private void writeFileToFlash(bool setAddresses)
{
if (!selectC2Device())
return;
if (FileName.Text.Length == 0)
{
if (openFileDialog.ShowDialog() == DialogResult.OK)
{
FileName.Text = openFileDialog.FileName;
setAddresses = true;
}
else
return;
}
try
{
int flashSize = CurrentC2Device.Bottom;
byte[] flash_buffer = new byte[flashSize];
for (int idx = 0; idx < flash_buffer.Length; idx++)
flash_buffer[idx] = 0xFF;
List<HexRange> ranges = new List<HexRange>();
bool enableFlash = false;
int startAddress = -1, endAddress = -1;
if (!validInt(StartAddr.Text, out startAddress) || !validInt(EndAddr.Text, out endAddress))
return;
if (Path.GetExtension(FileName.Text).Equals(".hex", StringComparison.InvariantCultureIgnoreCase))
{
int minAddress = int.MaxValue, maxAddress = int.MinValue;
bool fail = false;
#region Load HEX file
using (TextReader s = new StreamReader(FileName.Text))
{
string line;
int lineNumber = 0;
int count = 0;
int ext_address = 0, seg_address = 0, address = 0;
byte command = 0;
byte checksum = 0;
int pos;
byte data;
while ((line = s.ReadLine()) != null)
{
++lineNumber;
line = line.Trim();
if (line.Length == 0 || !line.StartsWith(":"))
continue;
if (line.Length < 11)
{
fail = true;
}
else
{
fail |= !int.TryParse(line.Substring(1, 2), NumberStyles.HexNumber, CultureInfo.InvariantCulture, out count);
fail |= !int.TryParse(line.Substring(3, 4), NumberStyles.HexNumber, CultureInfo.InvariantCulture, out address);
fail |= !byte.TryParse(line.Substring(7, 2), NumberStyles.HexNumber, CultureInfo.InvariantCulture, out command);
fail |= !byte.TryParse(line.Substring(line.Length - 2, 2), NumberStyles.HexNumber, CultureInfo.InvariantCulture, out checksum);
}
if (fail)
{
MessageBox.Show(string.Format("Can't parse line {0}", lineNumber));
break;
}
int calculatedCheckSum = count + ((address >> 8) & 0xFF) + (address & 0xFF) + command;
pos = 9;
if (command == 2 || command == 4)
{
if (line.Length != 15)
fail = true;
else if(command == 2)
fail |= !int.TryParse(line.Substring(pos, 4), NumberStyles.HexNumber, null, out seg_address);
else
fail |= !int.TryParse(line.Substring(pos, 4), NumberStyles.HexNumber, null, out ext_address);
if (fail)
{
if(command == 2)
MessageBox.Show(string.Format("Bad extended segment address record at line {0}.", lineNumber));
else
MessageBox.Show(string.Format("Bad extended linear address record at line {0}.", lineNumber));
}
}
else if (command == 0)
{
if (count > 0)
{
int next = address + count;
bool add = true;
foreach (HexRange range in ranges)
{
if (range.Next == address)
{
range.Count += count;
add = false;
break;
}
else if (next == range.Address)
{
range.Address = address;
range.Count += count;
add = false;
break;
}
fail = range.IsInner(address) || range.IsInner(next);
if (fail)
break;
}
if (fail)
{
MessageBox.Show(string.Format("Address range overlapped at line {0}.", lineNumber));
break;
}
if (add)
ranges.Add(new HexRange(address, count));
}
for (; count > 0; --count)
{
if (address >= flashSize)
{
MessageBox.Show(string.Format("Address {0} outside flash size at line {1}.", addressToText(address), lineNumber));
fail = true;
break;
}
if (CurrentC2Device.LockType == "FLT_SINGLE" && address == CurrentC2Device.SingleLock)
{
