public unsafe static void GetCalculatedTransformB(this SliderConstraint obj, out OpenTK.Matrix4 value)
{
fixed(OpenTK.Matrix4 *valuePtr = &value)
{
*(BulletSharp.Math.Matrix *)valuePtr = obj.CalculatedTransformB;
}
}
public unsafe static void GetFrameOffsetB(this SliderConstraint obj, out OpenTK.Matrix4 value)
{
fixed(OpenTK.Matrix4 *valuePtr = &value)
{
*(BulletSharp.Math.Matrix *)valuePtr = obj.FrameOffsetB;
}
}
public unsafe static void CalculateTransforms(this SliderConstraint obj, ref OpenTK.Matrix4 transA, ref OpenTK.Matrix4 transB)
{
fixed(OpenTK.Matrix4 *transAPtr = &transA)
{
fixed(OpenTK.Matrix4 *transBPtr = &transB)
{
obj.CalculateTransforms(ref *(BulletSharp.Math.Matrix *)transAPtr, ref *(BulletSharp.Math.Matrix *)transBPtr);
}
}
}
/*
* public unsafe static void GetInfo2NonVirtual(this SliderConstraint obj, ConstraintInfo2 info, ref OpenTK.Matrix4 transA, ref OpenTK.Matrix4 transB, ref OpenTK.Vector3 linVelA, ref OpenTK.Vector3 linVelB, float rbAinvMass, float rbBinvMass)
* {
* fixed (OpenTK.Matrix4* transAPtr = &transA)
* {
* fixed (OpenTK.Matrix4* transBPtr = &transB)
* {
* fixed (OpenTK.Vector3* linVelAPtr = &linVelA)
* {
* fixed (OpenTK.Vector3* linVelBPtr = &linVelB)
* {
* obj.GetInfo2NonVirtual(info, ref *(BulletSharp.Math.Matrix*)transAPtr, ref *(BulletSharp.Math.Matrix*)transBPtr, ref *(BulletSharp.Math.Vector3*)linVelAPtr, ref *(BulletSharp.Math.Vector3*)linVelBPtr, rbAinvMass, rbBinvMass);
* }
* }
* }
* }
* }
*/
public unsafe static void SetFrames(this SliderConstraint obj, ref OpenTK.Matrix4 frameA, ref OpenTK.Matrix4 frameB)
{
fixed(OpenTK.Matrix4 *frameAPtr = &frameA)
{
fixed(OpenTK.Matrix4 *frameBPtr = &frameB)
{
obj.SetFrames(ref *(BulletSharp.Math.Matrix *)frameAPtr, ref *(BulletSharp.Math.Matrix *)frameBPtr);
}
}
}
//called by Physics World just before constraint is added to world.
//the current constraint properties are used to rebuild the constraint.
