Beispiel #1
0
        public static void smap_writeDMA8Mem(System.IO.UnmanagedMemoryStream pMem, int size)
        {
            if ((DEV9Header.dev9Ru16((int)DEV9Header.SMAP_R_TXFIFO_CTRL) & DEV9Header.SMAP_TXFIFO_DMAEN) != 0)
            {
                int pMemAddr  = 0;
                int valueSize = 4;
                DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR, DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR) & 16383);
                size >>= 1;
                DEV9.DEV9_LOG(" * * SMAP DMA WRITE START: wr_ptr=" + DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR).ToString() + ", rd_ptr=" + DEV9Header.dev9.txfifo_rd_ptr.ToString());
                while (size > 0)
                {
                    pMem.Seek(pMemAddr, System.IO.SeekOrigin.Begin);
                    byte[] valueBytes = new byte[4];
                    pMem.Read(valueBytes, 0, 4);
                    int value = BitConverter.ToInt32(valueBytes, 0); //*pMem;
                    //	value=(value<<24)|(value>>24)|((value>>8)&0xFF00)|((value<<8)&0xFF0000);
                    pMemAddr += valueSize;                           //pMem++;

                    //*((u32*)(dev9.txfifo + dev9Ru32(SMAP_R_TXFIFO_WR_PTR))) = value;
                    byte[] valueBytes2 = BitConverter.GetBytes(value);
                    Utils.memcpy(ref DEV9Header.dev9.txfifo, (int)DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR), valueBytes2, 0, 4);
                    //End
                    DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR, (DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR) + 4) & 16383);
                    size -= valueSize;
                }
                DEV9.DEV9_LOG(" * * SMAP DMA WRITE END:   wr_ptr=" + DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR).ToString() + ", rd_ptr=" + DEV9Header.dev9.txfifo_rd_ptr.ToString());

                DEV9Header.dev9Wu16((int)DEV9Header.SMAP_R_TXFIFO_CTRL, (UInt16)(DEV9Header.dev9Ru16((int)DEV9Header.SMAP_R_TXFIFO_CTRL) & ~DEV9Header.SMAP_TXFIFO_DMAEN));
            }
        }
Beispiel #2
0
        public static void smap_write32(UInt32 addr, UInt32 value)
        {
            if (addr >= DEV9Header.SMAP_EMAC3_REGBASE && addr < DEV9Header.SMAP_EMAC3_REGEND)
            {
                smap_write16(addr, (UInt16)(value & 0xFFFF));
                smap_write16(addr + 2, (UInt16)(value >> 16));
                return;
            }
            switch (addr)
            {
            case DEV9Header.SMAP_R_TXFIFO_DATA:
                if (DEV9Header.dev9.bd_swap != 0)
                {
                    value = (value << 24) | (value >> 24) | ((value >> 8) & 0xFF00) | ((value << 8) & 0xFF0000);
                }

                DEV9.DEV9_LOG("SMAP_R_TXFIFO_DATA 32bit write " + value.ToString("X"));
                //*((u32*)(DEV9Header.dev9.txfifo + dev9Ru32(DEV9Header.SMAP_R_TXFIFO_WR_PTR))) = value; //I'm sorry but what??
                // I think this is how its supposed to work
                byte[] valuebytes = BitConverter.GetBytes(value);
                Utils.memcpy(ref DEV9Header.dev9.txfifo, (int)DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR), valuebytes, 0, 4);
                //end of that one line
                DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR, (DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR) + 4) & 16383);
                return;

            default:
                DEV9.DEV9_LOG("SMAP : Unknown 32 bit write @ " + addr.ToString("X8") + ",v=" + value.ToString("X"));
                DEV9Header.dev9Wu32((int)addr, value);
                return;
            }

            //DEV9.DEV9_LOG("SMAP : error , 32 bit write @ %X,v=%X\n", addr, value);
            //DEV9Header.dev9Wu32((int)addr, value);
        }
Beispiel #3
0
        public static void smap_readDMA8Mem(System.IO.UnmanagedMemoryStream pMem, int size)
        {
            if ((DEV9Header.dev9Ru16((int)DEV9Header.SMAP_R_RXFIFO_CTRL) & DEV9Header.SMAP_RXFIFO_DMAEN) != 0)
            {
                int pMemAddr  = 0;
                int valueSize = 4;
                DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR, DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR) & 16383);
                size >>= 1;
                DEV9.DEV9_LOG(" * * SMAP DMA READ START: rd_ptr=" + DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR).ToString() + ", wr_ptr=" + DEV9Header.dev9.rxfifo_wr_ptr.ToString());
                while (size > 0)
                {
                    //*pMem = *((u32*)(DEV9Header.dev9.rxfifo + DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR)));
                    int    pMemIn      = BitConverter.ToInt32(DEV9Header.dev9.rxfifo, (int)DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR));
                    byte[] pMemInBytes = BitConverter.GetBytes(pMemIn);
                    pMem.Seek(pMemAddr, System.IO.SeekOrigin.Begin);
                    pMem.Write(pMemInBytes, 0, 4);
                    //End write to pMem
                    pMemAddr += valueSize;//pMem++;
                    DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR, (DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR) + 4) & 16383);

                    size -= valueSize;
                }
                DEV9.DEV9_LOG(" * * SMAP DMA READ END:   rd_ptr=" + DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR).ToString() + ", wr_ptr=" + DEV9Header.dev9.rxfifo_wr_ptr.ToString());

                DEV9Header.dev9Wu16((int)DEV9Header.SMAP_R_RXFIFO_CTRL, (UInt16)(DEV9Header.dev9Ru16((int)DEV9Header.SMAP_R_RXFIFO_CTRL) & ~DEV9Header.SMAP_RXFIFO_DMAEN));
            }
        }
Beispiel #4
0
        public static UInt32 smap_read32(UInt32 addr)
        {
            if (addr >= DEV9Header.SMAP_EMAC3_REGBASE && addr < DEV9Header.SMAP_EMAC3_REGEND)
            {
                DEV9.DEV9_LOG("SMAP : 32bit read is double 16bit read");
                UInt32 hi = smap_read16(addr);
                UInt32 lo = (UInt32)((int)smap_read16(addr + 2) << 16);
                DEV9.DEV9_LOG("SMAP : Double 16bit read combined value " + (hi | lo).ToString("X"));
                return(hi | lo);
            }
            switch (addr)
            {
            case DEV9Header.SMAP_R_TXFIFO_FRAME_CNT:
                //Console.Error.WriteLine("SMAP_R_TXFIFO_FRAME_CNT read 32" + DEV9Header.dev9Ru32((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru32((int)addr));

            case DEV9Header.SMAP_R_RXFIFO_FRAME_CNT:
                //Console.Error.WriteLine("SMAP_R_RXFIFO_FRAME_CNT read 32\n" + DEV9Header.dev9Ru32((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru32((int)addr));

            case DEV9Header.SMAP_R_EMAC3_STA_CTRL_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_STA_CTRL_L 32bit read value " + DEV9Header.dev9Ru32((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru32((int)addr));

            case DEV9Header.SMAP_R_RXFIFO_DATA:
            {
                int rd_ptr = (int)DEV9Header.dev9Ru32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR) & 16383;

