/// <summary>
        /// 申领模具
        /// </summary>
        /// <param name="moldUseType">模具使用类型</param>
        /// <param name="moldNR">模具号</param>
        /// <param name="applicantNR">申请员工工号</param>
        /// <param name="operatorNR">操作员工工号</param>
        /// <param name="workstationNR">操作台号</param>
        /// <returns>申请信息</returns>
        public Message ApplyMold(MoldUseType moldUseType, string moldNR, string applicantNR, string operatorNR, string workstationNR)
        {
            try
            {
                using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
                {
                    IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
                    IMoldRepository moldRep = new MoldRepository(unitwork);
                    Mold mold = moldRep.GetById(moldNR);
                    // check mold is available for apply
                    if (mold.State == MoldStateType.NotReturned)
                        return new Message() { MsgType = MsgType.Warn, Content = "模具处于不可借状态!" };

                    // check workstaition reach the max mold apply number
                    if (workstationRep.OverAppliedMold(workstationNR) == false && Settings.Default.AllowOverApply == false)
                        return new Message() { MsgType = MsgType.Warn, Content = "申领已到达上限!" };

                    IPositionRepository positionRep = new PositionRepository(unitwork);
                    Position position = positionRep.GetByFacilictyNR(moldNR);

                    //set value of storage record
                    IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
                    StorageRecord storageRecord = new StorageRecord();
                    storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                    storageRecord.PositionId = position.PositionID;
                    storageRecord.Source = position.PositionNR;
                    storageRecord.Destination = workstationNR;
                    storageRecord.OperatorId = operatorNR;
                    storageRecord.ApplicantId = applicantNR;
                    storageRecord.Quantity = 1;
                    storageRecord.Date = DateTime.Now;
                    storageRecord.TargetNR = moldNR;
                    storageRecord.RecordType = (StorageRecordType)moldUseType;

                    // add new storage record
                    recordRep.Add(storageRecord);

                    // update mold last apply storage record nr
                    IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
                    MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
                    lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;

                    // update mold state
                    mold = moldRep.GetById(storageRecord.TargetNR);
                    mold.State = MoldStateType.NotReturned;

                    // update the workstation current mold count
                    Workstation workstation = workstationRep.GetById(storageRecord.Destination);
                    workstation.CurrentMoldCount++;

                    unitwork.Submit();
                    return new Message() { MsgType = MsgType.OK, Content = "申领成功" };
                }
            }
            catch (Exception ex)
            {
                LogUtil.log.Error(ex.ToString());
                return new Message() { MsgType = MsgType.Error, Content = "请核实所填数据的准确性" };
            }
        }
 partial void DeleteStorageRecord(StorageRecord instance);
 partial void UpdateStorageRecord(StorageRecord instance);
 partial void InsertStorageRecord(StorageRecord instance);
 /// <summary>
 /// 新建库存记录
 /// </summary>
 /// <param name="storageRecord">库存记录</param>
 public void Add(StorageRecord storageRecord)
 {
     context.StorageRecord.InsertOnSubmit(storageRecord);
 }
        /// <summary>
        /// 将模具从缓冲区移到库位
        /// </summary>
        /// <param name="moldNR">模具号</param>
        /// <param name="operatorNR">操作员工号</param>
        /// <param name="remark">备注</param>
        /// <returns>操作信息</returns>
        public Message ReturnMoldInPosition(string moldNR, string operatorNR,string remark)
        {
            try
            {
                using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
                {
                    IMoldRepository moldRep = new MoldRepository(unitwork);
                    Mold mold = moldRep.GetById(moldNR);

                    if (mold.State == MoldStateType.NotReturned)
                        return new Message() { MsgType = MsgType.Warn, Content = "模具还未归还,请归还后再入库!" };

                    string currentPosi = moldRep.GetMoldCurrPosiByMoldNR(moldNR);

                    if(!currentPosi.Equals(GetPartPoolPosiNr()))
                        return new Message() { MsgType = MsgType.Warn, Content = "模具已经入库!" };
                    StorageRecord storageRecord = new StorageRecord();

                    //set value of storage record

                    IPositionRepository positionRep = new PositionRepository(unitwork);
                    Position position = positionRep.GetByFacilictyNR(moldNR);
                    storageRecord.PositionId = position.PositionID;
                    storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                    storageRecord.Source = currentPosi;
                    storageRecord.Destination = position.PositionNR;
                    storageRecord.OperatorId =operatorNR==null?string.Empty: operatorNR.ToString();
                    storageRecord.Date = DateTime.Now;
                    storageRecord.Quantity = 1;
                    storageRecord.TargetNR = moldNR;
                    storageRecord.Remark = remark==null?string.Empty:remark.ToString();
                    storageRecord.RecordType = StorageRecordType.MoveStore;