internal override bool _BuildConstraint()
{
BPhysicsWorld world = BPhysicsWorld.Get();
if (constraintPtr != null) {
if (isInWorld && world != null) {
isInWorld = false;
world.RemoveConstraint(constraintPtr);
}
}
if (targetRigidBodyA == null) {
Debug.LogError("Constraint target rigid body was not set.");
return false;
}
RigidBody rba = targetRigidBodyA.GetRigidBody();
if (rba == null) {
Debug.LogError("Constraint could not get bullet RigidBody from target rigid body");
return false;
}
if (constraintType == ConstraintType.constrainToAnotherBody)
{
RigidBody rbb = targetRigidBodyB.GetRigidBody();
if (rbb == null)
{
Debug.LogError("Constraint could not get bullet RigidBody from target rigid body");
return false;
}
BulletSharp.Math.Matrix frameInA = BulletSharp.Math.Matrix.AffineTransformation(1f, Quaternion.LookRotation(localForwardInA, localUpInA).ToBullet(), localPointInA.ToBullet());
BulletSharp.Math.Matrix frameInB = BulletSharp.Math.Matrix.AffineTransformation(1f, Quaternion.LookRotation(localForwardInB, localUpInB).ToBullet(), localPointInB.ToBullet());
constraintPtr = new SliderConstraint(rba,rbb, frameInA, frameInB, false);
} else
{
BulletSharp.Math.Matrix frameInA = BulletSharp.Math.Matrix.AffineTransformation(1f, Quaternion.LookRotation(localForwardInA, localUpInA).ToBullet(), localPointInA.ToBullet());
constraintPtr = new SliderConstraint(rba, frameInA, false);
}
SliderConstraint sl = (SliderConstraint)constraintPtr;
sl.LowerLinearLimit = lowerLinearLimit;
sl.UpperLinearLimit = upperLinearLimit;
sl.LowerAngularLimit = lowerAngularLimit;
sl.UpperAngularLimit = upperAngularLimit;
return true;
}
protected override void OnInitializePhysics()
{
SetupEmptyDynamicsWorld();
IsDebugDrawEnabled = true;
CollisionShape groundShape = new BoxShape(50, 1, 50);
//CollisionShape groundShape = new StaticPlaneShape(Vector3.UnitY, 40);
CollisionShapes.Add(groundShape);
RigidBody body = LocalCreateRigidBody(0, Matrix.Translation(0, -16, 0), groundShape);
body.UserObject = "Ground";
CollisionShape shape = new BoxShape(new Vector3(CubeHalfExtents));
CollisionShapes.Add(shape);
const float THETA = (float)Math.PI/4.0f;
float L_1 = 2 - (float)Math.Tan(THETA);
float L_2 = 1 / (float)Math.Cos(THETA);
float RATIO = L_2/L_1;
RigidBody bodyA;
RigidBody bodyB;
CollisionShape cylA = new CylinderShape(0.2f, 0.25f, 0.2f);
CollisionShape cylB = new CylinderShape(L_1, 0.025f, L_1);
CompoundShape cyl0 = new CompoundShape();
cyl0.AddChildShape(Matrix.Identity, cylA);
cyl0.AddChildShape(Matrix.Identity, cylB);
float mass = 6.28f;
Vector3 localInertia;
cyl0.CalculateLocalInertia(mass, out localInertia);
RigidBodyConstructionInfo ci = new RigidBodyConstructionInfo(mass, null, cyl0, localInertia);
ci.StartWorldTransform = Matrix.Translation(-8, 1, -8);
body = new RigidBody(ci); //1,0,cyl0,localInertia);
World.AddRigidBody(body);
body.LinearFactor = Vector3.Zero;
body.AngularFactor = new Vector3(0, 1, 0);
bodyA = body;
cylA = new CylinderShape(0.2f, 0.26f, 0.2f);
cylB = new CylinderShape(L_2, 0.025f, L_2);
cyl0 = new CompoundShape();
cyl0.AddChildShape(Matrix.Identity, cylA);