                //int rv = *((u32*)(dev9.rxfifo + rd_ptr));
                int rv = BitConverter.ToInt32(DEV9Header.dev9.rxfifo, rd_ptr);

                DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR, (UInt32)((rd_ptr + 4) & 16383));

                if (DEV9Header.dev9.bd_swap != 0)
                {
                    rv = (rv << 24) | (rv >> 24) | ((rv >> 8) & 0xFF00) | ((rv << 8) & 0xFF0000);
                }

                DEV9.DEV9_LOG("SMAP_R_RXFIFO_DATA 32bit read " + rv.ToString("X"));
                return((uint)rv);
            }

            default:
                DEV9.DEV9_LOG("SMAP : Unknown 32 bit read @ " + addr.ToString("X8") + ",v=" + DEV9Header.dev9Ru32((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru32((int)addr));
            }

            // DEV9_LOG("SMAP : error , 32 bit read @ %X,v=%X\n", addr, dev9Ru32(addr));
            //return DEV9Header.dev9Ru32((int)addr);
        }
Beispiel #5
0
        public override void DEV9write16(uint addr, ushort value)
        {
            //Console.Error.WriteLine("DEV9write16");
            if (addr >= DEV9Header.ATA_DEV9_HDD_BASE && addr < DEV9Header.ATA_DEV9_HDD_END)
            {
                //#ifdef ENABLE_ATA
                //        ata_write<2>(addr,value);
                //#endif
                //Console.Error.WriteLine("DEV9write16 ATA");
                return;
            }
            if (addr >= DEV9Header.SMAP_REGBASE && addr < DEV9Header.FLASH_REGBASE)
            {
                //smap
                //Console.Error.WriteLine("DEV9write16 SMAP");
                smap.smap_write16(addr, value);
                return;
            }
            switch (addr)
            {
            case DEV9Header.SPD_R_INTR_MASK:
                if ((DEV9Header.dev9Ru16((int)DEV9Header.SPD_R_INTR_MASK) != value) && (((DEV9Header.dev9Ru16((int)DEV9Header.SPD_R_INTR_MASK) | value) & DEV9Header.dev9.irqcause) != 0))
                {
                    DEV9.DEV9_LOG("SPD_R_INTR_MASK16=0x" + value.ToString("X") + " , checking for masked/unmasked interrupts");
                    DEV9Header.DEV9irq(1);
                }
                break;

            default:

                if ((addr >= DEV9Header.FLASH_REGBASE) && (addr < (DEV9Header.FLASH_REGBASE + DEV9Header.FLASH_REGSIZE)))
                {
                    Console.Error.WriteLine("DEV9write16 flash");
                    flash.FLASHwrite32(addr, (UInt32)value, 2);
                    return;
                }
                DEV9Header.dev9Wu16((int)addr, value);
                DEV9.DEV9_LOG("*Unknown 16bit write at address " + addr.ToString("X8") + " value " + value.ToString("X"));
                return;
            }
            DEV9Header.dev9Wu16((int)addr, value);
            DEV9.DEV9_LOG("*Known 16bit write at address " + addr.ToString("X8") + " value " + value.ToString("X"));
        }
Beispiel #6
0
        public static byte smap_read8(UInt32 addr)
        {
            switch (addr)
            {
            case DEV9Header.SMAP_R_TXFIFO_FRAME_CNT:
                //printf("SMAP_R_TXFIFO_FRAME_CNT read 8\n");
                break;

            case DEV9Header.SMAP_R_RXFIFO_FRAME_CNT:
                //printf("SMAP_R_RXFIFO_FRAME_CNT read 8\n");
                break;

            case DEV9Header.SMAP_R_BD_MODE:
                DEV9.DEV9_LOG("SMAP_R_BD_MODE 8bit read value " + DEV9Header.dev9.bd_swap.ToString("X"));
                return(DEV9Header.dev9.bd_swap);

            default:
                DEV9.DEV9_LOG("SMAP : Unknown 8 bit read @ " + addr.ToString("X") + ", v=" + DEV9Header.dev9Ru8((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru8((int)addr));
            }

            DEV9.DEV9_LOG("SMAP : error , 8 bit read @ " + addr.ToString("X") + ", v=" + DEV9Header.dev9Ru8((int)addr).ToString("X"));
            return(DEV9Header.dev9Ru8((int)addr));
        }
Beispiel #7
0
        public override void DEV9write8(uint addr, byte value)
        {
            //Console.Error.WriteLine("DEV9write8");
            if (addr >= DEV9Header.ATA_DEV9_HDD_BASE && addr < DEV9Header.ATA_DEV9_HDD_END)
            {
                //#ifdef ENABLE_ATA
                //        ata_write<1>(addr,value);
                //#endif
                return;
            }
            if (addr >= DEV9Header.SMAP_REGBASE && addr < DEV9Header.FLASH_REGBASE)
            {
                //smap
                smap.smap_write8(addr, value);
                return;
            }
            switch (addr)
            {
            case 0x10000020:
                DEV9Header.dev9.irqcause = 0xff;
                break;

            case DEV9Header.SPD_R_INTR_STAT:
                //emu_printf("SPD_R_INTR_STAT	, WTFH ?\n");
                DEV9Header.dev9.irqcause = value;
                return;

            case DEV9Header.SPD_R_INTR_MASK:
                //emu_printf("SPD_R_INTR_MASK8	, WTFH ?\n");
                break;

            case DEV9Header.SPD_R_PIO_DIR:
                //DEV9.DEV9_LOG("SPD_R_PIO_DIR 8bit write " + value.ToString("X"));

                if ((value & 0xc0) != 0xc0)
                {
                    return;
                }

                if ((value & 0x30) == 0x20)
                {
                    DEV9Header.dev9.eeprom_state = 0;
                }
                DEV9Header.dev9.eeprom_dir = (byte)((value >> 4) & 3);

                return;

            case DEV9Header.SPD_R_PIO_DATA:
                //DEV9.DEV9_LOG("SPD_R_PIO_DATA 8bit write " + value.ToString("X"));

                if ((value & 0xc0) != 0xc0)
                {
                    return;
                }

                switch (DEV9Header.dev9.eeprom_state)
                {
                case DEV9Header.EEPROM_READY:
                    DEV9Header.dev9.eeprom_command = 0;
                    DEV9Header.dev9.eeprom_state++;
                    break;