if (MessageBox.Show(string.Format("File write to LOCK byte ({0:X4}).\nAre you sure ?", address), "Attention", MessageBoxButtons.OKCancel, MessageBoxIcon.Warning, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly) != DialogResult.OK)
{
fail = true;
break;
}
}
if (address < minAddress)
minAddress = address;
if (address > maxAddress)
maxAddress = address;
fail |= !byte.TryParse(line.Substring(pos, 2), NumberStyles.HexNumber, CultureInfo.InvariantCulture, out data);
pos += 2;
if (fail)
{
MessageBox.Show(string.Format("Bad data \"{0}\" at line {1}.", line.Substring(pos, 2), lineNumber));
break;
}
flash_buffer[address++] = data;
calculatedCheckSum += (int)data;
}
}
if (fail)
break;
fail |= (((calculatedCheckSum + checksum) & 0xFF) != 0);
if (fail)
{
MessageBox.Show(string.Format("Bad checksum {0:X2}:{1:X2} at line {2}.", checksum, calculatedCheckSum, lineNumber));
break;
}
// EOF record
if (command == 1)
break;
}
s.Close();
}
#endregion
#region Collapse HEX ranges and check overlap
if (!fail)
{
if (ranges.Count == 0)
{
MessageBox.Show("No data to write in file");
fail = true;
}
else
{
for (int i = 0; i < ranges.Count; i++)
{
HexRange rangeI = ranges[i];
for (int j = 0; j < ranges.Count; j++)
{
if (i == j)
continue;
HexRange rangeJ = ranges[j];
if (rangeI.Next == rangeJ.Address)
{
rangeI.Count += rangeJ.Count;
ranges.RemoveAt(j);
i = -1;
break;
}
if (rangeJ.Next == rangeI.Address)
{
rangeJ.Count += rangeI.Count;
ranges.RemoveAt(i);
i = -1;
break;
}
fail = rangeI.IsInner(rangeJ.Address) || rangeI.IsInner(rangeJ.Next);
if (fail)
{
MessageBox.Show(string.Format("Addresses overlapped {0}:{1} and {2}:{3}",
addressToText(rangeI.Address),
addressToText(rangeI.Next),
addressToText(rangeJ.Address),
addressToText(rangeJ.Next)
));
break;
}
}
if (fail)
break;
}
}
}
#endregion
#region Check Addresses and ranges
if (!fail)
{
if (setAddresses)
{
if (ranges.Count > 0)
{
startAddress = minAddress;
endAddress = maxAddress;
StartAddr.Text = addressToText(minAddress);
EndAddr.Text = addressToText(maxAddress);
}
}
else if (endAddress > maxAddress || startAddress < minAddress)
{
MessageBox.Show("File data less than bytes to write");
fail = true;
}
else
{
HexRange range = new HexRange(startAddress, endAddress - startAddress + 1);
for (int i = 0; i < ranges.Count; ++i)
{
HexRange rangeS = ranges[i];
if (!range.IsOverlapped(rangeS))
{
ranges.RemoveAt(i);
--i;
}
}
}
}
if (!fail)
{
if (ranges.Count == 0)
{
MessageBox.Show("No data to write in file");
fail = true;
}
else
enableFlash = true;
}
#endregion
}
else if (Path.GetExtension(FileName.Text).Equals(".bin", StringComparison.InvariantCultureIgnoreCase))
{
#region Load BIN file
using (Stream s = File.OpenRead(FileName.Text))
{
enableFlash = true;
int fileLength = (int)s.Length;
if (setAddresses)
{
endAddress = startAddress + fileLength - 1;
if (startAddress >= flashSize)
{
MessageBox.Show("Invalid start address");
enableFlash = false;
}
else if (endAddress >= flashSize)
{
if (MessageBox.Show("File data more than available flash.\nWrite partial content ?", "Attension", MessageBoxButtons.OKCancel, MessageBoxIcon.Warning, MessageBoxDefaultButton.Button1, MessageBoxOptions.DefaultDesktopOnly) != DialogResult.OK)
enableFlash = false;
else
{
endAddress = flashSize - startAddress - 1;
fileLength = flashSize - startAddress;
}
}
else