                    // add new storage record
                    IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
                    recordRep.Add(storageRecord);

                    // update mold last apply storage record nr
                    IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
                    MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
                    lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
                    unitwork.Submit();
                    return new Message() { MsgType = MsgType.OK, Content = "入库成功" };
                }
            }
            catch (Exception ex)
            {
                LogUtil.log.Error(ex.ToString());
                return new Message() { MsgType = MsgType.Error, Content = ex.Message };
            }
        }
        /// <summary>
        /// 归还模具
        /// </summary>
        /// <param name="moldNR">模具号</param>
        /// <param name="applicantNR">申请员工工号</param>
        /// <param name="operatorNR">操作员工工号</param>
        /// <param name="remark">备注</param>
        /// <param name="moldState">模具状态</param>
        /// <returns>归还信息</returns>
        public Message ReturnMold(string moldNR, string applicantNR, string operatorNR, string remark, MoldReturnStateType moldState)
        {
            try
            {
                using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
                {
                    IMoldRepository moldRep = new MoldRepository(unitwork);
                    Mold mold = moldRep.GetById(moldNR);

                    if (mold.State != MoldStateType.NotReturned)
                        return new Message() {MsgType= MsgType.Warn, Content = "模具已归还!" };

                    StorageRecord storageRecord = new StorageRecord();

                    //set value of storage record
                    IPositionRepository positionRep = new PositionRepository(unitwork);
                    //Position position = positionRep.GetByFacilictyNR(moldNR);
                    Position position = positionRep.GetPartPoolPosition(Settings.Default.MoldPoolPosiNr);
                    storageRecord.PositionId = position.PositionID;
                    storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                    storageRecord.Source = moldRep.GetMoldCurrPosiByMoldNR(moldNR);
                    storageRecord.Destination = position.PositionNR;
                    storageRecord.OperatorId = operatorNR;
                    storageRecord.ApplicantId = applicantNR;
                    storageRecord.Date = DateTime.Now;
                    storageRecord.Quantity = 1;
                    storageRecord.TargetNR = moldNR;
                    storageRecord.Remark = remark;
                    storageRecord.RecordType = StorageRecordType.Return;

                    // add new storage record
                    IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
                    recordRep.Add(storageRecord);

                    // update mold last apply storage record nr
                    IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
                    MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
                    lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;

                    // update mold state
                    mold = moldRep.GetById(storageRecord.TargetNR);
                    mold.State =(MoldStateType)moldState;

                    // update workstation mold count
                    IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
                    Workstation workstation = workstationRep.GetById(storageRecord.Source);
                    if(workstation!=null)
                      workstation.CurrentMoldCount--;

                    unitwork.Submit();
                    return new Message() { MsgType = MsgType.OK, Content = "归还成功" };
                }
            }
            catch (Exception ex)
            {
                  LogUtil.log.Error(ex.ToString());
                return new Message() { MsgType = MsgType.Error, Content = ex.Message };
            }
        }
        /// <summary>
        /// 模具移动工作台
        /// </summary>
        /// <param name="moldNR">模具号</param>
        /// <param name="operatorNR">操作员工号</param>
        /// <param name="targetWStationNR">目标工作台号</param>
        /// <returns>移动信息</returns> 
        public Message MoldMoveWorkStation(string moldNR, string operatorNR, string targetWStationNR)
        {
            try
            {
                using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
                {
                    IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
                    IMoldRepository moldRep = new MoldRepository(unitwork);
                    IEmployeeRepository empRep = new EmployeeRepository(unitwork);

                    Mold mold = moldRep.GetById(moldNR);

                    if (!empRep.Exist(operatorNR))
                        return new Message() { MsgType = MsgType.Warn, Content = "操作员不存在!" };
                    if(mold==null)
                        return new Message() { MsgType = MsgType.Warn, Content = "模具不存在!" };
                    Workstation tworkstation=workstationRep.GetById(targetWStationNR);
                    if (tworkstation == null)
                      return new Message() { MsgType = MsgType.Warn, Content = "目标工作台不存在!" };

                      // check mold is available for move
                    if (mold.State != MoldStateType.NotReturned)
                        return new Message() { MsgType = MsgType.Warn, Content = "模具未被借用,请先借用!" };

                    MoldView moldview = moldRep.GetMoldViewByMoldNR(moldNR);

                    string currentWorkPosi = moldview.StorageRecordNR == null ? string.Empty : moldRep.GetMoldCurrPosiByRecordNR((Guid)moldview.StorageRecordNR);

                 //   if(workstationRep.GetById(currentWorkPosi)==null)
                  //      return new Message() { MsgType = MsgType.Warn, Content = "模具正在使用的工作台号已经被修改,请先归还此模具再做后续操作!" };

                    if (currentWorkPosi.Equals(targetWStationNR))
                        return new Message() { MsgType = MsgType.Warn, Content = "模具已经在此工作台,不可重复移动!" };