                case DEV9Header.EEPROM_OPCD0:
                    DEV9Header.dev9.eeprom_command = (byte)((value >> 4) & 2);
                    DEV9Header.dev9.eeprom_state++;
                    DEV9Header.dev9.eeprom_bit = 0xFF;
                    break;

                case DEV9Header.EEPROM_OPCD1:
                    DEV9Header.dev9.eeprom_command |= (byte)((value >> 5) & 1);
                    DEV9Header.dev9.eeprom_state++;
                    break;

                case DEV9Header.EEPROM_ADDR0:
                case DEV9Header.EEPROM_ADDR1:
                case DEV9Header.EEPROM_ADDR2:
                case DEV9Header.EEPROM_ADDR3:
                case DEV9Header.EEPROM_ADDR4:
                case DEV9Header.EEPROM_ADDR5:
                    DEV9Header.dev9.eeprom_address = (byte)
                                                     ((DEV9Header.dev9.eeprom_address & (63 ^ (1 << (DEV9Header.dev9.eeprom_state - DEV9Header.EEPROM_ADDR0)))) |
                                                      ((value >> (DEV9Header.dev9.eeprom_state - DEV9Header.EEPROM_ADDR0)) & (0x20 >> (DEV9Header.dev9.eeprom_state - DEV9Header.EEPROM_ADDR0))));
                    DEV9Header.dev9.eeprom_state++;
                    break;

                case DEV9Header.EEPROM_TDATA:
                {
                    if (DEV9Header.dev9.eeprom_command == 1)             //write
                    {
                        DEV9Header.dev9.eeprom[DEV9Header.dev9.eeprom_address] = (byte)
                                                                                 ((DEV9Header.dev9.eeprom[DEV9Header.dev9.eeprom_address] & (63 ^ (1 << DEV9Header.dev9.eeprom_bit))) |
                                                                                  ((value >> DEV9Header.dev9.eeprom_bit) & (0x8000 >> DEV9Header.dev9.eeprom_bit)));
                        DEV9Header.dev9.eeprom_bit++;
                        if (DEV9Header.dev9.eeprom_bit == 16)
                        {
                            DEV9Header.dev9.eeprom_address++;
                            DEV9Header.dev9.eeprom_bit = 0;
                        }
                    }
                }
                break;
                }

                return;

            default:
                if ((addr >= DEV9Header.FLASH_REGBASE) && (addr < (DEV9Header.FLASH_REGBASE + DEV9Header.FLASH_REGSIZE)))
                {
                    flash.FLASHwrite32(addr, (UInt32)value, 1);
                    return;
                }

                DEV9Header.dev9Wu8((int)addr, value);
                DEV9.DEV9_LOG("*Unknown 8bit write at address " + addr.ToString("X8") + " value " + value.ToString("X"));
                return;
            }
            DEV9Header.dev9Wu8((int)addr, value);
            DEV9.DEV9_LOG("*Known 8bit write at address " + addr.ToString("X8") + " value " + value.ToString("X"));
        }
Beispiel #8
0
        public override byte DEV9read8(uint addr)
        {
            //DEV9_LOG("DEV9read8");
            byte hard;

            if (addr >= DEV9Header.ATA_DEV9_HDD_BASE && addr < DEV9Header.ATA_DEV9_HDD_END)
            {
                //#ifdef ENABLE_ATA
                //        return ata_read<1>(addr);
                //#else
                return(0);
                //#endif
            }
            if (addr >= DEV9Header.SMAP_REGBASE && addr < DEV9Header.FLASH_REGBASE)
            {
                //smap
                //DEV9_LOG("DEV9read8(SMAP)");
                byte ret = smap.smap_read8(addr);
                return(ret);
            }

            switch (addr)
            {
            case DEV9Header.SPD_R_PIO_DATA:

                /*if(dev9.eeprom_dir!=1)
                 * {
                 *  hard=0;
                 *  break;
                 * }*/
                //DEV9_LOG("DEV9read8");

                if (DEV9Header.dev9.eeprom_state == DEV9Header.EEPROM_TDATA)
                {
                    if (DEV9Header.dev9.eeprom_command == 2)     //read
                    {
                        if (DEV9Header.dev9.eeprom_bit == 0xFF)
                        {
                            hard = 0;
                        }
                        else
                        {
                            hard = (byte)(((DEV9Header.dev9.eeprom[DEV9Header.dev9.eeprom_address] << DEV9Header.dev9.eeprom_bit) & 0x8000) >> 11);
                        }
                        DEV9Header.dev9.eeprom_bit++;
                        if (DEV9Header.dev9.eeprom_bit == 16)
                        {
                            DEV9Header.dev9.eeprom_address++;
                            DEV9Header.dev9.eeprom_bit = 0;
                        }
                    }
                    else
                    {
                        hard = 0;
                    }
                }
                else
                {
                    hard = 0;
                }
                DEV9.DEV9_LOG("SPD_R_PIO_DATA read " + hard.ToString("X"));
                return(hard);

            case DEV9Header.DEV9_R_REV:
                hard = 0x32;     // expansion bay
                break;

            default:
                if ((addr >= DEV9Header.FLASH_REGBASE) && (addr < (DEV9Header.FLASH_REGBASE + DEV9Header.FLASH_REGSIZE)))
                {
                    return((byte)flash.FLASHread32(addr, 1));
                }

                hard = DEV9Header.dev9Ru8((int)addr);
                DEV9_LOG("*Unknown 8bit read at address " + addr.ToString("X") + " value " + hard.ToString("X"));
                return(hard);
            }

            //DEV9_LOG("DEV9read8");
            DEV9_LOG("*Known 8bit read at address " + addr.ToString("X") + " value " + hard.ToString("X"));
            return(hard);
        }
Beispiel #9
0
        public static void smap_write16(UInt32 addr, UInt16 value)
        {
            if (addr >= DEV9Header.SMAP_BD_TX_BASE && addr < (DEV9Header.SMAP_BD_TX_BASE + DEV9Header.SMAP_BD_SIZE))
            {
                if (DEV9Header.dev9.bd_swap != 0)
                {
                    value = (UInt16)((value >> 8) | (value << 8));
                }
                DEV9Header.dev9Wu16((int)addr, value);

                return;
            }
            else if (addr >= DEV9Header.SMAP_BD_RX_BASE && addr < (DEV9Header.SMAP_BD_RX_BASE + DEV9Header.SMAP_BD_SIZE))
            {
                int rx_index = (int)((addr - DEV9Header.SMAP_BD_RX_BASE) >> 3);
                if (DEV9Header.dev9.bd_swap != 0)
                {
                    value = (UInt16)((value >> 8) | (value << 8));
                }
                DEV9Header.dev9Wu16((int)addr, value);
                return;
            }

            switch (addr)
            {
            case DEV9Header.SMAP_R_INTR_CLR:
                DEV9.DEV9_LOG("SMAP: SMAP_R_INTR_CLR 16bit write " + value.ToString("X"));
                DEV9Header.dev9.irqcause &= ~value;
                return;

            case DEV9Header.SMAP_R_TXFIFO_WR_PTR:
                DEV9.DEV9_LOG("SMAP: SMAP_R_TXFIFO_WR_PTR 16bit write " + value.ToString("X"));
                DEV9Header.dev9Wu16((int)addr, value);
                return;