cyl0.AddChildShape(Matrix.Identity, cylB);
mass = 6.28f;
cyl0.CalculateLocalInertia(mass, out localInertia);
ci = new RigidBodyConstructionInfo(mass, null, cyl0, localInertia);
Quaternion orn = Quaternion.RotationAxis(new Vector3(0, 0, 1), -THETA);
ci.StartWorldTransform = Matrix.RotationQuaternion(orn) * Matrix.Translation(-10, 2, -8);
body = new RigidBody(ci);//1,0,cyl0,localInertia);
body.LinearFactor = Vector3.Zero;
HingeConstraint hinge = new HingeConstraint(body, Vector3.Zero, new Vector3(0, 1, 0), true);
World.AddConstraint(hinge);
bodyB = body;
body.AngularVelocity = new Vector3(0, 3, 0);
World.AddRigidBody(body);
Vector3 axisA = new Vector3(0, 1, 0);
Vector3 axisB = new Vector3(0, 1, 0);
orn = Quaternion.RotationAxis(new Vector3(0, 0, 1), -THETA);
Matrix mat = Matrix.RotationQuaternion(orn);
axisB = new Vector3(mat.M21, mat.M22, mat.M23);
GearConstraint gear = new GearConstraint(bodyA, bodyB, axisA, axisB, RATIO);
World.AddConstraint(gear, true);
mass = 1.0f;
RigidBody body0 = LocalCreateRigidBody(mass, Matrix.Translation(0, 20, 0), shape);
RigidBody body1 = null;//LocalCreateRigidBody(mass, Matrix.Translation(2*CUBE_HALF_EXTENTS,20,0), shape);
//RigidBody body1 = LocalCreateRigidBody(0, Matrix.Translation(2*CUBE_HALF_EXTENTS,20,0), null);
//body1.ActivationState = ActivationState.DisableDeactivation;
//body1.SetDamping(0.3f, 0.3f);
Vector3 pivotInA = new Vector3(CubeHalfExtents, -CubeHalfExtents, -CubeHalfExtents);
Vector3 axisInA = new Vector3(0, 0, 1);
Vector3 pivotInB;
if (body1 != null)
{
Matrix transform = Matrix.Invert(body1.CenterOfMassTransform) * body0.CenterOfMassTransform;
pivotInB = Vector3.TransformCoordinate(pivotInA, transform);
}
else
{
pivotInB = pivotInA;
}
Vector3 axisInB;
if (body1 != null)
{
Matrix transform = Matrix.Invert(body1.CenterOfMassTransform) * body1.CenterOfMassTransform;
axisInB = Vector3.TransformCoordinate(axisInA, transform);
}
else
{
axisInB = Vector3.TransformCoordinate(axisInA, body0.CenterOfMassTransform);
}
#if P2P
{
TypedConstraint p2p = new Point2PointConstraint(body0, pivotInA);
//TypedConstraint p2p = new Point2PointConstraint(body0, body1, pivotInA, pivotInB);
//TypedConstraint hinge = new HingeConstraint(body0, body1, pivotInA, pivotInB, axisInA, axisInB);
World.AddConstraint(p2p);
p2p.DebugDrawSize = 5;
}
#else
{
hinge = new HingeConstraint(body0, pivotInA, axisInA);
//use zero targetVelocity and a small maxMotorImpulse to simulate joint friction
//float targetVelocity = 0.f;
//float maxMotorImpulse = 0.01;
const float targetVelocity = 1.0f;
const float maxMotorImpulse = 1.0f;
hinge.EnableAngularMotor(true, targetVelocity, maxMotorImpulse);
World.AddConstraint(hinge);
hinge.DebugDrawSize = 5;
}
#endif
RigidBody pRbA1 = LocalCreateRigidBody(mass, Matrix.Translation(-20, 0, 30), shape);
//RigidBody pRbA1 = LocalCreateRigidBody(0.0f, Matrix.Translation(-20, 0, 30), shape);
pRbA1.ActivationState = ActivationState.DisableDeactivation;
// add dynamic rigid body B1
RigidBody pRbB1 = LocalCreateRigidBody(mass, Matrix.Translation(-20, 0, 30), shape);
//RigidBody pRbB1 = LocalCreateRigidBody(0.0f, Matrix.Translation(-20, 0, 30), shape);