                    // check workstaition reach the max mold apply number
                    if (workstationRep.OverAppliedMold(targetWStationNR) == false && Settings.Default.AllowOverApply == false)
                        return new Message() { MsgType = MsgType.Warn, Content = "目标工作台已经到达模具使用上限!" };

                    IPositionRepository positionRep = new PositionRepository(unitwork);
                    Position position = positionRep.GetByFacilictyNR(moldNR);

                    //set value of storage record
                    IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
                    StorageRecord storageRecord = new StorageRecord();
                    storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                    storageRecord.PositionId = position.PositionID;
                    storageRecord.Source = currentWorkPosi;
                    storageRecord.Destination = targetWStationNR;
                    storageRecord.OperatorId = operatorNR;
                    storageRecord.Quantity = 1;
                    storageRecord.Date = DateTime.Now;
                    storageRecord.TargetNR = moldNR;
                    storageRecord.RecordType = StorageRecordType.MoveWStation;

                    // add new storage record
                    recordRep.Add(storageRecord);

                    // update mold last apply storage record nr
                    IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
                    MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
                    lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;

                    // update the workstation current mold count
                    //Workstation tworkstation = workstationRep.GetById(storageRecord.Destination);
                    //if(tworkstation!=null)
                      tworkstation.CurrentMoldCount++;

                    Workstation sworkstation = workstationRep.GetById(storageRecord.Source);
                    if(sworkstation!=null)
                       sworkstation.CurrentMoldCount--;

                    unitwork.Submit();
                    return new Message() { MsgType = MsgType.OK, Content = "移动工作台成功!" };
                }
            }
            catch (Exception ex)
            {
                LogUtil.log.Error(ex.ToString());
                return new Message() { MsgType = MsgType.Error, Content = "请核实所填数据的准确性" };
            }
        }
        /// <summary>
        /// 模具移库
        /// </summary>
        /// <param name="moldNR">模具号</param>
        /// <param name="sourcePosiNr">源位置号</param>
        /// <param name="desiPosiNr">目标位置号</param>
        /// <returns>移库信息</returns>
        public Message MoldMoveStore(string moldNR,string warehouseNR,string sourcePosiNr,string desiPosiNr)
        {
            try
            {
                using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
                {
                    IPositionRepository posiRep = new PositionRepository(unitwork);
                    if (!posiRep.PositionExsit(desiPosiNr))
                        return new Message() { MsgType = MsgType.Warn, Content = "目标库位不存在,请核实!" };

                    IMoldRepository moldRep = new MoldRepository(unitwork);
                    if (moldRep.GetMoldNrByPosiNr(desiPosiNr).Length == 0)
                    {
                        // there is no mold in desitination position
                        // add new uniqstorage
                        Position position = posiRep.GetByWarehouseNRAndPositionNR(warehouseNR, desiPosiNr);
                        // add new uniqstorage
                        IUniqStorageRepository uniqStroageRep = new UniqStorageRepository(unitwork);
                        uniqStroageRep.DeleteByMoldNr(moldNR);

                        UniqStorage uniqStorage = new UniqStorage()
                        {
                            UniqStorageId = GuidUtil.GenerateGUID(),
                            UniqNR = moldNR,
                            PositionId = position.PositionID,
                            Quantity = 1
                        };
                        uniqStroageRep.Add(uniqStorage);

                        //set value of storage record
                        StorageRecord storageRecord = new StorageRecord();
                        storageRecord.PositionId = position.PositionID;
                        storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                        storageRecord.Source = sourcePosiNr;
                        storageRecord.Destination = desiPosiNr;
                        storageRecord.Date = DateTime.Now;
                        storageRecord.Quantity = 1;
                        storageRecord.TargetNR = moldNR;
                        storageRecord.RecordType = StorageRecordType.MoveStore;

                        // add new storage record
                        IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
                        recordRep.Add(storageRecord);

                        IMoldLastRecordRepository moldLastRecord = new MoldLastRecordRepository(unitwork);
                        moldLastRecord.GetByMoldNR(moldNR).StorageRecordNR = storageRecord.StorageRecordNR;

                    }
                    else
                    {
                        Position sourcePosi = posiRep.GetByWarehouseNRAndPositionNR(warehouseNR, sourcePosiNr);
                        Position desiPosi = posiRep.GetByWarehouseNRAndPositionNR(warehouseNR, desiPosiNr);
                        UniqStorage sourceU = sourcePosi.UniqStorage.First();
                        UniqStorage desiU = desiPosi.UniqStorage.First();

                        string desiMoldNr = desiU.UniqNR;
                        sourceU.UniqNR = desiMoldNr;
                        desiU.UniqNR = moldNR;
                        // add new storage record
                        IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);