            //handle L writes
            //#define EMAC3_L_WRITE(name) \
            //    case name: \
            //        DEV9_LOG("SMAP: " #name " 16 bit write %x\n", value); \
            //        dev9Ru16(addr) = value; \
            //        return;
            case DEV9Header.SMAP_R_EMAC3_MODE0_L:
                DEV9.DEV9_LOG("SMAP: SMAP_R_EMAC3_SMAP_R_EMAC3_MODE0_L 16bit write " + value.ToString("X"));
                DEV9Header.dev9Wu16((int)addr, value);
                return;

            case DEV9Header.SMAP_R_EMAC3_MODE1_L:
                DEV9.DEV9_LOG("SMAP: SMAP_R_EMAC3_SMAP_R_EMAC3_MODE1_L 16bit write " + value.ToString("X"));
                DEV9Header.dev9Wu16((int)addr, value);
                return;

            case DEV9Header.SMAP_R_EMAC3_TxMODE0_L:
            case DEV9Header.SMAP_R_EMAC3_TxMODE1_L:
            case DEV9Header.SMAP_R_EMAC3_RxMODE_L:
            case DEV9Header.SMAP_R_EMAC3_INTR_STAT_L:
            case DEV9Header.SMAP_R_EMAC3_INTR_ENABLE_L:
            case DEV9Header.SMAP_R_EMAC3_ADDR_HI_L:
            case DEV9Header.SMAP_R_EMAC3_ADDR_LO_L:
            case DEV9Header.SMAP_R_EMAC3_VLAN_TPID:
            case DEV9Header.SMAP_R_EMAC3_PAUSE_TIMER_L:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH1:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH2:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH3:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH4:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH1:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH2:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH3:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH4:

            case DEV9Header.SMAP_R_EMAC3_LAST_SA_HI:
            case DEV9Header.SMAP_R_EMAC3_LAST_SA_LO:
            case DEV9Header.SMAP_R_EMAC3_INTER_FRAME_GAP_L:
            case DEV9Header.SMAP_R_EMAC3_STA_CTRL_L:
            case DEV9Header.SMAP_R_EMAC3_TX_THRESHOLD_L:
            case DEV9Header.SMAP_R_EMAC3_RX_WATERMARK_L:
            case DEV9Header.SMAP_R_EMAC3_TX_OCTETS:
            case DEV9Header.SMAP_R_EMAC3_RX_OCTETS:
                DEV9.DEV9_LOG("SMAP: SMAP_R_EMAC3_***(L_Write) 16bit write " + value.ToString("X"));
                //Look at all that logging I'm not doing
                DEV9Header.dev9Wu16((int)addr, value);
                return;

            //#define EMAC3_H_WRITE(name) \
            //    case name: \
            //        DEV9_LOG("SMAP: " #name " 16 bit write %x\n", value); \
            //        dev9Ru16(addr) = value; \
            //        emac3_write(addr-2); \
            //        return;
            //handle H writes
            case DEV9Header.SMAP_R_EMAC3_MODE0_H:
            case DEV9Header.SMAP_R_EMAC3_MODE1_H:
            case DEV9Header.SMAP_R_EMAC3_TxMODE0_H:
            case DEV9Header.SMAP_R_EMAC3_TxMODE1_H:
            case DEV9Header.SMAP_R_EMAC3_RxMODE_H:
            case DEV9Header.SMAP_R_EMAC3_INTR_STAT_H:
            case DEV9Header.SMAP_R_EMAC3_INTR_ENABLE_H:
            case DEV9Header.SMAP_R_EMAC3_ADDR_HI_H:
            case DEV9Header.SMAP_R_EMAC3_ADDR_LO_H:
            case DEV9Header.SMAP_R_EMAC3_VLAN_TPID + 2:
            case DEV9Header.SMAP_R_EMAC3_PAUSE_TIMER_H:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH1 + 2:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH2 + 2:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH3 + 2:
            case DEV9Header.SMAP_R_EMAC3_INDIVID_HASH4 + 2:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH1 + 2:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH2 + 2:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH3 + 2:
            case DEV9Header.SMAP_R_EMAC3_GROUP_HASH4 + 2:

            case DEV9Header.SMAP_R_EMAC3_LAST_SA_HI + 2:
            case DEV9Header.SMAP_R_EMAC3_LAST_SA_LO + 2:
            case DEV9Header.SMAP_R_EMAC3_INTER_FRAME_GAP_H:
            case DEV9Header.SMAP_R_EMAC3_STA_CTRL_H:
            case DEV9Header.SMAP_R_EMAC3_TX_THRESHOLD_H:
            case DEV9Header.SMAP_R_EMAC3_RX_WATERMARK_H:
            case DEV9Header.SMAP_R_EMAC3_TX_OCTETS + 2:
            case DEV9Header.SMAP_R_EMAC3_RX_OCTETS + 2:
                // DEV9_LOG("SMAP: " #name " 16 bit write %x\n", value); \
                DEV9.DEV9_LOG("SMAP: SMAP_R_EMAC3_***(H_Write) 16bit write " + value.ToString("X"));
                DEV9Header.dev9Wu16((int)addr, value);
                emac3_write(addr - 2);
                return;

            default:
                DEV9.DEV9_LOG("SMAP : Unknown 16 bit write @" + addr.ToString("X8") + ",v=" + value.ToString("X"));
                DEV9Header.dev9Wu16((int)addr, value);
                return;
            }