pRbB1.ActivationState = ActivationState.DisableDeactivation;
// create slider constraint between A1 and B1 and add it to world
SliderConstraint spSlider1 = new SliderConstraint(pRbA1, pRbB1, Matrix.Identity, Matrix.Identity, true);
//spSlider1 = new SliderConstraint(pRbA1, pRbB1, Matrix.Identity, Matrix.Identity, false);
spSlider1.LowerLinearLimit = -15.0f;
spSlider1.UpperLinearLimit = -5.0f;
spSlider1.LowerLinearLimit = 5.0f;
spSlider1.UpperLinearLimit = 15.0f;
spSlider1.LowerLinearLimit = -10.0f;
spSlider1.UpperLinearLimit = -10.0f;
spSlider1.LowerAngularLimit = -(float)Math.PI / 3.0f;
spSlider1.UpperAngularLimit = (float)Math.PI / 3.0f;
World.AddConstraint(spSlider1, true);
spSlider1.DebugDrawSize = 5.0f;
//create a slider, using the generic D6 constraint
Vector3 sliderWorldPos = new Vector3(0, 10, 0);
Vector3 sliderAxis = Vector3.UnitX;
const float angle = 0; //SIMD_RADS_PER_DEG * 10.f;
Matrix trans = Matrix.RotationAxis(sliderAxis, angle) * Matrix.Translation(sliderWorldPos);
d6body0 = LocalCreateRigidBody(mass, trans, shape);
d6body0.ActivationState = ActivationState.DisableDeactivation;
RigidBody fixedBody1 = LocalCreateRigidBody(0, trans, null);
World.AddRigidBody(fixedBody1);
Matrix frameInA = Matrix.Translation(0, 5, 0);
Matrix frameInB = Matrix.Translation(0, 5, 0);
//bool useLinearReferenceFrameA = false;//use fixed frame B for linear llimits
const bool useLinearReferenceFrameA = true; //use fixed frame A for linear llimits
spSlider6Dof = new Generic6DofConstraint(fixedBody1, d6body0, frameInA, frameInB, useLinearReferenceFrameA)
{
LinearLowerLimit = lowerSliderLimit,
LinearUpperLimit = hiSliderLimit,
//range should be small, otherwise singularities will 'explode' the constraint
//AngularLowerLimit = new Vector3(-1.5f,0,0),
//AngularUpperLimit = new Vector3(1.5f,0,0),
//AngularLowerLimit = new Vector3(0,0,0),
//AngularUpperLimit = new Vector3(0,0,0),
AngularLowerLimit = new Vector3((float)-Math.PI, 0, 0),
AngularUpperLimit = new Vector3(1.5f, 0, 0)
};
//spSlider6Dof.TranslationalLimitMotor.EnableMotor[0] = true;
spSlider6Dof.TranslationalLimitMotor.TargetVelocity = new Vector3(-5.0f, 0, 0);
spSlider6Dof.TranslationalLimitMotor.MaxMotorForce = new Vector3(0.1f, 0, 0);
World.AddConstraint(spSlider6Dof);
spSlider6Dof.DebugDrawSize = 5;
// create a door using hinge constraint attached to the world
CollisionShape pDoorShape = new BoxShape(2.0f, 5.0f, 0.2f);
CollisionShapes.Add(pDoorShape);
RigidBody pDoorBody = LocalCreateRigidBody(1.0f, Matrix.Translation(-5.0f, -2.0f, 0.0f), pDoorShape);
pDoorBody.ActivationState = ActivationState.DisableDeactivation;
Vector3 btPivotA = new Vector3(10.0f + 2.1f, -2.0f, 0.0f); // right next to the door slightly outside
Vector3 btAxisA = Vector3.UnitY; // pointing upwards, aka Y-axis
spDoorHinge = new HingeConstraint(pDoorBody, btPivotA, btAxisA);
//spDoorHinge.SetLimit(0.0f, (float)Math.PI / 2);
// test problem values
//spDoorHinge.SetLimit(-(float)Math.PI, (float)Math.PI * 0.8f);
//spDoorHinge.SetLimit(1, -1);
//spDoorHinge.SetLimit(-(float)Math.PI * 0.8f, (float)Math.PI);
