private void btnTuneBinary_ItemClick(object sender, ItemClickEventArgs e)
{
if (ValidateFile())
{
// read tuned marker to see if binary has been tuned before
T7FileHeader fh = new T7FileHeader();
fh.init(m_currentfile, m_appSettings.AutoFixFooter);
PartNumberConverter pnc = new PartNumberConverter();
ECUInformation ecuinfo = pnc.GetECUInfo(fh.getPartNumber().Trim(), "");
//<GS-05102010> Need to validate the type of binary file loaded (which engine type and turbo type, A/M transmission)
// and base the initially targeted torque and power figures on that
frmTuningWizard tunWiz = new frmTuningWizard();
string msg = "Partnumber not recognized, tuning will continue anyway, please verify settings afterwards";
//msg += Environment.NewLine + " desired airmass " + maxairmass.ToString() + " mg/c and peak torque " + peaktorque.ToString() + " Nm";
if (ecuinfo.Valid)
{
msg = "Partnumber " + fh.getPartNumber() + ", carmodel " + ecuinfo.Carmodel.ToString() + ", engine " + ecuinfo.Enginetype.ToString();
//msg += Environment.NewLine + " desired airmass " + maxairmass.ToString() + " mg/c and peak torque " + peaktorque.ToString() + " Nm";
}
tunWiz.ExtraInfo = msg;
if (ecuinfo.Stage1torque != 0)
{
tunWiz.PeakTorque = Convert.ToInt32(ecuinfo.Stage1torque);
}
if (tunWiz.ShowDialog() == DialogResult.OK)
{
int desiredHP = tunWiz.DesiredHP;
bool carRunsE85 = tunWiz.CarRunsE85;
// convert HP to torque and airmass
//int torque = PowerToTorque(desiredHP, 6000);
//int peaktorque = (110 * torque) / 100;
int peaktorque = tunWiz.PeakTorque;
int maxairmass = TorqueToAirmass(peaktorque, carRunsE85);
// give user a warning if airmass/c > 1300 mg/c
if (maxairmass > 1300)
{
frmInfoBox info = new frmInfoBox("Your maximum requested airmass exceeds 1300 mg/c [" + maxairmass.ToString() + " mg/c]. Please make sure all your other maps will support this airflow!");
}
TuneToStageNew(1, maxairmass, peaktorque, desiredHP, ecuinfo.Enginetype, carRunsE85);
TuningReport tuningrep = new TuningReport();
tuningrep.DataSource = resumeTuning;
tuningrep.CreateReport();
tuningrep.ShowPreview(defaultLookAndFeel1.LookAndFeel);
}
// start window to ask user for desired horses (depending on E85 usage?)
/*frmTuneBinary frmTune = new frmTuneBinary();
if (ecuinfo.Stage1torque != 0)
{
frmTune.PeakTorque = Convert.ToInt32(ecuinfo.Stage1torque);
}
if (frmTune.ShowDialog() == DialogResult.OK)
{
int desiredHP = frmTune.DesiredHP;
bool carRunsE85 = frmTune.CarRunsE85;
// convert HP to torque and airmass
//int torque = PowerToTorque(desiredHP, 6000);
//int peaktorque = (110 * torque) / 100;
int peaktorque = frmTune.PeakTorque;
int maxairmass = TorqueToAirmass(peaktorque, carRunsE85);
// give user a warning if airmass/c > 1300 mg/c
if (maxairmass > 1300)
{
MessageBox.Show("Your maximum requested airmass exceeds 1300 mg/c [" + maxairmass.ToString() + " mg/c]. Please make sure all your other maps will support this airflow!", "Warning!", MessageBoxButtons.OK);
}
string msg = "Partnumber not recognized, tuning will continue anyway, please verify settings afterwards";
msg += Environment.NewLine + " desired airmass " + maxairmass.ToString() + " mg/c and peak torque " + peaktorque.ToString() + " Nm";
if (ecuinfo.Valid)
{
msg = "Partnumber " + fh.getPartNumber() + ", carmodel " + ecuinfo.Carmodel.ToString() + ", engine " + ecuinfo.Enginetype.ToString();
msg += Environment.NewLine + " desired airmass " + maxairmass.ToString() + " mg/c and peak torque " + peaktorque.ToString() + " Nm";
}
PSTaskDialog.cTaskDialog.ForceEmulationMode = false;
PSTaskDialog.cTaskDialog.EmulatedFormWidth = 600;
PSTaskDialog.cTaskDialog.UseToolWindowOnXP = false;
PSTaskDialog.cTaskDialog.VerificationChecked = true;
PSTaskDialog.cTaskDialog.ShowTaskDialogBox("Tune me up™ wizard", "This wizard will tune your binary.", "Several maps will be altered" + Environment.NewLine + msg, "Happy driving!!!\nDilemma © 2009", "The author does not take responsibility for any damage done to your car or other objects in any form!", "Show me a summary after tuning", "", "Yes, tune me up!|No thanks!", eTaskDialogButtons.None, eSysIcons.Information, eSysIcons.Warning);
switch (PSTaskDialog.cTaskDialog.CommandButtonResult)
{
case 0:
// tune to stage x
// must use fixed maps, scaled to be good for the current airmass (e.g. pedalrequest map)
TuneToStageNew(1, maxairmass, peaktorque, desiredHP, ecuinfo.Enginetype, carRunsE85);
break;
case 1:
// cancel
break;
}
if (PSTaskDialog.cTaskDialog.VerificationChecked && PSTaskDialog.cTaskDialog.CommandButtonResult != 1)
{
TuningReport tuningrep = new TuningReport();
tuningrep.DataSource = resumeTuning;
tuningrep.CreateReport();
tuningrep.ShowPreview(defaultLookAndFeel1.LookAndFeel);
}
}*/
}
}
private void Actions_TransferMaps_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
// ask for another bin file
if (m_currentfile != string.Empty)
{
PSTaskDialog.cTaskDialog.ForceEmulationMode = false;
PSTaskDialog.cTaskDialog.EmulatedFormWidth = 600;
PSTaskDialog.cTaskDialog.UseToolWindowOnXP = false;
PSTaskDialog.cTaskDialog.VerificationChecked = true;
PSTaskDialog.cTaskDialog.ShowTaskDialogBox("Transfer maps to different binary wizard", "This wizard assists you in transferring map contents from the current file to another binary.", "Make sure engine types and such are equal for both binaries!", "Happy driving!!!\nDilemma © 2008", "The author does not take responsibility for any damage done to your car or other objects in any form!", "Show me a summary after transferring data.", "", "Yes, let me select the target binary|No thanks!", eTaskDialogButtons.None, eSysIcons.Information, eSysIcons.Warning);
switch (PSTaskDialog.cTaskDialog.CommandButtonResult)
{
case 0:
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
TransferMapsToNewBinary(openFileDialog1.FileName);
}
else
{
return;
}
break;
case 1:
// cancel
break;
}
if (PSTaskDialog.cTaskDialog.VerificationChecked && PSTaskDialog.cTaskDialog.CommandButtonResult != 1)
{
TuningReport tuningrep = new TuningReport();
tuningrep.ReportTitle = "Data transfer report";
tuningrep.DataSource = resumeTuning;
tuningrep.CreateReport();
tuningrep.ShowPreview(defaultLookAndFeel1.LookAndFeel);
}
}
}