            // DEV9.DEV9_LOG("SMAP : error , 16 bit write @ %X,v=%X\n", addr, value);
            //DEV9Header.dev9Wu16((int)addr, value);
        }
Beispiel #10
0
        //
        public static void smap_write8(UInt32 addr, byte value)
        {
            switch (addr)
            {
            case DEV9Header.SMAP_R_TXFIFO_FRAME_INC:
                DEV9.DEV9_LOG("SMAP_R_TXFIFO_FRAME_INC 8bit write " + value);
                {
                    //DEV9Header.dev9Ru8(DEV9Header.SMAP_R_TXFIFO_FRAME_CNT)++;
                    DEV9Header.dev9Wu8((int)DEV9Header.SMAP_R_TXFIFO_FRAME_CNT, (byte)(DEV9Header.dev9Ru8((int)DEV9Header.SMAP_R_TXFIFO_FRAME_CNT) + 1));
                }
                return;

            case DEV9Header.SMAP_R_RXFIFO_FRAME_DEC:
                DEV9.DEV9_LOG("SMAP_R_RXFIFO_FRAME_DEC 8bit write " + value);
                lock (counter_sentry)
                {
                    DEV9Header.dev9Wu8((int)addr, value);     //yes this is a write
                    {
                        DEV9Header.dev9Wu8((int)DEV9Header.SMAP_R_RXFIFO_FRAME_CNT, (byte)(DEV9Header.dev9Ru8((int)DEV9Header.SMAP_R_RXFIFO_FRAME_CNT) - 1));
                    }
                }
                return;

            case DEV9Header.SMAP_R_TXFIFO_CTRL:
                DEV9.DEV9_LOG("SMAP_R_TXFIFO_CTRL 8bit write " + value.ToString("X"));
                if ((value & DEV9Header.SMAP_TXFIFO_RESET) != 0)
                {
                    DEV9Header.dev9.txbdi         = 0;
                    DEV9Header.dev9.txfifo_rd_ptr = 0;
                    DEV9Header.dev9Wu8((int)DEV9Header.SMAP_R_TXFIFO_FRAME_CNT, 0);     //this actualy needs to be atomic (lock mov ...)
                    DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_TXFIFO_WR_PTR, 0);
                    DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_TXFIFO_SIZE, 16384);
                }
                unchecked
                {
                    value &= (byte)(~DEV9Header.SMAP_TXFIFO_RESET);
                }
                DEV9Header.dev9Wu8((int)addr, value);
                return;

            case DEV9Header.SMAP_R_RXFIFO_CTRL:
                DEV9.DEV9_LOG("SMAP_R_RXFIFO_CTRL 8bit write " + value.ToString("X"));
                if ((value & DEV9Header.SMAP_RXFIFO_RESET) != 0)
                {
                    lock (reset_sentry)
                    {
                        lock (counter_sentry)
                        {
                            DEV9Header.dev9.rxbdi         = 0;
                            DEV9Header.dev9.rxfifo_wr_ptr = 0;
                            DEV9Header.dev9Wu8((int)DEV9Header.SMAP_R_RXFIFO_FRAME_CNT, 0);
                            DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_RXFIFO_RD_PTR, 0);
                            DEV9Header.dev9Wu32((int)DEV9Header.SMAP_R_RXFIFO_SIZE, 16384);
                        }
                    }
                }
                unchecked
                {
                    value &= (byte)(~DEV9Header.SMAP_RXFIFO_RESET);
                }
                DEV9Header.dev9Wu8((int)addr, value);
                return;

            case DEV9Header.SMAP_R_BD_MODE:
                if ((value & DEV9Header.SMAP_BD_SWAP) != 0)
                {
                    DEV9.DEV9_LOG("SMAP_R_BD_MODE: byteswapped.");
                    Console.Error.WriteLine("BD Byteswapping enabled");
                    DEV9Header.dev9.bd_swap = 1;
                }
                else
                {
                    DEV9.DEV9_LOG("SMAP_R_BD_MODE: NOT byteswapped");
                    Console.Error.WriteLine("BD Byteswapping disabled");
                    DEV9Header.dev9.bd_swap = 0;
                }
                return;

            default:
                DEV9.DEV9_LOG("SMAP : Unknown 8 bit write @ " + addr.ToString("X8") + " ,v=" + value.ToString("X"));
                DEV9Header.dev9Wu8((int)addr, value);
                return;
            }

            // DEV9.DEV9_LOG("SMAP : error , 8 bit write @ %X,v=%X\n", addr, value);
            //DEV9Header.dev9Wu8((int)addr, value);
        }
Beispiel #11
0
        public static UInt16 smap_read16(UInt32 addr)
        {
            if (addr >= DEV9Header.SMAP_BD_TX_BASE && addr < (DEV9Header.SMAP_BD_TX_BASE + DEV9Header.SMAP_BD_SIZE))
            {
                int rv = DEV9Header.dev9Ru16((int)addr);
                if (DEV9Header.dev9.bd_swap != 0)
                {
                    DEV9.DEV9_LOG("SMAP : Generic TX read " + ((rv << 8) | (rv >> 8)).ToString("X"));
                    return((UInt16)((rv << 8) | (rv >> 8)));
                }
                DEV9.DEV9_LOG("SMAP : Generic TX read " + rv.ToString("X"));
                return((UInt16)rv);
            }
            else if (addr >= DEV9Header.SMAP_BD_RX_BASE && addr < (DEV9Header.SMAP_BD_RX_BASE + DEV9Header.SMAP_BD_SIZE))
            {
                int rv = DEV9Header.dev9Ru16((int)addr);
                if (DEV9Header.dev9.bd_swap != 0)
                {
                    DEV9.DEV9_LOG("SMAP : Generic RX read " + ((rv << 8) | (rv >> 8)).ToString("X"));
                    return((UInt16)((rv << 8) | (rv >> 8)));
                }
                DEV9.DEV9_LOG("SMAP : Generic RX read " + rv.ToString("X"));
                return((UInt16)rv);
            }

            switch (addr)
            {
            case DEV9Header.SMAP_R_TXFIFO_FRAME_CNT:
                //printf("SMAP_R_TXFIFO_FRAME_CNT read 16\n");
                DEV9.DEV9_LOG("SMAP_R_TXFIFO_FRAME_CNT 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_RXFIFO_FRAME_CNT:
                //printf("SMAP_R_RXFIFO_FRAME_CNT read 16\n");
                DEV9.DEV9_LOG("SMAP_R_RXFIFO_FRAME_CNT 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_MODE0_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_MODE0_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_MODE0_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_MODE0_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_MODE1_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_MODE1_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_MODE1_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_MODE1_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_RxMODE_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_RxMODE_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_RxMODE_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_RxMODE_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_INTR_STAT_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_INTR_STAT_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_INTR_STAT_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_INTR_STAT_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_INTR_ENABLE_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_INTR_ENABLE_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_INTR_ENABLE_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_INTR_ENABLE_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_TxMODE0_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_TxMODE0_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_TxMODE0_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_TxMODE0_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));;
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_TxMODE1_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_TxMODE1_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_TxMODE1_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_TxMODE1_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_STA_CTRL_L:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_STA_CTRL_L 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            case DEV9Header.SMAP_R_EMAC3_STA_CTRL_H:
                DEV9.DEV9_LOG("SMAP_R_EMAC3_STA_CTRL_H 16bit read " + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));

            default:
                DEV9.DEV9_LOG("SMAP: Unknown 16 bit read @ " + addr.ToString("X") + ", v=" + DEV9Header.dev9Ru16((int)addr).ToString("X"));
                return(DEV9Header.dev9Ru16((int)addr));
            }