//spDoorHinge.SetLimit(-(float)Math.PI * 0.8f, (float)Math.PI, 0.9f, 0.3f, 0.0f);
//spDoorHinge.SetLimit(-(float)Math.PI * 0.8f, (float)Math.PI, 0.9f, 0.01f, 0.0f); // "sticky limits"
spDoorHinge.SetLimit(-(float)Math.PI * 0.25f, (float)Math.PI * 0.25f);
//spDoorHinge.SetLimit(0, 0);
World.AddConstraint(spDoorHinge);
spDoorHinge.DebugDrawSize = 5;
RigidBody pDropBody = LocalCreateRigidBody(10.0f, Matrix.Translation(-5.0f, 2.0f, 0.0f), shape);
// create a generic 6DOF constraint
//RigidBody pBodyA = LocalCreateRigidBody(mass, Matrix.Translation(10.0f, 6.0f, 0), shape);
RigidBody pBodyA = LocalCreateRigidBody(0, Matrix.Translation(10, 6, 0), shape);
//RigidBody pBodyA = LocalCreateRigidBody(0, Matrix.Translation(10, 6, 0), null);
pBodyA.ActivationState = ActivationState.DisableDeactivation;
RigidBody pBodyB = LocalCreateRigidBody(mass, Matrix.Translation(0, 6, 0), shape);
//RigidBody pBodyB = LocalCreateRigidBody(0, Matrix.Translation(0, 6, 0), shape);
pBodyB.ActivationState = ActivationState.DisableDeactivation;
frameInA = Matrix.Translation(-5, 0, 0);
frameInB = Matrix.Translation(5, 0, 0);
Generic6DofConstraint pGen6DOF = new Generic6DofConstraint(pBodyA, pBodyB, frameInA, frameInB, true);
//Generic6DofConstraint pGen6DOF = new Generic6DofConstraint(pBodyA, pBodyB, frameInA, frameInB, false);
pGen6DOF.LinearLowerLimit = new Vector3(-10, -2, -1);
pGen6DOF.LinearUpperLimit = new Vector3(10, 2, 1);
//pGen6DOF.LinearLowerLimit = new Vector3(-10, 0, 0);
//pGen6DOF.LinearUpperLimit = new Vector3(10, 0, 0);
//pGen6DOF.LinearLowerLimit = new Vector3(0, 0, 0);
//pGen6DOF.LinearUpperLimit = new Vector3(0, 0, 0);
//pGen6DOF.TranslationalLimitMotor.EnableMotor[0] = true;
//pGen6DOF.TranslationalLimitMotor.TargetVelocity = new Vector3(5, 0, 0);
//pGen6DOF.TranslationalLimitMotor.MaxMotorForce = new Vector3(0.1f, 0, 0);
//pGen6DOF.AngularLowerLimit = new Vector3(0, (float)Math.PI * 0.9f, 0);
//pGen6DOF.AngularUpperLimit = new Vector3(0, -(float)Math.PI * 0.9f, 0);
//pGen6DOF.AngularLowerLimit = new Vector3(0, 0, -(float)Math.PI);
//pGen6DOF.AngularUpperLimit = new Vector3(0, 0, (float)Math.PI);
pGen6DOF.AngularLowerLimit = new Vector3(-(float)Math.PI / 4, -0.75f, -(float)Math.PI * 0.4f);
pGen6DOF.AngularUpperLimit = new Vector3((float)Math.PI / 4, 0.75f, (float)Math.PI * 0.4f);
//pGen6DOF.AngularLowerLimit = new Vector3(0, -0.75f, (float)Math.PI * 0.8f);
//pGen6DOF.AngularUpperLimit = new Vector3(0, 0.75f, -(float)Math.PI * 0.8f);
//pGen6DOF.AngularLowerLimit = new Vector3(0, -(float)Math.PI * 0.8f, (float)Math.PI * 1.98f);
//pGen6DOF.AngularUpperLimit = new Vector3(0, (float)Math.PI * 0.8f, -(float)Math.PI * 1.98f);
//pGen6DOF.AngularLowerLimit = new Vector3(-0.75f, -0.5f, -0.5f);
//pGen6DOF.AngularUpperLimit = new Vector3(0.75f, 0.5f, 0.5f);
//pGen6DOF.AngularLowerLimit = new Vector3(-0.75f, 0, 0);
//pGen6DOF.AngularUpperLimit = new Vector3(0.75f, 0, 0);
//pGen6DOF.AngularLowerLimit = new Vector3(0, -0.7f, 0);
//pGen6DOF.AngularUpperLimit = new Vector3(0, 0.7f, 0);
//pGen6DOF.AngularLowerLimit = new Vector3(-1, 0, 0);