                        StorageRecord sourcestorageRecord = new StorageRecord();
                        sourcestorageRecord.PositionId = sourcePosi.PositionID;
                        sourcestorageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                        sourcestorageRecord.Source = sourcePosiNr;
                        sourcestorageRecord.Destination = desiPosiNr;
                        sourcestorageRecord.Date = DateTime.Now;
                        sourcestorageRecord.Quantity = 1;
                        sourcestorageRecord.TargetNR = moldNR;
                        sourcestorageRecord.RecordType = StorageRecordType.MoveStore;

                        recordRep.Add(sourcestorageRecord);

                        StorageRecord desistorageRecord = new StorageRecord();
                        desistorageRecord.PositionId = desiPosi.PositionID;
                        desistorageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                        desistorageRecord.Source = desiPosiNr;
                        desistorageRecord.Destination = sourcePosiNr;
                        desistorageRecord.Date = DateTime.Now;
                        desistorageRecord.Quantity = 1;
                        desistorageRecord.TargetNR = desiMoldNr;
                        desistorageRecord.RecordType = StorageRecordType.MoveStore;

                        recordRep.Add(desistorageRecord);
                        IMoldLastRecordRepository moldLastRecord = new MoldLastRecordRepository(unitwork);
                        moldLastRecord.GetByMoldNR(moldNR).StorageRecordNR = sourcestorageRecord.StorageRecordNR;
                        moldLastRecord.GetByMoldNR(desiMoldNr).StorageRecordNR = desistorageRecord.StorageRecordNR;

                    }

                    unitwork.Submit();
                    return new Message() { MsgType = MsgType.OK, Content = "移库成功" };
                }
            }
            catch (Exception ex)
            {

                LogUtil.log.Error(ex.ToString());
                return new Message() { MsgType = MsgType.Error, Content = ex.Message };
            }
        }
        /// <summary>
        /// 模具入库
        /// </summary>
        /// <param name="moldNR">模具号</param>
        /// <param name="operatorNR">操作员工号</param>
        /// <param name="warehouseNR">仓库号</param>
        /// <param name="positionNR">库位号</param>
        /// <returns>入库信息</returns>
        public Message MoldInStore(string moldNR, string operatorNR, string warehouseNR, string positionNR)
        {
            try
            {
                using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
                {
                    IPositionRepository positionRep = new PositionRepository(unitwork);
                    IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);

                    // check if mold is reinstore again
                    if (lastRecordRep.MoldInStored(moldNR) == true)
                        return new Message() { MsgType = MsgType.Warn, Content = "此模具已经入库!" };
                    //check if position is available and allow over instore
                    if (positionRep.CheckPositionAvailable(warehouseNR, positionNR, 1) == false && Settings.Default.AllowOverInStore == false)
                        return new Message() { MsgType = MsgType.Warn, Content = "库位容量已打上限!" };

                    Position position = positionRep.GetByWarehouseNRAndPositionNR(warehouseNR, positionNR);

                    // add new uniqstorage
                    IUniqStorageRepository uniqStroageRep = new UniqStorageRepository(unitwork);
                    UniqStorage uniqStorage = new UniqStorage()
                    {
                        UniqStorageId = GuidUtil.GenerateGUID(),
                        UniqNR = moldNR,
                        PositionId = position.PositionID,
                        Quantity = 1
                    };
                    uniqStroageRep.Add(uniqStorage);

                    //set value of storage record
                    StorageRecord storageRecord = new StorageRecord();
                    storageRecord.PositionId = position.PositionID;
                    storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
                    storageRecord.Source = moldNR;
                    storageRecord.Destination = position.PositionNR;
                    storageRecord.OperatorId = operatorNR;
                    storageRecord.Date = DateTime.Now;
                    storageRecord.Quantity = 1;
                    storageRecord.TargetNR = moldNR;
                    storageRecord.RecordType = StorageRecordType.InStore;

                    // add new storage record
                    IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
                    recordRep.Add(storageRecord);

                    // add mold last apply
                    // add mold last apply storage record nr

                    MoldLastRecord lastRecord = new MoldLastRecord()
                    {
                        MoldNR = moldNR,
                         StorageRecordNR = storageRecord.StorageRecordNR
                    };
                   // lastRecord.StroageRecordNR = storageRecord.StorageRecordNR;
                    lastRecordRep.Add(lastRecord);

                    unitwork.Submit();
                    return new Message() { MsgType = MsgType.OK, Content = "入库成功!" };
                }
            }

            catch (Exception ex)
            {
                  LogUtil.log.Error(ex.ToString());
                  return new Message() { MsgType = MsgType.Error, Content = "请核实所填数据的准确性" };
            }
        }