            //DEV9.DEVLOG_shared.LogWriteLine("SMAP : error , 16 bit read @ " + addr.ToString("X") + ", v=" + DEV9Header.dev9Ru16((int)addr).ToString());
            //return DEV9Header.dev9Ru16((int)addr);
        }
Beispiel #12
0
        private static void emac3_write(UInt32 addr)
        {
            UInt32 value = wswap(DEV9Header.dev9Ru32((int)addr));

            switch (addr)
            {
            case DEV9Header.SMAP_R_EMAC3_MODE0_L:
                DEV9.DEV9_LOG("SMAP: SMAP_R_EMAC3_MODE0 write " + value.ToString("X"));
                value = (value & (~DEV9Header.SMAP_E3_SOFT_RESET)) | DEV9Header.SMAP_E3_TXMAC_IDLE | DEV9Header.SMAP_E3_RXMAC_IDLE;
                UInt16 tmp = (UInt16)(DEV9Header.dev9Ru16((int)DEV9Header.SMAP_R_EMAC3_STA_CTRL_H) | DEV9Header.SMAP_E3_PHY_OP_COMP);
                DEV9Header.dev9Wu16((int)DEV9Header.SMAP_R_EMAC3_STA_CTRL_H, tmp);
                break;

            case DEV9Header.SMAP_R_EMAC3_TxMODE0_L:
                DEV9.DEV9_LOG("SMAP: SMAP_R_EMAC3_TxMODE0_L write " + value.ToString("X"));
                //spams// emu_printf("SMAP: SMAP_R_EMAC3_TxMODE0_L write %x\n", value);
                //Process TX  here ?
                if (!(value != 0) & (DEV9Header.SMAP_E3_TX_GNP_0 != 0))
                {
                    Console.Error.WriteLine("SMAP_R_EMAC3_TxMODE0_L: SMAP_E3_TX_GNP_0 not set");
                }

                tx_process();
                value = value & ~DEV9Header.SMAP_E3_TX_GNP_0;
                if (value != 0)
                {
                    Console.Error.WriteLine("SMAP_R_EMAC3_TxMODE0_L: extra bits set !");
                }
                break;

            case DEV9Header.SMAP_R_EMAC3_TxMODE1_L:
                Console.Error.WriteLine("SMAP_R_EMAC3_TxMODE1_L 32bit write " + value.ToString("X"));
                if (value == 0x380f0000)
                {
                    Console.Error.WriteLine("Adapter Detection Hack - Resetting RX/TX");
                    DEV9._DEV9irq(DEV9Header.SMAP_INTR_RXEND | DEV9Header.SMAP_INTR_TXEND | DEV9Header.SMAP_INTR_TXDNV, 5);
                }
                break;

            case DEV9Header.SMAP_R_EMAC3_STA_CTRL_L:
                DEV9.DEV9_LOG("SMAP: SMAP_R_EMAC3_STA_CTRL write " + value.ToString("X"));
                {
                    if ((value & (DEV9Header.SMAP_E3_PHY_READ)) != 0)
                    {
                        value |= DEV9Header.SMAP_E3_PHY_OP_COMP;
                        int    reg = (int)(value & (DEV9Header.SMAP_E3_PHY_REG_ADDR_MSK));
                        UInt16 val = DEV9Header.dev9.phyregs[reg];
                        switch (reg)
                        {
                        case DEV9Header.SMAP_DsPHYTER_BMSR:
                            if (has_link)
                            {
                                val |= DEV9Header.SMAP_PHY_BMSR_LINK | DEV9Header.SMAP_PHY_BMSR_ANCP;
                            }
                            break;

                        case DEV9Header.SMAP_DsPHYTER_PHYSTS:
                            if (has_link)
                            {
                                val |= DEV9Header.SMAP_PHY_STS_LINK | DEV9Header.SMAP_PHY_STS_100M | DEV9Header.SMAP_PHY_STS_FDX | DEV9Header.SMAP_PHY_STS_ANCP;
                            }
                            break;
                        }
                        DEV9.DEV9_LOG("phy_read " + reg.ToString() + ": " + val.ToString("X"));
                        value = (uint)((value & 0xFFFFu) | (uint)((int)val << 16));
                    }
                    if ((value & (DEV9Header.SMAP_E3_PHY_WRITE)) != 0)
                    {
                        value |= DEV9Header.SMAP_E3_PHY_OP_COMP;
                        int    reg = (int)(value & (DEV9Header.SMAP_E3_PHY_REG_ADDR_MSK));
                        UInt16 val = (UInt16)(value >> 16);
                        switch (reg)
                        {
                        case DEV9Header.SMAP_DsPHYTER_BMCR:
                            unchecked
                            {
                                val &= (ushort)(~DEV9Header.SMAP_PHY_BMCR_RST);
                            }
                            val |= 0x1;
                            break;
                        }
                        DEV9.DEV9_LOG("phy_write " + reg.ToString() + ": " + val.ToString("X"));
                        DEV9Header.dev9.phyregs[reg] = val;
                    }
                }
                break;

            default:
                DEV9.DEV9_LOG("SMAP: emac3 write  " + addr.ToString("X8") + "=" + value.ToString("X"));
                break;
            }
            DEV9Header.dev9Wu32((int)addr, wswap(value));
        }
Beispiel #13
0
        //tx_process
        private static void tx_process()
        {
            //Console.Error.WriteLine("TX");
            //we loop based on count ? or just *use* it ?
            UInt32 cnt = DEV9Header.dev9Ru8((int)DEV9Header.SMAP_R_TXFIFO_FRAME_CNT);

            //spams// printf("tx_process : %d cnt frames !\n",cnt);

            netHeader.NetPacket pk = new netHeader.NetPacket();
            int fc = 0;

            for (fc = 0; fc < cnt; fc++)
            {
                //smap_bd_t *pbd= ((smap_bd_t *)&dev9.dev9R[SMAP_BD_TX_BASE & 0xffff])+dev9.txbdi;