//pGen6DOF.AngularUpperLimit = new Vector3(1, 0, 0);
// create a ConeTwist constraint
pBodyA = LocalCreateRigidBody(1.0f, Matrix.Translation(-10, 5, 0), shape);
//pBodyA = LocalCreateRigidBody(0, Matrix.Translation(-10, 5, 0), shape);
pBodyA.ActivationState = ActivationState.DisableDeactivation;
pBodyB = LocalCreateRigidBody(0, Matrix.Translation(-10, -5, 0), shape);
//pBodyB = LocalCreateRigidBody(1.0f, Matrix.Translation(-10, -5, 0), shape);
frameInA = Matrix.RotationYawPitchRoll(0, 0, (float)Math.PI / 2);
frameInA *= Matrix.Translation(0, -5, 0);
frameInB = Matrix.RotationYawPitchRoll(0, 0, (float)Math.PI / 2);
frameInB *= Matrix.Translation(0, 5, 0);
coneTwist = new ConeTwistConstraint(pBodyA, pBodyB, frameInA, frameInB);
//coneTwist.SetLimit((float)Math.PI / 4, (float)Math.PI / 4, (float)Math.PI * 0.8f);
//coneTwist.SetLimit((((float)Math.PI / 4) * 0.6f), (float)Math.PI / 4, (float)Math.PI * 0.8f, 1.0f); // soft limit == hard limit
coneTwist.SetLimit((((float)Math.PI / 4) * 0.6f), (float)Math.PI / 4, (float)Math.PI * 0.8f, 0.5f);
World.AddConstraint(coneTwist, true);
coneTwist.DebugDrawSize = 5;
// Hinge connected to the world, with motor (to hinge motor with new and old constraint solver)
RigidBody pBody = LocalCreateRigidBody(1.0f, Matrix.Identity, shape);
pBody.ActivationState = ActivationState.DisableDeactivation;
Vector3 pivotA = new Vector3(10.0f, 0.0f, 0.0f);
btAxisA = new Vector3(0.0f, 0.0f, 1.0f);
HingeConstraint pHinge = new HingeConstraint(pBody, pivotA, btAxisA);
//pHinge.EnableAngularMotor(true, -1.0f, 0.165f); // use for the old solver
pHinge.EnableAngularMotor(true, -1.0f, 1.65f); // use for the new SIMD solver
World.AddConstraint(pHinge);
pHinge.DebugDrawSize = 5;
// create a universal joint using generic 6DOF constraint
// create two rigid bodies
// static bodyA (parent) on top:
pBodyA = LocalCreateRigidBody(0, Matrix.Translation(20, 4, 0), shape);
pBodyA.ActivationState = ActivationState.DisableDeactivation;
// dynamic bodyB (child) below it :
pBodyB = LocalCreateRigidBody(1.0f, Matrix.Translation(20, 0, 0), shape);
pBodyB.ActivationState = ActivationState.DisableDeactivation;
// add some (arbitrary) data to build constraint frames
Vector3 parentAxis = new Vector3(1, 0, 0);
Vector3 childAxis = new Vector3(0, 0, 1);
Vector3 anchor = new Vector3(20, 2, 0);
UniversalConstraint pUniv = new UniversalConstraint(pBodyA, pBodyB, anchor, parentAxis, childAxis);
pUniv.SetLowerLimit(-(float)Math.PI / 4, -(float)Math.PI / 4);
pUniv.SetUpperLimit((float)Math.PI / 4, (float)Math.PI / 4);
// add constraint to world
World.AddConstraint(pUniv, true);
// draw constraint frames and limits for debugging
pUniv.DebugDrawSize = 5;
World.AddConstraint(pGen6DOF, true);
pGen6DOF.DebugDrawSize = 5;
// create a generic 6DOF constraint with springs
pBodyA = LocalCreateRigidBody(0, Matrix.Translation(-20, 16, 0), shape);
pBodyA.ActivationState = ActivationState.DisableDeactivation;
pBodyB = LocalCreateRigidBody(1.0f, Matrix.Translation(-10, 16, 0), shape);
pBodyB.ActivationState = ActivationState.DisableDeactivation;
frameInA = Matrix.Translation(10, 0, 0);