EndAddr.Text = addressToText(endAddress);
}
else if ((endAddress - startAddress + 1) > fileLength)
{
MessageBox.Show("File data less than bytes to write");
enableFlash = false;
}
if (enableFlash)
s.Read(flash_buffer, startAddress, fileLength);
s.Close();
}
#endregion
}
else
{
MessageBox.Show("Insupported file type");
}
if (enableFlash)
{
if (startAddress < 0 ||
endAddress < 0 ||
startAddress >= flashSize ||
endAddress >= flashSize
)
MessageBox.Show("File data more than available flash.");
else
{
int byteCount = endAddress - startAddress + 1;
if (MessageBox.Show(
string.Format(
"Continue write {0} bytes\nfrom {1} to {2}",
addressToText(byteCount),
addressToText(startAddress),
addressToText(endAddress)),
"Attention", MessageBoxButtons.OKCancel, MessageBoxIcon.Question, MessageBoxDefaultButton.Button2) == DialogResult.OK)
{
float delta = ((float)(progress.Maximum - progress.Minimum)) / (float)byteCount;
int writtenBytes = 0;
Response response = null;
int addressAt = startAddress;
int totalBytes = byteCount;
ranges.Clear();
while (byteCount > 0)
{
int count = (byteCount > 128) ? 128 : byteCount;
#region Auto erase page
if (cbAutoErase.Checked)
{
// Check for page erase
bool erase = true;
foreach (HexRange range in ranges)
{
if (range.IsInner(startAddress))
{
erase = false;
break;
}
}
if (erase)
{
response = sendCommand(0, C2_ERASE_PAGE, (byte)((startAddress >> 9) & 0xFF));
if (response.Result != ResponseCode.COMMAND_OK)
break;
ranges.Add(new HexRange(startAddress & ~(CurrentC2Device.FlashSectorSize - 1), CurrentC2Device.FlashSectorSize));
}
// Also check end address to erase
erase = true;
endAddress = startAddress + count - 1;
foreach (HexRange range in ranges)
{
if (range.IsInner(endAddress))
{
erase = false;
break;
}
}
if (erase)
{
response = sendCommand(0, C2_ERASE_PAGE, (byte)((endAddress >> 9) & 0xFF));
if (response.Result != ResponseCode.COMMAND_OK)
break;
ranges.Add(new HexRange(endAddress & ~(CurrentC2Device.FlashSectorSize - 1), CurrentC2Device.FlashSectorSize));
}
}
#endregion
response = sendCommand(0, flash_buffer, startAddress, count, C2_WRITE_FLASH, (byte)(startAddress & 0xFF), (byte)((startAddress >> 8) & 0xFF), (byte)count);
if (response.Result != ResponseCode.COMMAND_OK)
break;
startAddress += count;
byteCount -= count;
writtenBytes += count;
if (writtenBytes % 512 == 0)
{
progress.Value = (int)(delta * ((float)(writtenBytes)));
status.Text = string.Format("Writing {0} bytes at {1} ({2}%)...", addressToText(count), addressToText(startAddress), (int)(100 * writtenBytes / totalBytes));
Application.DoEvents();
}
}
progress.Value = progress.Minimum;
if (C2_Disconnect_Target() && C2_Connect_Target() && C2_Device_Info() && response != null)
{
if(response.Result != ResponseCode.COMMAND_OK)
setStatus("C2_WRITE_FLASH", response);
else
status.Text = string.Format("Writing {0} bytes at {1} complete.", addressToText(totalBytes), addressToText(addressAt));
}
}
}
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public bool IsOverlapped(HexRange range)
{
if (range.Address >= next)
return false;
if (range.Next <= address)
return false;
if (this.IsInner(range.Address) || this.IsInner(range.Next - 1))
return true;
if (range.IsInner(address) || range.IsInner(next - 1))
return true;
return false;
}