                DEV9Header.smap_bd pbd;
                pbd = new DEV9Header.smap_bd(DEV9Header.dev9.dev9R, (int)((DEV9Header.SMAP_BD_TX_BASE & 0xffff) + (DEV9Header.smap_bd.GetSize() * DEV9Header.dev9.txbdi)));

                if (!((pbd.ctrl_stat & DEV9Header.SMAP_BD_TX_READY) != 0))
                {
                    Console.Error.WriteLine("ERROR : !pbd->ctrl_stat&SMAP_BD_TX_READY\n");
                    break;
                }
                if ((pbd.length & 3) != 0)
                {
                    //spams// emu_printf("WARN : pbd->length not alligned %d\n",pbd->length);
                }

                if (pbd.length > 1514)
                {
                    Console.Error.WriteLine("ERROR : Trying to send packet too big.\n");
                }
                else
                {
                    UInt32 _base = (UInt32)((pbd.pointer - 0x1000) & 16383);
                    DEV9.DEV9_LOG("Sending Packet from base " + _base.ToString("X") + ", size " + pbd.length);
                    //The 1st packet we send should be base 0, size 1514
                    //spams// emu_printf("Sending Packet from base %x, size %d\n", base, pbd->length);

                    pk.size = pbd.length;

                    if (!(pbd.pointer >= 0x1000))
                    {
                        DEV9.DEV9_LOG("ERROR: odd , !pbd->pointer>0x1000 | 0x" + pbd.pointer.ToString("X") + " " + pbd.length.ToString());
                    }

                    if (_base + pbd.length > 16384)
                    {
                        UInt32 was = 16384 - _base;
                        Utils.memcpy(ref pk.buffer, 0, DEV9Header.dev9.txfifo, (int)_base, (int)was);
                        Utils.memcpy(ref pk.buffer, (int)was, DEV9Header.dev9.txfifo, 0, (int)(pbd.length - was)); //I thingk this was a bug in the original plugin
                        Console.Error.WriteLine("Warped read, was=" + was + ", sz=" + pbd.length + ", sz-was=" + (pbd.length - was));
                    }
                    else
                    {
                        Utils.memcpy(ref pk.buffer, 0, DEV9Header.dev9.txfifo, (int)_base, (int)pbd.length);
                    }
                    net.tx_put(ref pk);
                }

                unchecked
                {
                    pbd.ctrl_stat &= (UInt16)(~DEV9Header.SMAP_BD_TX_READY);
                }

                //increase TXBD
                DEV9Header.dev9.txbdi++;
                DEV9Header.dev9.txbdi &= (DEV9Header.SMAP_BD_SIZE / 8) - 1;

                //decrease frame count -- this is not thread safe
                //dev9Ru8(SMAP_R_TXFIFO_FRAME_CNT)--;
                DEV9Header.dev9Wu8((int)DEV9Header.SMAP_R_TXFIFO_FRAME_CNT, (byte)(DEV9Header.dev9Ru8((int)DEV9Header.SMAP_R_TXFIFO_FRAME_CNT) - 1));
            }

            //spams// emu_printf("processed %d frames, %d count, cnt = %d\n",fc,dev9Ru8(SMAP_R_TXFIFO_FRAME_CNT),cnt);
            //if some error/early exit signal TXDNV
            if (fc != cnt || cnt == 0)
            {
                Console.Error.WriteLine("WARN : (fc!=cnt || cnt==0) but packet send request was made oO..");
                DEV9._DEV9irq(DEV9Header.SMAP_INTR_TXDNV, 0);
            }
            //if we actualy send something send TXEND
            if (fc != 0)
            {
                DEV9._DEV9irq(DEV9Header.SMAP_INTR_TXEND, 100);//now ? or when the fifo is empty ? i guess now atm
            }
        }
Beispiel #14
0
        public static UInt32 FLASHread32(UInt32 addr, int size)
        {
            UInt32 valueInt;
            UInt32 refill = 0;

            byte[] valueByte = new byte[4]; //allocate Uint32 space

            switch (addr)
            {
            case DEV9Header.FLASH_R_DATA:
                Utils.memcpy(ref valueByte, 0, data, (int)counter, size);
                counter += (uint)size;
                DEV9.DEV9_LOG("*FLASH DATA " + (size * 8).ToString() + "bit read 0x" + BitConverter.ToUInt32(valueByte, 0).ToString("X8") + " " + (((ctrl & DEV9Header.FLASH_PP_READ) != 0) ? "READ_ENABLE" : "READ_DISABLE").ToString());
                if (cmd == DEV9Header.SM_CMD_READ3)
                {
                    if (counter >= PAGE_SIZE_ECC)
                    {
                        counter = PAGE_SIZE;
                        refill  = 1;
                    }
                }
                else
                {
                    if (((ctrl & DEV9Header.FLASH_PP_NOECC) != 0) && (counter >= PAGE_SIZE))
                    {
                        counter %= PAGE_SIZE;
                        refill   = 1;
                    }
                    else
                    if (!((ctrl & DEV9Header.FLASH_PP_NOECC) != 0) && (counter >= PAGE_SIZE_ECC))
                    {
                        counter %= PAGE_SIZE_ECC;
                        refill   = 1;
                    }
                }

                if (refill != 0)
                {
                    unchecked
                    {
                        ctrl &= (uint)~DEV9Header.FLASH_PP_READY;
                    }
                    address += PAGE_SIZE;
                    address %= CARD_SIZE;
                    Utils.memcpy(ref data, 0, file, (int)((address >> PAGE_SIZE_BITS) * PAGE_SIZE_ECC), PAGE_SIZE);
                    calculateECC(data);         // calculate ECC; should be in the file already
                    ctrl |= DEV9Header.FLASH_PP_READY;
                }

                return(BitConverter.ToUInt32(valueByte, 0));

            case DEV9Header.FLASH_R_CMD:
                DEV9.DEV9_LOG("*FLASH CMD " + (size * 8).ToString() + "bit read " + getCmdName(cmd) + " DENIED\n");
                return(cmd);

            case DEV9Header.FLASH_R_ADDR:
                DEV9.DEV9_LOG("*FLASH ADDR " + (size * 8).ToString() + "bit read DENIED\n");
                return(0);

            case DEV9Header.FLASH_R_CTRL:
                DEV9.DEV9_LOG("*FLASH CTRL " + (size * 8).ToString() + "bit read " + ctrl.ToString("X8"));
                return(ctrl);

            case DEV9Header.FLASH_R_ID:
                if (cmd == DEV9Header.SM_CMD_READID)
                {
                    DEV9.DEV9_LOG("*FLASH ID " + (size * 8).ToString() + "bit read " + id.ToString("X8"));
                    return(id);   //0x98=Toshiba/0xEC=Samsung maker code should be returned first
                }
                else
                if (cmd == DEV9Header.SM_CMD_GETSTATUS)
                {
                    valueInt = 0x80 | ((ctrl & 1) << 6);                // 0:0=pass, 6:ready/busy, 7:1=not protected
                    DEV9.DEV9_LOG("*FLASH STATUS " + (size * 8).ToString() + "bit read " + valueInt.ToString("X8"));
                    return(valueInt);
                }        //else fall off
                //dosn't like falling though...
                DEV9.DEV9_LOG("*FLASH Unkwnown " + (size * 8).ToString() + "bit read at address " + addr.ToString("X8"));
                return(0);

            default:
                DEV9.DEV9_LOG("*FLASH Unkwnown " + (size * 8).ToString() + "bit read at address " + addr.ToString("X8"));
                return(0);
            }
        }
Beispiel #15
0
        public static void FLASHwrite32(UInt32 addr, UInt32 value, int size)
        {
            switch (addr & 0x1FFFFFFF)
            {
            case DEV9Header.FLASH_R_DATA:

                DEV9.DEV9_LOG("*FLASH DATA " + (size * 8).ToString("X8") + "bit write 0x" + value.ToString("X8") + " " + (((ctrl & DEV9Header.FLASH_PP_WRITE) != 0) ? "WRITE_ENABLE" : "WRITE_DISABLE"));
                byte[] valueBytes = BitConverter.GetBytes(value);
                Utils.memcpy(ref data, (int)counter, valueBytes, 0, size);
                counter += (uint)size;
                counter %= PAGE_SIZE_ECC;    //should not get past the last byte, but at the end
                break;

            case DEV9Header.FLASH_R_CMD:
                if (!((ctrl & DEV9Header.FLASH_PP_READY) != 0))
                {
                    if ((value != DEV9Header.SM_CMD_GETSTATUS) && (value != DEV9Header.SM_CMD_RESET))
                    {
                        DEV9.DEV9_LOG("*FLASH CMD " + (size * 8).ToString() + "bit write " + getCmdName(value) + " ILLEGAL in busy mode - IGNORED");
                        break;
                    }
                }
                if (cmd == DEV9Header.SM_CMD_WRITEDATA)
                {
                    if ((value != DEV9Header.SM_CMD_PROGRAMPAGE) && (value != DEV9Header.SM_CMD_RESET))
                    {
                        DEV9.DEV9_LOG("*FLASH CMD " + (size * 8).ToString() + "bit write " + getCmdName(value) + " ILLEGAL after WRITEDATA cmd - IGNORED");
                        unchecked
                        {
                            ctrl &= (uint)(~DEV9Header.FLASH_PP_READY);    //go busy, reset is needed
                        }
                        break;
                    }
                }
                DEV9.DEV9_LOG("*FLASH CMD " + (size * 8).ToString() + "bit write " + getCmdName(value));
                switch (value)
                {                                                                                                                                       // A8 bit is encoded in READ cmd;)
                case DEV9Header.SM_CMD_READ1: counter = 0; if (cmd != DEV9Header.SM_CMD_GETSTATUS)
                    {
                        address = counter;
                    }
                    addrbyte = 0; break;

                case DEV9Header.SM_CMD_READ2: counter = PAGE_SIZE / 2; if (cmd != DEV9Header.SM_CMD_GETSTATUS)
                    {
                        address = counter;
                    }
                    addrbyte = 0; break;

                case DEV9Header.SM_CMD_READ3: counter = PAGE_SIZE; if (cmd != DEV9Header.SM_CMD_GETSTATUS)
                    {
                        address = counter;
                    }
                    addrbyte = 0; break;

                case DEV9Header.SM_CMD_RESET: FLASHinit(); break;

                case DEV9Header.SM_CMD_WRITEDATA: counter = 0; address = counter; addrbyte = 0; break;

                case DEV9Header.SM_CMD_ERASEBLOCK: counter = 0; Utils.memset(ref data, 0, 0xFF, PAGE_SIZE); address = counter; addrbyte = 1; break;

                case DEV9Header.SM_CMD_PROGRAMPAGE:             //fall
                case DEV9Header.SM_CMD_ERASECONFIRM:
                    unchecked
                    {
                        ctrl &= (uint)(~DEV9Header.FLASH_PP_READY);
                    }
                    calculateECC(data);
                    Utils.memcpy(ref file, (int)((address / PAGE_SIZE) * PAGE_SIZE_ECC), data, 0, PAGE_SIZE_ECC);
                    /*write2file*/
                    ctrl |= DEV9Header.FLASH_PP_READY; break;

                case DEV9Header.SM_CMD_GETSTATUS: break;

                case DEV9Header.SM_CMD_READID: counter = 0; address = counter; addrbyte = 0; break;

                default:
                    unchecked
                    {
                        ctrl &= (uint)~DEV9Header.FLASH_PP_READY;
                    }
                    return;        //ignore any other command; go busy, reset is needed
                }
                cmd = value;
                break;

            case DEV9Header.FLASH_R_ADDR:
                DEV9.DEV9_LOG("*FLASH ADDR " + (size * 8).ToString() + "bit write 0x" + value.ToString("X8"));
                address |= (uint)((int)(value & 0xFF) << (int)(addrbyte == 0 ? 0 : (1 + 8 * addrbyte)));
                addrbyte++;
                DEV9.DEV9_LOG("*FLASH ADDR = 0x" + address + " (addrbyte=" + addrbyte.ToString() + ")\n");
                if (!((value & 0x100) != 0))
                {       // address is complete
                    if ((cmd == DEV9Header.SM_CMD_READ1) || (cmd == DEV9Header.SM_CMD_READ2) || (cmd == DEV9Header.SM_CMD_READ3))
                    {
                        unchecked
                        {
                            ctrl &= (uint)~DEV9Header.FLASH_PP_READY;
                        }
                        Utils.memcpy(ref data, 0, file, (int)((address >> PAGE_SIZE_BITS) * PAGE_SIZE_ECC), PAGE_SIZE);
                        calculateECC(data);     // calculate ECC; should be in the file already
                        ctrl |= DEV9Header.FLASH_PP_READY;
                    }
                    addrbyte = 0;               // address reset
                    {
                        UInt32 bytes, pages, blocks;

                        blocks = address / BLOCK_SIZE;
                        pages  = address - (blocks * BLOCK_SIZE);
                        bytes  = pages % PAGE_SIZE;
                        pages  = pages / PAGE_SIZE;
                        DEV9.DEV9_LOG("*FLASH ADDR = 0x" + address.ToString("X8") + " (" + blocks + ":" + pages + ":" + bytes + ") (addrbyte=" + addrbyte + ") FINAL");
                    }
                }
                break;

            case DEV9Header.FLASH_R_CTRL:
                DEV9.DEV9_LOG("*FLASH CTRL " + (size * 8).ToString() + "bit write 0x" + value.ToString("X8"));
                ctrl = (uint)((ctrl & DEV9Header.FLASH_PP_READY) | (value & ~DEV9Header.FLASH_PP_READY));
                break;

            case DEV9Header.FLASH_R_ID:
                DEV9.DEV9_LOG("*FLASH ID " + (size * 8).ToString() + "bit write 0x" + value.ToString("X8") + " DENIED :P");
                break;

            default:
                DEV9.DEV9_LOG("*FLASH Unkwnown " + (size * 8).ToString() + "bit write at address 0x" + addr.ToString("X8") + "= 0x" + value.ToString() + " IGNORED");
                break;
            }
        }