frameInB = Matrix.Identity;
Generic6DofSpringConstraint pGen6DOFSpring = new Generic6DofSpringConstraint(pBodyA, pBodyB, frameInA, frameInB, true)
{
LinearUpperLimit = new Vector3(5, 0, 0),
LinearLowerLimit = new Vector3(-5, 0, 0),
AngularLowerLimit = new Vector3(0, 0, -1.5f),
AngularUpperLimit = new Vector3(0, 0, 1.5f),
DebugDrawSize = 5
};
World.AddConstraint(pGen6DOFSpring, true);
pGen6DOFSpring.EnableSpring(0, true);
pGen6DOFSpring.SetStiffness(0, 39.478f);
pGen6DOFSpring.SetDamping(0, 0.5f);
pGen6DOFSpring.EnableSpring(5, true);
pGen6DOFSpring.SetStiffness(5, 39.478f);
pGen6DOFSpring.SetDamping(0, 0.3f);
pGen6DOFSpring.SetEquilibriumPoint();
// create a Hinge2 joint
// create two rigid bodies
// static bodyA (parent) on top:
pBodyA = LocalCreateRigidBody(0, Matrix.Translation(-20, 4, 0), shape);
pBodyA.ActivationState = ActivationState.DisableDeactivation;
// dynamic bodyB (child) below it :
pBodyB = LocalCreateRigidBody(1.0f, Matrix.Translation(-20, 0, 0), shape);
pBodyB.ActivationState = ActivationState.DisableDeactivation;
// add some data to build constraint frames
parentAxis = new Vector3(0, 1, 0);
childAxis = new Vector3(1, 0, 0);
anchor = new Vector3(-20, 0, 0);
Hinge2Constraint pHinge2 = new Hinge2Constraint(pBodyA, pBodyB, anchor, parentAxis, childAxis);
pHinge2.SetLowerLimit(-(float)Math.PI / 4);
pHinge2.SetUpperLimit((float)Math.PI / 4);
// add constraint to world
World.AddConstraint(pHinge2, true);
// draw constraint frames and limits for debugging
pHinge2.DebugDrawSize = 5;
// create a Hinge joint between two dynamic bodies
// create two rigid bodies
// static bodyA (parent) on top:
pBodyA = LocalCreateRigidBody(1.0f, Matrix.Translation(-20, -2, 0), shape);
pBodyA.ActivationState = ActivationState.DisableDeactivation;
// dynamic bodyB:
pBodyB = LocalCreateRigidBody(10.0f, Matrix.Translation(-30, -2, 0), shape);
pBodyB.ActivationState = ActivationState.DisableDeactivation;
// add some data to build constraint frames
axisA = new Vector3(0, 1, 0);
axisB = new Vector3(0, 1, 0);
Vector3 pivotA2 = new Vector3(-5, 0, 0);
Vector3 pivotB = new Vector3(5, 0, 0);
spHingeDynAB = new HingeConstraint(pBodyA, pBodyB, pivotA2, pivotB, axisA, axisB);
spHingeDynAB.SetLimit(-(float)Math.PI / 4, (float)Math.PI / 4);
// add constraint to world
World.AddConstraint(spHingeDynAB, true);
// draw constraint frames and limits for debugging
spHingeDynAB.DebugDrawSize = 5;
}
public SliderConstraint CreateSliderConstraint(RigidBody rbA, RigidBody rbB, ref Matrix frameInA, ref Matrix frameInB, bool useLinearReferenceFrameA)
{
SliderConstraint constraint = new SliderConstraint(rbA, rbB, frameInA, frameInB, useLinearReferenceFrameA);
_allocatedConstraints.Add(constraint);
return constraint;
}
public static OpenTK.Matrix4 GetFrameOffsetA(this SliderConstraint obj)
{
OpenTK.Matrix4 value;
GetFrameOffsetA(obj, out value);
return(value);
}
public static OpenTK.Matrix4 GetCalculatedTransformB(this SliderConstraint obj)
{
OpenTK.Matrix4 value;
GetCalculatedTransformB(obj, out value);
return(value);
}
//called by Physics World just before constraint is added to world.
