplay.totalInsertions += insertions;
return(array);
}