//the current constraint properties are used to rebuild the constraint.
internal override bool _BuildConstraint()
{
BPhysicsWorld world = BPhysicsWorld.Get();
if (m_constraintPtr != null) {
if (m_isInWorld && world != null) {
m_isInWorld = false;
world.RemoveConstraint(m_constraintPtr);
}
}
BRigidBody targetRigidBodyA = GetComponent<BRigidBody>();
if (targetRigidBodyA == null)
{
Debug.LogError("BSliderConstraint needs to be added to a component with a BRigidBody.");
return false;
}
if (!targetRigidBodyA.isInWorld)
{
world.AddRigidBody(targetRigidBodyA);
}
RigidBody rba = (RigidBody) targetRigidBodyA.GetCollisionObject();
if (rba == null) {
Debug.LogError("Constraint could not get bullet RigidBody from target rigid body");
return false;
}
if (m_constraintType == ConstraintType.constrainToAnotherBody)
{
if (m_otherRigidBody == null)
{
Debug.LogError("Other rigid body was not set");
return false;
}
if (!m_otherRigidBody.isInWorld)
{
world.AddRigidBody(m_otherRigidBody);
}
RigidBody rbb = (RigidBody) m_otherRigidBody.GetCollisionObject();
if (rbb == null)
{
Debug.LogError("Constraint could not get bullet RigidBody from target rigid body");
return false;
}
BM.Matrix frameInA, frameInOther;
string errormsg = "";
if (CreateFramesA_B(m_localConstraintAxisX, m_localConstraintAxisY, m_localConstraintPoint, out frameInA, out frameInOther, ref errormsg))
{
m_constraintPtr = new SliderConstraint(rbb, rba, frameInOther, frameInA, true);
} else
{
Debug.LogError(errormsg);
return false;
}
} else
{
BulletSharp.Math.Matrix frameInA = BM.Matrix.Identity;
string errormsg = "";
if (CreateFrame(m_localConstraintAxisX, m_localConstraintAxisY, m_localConstraintPoint, ref frameInA, ref errormsg))
{
m_constraintPtr = new SliderConstraint(rba, frameInA, true);
} else
{
Debug.LogError(errormsg);
return false;
}
}
SliderConstraint sl = (SliderConstraint)m_constraintPtr;
sl.LowerLinearLimit = m_lowerLinearLimit;
sl.UpperLinearLimit = m_upperLinearLimit;
sl.LowerAngularLimit = m_lowerAngularLimitRadians;
sl.UpperAngularLimit = m_upperAngularLimitRadians;
m_constraintPtr.Userobject = this;
m_constraintPtr.DebugDrawSize = m_debugDrawSize;
m_constraintPtr.BreakingImpulseThreshold = m_breakingImpulseThreshold;
return true;
}